# How to write a Memory Scanner using C#

, 23 Sep 2006 CPOL
 Rate this:
Search a process' memory to find specified 16, 32 or 64 bit data values.

## Introduction

Have you ever had a problem completing a game because your health meter shows just 5% of your health available?
Have you ever used a game trainer to solve this problem?
Have you ever wondered how this trainer freezes your health meter to 100%?
These game trainers, do a simple job!
They write a little part of the Game's memory with the 100 `value`!
But how to find the exact part of memory?

## The Question and the Answer

Q: How to find the location in which a program stores a `value` in its memory?
A: Some programs named 'Memory Scanners', are written to read and search a program's memory for exact location and help freezing it! (And I have written this article to show you, how to write a 'Memory Scanner')

## Step 1: Where to begin?

Let's have a look at a program's memory.
Think that I have written a program and we can have a look at its memory.
To have a picture in mind, we can say, it looks something like this:

As you can see, the memory is made up of a huge number of small sectors, that hold a `value` in it. Our picture, just shows a small part of the memory, from sector 0 to sector 99 and a detail of sector 0 to sector 15. But as you know, a computer just knows the meaning of 0 and 1, so what do these Hexadecimal `value`s mean?

Let's take a deep look at the memory again.

As you can see, every byte is made up of 8 bits with each of them being just that 1 or 0, and in Binary mode, they can return the `value` stored in the byte((00010111)2 = (23)10 = (17)16).

As we saw, a computer's memory stores information by holding the 0 and 1s in the memory bits, and 8 bits of memory make a section of memory named byte, so a byte can hold `value`s up to (11111111)2 = (255)10 = (FF)16, but how about the bigger `value`s?
We usually work with `value`s greater than 255!
Ok, the answer is that, we have bigger units of memory to hold the bigger `value`s.

Let's look at another picture of memory that shows the bigger units and then, I will explain everything:

So we have 3 bigger memory units: 2 `Bytes` that make a 16 bit memory unit that we call 'short' in C#, 4 `Bytes` that make a 32 bit memory unit that we call it 'int' in C#, and 8 `Bytes` that make a 64 bit memory unit, and we call it 'long' in C#.

## Step 2: What to look for?

Now that we have a simple picture of the memory in our mind, let's go back to the first picture:

I know that, you are going to say: "Hey, it's just a row of `bytes`! How to find the memory units?" And then I'll tell you that, you asked the biggest question in writing a memory scanner!

Ok, let's think that it's a part of the memory of my program, and I know, where in the memory, I have stored the `value`s and I will show you that:

As you see, a memory unit, can be stored in any part of the memory and start from any memory sector. In this program for example, I have stored a 32 bit `value` in the 0 sector, and because a 32 bit `value` takes 4 `bytes` of memory, from the sector 0 to sector 3 is assigned for a 32 bit variable in the program, and after that, from the sector 4, there is a 16 bit variable that takes 2 `bytes` of memory, next is a 64 bit variable and at the end, there is again a 16 bit variable.

Now let's think that the `value`s of the sectors are the same, but the memory units start from different sectors:

Why everything changed?
Because, a variable could be stored in any memory sector number, and most of the time, even the programmer doesn't know, where the variable is stored in the memory, and just the program knows it!

## Step 3: Where to find it?

Now, let's think that we are playing a game, and the health meter shows 83%, and we don't know the location of the variable in the memory and we want to find the variable and we start from sector 0, so the memory looks like this:

So what? Is there any 83 in the memory?
First, we know that we have the hexadecimal `value`s of the memory `bytes`. Second, we should guess the variable type to look for.

Ok, let's say that the programmers of the game have used a 32 bit (int) variable, that is the most usual data type being used for storing the `value` of the health meter. So the `value` is stored in a 4 `bytes` long part of the memory. But, how to find it?
The only way to search the memory completely, is to start from the beginning, take 4 `bytes`, test them to see if the `value` equals our digit (here 83), and find the location. Like this:

Ok, now you know the main concept of memory scanning, but there are some other things that you should know to be able to write the Memory scanner:

1. Q: How long is a program's memory? (Where to begin and where to stop?)
A: As you know, Microsoft's first OS was DOS that was a 8 bit OS, after that, the Windows 3.1 became a 16 bit OS, and after that, the Windows OS became a 32 bit OS. (I'm a real fan of Apple Co. that developed the Apple Macintosh OS, a 64 bit OS, exactly when Microsoft was working on DOS (a 8 bit OS) and today, Microsoft is going to write a 64 bit Windows (and like the first Windows versions, it still looks like the Apple OSs) but, I still recommend Apple MacOS X (Ver. 10)).
So, in the DOS OS that was a 8 bit OS, programmers named 8 bits of memory, a "Byte". After that, When the Windows 3.1 OS was a 16 bit OS, they named 16 bits of memory(2 `Bytes`) a "WORD", and 32 bits of memory(4 `Bytes`) a "DWORD"(Double Word) and 64 bits of memory(8 `Bytes`) a "QWORD"(Quad Word).
As I experienced, the length of every program's memory in Windows XP, is from "0x00000000" to the maximum `value` of a "Int"("DWORD"), and equals to "0x7FFFFFFF".
I'm not sure, but I guess, it's because of that, the Windows is a 32 bit OS and the main memory unit for it, is a 32 bit memory unit, and so, the length of a program's memory, is the maximum `value` of a 32 bit memory unit!
Ok. So, we should start our search from "0x0000000" to "0x7FFFFFFF".
2. Q: Is the first found memory address, the exact answer of our search?
A: No! As you can see, there are "0x7FFFFFFF" sectors, and when you search it for a `value` like 83, you could find so many of them. So you need to hold the memory addresses and wait for the `value`s to be changed. Then search the addresses you have, for the new `value`, and do this, until you find, just one memory address that matches your `value`.
3. Q: How to read a program's memory and search it?
A: There are some functions in Windows API that make it possible for us to read and write the memory, from another program.
Thanks goes to "Arik Poznanski" for P/Invokes and methods needed to read and write the Memory, I just used his classes to do this and didn't do the P/Invokes myself.
You can search Codeproject.com, for "Minesweeper, Behind the scenes", to find his comments about these classes.
4. Q: How to convert these `bytes` to a 16, 32 or 64 bit `value`?
A: For this, we used .NET goods! There is a class with static methods that does this for us:

```byte[] bytes = new byte[] { 0x53, 0x00, 0x00, 0x00 };
int value = System.BitConverter.ToInt32(bytes, 0);
//The value is 83
```

## Step 4: Let's do the final job

Ok, now you have all the information you need to write the memory scanner.
You just need to do these in your code:

1. Select a process to scan its memory.
2. Scan the whole memory for the specified `value` and hold the addresses.
3. Wait for the `value` to be changed and search the memory address list that you got from the first scan and again wait for the `value` to be changed and scan again, and do this until you find just the address that matches the `value`.
4. At the end, you can freeze the address with a new `value`, by using a timer to write the memory in every timer's tick.

If you download my code, you will find them with comments for every command and every line of code. But there it a little thing I should explain:

`ReadProcessMemory(IntPtr MemoryAddress, uint bytesToRead, out int bytesRead)` that is the most important function, returns an empty `bytes` array if reading your request's size is too big! So I had to read the memory in parts as big as 20480 `bytes` (20KB), and because, when you are searching these memory parts, byte by byte, at the end of the `bytes` array, there will be some `bytes` left! (for example, 3 `bytes` will be left when you are searching for 32 bit `value`s)!

```if (/*scan requirement is less than 20480 bytes*/)
{
}
else
{
/*Loop through blocks(of length 20480 bytes),
until the whole memory is read;

After the first loop, move the current address to
[Data type bytes count - 1] steps back in the memory,
to fix the previously told problem;

After the loops, check to see if any other memory addresses
are left outside of the loops and if so, read them;*/
}
```

You can see it:

## That's all

Ok folks, that's all! Hope you like and enjoy it!
And now I'm working on a Enhanced Memory Scanner that could scan all types of data, including the `Bytes`, Signed Data Types and even Strings, it just takes some time!
I'll be back soon.

## Share

CEO Atrin Design Group
Iran (Islamic Republic Of)
MVC/SPA designer and programmer.
C# programmer on .net/mono/monomac/monotouch/monodroid frameworks.
jQuery/Knockout/Angular programmer.
And has been working since 2002.

 First PrevNext
 Hi Sojaner MegaTh123 26-Feb-14 7:48
 Re: Hi Sojaner Sojaner 26-Feb-14 11:29
 My vote of 5 Ritschy 24-Jun-13 0:53
 Re: My vote of 5 Sojaner 8-Jul-13 12:42
 yaw, pitch and roll Larissa Schön 3-Aug-12 14:57
 DOS != 8Bit moritz94 31-May-12 23:51
 Re: DOS != 8Bit Sojaner 1-Jun-12 2:34
 Re: DOS != 8Bit moritz94 1-Jun-12 4:05
 strings Kurtis Shafer 25-May-12 9:16
 Re: strings Sojaner 27-May-12 11:03
 Re: strings Kurtis Shafer 29-May-12 7:50
 Re: strings Sojaner 1-Jun-12 2:45
 My vote of 5 iliabest 19-Jan-12 6:31
 Re: My vote of 5 Sojaner 24-Feb-12 13:10
 Need to search String please. AbuS3ood 8-Jul-11 7:21
 Re: Need to search String please. Sojaner 11-Jul-11 18:48
 Re: Need to search String please. AbuS3ood 11-Jul-11 21:41
 Re: Need to search String please. AbuS3ood 12-Jul-11 5:41
 Re: Need to search String please. Sojaner 24-Feb-12 13:13
 Game statistics in real-time haxballfan 6-Jul-11 9:56
 Re: Game statistics in real-time Sojaner 11-Jul-11 18:40
 Re: Game statistics in real-time haxballfan 13-Jul-11 7:23
 My vote of 5 Sagar (Sea) 14-Dec-10 14:36
 Re: My vote of 5 Sojaner 13-Jun-11 1:30
 how to scan a float value Member 4562776 12-Nov-10 1:46
 Re: how to scan a float value Sojaner 12-Nov-10 2:29
 My vote of 5 Baesky 11-Sep-10 4:39
 Re: My vote of 5 Member 4562776 12-Nov-10 1:47
 Re: My vote of 5 Sojaner 12-Nov-10 2:33
 Performance of Sojaner Scanner Cpt Balu 27-Aug-10 22:30
 Re: Performance of Sojaner Scanner cskult 26-Apr-11 10:12
 nice article! Baesky 18-Aug-10 18:52
 Re: nice article! Sojaner 13-Jun-11 1:39
 Sojanner let see asskiller 13-Mar-10 10:36
 Your Memory Scanner , is work in Games On-line ? Grand Chase and Gunbound , Scan work's ?
 Re: Sojanner let see Cpt Balu 27-Aug-10 22:17
 String search example required Extreme_man 1-Mar-10 23:45
 Re: String search example required Sojaner 13-Jun-11 2:00
 increase speed of memory search code by over 50% rhboarder 23-Sep-09 18:11
 i need help mansan_mansur 5-Sep-09 11:13
 Need HELP!!!!!!!!!!!!! Pavel Rumberg 4-Sep-09 8:40
 Characters and Strings? Kasperlitheater 30-Jul-09 15:35
 Re: Characters and Strings? Jordanwb 27-Oct-09 17:27
 Re: Characters and Strings? dzCepheus 8-Oct-10 9:22
 SOJANER I NEED YOUR HELP :) Goor 23-Jul-09 11:29
 Re: SOJANER I NEED YOUR HELP :) Sojaner 29-Jul-09 22:45
 Last Visit: 31-Dec-99 19:00     Last Update: 19-Dec-14 6:22 Refresh 12 Next »