
Comments and Discussions



hello viewres
please give your suggestions. im having a dfx object and i want to cut the object in slicing means im having 10/10 mm squere object. i want it to cut it in 10 parts so each part is containing 10 mm width and 1 mm height. and i also need it's vertex values in opengl.
so please send me the suggestions.
any suggestion most welcome
hi





I found this routine sometimes produces incorrect tesselation. When certain points in the polygon winding are colinear, it can skip over them and produce triangles outside of the original polygon.
My fix simply classifies points on the edge of the test triangle as 'inside' instead of 'outside'. This appears to be a stable and beneficial fix so far.
Example Input:
poly normal (0.000f,0.500f,0.866f)
poly points
(0.700f,6.500f,4.071f) // 0
(0.700f,5.500f,3.494f) // 1 This point gets misclassified with 2,8,9 triangle
(1.700f,5.500f,3.494f) // 2
(1.700f,6.500f,4.071f) // 3
(2.500f,6.500f,4.071f) // 4
(7.300f,1.700f,1.300f) // 5
(11.300f,1.700f,1.300f) // 6
(7.500f,5.500f,3.494f) // 7
(4.300f,5.500f,3.494f) // 8
(4.300f,6.500f,4.071f) // 9
Old Code in function IsPointInside():
pmq2.Vector(m_e1,ntmp); if( (B0=m_N.Dot(ntmp)) <= 0.0 ) return false;
m_e0.Vector(pmq2,ntmp); if( (B1=m_N.Dot(ntmp)) <= 0.0 ) return false;
return ( (m_AB0B1) > 0.0 ? true : false );
New Code:
pmq2.Vector(m_e1,ntmp); if( (B0=m_N.Dot(ntmp)) < 0.0 ) return false;
m_e0.Vector(pmq2,ntmp); if( (B1=m_N.Dot(ntmp)) < 0.0 ) return false;
return ( (m_AB0B1) < 0.0 ? false : true);
Helpful explaination of internal variables:
//...........^.....
//.........I/......
//.N......./.......
//.^...e0./........
//....../__>p...
//....K.\.........
//........\...A....
//......e1.\.......
//..........\......
//...........v.....
//..........J......
//(I replaced spaces with dots as they were not preserved in post?)
//
// I,J,K (points of current test triangle, indices or indirect indices)
// e0,e1 (edges from IK, JK)
// A (Area of current triangle, is actually area*2)
// N (Normal of current triangle, not unit length)
//
// p Test point if in current triangle.
//
Edit....
Further testing shows that neither the old or new code correctly and consistently handles coincident and colinear points. (Eg. An example of a coincident point, is a Figure '8' polygons that does not actually cross over, just converges in the middle.)
Example Input:
// Eg. Coincident point, figure 8 style
poly normal (0.000f,0.500f,0.866f)
poly points
(1.700f,6.300f,2.801f)
(4.300f,3.700f,1.300f)
(5.700f,3.700f,1.300f)
(7.000f,5.000f,2.051f)
(8.300f,3.700f,1.300f)
(9.300f,3.700f,1.300f)
(8.000f,5.000f,2.051f)
(7.000f,5.000f,2.051f)
(1.700f,10.300f,5.111f)
This should help more with coincident points:
Old code in IsAnyPointInside():
if( ( ip < i  ip > k ) &&
IsPointInside(points[m_nIndex[ip]],points[ik]) )
{
return true;
}
New code:
if( ip < i  ip > k )
{
// NOTE: This is Vector3 exact equality test
if( points[m_nIndex[ip]].Equal(points[m_nIndex[i]])
 points[m_nIndex[ip]].Equal(points[m_nIndex[j]])
 points[m_nIndex[ip]].Equal(points[m_nIndex[k]])
)
{
continue; // Identical points are not inside, they do not hurt turns
}
if( IsPointInside(points[m_nIndex[ip]],points[ik]) )
{
return true;
}
}
If topus's suggested change is valid, it should read
//
// j is alligned from i to k ?
//
if( ((FLT_EPSILON) < m_A && m_A < FLT_EPSILON)  // Area OR Poor Normal
((FLT_EPSILON) < m_N[0] && m_N[0] < FLT_EPSILON &&
(FLT_EPSILON) < m_N[1] && m_N[1] < FLT_EPSILON &&
(FLT_EPSILON) < m_N[2] && m_N[2] < FLT_EPSILON ))
return degenerate;
// NOTE: This code is more efficient on PC with eg. 'fabsf(m_A) <= FLT_EPSILON' to reduce float compares.
Also note that you can help the algorithm by removing 'junk' before processing. Eg. project 3D points onto plane (of which normal is used). Remove degeneracies like coincident and colinear points. Snapping and merging points may help, but could lead to badsnaps that cause self intersections.
Edit:
I have found another case which I believe shows a flaw in the algorithm. As 'ears' are clipped off the polygon, the remaining polygon can become self intersecting and fail 'point in poly' test, to produce triangles outside the original shape.
Example input:
poly normal(0,0,1)
(10.52881622f,1.25890017f,0.00000000f)
(10.52881241f,0.24110639f,0.00000000f)
(1.47119045f,0.24110317f,0.00000000f)
(1.47119141f,1.25889719f,0.00000000f)
(4.52881575f,1.25890088f,0.00000000f)
(4.52881479f,3.25889254f,0.00000000f)
(6.08583260f,3.25889111f,0.00000000f)
(6.08583069f,1.25889945f,0.00000000f)
The fix:
in function Triangulate()
in 'case convex :'
in else, after 'RemoveVertex'
// Advance to preserve poly integrity
i = j;
j = k;
k++;
This allows the point AFTER the removed triangle point to be the start of the next test triangle. This helps with near colinear points that fan out from an otherwise stationary start point.
Edit:
There are still issues with the code. The bottom line is that the original algorithm does not handle simple noncovex polys with colinear, but non intersecting segments. The overall algorithm does not handle polygons that intersect in anyway, including at single points, though it often produces a correct or near correct result.
Please comment on this.





In my crossplatform c++ framework ( www.amanith.org ) i've implemented a fast sweepline tesselator that can handle non simple polygons with holes , and some common degenerations.
For every questions abuot this, email me at: mfabbri@amanith.org





You had implemented it?
My god! Your code is too similiar to SGI/libtess.
Such functions as "sweepevent", "TessellateMonotoneRegion" ..., are almost the same to SGI/libtess.
I suggest you add " Thanks to SGI/libtess " in the header.
Hey, kavenger,
you should not always call "AddContourPoint",
If you had research the struct of Mesh carefully,you can add all your vertex once together. This can make you function 100% faster.
============================
Gods know that I really love you from the bottom of my heart,but I forget to tell you that...





Hey Liu,
I have read all libtess sources/docs, and got inspired during the writing of my tessellator, as weel as for another good paper, that explain the sweepline algorithm in details ( http://www.cs.ucsb.edu/~suri/cs235/Triangulation.pdf ).So, yes, i'll follow your suggestion adding the greetings to SGI.
My decision to rewite a tesselator instead of using the libtess ones is due to the fact that i had a try to be more robust and support more degeneration cases, without to introduce overheads of any kind.
Anyway, now, i'm oriented in a direction to use OpenGL drawing tecniques that don't need of the tesselation step, beacuse this step is too expensive, and it needs a too high robustness level.
Just for curiosity,
Are you using Amanith? Do u use the tessellation for drawing purposes or for something other?
( my mail is: mfabbri ]at[ amanith ]dot[ org )





Change the line:
for( register int i=0 , j=1 ; j < nPoints ; i++ , j++ ){
to:
for( register int i=0 , j=1 ; i < nPoints ; i++ , j++, j=j%nPoints ){
and normal of the polygon will be calculated correctly.
Torsten





It could be better for performance issue to exclude the case of last j from the for loop, in order not to compute the modulo each time.
I would do :
normal[0]=normal[1]=normal[2]=0.0f;
for( register int i=0 , j=1 ; j < nPoints ; i++ , j++ ){
normal[0]+= ( points[i][1]  points[j][1] ) * ( points[i][2] + points[j][2] ) ;
normal[1]+= ( points[i][2]  points[j][2] ) * ( points[i][0] + points[j][0] ) ;
normal[2]+= ( points[i][0]  points[j][0] ) * ( points[i][1] + points[j][1] ) ;
}
// last case :
normal[0]+= ( points[i][1]  points[0][1] ) * ( points[i][2] + points[0][2] ) ;
normal[1]+= ( points[i][2]  points[0][2] ) * ( points[i][0] + points[0][0] ) ;
normal[2]+= ( points[i][0]  points[0][0] ) * ( points[i][1] + points[0][1] ) ;

It would also be a good idea to delete Vector3F array in CPolyTryView::OnDraw(CDC* pDC) after call to triangulate() to avoid memory leaks !





Area computation is bugged :
you should add in CPolyTriView::OnDraw()
existing :
//
for( int i=0 ; i < m_nPoints ; i++ ){
points[i][0] = m_points[i].x;
points[i][1] = m_points[i].y;
if( i ) Area+= ( m_points[i].x * m_points[i1].y  m_points[i1].x * m_points[i].y) * 0.5f;
}
//
// added after for loop :
Area += ( m_points[0].x * m_points[i1].y  m_points[i1].x * m_points[0].y) * 0.5f;
Also, if area computation is only used for normal deduction, you can avoid *0.5f as it will not change area sign.





Thanks for the code.
Martin





Thank you very much for this example!
It's the simple and best tesselation
algorithm I found over the internet!
I found a special case that popup an
index range error (very hard to find!!! )
in the Triangulate function.
The "k" index missed 2 hits because it
starts at k=2... So I did a little patch!
New loop:
for( int i=0 , j=1 , k=2 ; k < nVertex+3 ; )
New indexes:
int ib = i % nVertex;
int jb = j % nVertex;
int kb = k % nVertex;
Here is the modified function:
// BEGIN
int nTriangle= 0;
int nVertex = nCount;
//
AllocIndex(nCount);
//
bool bNoErrors = true;
//
while( nVertex > 3 && bNoErrors )
{
//
// tri to remove one vertex...
//
bNoErrors = false;
//
for( int i=0 , j=1 , k=2 ; k < nVertex+3 ; )
{
if( nVertex == 0 )
break;
int ib = i % nVertex;
int jb = j % nVertex;
int kb = k % nVertex;
//
switch( TriangleArea(points,
m_nIndex[ib],
m_nIndex[jb],
m_nIndex[kb],
normal) )
{
//
// ok. flush face && remove vertex j
//
case convex :
//
// Testing containement
//
if( IsAnyPointInside(points,ib,jb,kb,nVertex) ){
//
// go ahead..
//
i = j;
j = k;
k++;
}
else
{
nTriangle++;
AddFace(points,m_nIndex[ib],m_nIndex[jb],m_nIndex[kb]);
//
// remove vertex j
//
nVertex = RemoveVertex(jb, nVertex);
bNoErrors= true;
}
break;
case concave :
//
// go ahead..
//
i = j;
j = k;
k++;
break;
case degenerate :
//
// remove vertex j
//
nVertex = RemoveVertex(jb, nVertex);
bNoErrors= true;
break;
}
}
}
return nTriangle;
// END
TruePyroman







General News Suggestion Question Bug Answer Joke Rant Admin Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.

First Posted  6 Feb 2002 
Views  162,953 
Downloads  1,312 
Bookmarked  21 times 

