Click here to Skip to main content
15,861,168 members
Articles / Desktop Programming / ATL
Article

Building an Office2K COM addin with VC++/ATL

Rate me:
Please Sign up or sign in to vote.
4.95/5 (110 votes)
30 Apr 200320 min read 1.5M   5.1K   224   638
This article shows how to program an Outlook2000/2K+ COM addin using a pure ATL COM object.

A FAQ is now included at the bottom of this article.

Introduction

Recently, I wrote an Outlook2000 COM addin as a part of a project to build a CRM tool. While coding the project, I thought this would make a good topic for an article especially since most of the Office related stuff I found on the Internet were VB/VBA related and almost none with ATL.

The code in this article is not optimized and the general approach has been kept simple for the reader to follow. Since I took quite sometime to write this, despite my best efforts, in case of any errors or omissions, kindly drop me a mail. If you like this article or found it interesting read, I'd be glad if you could give me a good rating and mail me your comments.:) Thanks.

Overview

Through this article/tutorial, we will learn how to program an Outlook2000/2K+ COM addin using a pure ATL COM object. We'll startout by writing a basic functional COM addin. Then I'll show you how to add standard UI elements like toolbars and menu items to Outlook and how to respond to their events. Next we'll add our own propertysheet for the addin to Outlook's Tools->Options. Along the way we'll see the relevant registry keys and also take a look at useful features of the ATL Wizards and learn to use them effectively

Although we'll be writing an Outlook2000 COM addin, COM addins for other Office2000 applications like Word,Access etc can be built very similarly. Except a couple of minor things like registry keys, for instance, the fundamentals remain the same.

I'm assuming that you are a VC++ COM programmer, and have had some experience with ATL based component development and OLE/Automation, although this is not strictly necessary. To build and test the addin, you must have MS Office 2000 installed on your system, or at least Outlook2K.The project code has been built with VC++ 6.0 sp3+/ATL3.0 and tested on Win2K with Office 2000 installed.

Getting started

An Office addin is a COM Automation component that dynamically extends/enhances and controls any Office suite of applications. Microsoft Office 2000 and later support a new, uniform design architecture for building such application add-ins. Typically such addins are housed in ActiveX dlls(inproc server) and can be dynamically loaded and unloaded by the user through the main application.

An Office COM addin must implement the IDTExtensibility2 interface. The IDTExtensibility2 dispinterface is defined in the MSADDin Designer typelibrary (MSADDNDR.dll/MSADDNDR.tlb) file usually present at the location <drive>/Program Files/Common Files/Designer.

The interface definition looks like:

enum {
    ext_cm_AfterStartup = 0,
    ext_cm_Startup = 1,
    ext_cm_External = 2,
    ext_cm_CommandLine = 3
} ext_ConnectMode;

enum {
    ext_dm_HostShutdown = 0,
    ext_dm_UserClosed = 1
} ext_DisconnectMode;

 ...
 ...
 ...

interface _IDTExtensibility2 : IDispatch {
    [id(0x00000001)]
    HRESULT OnConnection(
                    [in] IDispatch* Application,
                    [in] ext_ConnectMode ConnectMode,
                    [in] IDispatch* AddInInst,
                    [in] SAFEARRAY(VARIANT)* custom);
    [id(0x00000002)]
    HRESULT OnDisconnection(
                    [in] ext_DisconnectMode RemoveMode,
                    [in] SAFEARRAY(VARIANT)* custom);
    [id(0x00000003)]
    HRESULT OnAddInsUpdate([in] SAFEARRAY(VARIANT)* custom);
    [id(0x00000004)]
    HRESULT OnStartupComplete([in] SAFEARRAY(VARIANT)* custom);
    [id(0x00000005)]
    HRESULT OnBeginShutdown([in] SAFEARRAY(VARIANT)* custom);
};

All COM add-ins inherit from IDTExtensibility2 interface and must implement each of its five methods.

OnConnection and OnDisconnection, as their names suggest, are called when the addin loads and unloads from memory. The addin can be loaded either during application startup, by the user or through automation and the enumerator ext_Connect denotes these connection modes.OnAddinsUpdate is called when a set of COM addins changes.OnStartupComplete is called only if the addin was loaded during application startup and OnBeginShutdown is called if the addin was disconnected on host application shutdown.

Registering an addin

To register the COM addin with the host application, we also need to create a couple of registry subkeys under the hive

HKEY_CURRENT_USER\Software\Microsoft\Office\<TheOfficeApp>\Addins\<ProgID>

where ProgID refers to the addin COM object's unique Programmatic Identifier(ProgID). The other entries through which the addin can provide information about itself and specify loading options to the host app are:

FriendlyName - a string value - this is the addin's name as displayed by the host app.
Description - a string value - a description of the addin.
LoadBehavior - a DWORD value. - A combination of values that determine how the addin will be loaded by the host app.Set to 0x03 to load on app startup or 0x08 for user controlled activation.
CommandLineSafe - a DWORD value. Set to 0x01(TRUE) or 0x00(FALSE).

For a full description of the all values and options, please consult MSDN documentation.

Building a minimal COM addin

OK, now we know enough to go ahead and code a minimal Outlook2K COM addin.To build the addin project files fireup VC++ IDE, create a new ATL COM Appwizard project and name it OutlookAddin. Remember,if you name it anything else it probably wouldn't work.(just kidding!)

In the follwing Appwizard Step 1 of 1 dialog, accept the default Server Type Dynamic Link Library(DLL),check Allow merging of proxy-stub code to enable this option and click Finish. Then click OK to generate the project files.

Next goto Insert->New ATL Object menu and insert a new ATL simple object to the project by choosing Objects from Category and Simple Object from Objects list in the ATL Object Wizard dialog. Click Next and type Addin as ShortName.In the Attributes tab check Support ISupportErrorInfo. Accept the default options for the rest and click OK.

So far the Wizard has given us an Automation-compatible,dispinterface-savvy inproc COM object housed in a dll. By default,a registry script(.rgs) to add the COM object specific registry entries have also been handed to us. Build the project and checkout if everything is in order.

If you are the eager-beaver type like me, you still need to compile your project's .idl file at the very least before moving on . So do that now.

Next we will write our addin specific code to implement IDTExtensibility2.This is where we let the Implement Interface ATL Wizard kick and make our life a lot easier. In ClassView right-click on CAddin class and choose Implement Interface. This brings up the ATL Implement Interface Wizard.Next click on Add Typelib and in the Browse Typelibraries dialog, scroll down and check Microsoft Add-in Designer(1.0) and click OK. Next check _IDTExtensibility2 interface from the list under AddinDesignerObjects tab of Implement Interface dialog and click OK.

The wizard implements the selected interface for us by adding a default implementation for each of the 5 methods of _IDTExtensibility2 to the CAddin class and updating the COM_INTERFACE_MAP().  Of course each of the methods just returns E_NOTIMPL and it is upto us to add code to do something useful. But for now, our functional COM addin is ready, except the for the necessary registry entries which we'll add next.

To register our addin with the host application,in this case Outlook2000, open the project's Addin.rgs registry script file (under FileView->Resource Files) and add the following to the end of the file.

HKCU
{
      Software
    {
        Microsoft
        {
            Office
            {
                Outlook
                {
                    Addins
                    {
                        'OutlookAddin.Addin'
                        {
                            val FriendlyName = s 'ADOutlook2K Addin'
                            val Description = s 'ATLCOM Outlook Addin'
                            val LoadBehavior = d '00000008'
                            val CommandLineSafe = d '00000000' 
                        }
                    }
                }
            }
        }
    }
}

Since we want our addin to load at a startup, LoadBehavior is set to 3.Now build the project. If everything is in order, the project gets built successfully and registers the addin. To test the addin, either run the project and specify the fullpath to Outlook2K(\Program Files\Microsoft Office\Office\Outlook.exe) in Executable for Debug Session, or run Outlook2K outside the VC++ IDE after you have registered the dll. To check if our addin has been registered successfully, in Outlook, goto Tools->Options and under Other tab click Advanced Options->COM Addins. An entry for our COM addin should have been added to the Addins Available list; the string is what we specified as 'FriendlyName' in our registry script.



Image 1

While an addin can be programmed for different uses, there are certain common tasks. Typically, this includes adding UI elements like toolbars/toolbands and menu items to Outlook, through which the user can control the addin. By clicking on these buttons and menu items, the user can access the addin's functionality. So next up we'll tackle such toolbar and menu item additions.

Command and Conquer

In Office applications, menus and toolbars are combined into a fully programmable collection called CommandBars. CommandBars are common sharable programmable objects that are exposed by all Office applications as a part of it's object model . CommandBars represent a unified mechanism through which individual toolbars and menu items can be added to the corresponding application. Each CommandBars collection comprises of individual CommandBar objects. .Each CommandBar object again contains a collection of CommandBarControl objects, called CommandBarControls.

CommandBarControls represent a complex hierarchy of objects and subobjects that comprise it's object model. A CommandBarControl can itself contain a CommandBar object, accessible through the CommandBar property of the control. Finally, each CommandBarControl object, within the CommandBarControls collection of controls, can be either a CommandBarComboBox(toolbar combobox), a CommandBarButton(toolbar button), or a CommandBarPopup(popup menu). I wish I could draw a nice diagrammatic representation of the object hierarchy, but I'm terrible at such things(honest!), and I'm sure there are such diagrams depicting MS Office CommandBars object model at MSDN.

In our addin, we'd like to add the following UI elements to Outlook

  • 2 toolbar buttons (with bitmaps) in a new toolband.
  • a new popup menu item (with bitmap) to 'Tools' menu.

First we need to import Office and Outlook typelibraries to our project. To do this open the project's stdafx.h file and add the following #import directive.

#import "C:\Program Files\Microsoft Office\Office\mso9.dll" \
        rename_namespace("Office") named_guids 
using namespace Office;

#import "C:\Program Files\Microsoft Office\Office\MSOUTL9.olb" 
        rename_namespace("Outlook"), raw_interfaces_only, named_guids 
using namespace Outlook;


Note: You need to change the paths above to match the location where MSOffice has been installed on your system.

Now that we are all set, let's dig into some code. First the toolband and toolbar buttons.

In the Outlook Object Model, the Application object is at the top of the object hierarchy that represents the entire application. Through it's ActiveExplorer method we get the Explorer object that represents the currently active window. Next we'll use the GetCommandBars method to get the CommandBars object that, as you know, is a collection of all of Outlook's toolbands and menuitems. Then, we simply call Add method of the CommandBars collection with relevant parameters to add a new toolband. Adding new buttons to the toolband is as simple as getting the toolband's CommandBarControls collection and then calling it's Add method. Finally we query the buttons for the CommandBarButton object that we'll use to set button styles, and other button properties like caption, tooltip text etc.

The code snippet is as follows:

STDMETHODIMP CAddin::OnConnection(IDispatch * Application, 
                                  ext_ConnectMode ConnectMode,
                                  IDispatch * AddInInst, SAFEARRAY * * custom)
{
    
    CComPtr < Office::_CommandBars> spCmdBars; 
    CComPtr < Office::CommandBar> spCmdBar;

    // QI() for _Application
    CComQIPtr <Outlook::_Application> spApp(Application); 
    ATLASSERT(spApp);
    // get the CommandBars interface that represents Outlook's
     //toolbars & menu items    

    CComPtr<Outlook::_Explorer> spExplorer; 
    spApp->ActiveExplorer(&spExplorer);

    HRESULT hr =  spExplorer->get_CommandBars(&spCmdBars);
    if(FAILED(hr))
        return hr;
    ATLASSERT(spCmdBars);

    // now we add a new toolband to Outlook
    // to which we'll add 2 buttons
    CComVariant vName("OutlookAddin");
    CComPtr <Office::CommandBar> spNewCmdBar;
    
    // position it below all toolbands
    //MsoBarPosition::msoBarTop = 1
    CComVariant vPos(1); 

    CComVariant vTemp(VARIANT_TRUE); // menu is temporary        
    CComVariant vEmpty(DISP_E_PARAMNOTFOUND, VT_ERROR);            
    //Add a new toolband through Add method
    // vMenuTemp holds an unspecified parameter
    //spNewCmdBar points to the newly created toolband
    spNewCmdBar = spCmdBars->Add(vName, vPos, vEmpty, vTemp);

    //now get the toolband's CommandBarControls
    CComPtr < Office::CommandBarControls> spBarControls;
    spBarControls = spNewCmdBar->GetControls();
    ATLASSERT(spBarControls);
    
    //MsoControlType::msoControlButton = 1
    CComVariant vToolBarType(1);
    //show the toolbar?
    CComVariant vShow(VARIANT_TRUE);
    
    CComPtr < Office::CommandBarControl> spNewBar; 
    CComPtr < Office::CommandBarControl> spNewBar2; 
            
    // add first button
    spNewBar = spBarControls->Add(vToolBarType,vEmpty,vEmpty,vEmpty,vShow); 
    ATLASSERT(spNewBar);
    // add 2nd button
    spNewBar2 = spBarControls->Add(vToolBarType,vEmpty,vEmpty,vEmpty,vShow);
    ATLASSERT(spNewBar2);
            
    _bstr_t bstrNewCaption(OLESTR("Item1"));
    _bstr_t bstrTipText(OLESTR("Tooltip for Item1"));

    // get CommandBarButton interface for each toolbar button
    // so we can specify button styles and stuff
    // each button displays a bitmap and caption next to it
    CComQIPtr < Office::_CommandBarButton> spCmdButton(spNewBar);
    CComQIPtr < Office::_CommandBarButton> spCmdButton2(spNewBar2);
            
    ATLASSERT(spCmdButton);
    ATLASSERT(spCmdButton2);
            
    // to set a bitmap to a button, load a 32x32 bitmap
    // and copy it to clipboard. Call CommandBarButton's PasteFace()
    // to copy the bitmap to the button face. to use
    // Outlook's set of predefined bitmap, set button's FaceId to     //the
    // button whose bitmap you want to use
    HBITMAP hBmp =(HBITMAP)::LoadImage(_Module.GetResourceInstance(),
    MAKEINTRESOURCE(IDB_BITMAP1),IMAGE_BITMAP,0,0,LR_LOADMAP3DCOLORS);

    // put bitmap into Clipboard
    ::OpenClipboard(NULL);
    ::EmptyClipboard();
    ::SetClipboardData(CF_BITMAP, (HANDLE)hBmp);
    ::CloseClipboard();
    ::DeleteObject(hBmp);        
    // set style before setting bitmap
    spCmdButton->PutStyle(Office::msoButtonIconAndCaption);
            
    HRESULT hr = spCmdButton->PasteFace();
    if (FAILED(hr))
        return hr;

    spCmdButton->PutVisible(VARIANT_TRUE); 
    spCmdButton->PutCaption(OLESTR("Item1")); 
    spCmdButton->PutEnabled(VARIANT_TRUE);
    spCmdButton->PutTooltipText(OLESTR("Tooltip for Item1")); 
    spCmdButton->PutTag(OLESTR("Tag for Item1")); 
    
    //show the toolband
    spNewCmdBar->PutVisible(VARIANT_TRUE); 
            
    spCmdButton2->PutStyle(Office::msoButtonIconAndCaption);
    
    //specify predefined bitmap
    spCmdButton2->PutFaceId(1758);  
    
    spCmdButton2->PutVisible(VARIANT_TRUE); 
    spCmdButton2->PutCaption(OLESTR("Item2")); 
    spCmdButton2->PutEnabled(VARIANT_TRUE);
    spCmdButton2->PutTooltipText(OLESTR("Tooltip for Item2")); 
    spCmdButton2->PutTag(OLESTR("Tag for Item2"));
    spCmdButton2->PutVisible(VARIANT_TRUE);

    //..........
    //..........
    //code to add new menubar to be added here
    //read on
    //..........

Similarly to add a new menu item to Outlook's Tools menu, we do the following. The ActiveMenuBar property of the CommandBars collection returns a CommandBar object that represents the active menubar in the container application(i.e. Outlook for us).Next we query for the active menubar's controls collection (CommandBarControls) through GetControls method. Since we want to add a popup menuitem to Outlook's Tools(6th position) menu,we retrieve the 6th item in the activemenubars control collection and straightaway call Add method to create a new menuitem and attach it to Tools menu. There's really nothing new here.

The corresponding code snippet is as follows:

    //......
    //code to add toolbar here
    //......

    _bstr_t bstrNewMenuText(OLESTR("New Menu Item"));
    CComPtr < Office::CommandBarControls> spCmdCtrls;
    CComPtr < Office::CommandBarControls> spCmdBarCtrls; 
    CComPtr < Office::CommandBarPopup> spCmdPopup;
    CComPtr < Office::CommandBarControl> spCmdCtrl;

    // get CommandBar that is Outlook's main menu
    hr = spCmdBars->get_ActiveMenuBar(&spCmdBar); 
    if (FAILED(hr))
        return hr;
    // get menu as CommandBarControls 
    spCmdCtrls = spCmdBar->GetControls(); 
    ATLASSERT(spCmdCtrls);

    // we want to add a menu entry to Outlook's 6th(Tools) menu     //item
    CComVariant vItem(5);
    spCmdCtrl= spCmdCtrls->GetItem(vItem);
    ATLASSERT(spCmdCtrl);
        
    IDispatchPtr spDisp;
    spDisp = spCmdCtrl->GetControl(); 
        
    // a CommandBarPopup interface is the actual menu item
    CComQIPtr < Office::CommandBarPopup> ppCmdPopup(spDisp);  
    ATLASSERT(ppCmdPopup);
            
    spCmdBarCtrls = ppCmdPopup->GetControls();
    ATLASSERT(spCmdBarCtrls);
        
    CComVariant vMenuType(1); // type of control - menu
    CComVariant vMenuPos(6);  
    CComVariant vMenuEmpty(DISP_E_PARAMNOTFOUND, VT_ERROR);
    CComVariant vMenuShow(VARIANT_TRUE); // menu should be visible
    CComVariant vMenuTemp(VARIANT_TRUE); // menu is temporary        
    
        
    CComPtr < Office::CommandBarControl> spNewMenu;
    // now create the actual menu item and add it
    spNewMenu = spCmdBarCtrls->Add(vMenuType, vMenuEmpty, vMenuEmpty, 
                                       vMenuEmpty, vMenuTemp); 
    ATLASSERT(spNewMenu);
            
    spNewMenu->PutCaption(bstrNewMenuText);
    spNewMenu->PutEnabled(VARIANT_TRUE);
    spNewMenu->PutVisible(VARIANT_TRUE); 
    
    //we'd like our new menu item to look cool and display
    // an icon. Get menu item  as a CommandBarButton
    CComQIPtr < Office::_CommandBarButton> spCmdMenuButton(spNewMenu);
    ATLASSERT(spCmdMenuButton);
    spCmdMenuButton->PutStyle(Office::msoButtonIconAndCaption);
    
    // we want to use the same toolbar bitmap for menuitem too.
    // we grab the CommandBarButton interface so we can add
    // a bitmap to it through PasteFace().
    spCmdMenuButton->PasteFace(); 
    // show the menu        
    spNewMenu->PutVisible(VARIANT_TRUE); 

    return S_OK;
}

With that under our belt, it's F5 time. If everything has gone OK, the project builds successfully and you are about to get a first glimpse of your addin in action(if you haven't already, that is). Since we are going to run Outlook to test our addin, in the 'Executable for Debug' dialog, browse to the current path of Outlook executable (Outlook.exe) and we're finally ready to go. In Outlook goto Tools->Options and under the Other tab, click Advanced Options. From the Advanced Options dialog, click on COM Addins button. Next check the entry for our addin in the Addins Available listbox and click OK. As our addin is loaded a new docked toolband with 2 buttons gets created.Also checkout the cool looking menu item that you just added to Outlook's Tools menu.

There it is!! Not only have you programmed a working Outlook addin, and one that extends Outlook with cool looking toolbars and menu item, thanks to ATL, your < 50Kb addin also qualifies as the leanest, meanest COM server in town. So savour the moment! :)

Image 2

Image 3

Lord of the (disp) Sinks

Putting together a couple of toolbars and menu items, by themselves, are not very useful unless we can write command handlers that respond to their events. So let's get right to it. Of course here, on click of the different buttons and menu items, we'll be just popping up simple messageboxes. But this is where you'd code your addins functionality. From CRM tools, automated contact management, mail notification and filtering to advanced document management systems to full fledged applications, COM addins can perform an endless variety of tasks.

The CommandBarButton control exposes a Click event that is triggered when a user clicks a command bar button. We are going to use this event to run code when the user clicks the toolbar buttons or the menu item. For this, our COM object has to implement an event sink interface. For the  CommandBarButton control, this event dispinterface is _CommandBarButtonEvents.The Click method is declared as

//...
//....Office objects typelibrary
//....

[id(0x00000001), helpcontext(0x00038271)]
  void Click(
    [in] CommandBarButton* Ctrl, 
    [in, out] VARIANT_BOOL* CancelDefault);

//....
//...

Thus all we have to do is implement sink interface/s that will be called by the event source through regular connection point protocol whenever a menu or a toolbar button is clicked. What we get for parameters to our callback method is a pointer to the the source CommandBarButton object and a boolean value that can be used to accept or negate the default action. As to implementing a dispatch sink interface, that's nothing new and as an ATL programmer you have probably done this a lot of times.

But for the uninitiated, ATL provides 2 template classes IDispEventImpl<> and IDispEventSimpleImpl<> for ATL COM objects, that provide an implementation of IDispatch. I prefer the light-weight IDispEventSimpleImpl cause it doesn't need the extra typelib info. Just derive your class from IDispEventSimpleImpl<>, set up your sink map, rig up your callback params through _ATL_SINK_INFO structure and finally call DispEventAdvise and DispEventUnadvise to connect and disconnect from the source interface. For our toolbar buttons and menu items, if we were to write a single callback method for all events, then,once we have a pointer to the CommandBarButton that triggered the event, we can use it's GetCaption method to get the button text, based on which we can perform some selective action. For this sample however, we'll have one callback per event.

Here's how the code goes:
  • Derive your class from IDispSimpleEventImpl- The first parameter is typically the child window ID incase of activeX controls. For us however, this can be any predefined integer that uniquely identifies the event source (in our case the first toolbar button) <>

    class ATL_NO_VTABLE CAddin :
    public CComObjectRootEx < CComSingleThreadModel>,  
    .....
    .....
    public IDispEventSimpleImpl<1,CAddin,<BR>                       &__uuidof(Office::_CommandBarButtonEvents>
    </CODE>
  • Setup the callback- First we define a callback as follows:
    void __stdcall OnClickButton(IDispatch * <BR>                             /*Office::_CommandBarButton**/ Ctrl,
                                 VARIANT_BOOL * CancelDefault);
    Next we use the _ATL_SINK_INFO structure to describe the callback parameters. Open the Addin.h file and at the top add the following declaration:
    extern _ATL_FUNC_INFO OnClickButtonInfo;
    Next open the Addin.cpp file and add the definition:
    _ATL_FUNC_INFO OnClickButtonInfo =
       {CC_STDCALL,VT_EMPTY,2,{VT_DISPATCH,VT_BYREF | VT_BOOL}};
    OnClickButton is very elementary here and looks like:
    void __stdcall CAddin::OnClickButton(IDispatch* <BR>                                    /*Office::_CommandBarButton* */ Ctrl,
                                         VARIANT_BOOL * CancelDefault)
    {
        USES_CONVERSION;
        CComQIPtr<Office::_CommandBarButton> pCommandBarButton(Ctrl);
        //the button that raised the event. Do something with this...
        MessageBox(NULL, "Clicked Button1", "OnClickButton", MB_OK);
        
    }
  • The sinkmap We'll setup the sinkmap using the ATL macros BEGIN_SINK_MAP() and END_SINK_MAP(),the sink map to be populated by SINK_ENTRY_XXX. The sink map basically provides the mapping between a dispid that defines the event and the member function that handles it.

    BEGIN_SINK_MAP(CAddin)
    SINK_ENTRY_INFO(1, __uuidof(Office::_CommandBarButtonEvents),<BR>                /*dispid*/ 0x01, 
                    OnClickButton, &OnClickButtonInfo)
    END_SINK_MAP()

Now that everything is in place, we have to connect to and disconnect from the event source with DispEventAdvise() and DispEventUnadvise(). Our CAddin class's OnConnection() and OnDisconnection() methods are just the place to do this. The parameters to DispEventAdvise() and DispEventUnadvise() are the any interface on the event source and the desired event source interface respectively.

//connect to event source in OnConnection
// m_spButton member variable is a smart pointer to _CommandBarButton
// that is used to cache the pointer to the first toolbar button.

DispEventAdvise((IDispatch*)m_spButton,&DIID__CommandBarButtonEvents);

//when I'm done disconnect from the event source
//some where in OnDisconnection()

DispEventUnadvise((IDispatch*)m_spButton);

Similarly implement disp sinks for all your command buttons and menu items, write handlers and connect and disconnect from them as described above. That's all there is to it. If everything went without a hitch, after you rebuild and run the addin, whenever the buttons or menu item is clicked, your respective callback method should be executed.

Adding a propertypage

The last thing we'll learn to do in this tutorial is how to add our own 'Options' property page to Outlook's Tools->Options property sheet.



Image 4

The catch here is that to add a page to Outlook's Tools->Options menu as a part of our addin, our addin as to implement a propertypage as an activeX control. When the user goes to Tools->Options menu item, the Application object fires an OptionsPagesAdd event, as exposed through the _ApplicationEvents dispinterface in the Outlook object model. Extracts from the IDL definition (as described in MSOUTL9.olb viewed through OLE/COM object Viewer) looks like

dispinterface ApplicationEvents
{
....

[id(0x0000f005), helpcontext(0x0050df87)]
            void OptionsPagesAdd([in] PropertyPages* Pages);
....
}

[
      odl,
      uuid(00063080-0000-0000-C000-000000000046),
      helpcontext(0x0053ec78),
      dual,
      oleautomation
]
....
....

interface PropertyPages : IDispatch {
        [id(0x0000f000), propget, helpcontext(0x004deb87)]
        HRESULT Application([out, retval] _Application** Application);
    ....
    ....
        
    [id(0x0000005f), helpcontext(0x00526624)]
        HRESULT Add([in] VARIANT Page, 
                        [in, optional] BSTR Title);
    
    [id(0x00000054), helpcontext(0x00526625)]
        HRESULT Remove([in] VARIANT Index);
    };

The OptionsPagesAdd event passes us a pointer to the PropertyPages dispinterface, whose Add method will finally add the page. The parameters to the Add method are the the ProgID of our control and the new tab caption text. Similarly, to remove a page, call Remove() with the index of the targeted page. Now let's get down to the nitty gritty of it.

Begin by adding a new ATL activex composite control to the project through Insert->New ATL Object. Select Controls from category and Lite Composite Control from Objects listbox and click Next. Enter the ShortName as PropPage and in the Attributes tab, check the Support ISupportErrorInfo option. click on OK to accept all the default options.

Now we are going to implement the PropertyPage interface. So in ClassView, rightclick on CPropPage class, choose Implement Interface and click Add Typelib button as before.This time check the Microsoft Outlook 9.0 Object Library and click OK. From the Interfaces listbox check PropertyPage and click OK.

The Wizard adds default implementations for the 3 methods of PropertyPage, Apply(), get_Dirty() and GetPageInfo().
Now make the following modifications. In the com map, modify the line
COM_INTERFACE_ENTRY(IDispatch)
to
COM_INTERFACE_ENTRY2(IDispatch,IPropPage)
to resolve any ambiguity. Next to implement IDispatch, we'll use the IDispatchImpl<> template class. So in the CPropPage class declaration replace
class ATL_NO_VTABLE CPropPage : 
    public CComObjectRootEx<CComSingleThreadModel>,
    public IDispatchImpl<IPropPage, &IID_IPropPage, &LIBID_TRAILADDINLib>,
....
....
    public PropertyPage
with
public IDispatchImpl < Outlook::PropertyPage,&__uuidof(Outlook::PropertyPage),
       &LIBID_OUTLOOKADDINLib>
Also remove the redundant #import statement at the top of the PropPage.h file. The typelib has already been imported once in stdafx.h, so this is not needed.

Next we are going to connect and disconnect our addin to ApplicationEvents dispinterface and write the callback method. You already know what to do. Again use the IDispEventSimpleImpl<> template to setup the disp sink for ApplicationEvents, update the sink map and write the callback method for OptionsAddPages event as described above. Since we are using IDispEventSimpleImpl<> multiple times, use a typdef for each event interface implementation. Thus the additions are:

extern _ATL_FUNC_INFO OnOptionsAddPagesInfo;

class ATL_NO_VTABLE CAddin : 
....
....
public IDispEventSimpleImpl<4,CAddin,&__uuidof(Outlook::ApplicationEvents)>
{
public:
//typedef for applicationEvents sink implementation
typedef IDispEventSimpleImpl</*nID =*/ 4,CAddin, 
                            &__uuidof(<A href="outlook::ApplicationEvents">Outlook::ApplicationEvents</A>)> AppEvents;
....
....
....
BEGIN_SINK_MAP(CAddin)
....
SINK_ENTRY_INFO(4,__uuidof(Outlook::ApplicationEvents),
                  /*dispid*/0xf005,OnOptionsAddPages,&OnOptionsAddPagesInfo)
END_SINK_MAP()

public:
//callback method for OptionsAddPages event
void __stdcall OnOptionsAddPages(IDispatch *Ctrl);
};

//in PropPage.cpp file

_ATL_FUNC_INFO OnOptionsAddPagesInfo = (CC_STDCALL,VT_EMPTY,1,{VT_DISPATCH}};

void __stdcall CAddin::OnOptionsAddPages(IDispatch* Ctrl)
{
    CComQIPtr<Outlook::PropertyPages> spPages(Ctrl);
    ATLASSERT(spPages);

    //ProgId of the propertypage control
    CComVariant varProgId(OLESTR("OutlookAddin.PropPage"));

    //tab text
    CComBSTR bstrTitle(OLESTR("OutlookAddin"));
    
    HRESULT hr = spPages->Add((_variant_t)varProgId,(_bstr_t)bstrTitle);
    if(FAILED(hr))
        ATLTRACE("\nFailed adding propertypage");
}
Finally in OnConnection() and OnDisconnection(), call DispEventAdvise and DispEventUnadvise to connect and disconnect to ApplicationEvents, as before. Now that we have everything in place, rebuild the project. Next hit F5 and goto Outlook's Tools->Options menu. You should see the new tab that we just added. But hangon, when you click on the new tab, instead of the propertypage, a MessageBox tells us that the propertypage cannot be displayed. What happened? Has all our hard work gone to waste? Fear not!

What is happening is that although the propertypage gets created, Outlook doesn't get any information about the propertypage control's keyboard behavior. The default ATL implementation of IOleControl's GetControlInfo method returns E_NOTIMPL and consequently the container site cannot process any keystrokes for the propertypage or the contained controls.Hence our page is not displayed. To fix this simply override GetControlInfo() to return S_OK.

In the PropPage.h file, add the declaration:

STDMETHOD(GetControlInfo)(LPCONTROLINFO lpCI);

Our overridden method just returns S_OK, so in the PropPage.cpp file, implement GetControlInfo() as

STDMETHODIMP CPropPage::GetControlInfo(LPCONTROLINFO lpCI)
{
    return S_OK;
}

That's it. Now when you build the project and activate the OutlookAddin tab of Options propertysheet,our new propertypage should get displayed without any errors.

With that we come to the journey's end. The list of things you can do in an Outlook2000 or Office2000 addins are endless. Since, in an addin, you have access to the parent applications internal object model, you can do all the things the app does and more. Plus you can also use other interfaces like MS Assistant that are not directly related to any app. The only limit is your imagination!

Happy addin programming. ;-)

Update

April 02,2003

The response this article has generated on CP has led to this little Q & A section. When I posted this, I was not ready for the barrage of questions and comments that have come up. But I feel, this is a good thing. So keep those questions coming!

Some of the topics and code discussed here are applicable for all Office addins.

  • Handling New Inspector Event
  • Customize Outlook Menus

Handling New Inspector Event

Q : How do I add custom button/menuitems to Outlook's windows like New->Mail Message window and others?

You can get access to all of Outlook's open windows through Inspector and the Inspectors collection. In particular, InspectorEvent and InspectorsEvents dispinterfaces have a host of events that you should handle. Prominent being InspectorsEvents::NewInspector event, which is fired every time a new Inspector window opens up. It is declared as:

....
dispinterface InspectorsEvents {
       properties:
       methods:
           [id(0x0000f001), helpcontext(0x0050e6f0)]
           void NewInspector([in] _Inspector* Inspector);
   };

One way to handle the NewInspector event in the addin class is through the ATL IDispatchImpl<> class template and then handle the NewInspector event in the class's overridden Invoke() implementation. We are using IDispatchImpl<> instead of other ATL classes,only for variation. Here is the code you need to add to your project:

class ATL_NO_VTABLE CAddin : 
    public CComObjectRootEx < CComSingleThreadModel>,
    public CComCoClass < CAddin, &CLSID_Addin>,
        ...
        ...
        public IDispatchImpl < <A href="Outlook::InspectorEvents">Outlook::InspectorEvents</A>, 
               &DIID_InspectorsEvents, &LIBID_OLADDINLib>
{
...
...

private:
CComQIPtr <IConnectionPointContainer,&IID_IConnectionPointContainer> <BR>           m_spInspectorsCPC;
DWORD m_dwCookie;

};

Next declare your overridden Invoke() as :

STDMETHOD(Invoke)(DISPID, REFIID, LCID, WORD, DISPPARAMS*, 
        VARIANT*, EXCEPINFO*, UINT*);

and implement it as :

HRESULT CAddin::Invoke(DISPID dispidMember,REFIID riid,LCID lcid, WORD wFlags,
                        DISPPARAMS* pDispParams, VARIANT* pvarResult,
                        EXCEPINFO*  pExcepInfo,  UINT* puArgErr)
{
 
    if(dispidMember = 0xf001)
    {
    if (!pDispParams)
        return E_INVALIDARG;
    
    if (pDispParams->cArgs > 0)
    {
       //the only parameter is an Inspector    *

       IDispatchPtr pDisp(pDispParams->rgvarg[0].pdispVal);  
       CComQIPtr<_Inspector> spInspector(pDisp);
            
       CComPtr<_CommandBars> pCmdBars;
       HRESULT hr = spInspector->get_CommandBars(&pCmdBars); 
       if(FAILED(hr))
        return hr;
    //once you have access to the new windows CommandBars collection,
    //now add your own menubars and toolbar items to it
    ....
    ....
    }
    }   
};

Finally we need to Advise and Unadvise to receive the events. This is done, as before, through the ConnectionPoints. OnConnection() and OnDisconnection() is the perfect place to setup the communication. Code to setup the connection goes like :

CComPtr<Outlook::_Inspectors> spInspectors;
hr = spApp->get_Inspectors(&spInspectors);

m_spInspectorsCPC = spInspectors;
ATLASSERT(m_spInspectorsCPC);

CComPtr<ICONNECTIONPOINT> spCP;
hr = m_spInspectorsCPC->FindConnectionPoint(<BR>                                  __uuidof(Outlook::InspectorsEvents) ,&spCP);
if(FAILED(hr))
    return hr;

hr = spCP->Advise(
    reinterpret_cast <IDISPATCH*>(this),
    &m_dwCookie);
if (FAILED(hr))
    return hr;

and break it up on OnDisconnection():

CComPtr<IConnectionPoint> spCP;
hr = m_spInspectorsCPC->FindConnectionPoint(DIID_InspectorsEvents,&spCP);
if(FAILED(hr))
    return hr;

hr = spCP4->Unadvise(m_dwInspectors);
if(FAILED(hr))
    return hr;

Provided everything has gone alright, you should be successfully handling the NewInspector event. The article already shows how to add your own menu and toolbar items.So that's it.

Customize Outlook Menus

Q : How do I make an addition to Outlook's standard menuitems like File,Edit etc.?

Once you get Outlook CommandBars collection, you have a to first search for "Menu Bar" CommandBar and then iterate over it's CommandBarControl collection (which contains File,Edit and other menuitems) to get the target menuitem. Next get it's CommandBarControls collection and add your menuitem. Remember that a CommandBarPopup represents a menuitem and CommandBarButton a toolbaritem. You can also use FindControl() if you know Outlook menu ID's.

Here's a tiny little method I call during OnConnection() in my addin, that adds a single menuitem to Outlook's File menu :

HRESULT CAddin::AddNewMenu(_CommandBars *pCmdBars)
{
    CComPtr < Office::CommandBar> spNewCmdBar;
    
    HRESULT hr = pCmdBars->get_ActiveMenuBar(&spNewCmdBar);
    if (FAILED(hr))
        return hr;
    
    int nCount;
    hr =pCmdBars->get_Count(&nCount); 
    if (FAILED(hr))
        return hr;
    
    CComBSTR bstrBarName;
    CComBSTR bstrToolbarName(OLESTR("Menu Bar"));
    CComPtr < Office::CommandBar> pTempCmdBar;
    
    for (int i = 1; i <= nCount; i++)
    {
        pTempCmdBar = pCmdBars->GetItem(CComVariant(i));
        ATLASSERT(pTempCmdBar);
        
        pTempCmdBar->get_Name(&bstrBarName);
        if (_bstr_t(bstrBarName, TRUE) == _bstr_t(bstrToolbarName, TRUE)) 
        {
            CComPtr< Office::CommandBarControl > spCmdBarCtrl; 
            CComPtr< Office::CommandBarControls > spCmdBarCtrls; 
            
            spCmdBarCtrls = pTempCmdBar->GetControls(); 
            
            int n = spCmdBarCtrls->GetCount(); 
            
            for (int j = 1; j < n; j++)
            {
                spCmdBarCtrl = spCmdBarCtrls->GetItem(CComVariant(j));
                CComBSTR bstrCaption;
                spCmdBarCtrl->get_Caption(&bstrCaption); 
                CComBSTR bstrTarget(OLESTR("&File"));
                
                // we want to add to File menu
                if (_bstr_t(bstrCaption, TRUE) == _bstr_t(bstrTarget, TRUE))
                {
                    // File is a menu item
                    CComQIPtr<Office::CommandBarPopup> <BR>                                          spPopup(spCmdBarCtrl->GetControl());
                    ATLASSERT(spPopup);
                    
                    
                    CComPtr<CommandBarControls> spCmdCtrls;
                    spCmdCtrls = spPopup->GetCommandBar()->GetControls();
                    ATLASSERT(spCmdCtrls);
                    
                    CComVariant vtType(1); // menu item is a button
                    CComVariant vtEmpty(DISP_E_PARAMNOTFOUND, VT_ERROR);
                    CComVariant vtTemp(VARIANT_TRUE);
                    
                    
                    CComPtr< Office::CommandBarControl > spNewBarCtrl; 
                    
                    // the 4th param to add is position before which
                    // menu will be added. if you pass 2,for example,
                    // menuitem will be added before the 2nd menuitem in File
                    // menu, i.e. before Open. 
                    spNewBarCtrl = spCmdCtrls->Add(vtType, vtEmpty, <BR>                                                    vtEmpty, vtEmpty, vtTemp);
                    ATLASSERT(spNewBarCtrl);
                    
                    CComQIPtr< Office::_CommandBarButton > <BR>                                                       spButton(spNewBarCtrl);
                    ATLASSERT(spButton);
                    //once you have the menuitem as a button
                    //set it's icon and caption
                    spButton->PutCaption(OLESTR("New Menu Item"));
                    spButton->put_FaceId(4);
                    spButton->PutStyle(Office::msoButtonIconAndCaption);
                    spButton->PutVisible(VARIANT_TRUE); 
                }
            }
            
            
            break;
        }
        pTempCmdBar.Detach();    
    }
    
    
    return S_OK;
}


Q : How do I add a new menubar say, between Outlook's File and Edit menus?

This is somewhat related to the earlier question about additions to standard Outlook menu items. Again, what we need to do is: from Outlook's CommandBars collection, get the active menubar CommandBar,which represents all of Outlook's menus. Next, make an addition to this CommandBar object, through it's CommandBarControls collection. A menu is a CommandBarPopup object(MsoControlType::msoControlPopup = 10 ), to which we have to add our menuitems i.e. CommandBarButton(MsoControlType::msoControlButton = 1) . Also, in the call to CommandBarControls::Add(), we use the 4th parameter(Before) to specifiy the position as 2(i.e. after File and before Edit)

Like the earlier little function, AddNewMenubar() adds a "Custom" menubar,between File and Edit, and has a single button(menuitem).

HRESULT CAddin::AddNewMenubar(_CommandBars *pCmdBars)
{
    CComPtr < Office::CommandBar > spNewCmdBar;
    
    HRESULT hr = pCmdBars->get_ActiveMenuBar(&spNewCmdBar);
    if (FAILED(hr))
        return hr;
    
    CComPtr< Office::CommandBarControls > spCtrls; 
    spCtrls = spNewCmdBar->GetControls(); 
    ATLASSERT(spCtrls);
    
    CComVariant varType(10);
    CComVariant vtEmpty(DISP_E_PARAMNOTFOUND, VT_ERROR);
    CComVariant vtTemp(VARIANT_TRUE);
    CComVariant vtBefore(2);
    CComPtr< CommandBarControl > spCtrl;
    spCtrl = spCtrls->Add(varType, vtEmpty, vtEmpty, vtBefore, vtTemp);
    
    ATLASSERT(spCtrl);
    
    CComQIPtr< Office::CommandBarPopup > spPopup(spCtrl->GetControl());
    ATLASSERT(spPopup);
    
    // set menu caption
    spPopup->PutCaption(OLESTR("Custom"));
    spPopup->PutVisible(VARIANT_TRUE);
    
    // now add a menu item to the menubar
    // as a CommandBarButton so you can specify styles
    
    CComPtr< Office::CommandBarControls > spCmdBarCtrls; 
    spCmdBarCtrls = spPopup->GetControls(); 
    
    // A menu is a CommandBarPopup 
    // object(MsoControlType::msoControlPopup = 10), 
    // to which we have to add our menuitems i.e. 
    // CommandBarButton(MsoControlType::msoControlButton = 1).
    // you can also add popup menus similarly.
    
    CComVariant vType(1); // button
    CComPtr< Office::CommandBarControl > spBarCtrl; 
    
    spBarCtrl = spCmdBarCtrls->Add(vType, vtEmpty, vtEmpty, vtEmpty, vtTemp); 
    ATLASSERT(spBarCtrl);
    
    
    CComQIPtr< Office::_CommandBarButton > spButton(spBarCtrl);
    ATLASSERT(spButton);
    
    // set button styles
    spButton->PutCaption(OLESTR("Menu1"));
    spButton->PutFaceId(4);
    spButton->PutStyle(Office::msoButtonIconAndCaption);
    spButton->PutVisible(VARIANT_TRUE); 
    
    return S_OK;
}

That's it for now. Cheers! :)

References and Acknowledgements

MSKB Articles:
Q220600 - How to automate Outlook using VC++
Q238228 - Build an Office2000 COM addin in VB
Q259298 - Howto use Outlook Object Model through #import
Q173604 - How to use CommandBars in Outlook solutions
Q182394- How to use CommandBars in Outlook solutions


MSDN articles:
Building COM addins for Outlook2000 - Thomas Rizzo
Developing COM addins for MS Office 2000 - Ed Schultz

MS Newsgroups:
microsoft.public.office.developer.com.addins
microsoft.public.outlook.prog_addins

Books:
ATL Internals - Brent Rector & Chris Sells.
Developer's workshop to COM and ATL 3.0 - Andrew W.Troelsen.

Other:
Renat Garyaev's (garyaev@acm.org) Vernoter sample.
David Mavin, without whom this whole project would not have happened.
People at codeproject.com who have egged me on and provided much needed encouragement.
All the people who developed the fantastic COM object models behind all Office applications. :)

The 80's prog rock/metal band Queensryche's music.

License

This article has no explicit license attached to it but may contain usage terms in the article text or the download files themselves. If in doubt please contact the author via the discussion board below.

A list of licenses authors might use can be found here


Written By
Web Developer
India India
Amit Dey is a freelance programmer from Bangalore,India. Chiefly programming VC++/MFC, ATL/COM and PocketPC and Palm platforms. Apart from programming and CP, he is a self-taught guitar and keyboard player.

He can be contacted at visualcdev@hotmail.com


Comments and Discussions

 
QuestionOffice 2010 sample Pin
Ștefan-Mihai MOGA20-Oct-11 2:50
professionalȘtefan-Mihai MOGA20-Oct-11 2:50 
AnswerRe: Office 2010 sample Pin
Priyank Bolia15-Nov-12 21:11
Priyank Bolia15-Nov-12 21:11 
QuestionIs there anyone out there doing this C++ with just MFC (No ATL) Pin
KAWDUP10-Dec-10 9:30
KAWDUP10-Dec-10 9:30 
GeneralAccessing mail content. Pin
msgurikar29-Sep-10 1:11
msgurikar29-Sep-10 1:11 
Generalfor GetImage() IRibbonExtensibility interface excel addin Pin
anandssunku21-Jul-10 23:44
anandssunku21-Jul-10 23:44 
QuestionHow to create property sheet having some property pages and how to call property sheet on add ins button click event? Pin
jayprakash2413-Jul-10 18:39
jayprakash2413-Jul-10 18:39 
QuestionOk. It works. Now, how do I remove the test buttons? Pin
eight27-Jan-10 16:22
eight27-Jan-10 16:22 
Generalproblem on docked toolbar (popup menu with buttons) Pin
Member 28372582-Aug-09 22:47
Member 28372582-Aug-09 22:47 
GeneralRe: problem on docked toolbar (popup menu with buttons) Pin
nikhil Gupta23-Jul-12 0:37
nikhil Gupta23-Jul-12 0:37 
QuestionHow to handle open Event for AppointmentItem in VC++ & ATL COM application? Pin
Ravindrakumarkaranki24-Jun-09 1:30
Ravindrakumarkaranki24-Jun-09 1:30 
QuestionHow to add Item in OutLook's connect people channel's popmenu? Pin
chenjh.pt25-Feb-09 22:02
chenjh.pt25-Feb-09 22:02 
QuestionHow can I set SMTP/POP3 server address? Pin
janeying23-Feb-09 22:44
janeying23-Feb-09 22:44 
QuestionHow to get the DISPID of an event? Pin
lakshmi.dj@gmail.com7-Jan-09 0:53
lakshmi.dj@gmail.com7-Jan-09 0:53 
QuestionCan't get event sink to work? Pin
Jason Teagle7-Oct-08 7:11
Jason Teagle7-Oct-08 7:11 
QuestionWill COM Add-in work on MAC O/S Pin
Lokesh Dewangan27-Aug-08 19:23
Lokesh Dewangan27-Aug-08 19:23 
GeneralAdding button to New -&gt; Mail Message Pin
A Mehta23-May-08 0:26
A Mehta23-May-08 0:26 
Questioncant outlook's path b pre-determined? Pin
punit_doshi15-May-08 23:22
punit_doshi15-May-08 23:22 
GeneralOnClickButton() - not working Pin
punit_doshi14-May-08 18:04
punit_doshi14-May-08 18:04 
GeneralRe: OnClickButton() - not working Pin
punit_doshi15-May-08 20:17
punit_doshi15-May-08 20:17 
QuestionVista + O2K7? Pin
dukdukduk10-Jan-08 6:58
dukdukduk10-Jan-08 6:58 
QuestionVista Windows Mail Pin
1scouser1-Jan-08 3:47
1scouser1-Jan-08 3:47 
QuestionAny books about that ? Pin
Tarek Jabri3-Oct-07 23:46
Tarek Jabri3-Oct-07 23:46 
QuestionMenu Does not get deleted on closing th application Pin
wishvenkat24-Jul-07 3:14
wishvenkat24-Jul-07 3:14 
GeneralA problem while adding a menu item to Word [modified] Pin
robert752824-Jun-07 16:55
robert752824-Jun-07 16:55 
GeneralToolbar problem plz help Pin
Fastro25-May-07 0:29
Fastro25-May-07 0:29 

General General    News News    Suggestion Suggestion    Question Question    Bug Bug    Answer Answer    Joke Joke    Praise Praise    Rant Rant    Admin Admin   

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.