Click here to Skip to main content
Click here to Skip to main content

GPS Virtual Driver

, 12 Jun 2007
Rate this:
Please Sign up or sign in to vote.
Virtual Serial (COM) Driver that translates GPS input from NMEA 0183 v2.3 to v2.0 so it can be consumed from legacy GPS applications

Introduction

This article shows how to use virtual serial (COM) port to read and convert GPS data stream from one format to another allowing older legacy GPS applications to work with the newer GPS receivers.

Background

I have HPC CASIO Cassiopeia A-10 with Windows CE 2.00 that I'm using exclusively for GPS navigation. I'm using TeleType application for WinCE 2.00 with Delorme Tripmate GPS. Recently I upgraded my GPS with Pharos GPS-500 SiRF III and the TeleType application didn't work with it. It turns out that the application is working with an older version of the NMEA protocol than the GPS-500. The application is using NMEA 0183 v2.0 and the GPS-500 NMEA 0183 v2.3.

The application is actually using only two sentences from the NMEA protocol - GGA and RMC:

GGA —Global Positioning System Fixed Data

$GPGGA,161229.487,3723.2475,N,12158.3416,W,1,07,1.0,9.0,M,,,,0000*18
Name Example Units Description
Message ID $GPGGA GGA protocol header
UTC Time 161229.487 hhmmss.sss
Latitude 3723.2475 ddmm.mmmm
N/S Indicator N N=north or S=south
Longitude 12158.3416 dddmm.mmmm
E/W Indicator W E=east or W=west
Position Fix Indicator 1 See Table 1-4
Satellites Used 7 Range 0 to 12
HDOP 1 Horizontal Dilution of Precision
MSL Altitude 9 meters
Units M meters
Geoid Separation meters
Units M meters
Age of Diff. Corr. second Null fields when DGPS is not used
Diff. Ref. Station ID 0000
Checksum *18
<CR> <LF> End of message termination

Note that there are no differences in GGA between NMEA v2.0 and v2.3.

RMC—Recommended Minimum Specific GNSS Data

$GPRMC,161229.487,A,3723.2475,N,12158.3416,W,0.13,309.62,120598,,A*10
Name Example Units Description
Message ID $GPRMC RMC protocol header
UTC Time 161229.487 hhmmss.sss
Status A A=data valid or V=data not valid
Latitude 3723.2475 ddmm.mmmm
N/S Indicator N N=north or S=south
Longitude 12158.3416 dddmm.mmmm
E/W Indicator W E=east or W=west
Speed Over Ground 0.13 knots
Course Over Ground 309.62 degrees True
Date 120598 ddmmyy
Magnetic Variation degrees E=east or W=west
Mode A A=Autonomous, D=DGPS, E= DR (missing in v2.0)
Checksum *10
<CR> <LF> End of message termination

The last field "Mode" does not exist in NMEA v2.0. In order for my application to work, it needs to translate the RMC from v2.3 (the GPS-500) to v2.0 (the application). In the translation, it needs to remove the last field from the RMC data and make it look like this:

$GPRMC,161229.487,A,3723.2475,N,12158.3416,W,0.13,309.62,120598,*20

Using the Code

To build virtual serial (COM) port, I used the excellent example provided in this article. (Big thanks to the author.)

The virtual port serves as a connection between the actual port and the application. In the process of reading the data from the GPS and passing it to the application, the virtual port translates the GPS data format from NMEA 2.3 to NMEA 2.0 for the RMC sentences.

The following code shows the virtual port "read" function:

DWORD COM_Read( DWORD hOpenContext, LPVOID pBuffer, DWORD Count )
{
    if (hOpenContext != OPEN_CONTEXT)
        return 0;

    // read from the actual port 
    DWORD dwBytes = 0;
    ReadFile(hComm, pBuffer, Count, &dwBytes, NULL);

    // convert the data before it's returned
    Convert( pBuffer, dwBytes );

    return dwBytes;
}

The function "Convert" is doing the work of locating and translating the RMC sentences:

char * atoh = "0123456789ABCDEF";

//             "   0    1    2    3    4    5    6    7    8    9 : ; 
// < = > ? @    A    B    C    D    E    F"
BYTE htoa1[] = {0x00,0x10,0x20,0x30,0x40,0x50,0x60,0x70,0x80,0x90,
		0,0,0,0,0,0,0,0xA0,0xB0,0xC0,0xD0,0xE0,0xF0};
BYTE htoa2[] = {0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08,0x09,
		0,0,0,0,0,0,0,0x0A,0x0B,0x0C,0x0D,0x0E,0x0F};

void Convert( LPVOID pBuffer, DWORD Count )
{
    char* pCh = (char*)pBuffer;
    char ch, crc1, crc2; DWORD nCRC; BYTE state = 10;
    for (DWORD i=0;i<Count; i++)
    {
        ch = pCh[i];

        if (ch == '$') 
            state = 11; 
        else
        {
            switch ( state )
            {
            case 11: state = ch == 'G'? 12:10; break;
            case 12: state = ch == 'P'? 13:10; break;
            case 13: state = ch == 'R'? 14:10; break;
            case 14: state = ch == 'M'? 15:10; break;
            case 15: state = ch == 'C'? 16:10; break;
            case 16: state = ch == ','? 20:10; break;

            case 20:     if (ch == 'A') state = 21; break;
            case 21: state = ch == '*'? 22:20; break;
            case 22: 
                    crc1 = ch; state = 23; break;
            case 23: 
                { 
                    crc2 = ch; 

                    // get the crc
                    nCRC = htoa1[crc1 - '0'] + htoa2[crc2 - '0'];

                    // remove the chars we are deleting
                    nCRC -= 'A';
                    nCRC -= ',';

                    // ... ,,A*72\n
                    //          ^ current pos
                    //      ^ write over pos

                    pCh[i-4]='*';
                    pCh[i-3]=atoh[(nCRC & 0xF0) >> 4];
                    pCh[i-2]=atoh[ nCRC & 0x0F ];
                    pCh[i-1]=13;
                    pCh[i-0]=10;

                    state = 10;
                }
                break;
            }
        }
    }
}

The function goes through the input buffer pBuffer and locates any RMC sentences. For each RMC, it checks for the string "A*" at the end and removes it. It also calculates and updates the CRC check sum at the end.

To install the virtual port driver, we need to copy the driver DLL file to \windows folder at the device and add these entries in the registry:

[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Serial6]
"ManagePort"=dword:00000002
"DeviceType"=dword:00000001
"Index"=dword:00000006
"DevConfig"=hex: 10,00,00,00,05,00,00,00,10,01,00,00,00,4b,
		00,00,00,00,08,00,00,00,00,00,00
"Tsp"="Unimodem.dll"
"Order"=dword:00000006
"Prefix"="COM"
"FriendlyName"="GPS Virtual Driver"
"Dll"="GpsVirtualDriver.dll"

"ManagePort" is the port number where the GPS device is connected to. In my case, the GPS is connected with PCMCIA card and shows up as COM2 in the device.
"Index" is the virtual serial port COM number. In this example, it is COM6.

To deploy the application to the device, we need to build a cab file. This is a simple INF file that is used to build the cab file:

; sample.inf
;
;==================================================

[Version]
Signature    = "$Windows NT$"
Provider    = "Gps"
CESignature    = "$Windows CE$"

;
; Supports only WinCE 2.00
;
[CEDevice]
VersionMin=2.00
VersionMax=2.00

[CEStrings]
AppName = "Virtual Driver"
InstallDir = %CE2%

[Strings]
reg_path = Drivers\Builtin\Serial6

;==================================================

[DefaultInstall]
CopyFiles    = Dllfiles
Addreg        = Regkeys

;==================================================

[SourceDisksNames]
1 =, "Common Files",, .

[SourceDisksFiles]
GpsVirtualDriver.dll    = 1

;==================================================
; Ouput directories for files & shortcuts

[DestinationDirs]
Dllfiles = 0, %CE2%

[Dllfiles]
GpsVirtualDriver.dll

[Regkeys]
HKLM,%reg_path%,Dll,0x00000000,GpsVirtualDriver.dll
HKLM,%reg_path%,Prefix,0x00000000,COM
HKLM,%reg_path%,FriendlyName,0x00000000,GPS Virtual Driver
HKLM,%reg_path%,Index,0x00010001,6
HKLM,%reg_path%,Order,0x00010001,2
HKLM,%reg_path%,ManagePort,0x00010001,2
HKLM,%reg_path%,DeviceType,0x00010001,1
HKLM,%reg_path%,Tsp,0x00000000,Unimodem.dll
HKLM,%reg_path%,DevConfig,0x00000001,10,00,00,00,05,00,00,00,10,
	01,00,00,00,4b,00,00,00,00,08,00,00,00,00,00,00

After the cab file is installed, a soft reset is required for the driver to start working.

Points of Interest

Doing this small project was full of fun and I learned how to build simple device drivers for Windows CE 2.00. Now I have my Cassiopeia running the TeleType GPS application with the new GPS-500 receiver. The GPS-500 is very compact and it works out of my PCMCIA extension slot from where it gets its power and doesn't require batteries and/or bulky cables. It also gives me the opportunity to continue using my old and brave Cassiopeia A-10 for GPS navigation.

References

History

  • 12-Jun-2007 - First release

License

This article, along with any associated source code and files, is licensed under The GNU General Public License (GPLv3)

About the Author

dstefanov

United States United States
No Biography provided

Comments and Discussions

 
GeneralReading from VB.Net Pinmemberjcolby10-Sep-07 7:29 
GeneralRe: Reading from VB.Net PinmemberAlon Ronen12-Jul-09 4:56 
QuestionThis sounds exactly what I need but..... Pinmemberpoliformukgib2-Sep-07 11:04 
I can't work out how to make it boot. I have downloaed the file but can't work out how to make it work!!!!
 
I need an NMEA V2.0 feed but my new mouse only gives V2.2.
 
Please help a computer illiterate.Confused | :confused:
 
Many Thanks
 
Chas Roberts

AnswerRe: This sounds exactly what I need but..... Pinmemberdstefanov2-Sep-07 15:29 

General General    News News    Suggestion Suggestion    Question Question    Bug Bug    Answer Answer    Joke Joke    Rant Rant    Admin Admin   

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.

| Advertise | Privacy | Mobile
Web04 | 2.8.140721.1 | Last Updated 12 Jun 2007
Article Copyright 2007 by dstefanov
Everything else Copyright © CodeProject, 1999-2014
Terms of Service
Layout: fixed | fluid