Click here to Skip to main content
Click here to Skip to main content

Beginner's Tutorial - Using global hotkeys

, 28 Apr 2002 Ms-PL
Rate this:
Please Sign up or sign in to vote.
Explains how to register, use and unregister hotkeys

Introduction

Today morning, someone was asking about using hot keys in the VC++ forum. I had never used hotkeys and it intrigued me not a little. I thought I'd cook up a simple application and write a nice little article for CP. These days I have been writing too many .NET articles and I thought it's time I wrote a normal unmanaged program as Mike Dunn or Colin Davies would call it.

First of all remember that hot keys are going to be global to the Operating System. Thus be careful what you choose as your hot key. Also decide whether your application is important enough to have an Operating System level short cut key. The user might accidentally press Ctrl-D and suddenly find your program popping up. In fact if it's an old enough person the sudden popping up of an unexpected window might even give him or her a heart attack. This is obviously a situation to be avoided.

How to set hot keys

Well, setting hot keys is just an API call away for anyone who might be thinking it's a complicated process. We use the API call RegisterHotKey which is prototyped as follows.

BOOL RegisterHotKey(
    HWND hWnd,         // window to receive hot-key notification
    int id,            // identifier of hot key
    UINT fsModifiers,  // key-modifier flags
    UINT vk            // virtual-key code
);

A normal application can use any value between 0x0000 and 0xBFFF but if you are writing a DLL, then you must use GlobalAddAtom to get a unique identifier for your hot key. There are currently four allowed key modifiers which let you trap the Ctrl key, the Alt key, the Shift key and the WinKey. You may trap them individually or as combinations of each other. For example you can have a combination short cut like Ctrl-Shift-WinKey-Y to pop up yahoo messenger, though why you'd want to set up that kind of convoluted short cut would be a very tough question to answer.

RegisterHotKey(hWndA, 100, MOD_ALT | MOD_SHIFT, 'P');
RegisterHotKey(hWndA, 200, MOD_WIN, 'R');

Okay, setting the hot key was simple. So, what does this do? Good question! What we have achieved is that, whenever this hot key is pressed a WM_HOTKEY message is send to the window specified by the HWND parameter. Neat. Also remember that if you are trying to set a hot key that has already been registered like the WinKey-E hot key that brings up Explorer, this function will fail and return FALSE, else it will return TRUE. So please do not fail to check the return value.

Un-registering hotkeys

Well as you would expect, there is an API call called UnregisterHotKey which un-registers our hot key or hot keys. Remember to un-register all hot keys when your program exits. In fact just to be safe un-register a key which might actually already have been un-registered. No harm done at all. This function is prototyped as :-

BOOL UnregisterHotKey(
    HWND hWnd,  // window associated with hot key
    int id      // identifier of hot key
);

The identifier is the same one which we had passed to RegisterHotKey. If you had used GlobalAddAtom to get a unique identifier, you must save it somewhere so that you can use it to un-register the hot key.

UnregisterHotKey(hWndMain,300);

Handling the hot key

If you are writing a straight API program you shouldn't have too much difficulty in handling the WM_HOTKEY message. Just check wParam which will contain the identifier of the hot key. The problem with MFC is that for some strange reason, the class wizard does not seem to include the WM_HOTKEY message. I was using VC++ 6.0 with SP5 when i originally wrote the program. I am not aware of whether this is the same for VC++ 7.0 or even whether there is some kind of obscure workaround for VC++ 6.0. If anyone knows a work around, kindly let me know too. But there is nothing stopping us from adding the entry to the message map. It's perfectly within the rules to do that, I say.

ON_MESSAGE(WM_HOTKEY,OnHotKey)

Okay, that was easy. Now we add our function. Just add this function to your window class, the same window that is going to receive the WM_HOTKEY message.

LRESULT OnHotKey(WPARAM wParam, LPARAM lParam);

Now all you have to do is to write the function body, check wParam and see if it is the identifier of your hot key and do what you want. Typically you might want to use ShellExecute to start your program, which is what I have done in the sample program for this article.

Sample Program

Well. the sample program was quickly put together and it lets you choose a single modifier key (it does not allow multiple modifiers) and you can choose a virtual key between A and Z. You can also browse to an executable and when you click the Start button, the hot key is alive. It's a very simple program and does not really do much. But you can look through the source code, if my explanations weren't coherent enough for you.

License

This article, along with any associated source code and files, is licensed under The Microsoft Public License (Ms-PL)

Share

About the Author

Nish Sivakumar

United States United States
Nish is a real nice guy who has been writing code since 1990 when he first got his hands on an 8088 with 640 KB RAM. Originally from sunny Trivandrum in India, he has been living in various places over the past few years and often thinks it’s time he settled down somewhere.
 
Nish has been a Microsoft Visual C++ MVP since October, 2002 - awfully nice of Microsoft, he thinks. He maintains an MVP tips and tricks web site - www.voidnish.com where you can find a consolidated list of his articles, writings and ideas on VC++, MFC, .NET and C++/CLI. Oh, and you might want to check out his blog on C++/CLI, MFC, .NET and a lot of other stuff - blog.voidnish.com.
 
Nish loves reading Science Fiction, P G Wodehouse and Agatha Christie, and also fancies himself to be a decent writer of sorts. He has authored a romantic comedy Summer Love and Some more Cricket as well as a programming book – Extending MFC applications with the .NET Framework.
 
Nish's latest book C++/CLI in Action published by Manning Publications is now available for purchase. You can read more about the book on his blog.
 
Despite his wife's attempts to get him into cooking, his best effort so far has been a badly done omelette. Some day, he hopes to be a good cook, and to cook a tasty dinner for his wife.

Comments and Discussions

 
QuestionBut RegisterHotKey overwites hotkeys of other tools PinmemberTheCoderGuy25-Nov-14 21:03 
AnswerRe: But RegisterHotKey overwites hotkeys of other tools PinmemberTheCoderGuy26-Nov-14 19:03 
QuestionGerman umlauts Pinmemberrootdial19-Jul-13 1:03 
GeneralMy vote of 5 PinmemberMember 96348733-Dec-12 19:28 
QuestionDownload link Pinmembersubheesh23-Aug-11 18:27 
AnswerRe: Download link PinmvpNishant Sivakumar24-Aug-11 12:32 
Question.net hotkeys Pinmembertsdaemon29-Jun-11 2:03 
GeneralMy vote of 5 Pinmembersamq17-Nov-10 3:15 
Generalbad word filter to protect my kids. PinmemberZUPERKOOL7-Feb-10 7:48 
GeneralGetting a compilation error PinmemberNitsanBr31-Aug-08 8:36 
GeneralQuery on RegisterHotKey PinmemberMember 407504817-Jul-08 20:44 
GeneralRe: Query on RegisterHotKey Pinmemberzapaaris18-Aug-11 10:51 
The F12 key is reserved for use by the debugger at all times, so it should not be registered as a hot key. Even when you are not debugging an application, F12 is reserved in case a kernel-mode debugger or a just-in-time debugger is resident.
Follow the link
http://msdn.microsoft.com/en-us/library/ms646309.aspx
GeneralHotKey for IE Pinmemberlal001217-Jun-08 23:10 
Questionhow to trap Hotkey without using Massage Map in win32 app? Pinmemberrajksingh4-May-08 21:28 
GeneralThanks - Pinmemberbruccutler31-Jan-08 8:19 
GeneralMinor correction - PinmemberSabuncu14-Aug-07 9:12 
GeneralThanks PinmemberHakunaMatada15-May-07 20:26 
Questionhow to remap keyboard globally Pinmembertedkidane11-May-07 6:57 
Question? Focus PinmemberSynetech22-Jul-06 19:25 
QuestionHow to make this example to work with Visual C++2005? Pinmemberhires7725-Jun-06 5:18 
QuestionHow to Use F1...F12 and other Virtual keys as a Hotkey !! plzzz help PinmemberManni Singh7-Jun-06 10:28 
AnswerRe: How to Use F1...F12 and other Virtual keys as a Hotkey !! plzzz help PinmemberSynetech4-May-08 10:22 
GeneralgOoD PinmemberLivingThoughts11-Feb-06 19:17 
QuestionIs there anyway to handle HOTKEY messages like "Control + Alt + Delete" in one's application? PinmemberSstar7-Feb-06 16:31 
AnswerRe: Is there anyway to handle HOTKEY messages like "Control + Alt + Delete" in one's application? PinmemberLivingThoughts14-Feb-06 21:16 

General General    News News    Suggestion Suggestion    Question Question    Bug Bug    Answer Answer    Joke Joke    Rant Rant    Admin Admin   

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.

| Advertise | Privacy | Terms of Use | Mobile
Web04 | 2.8.141223.1 | Last Updated 29 Apr 2002
Article Copyright 2002 by Nish Sivakumar
Everything else Copyright © CodeProject, 1999-2014
Layout: fixed | fluid