Click here to Skip to main content
Click here to Skip to main content

A reusable, high performance, socket server class - Part 1

, 17 Aug 2002
Rate this:
Please Sign up or sign in to vote.
Writing a high performance server that runs on Windows NT and uses sockets to communicate with the outside world isn't that hard once you dig through the API references. What's more most of the code is common between all of the servers that you're likely to want to write.

The following source was built using Visual Studio 6.0 SP5 and Visual Studio .NET. You need to have a version of the Microsoft Platform SDK installed

Note that the debug builds of the code waste a lot of CPU cycles due to the the debug trace output. It's only worth profiling the release builds.

Overview

Writing a high performance server that runs on Windows NT and uses sockets to communicate with the outside world isn't that hard once you dig through the API references. What's more most of the code is common between all of the servers that you're likely to want to write. It should be possible to wrap all of the common code up in some easy to reuse classes. However, when I went looking for some classes to use to write my first socket server all of the examples and articles that I found required the user to pretty much start from scratch or utilise "cut and paste reuse" when they wanted to use the code in their own servers. Also the more complicated examples, ones that used IO completion ports for example, tended to stop short of demonstrating real world usage. After all, anyone can write an echo server... The aim of this article is to explain the set of reusable classes that I designed for writing socket servers and show how they can be used with servers which do more than simply echo every byte they receive. Note that I'm not going to bother explaining the hows and why's of IO completion ports etc, there are plenty of references available.

What does a socket server need to do?

A socket server needs to be able to listen on a specific port, accept connections and read and write data from the socket. A high performance and scaleable socket server should use asynchronous socket IO and IO completion ports. Since we're using IO completion ports we need to maintain a pool of threads to service the IO completion packets. If we were to confine ourselves to running on Win2k and above we could use the QueueUserWorkItem api to deal with our threading requirements but to enable us to run on the widest selection of operating systems we have to do the work ourselves.

Before we can start accepting connections we need to have a socket to listen on. Since there are many different ways to set such a socket up, we'll allow the user's derived class to create this socket by providing a virtual function as follows:

   virtual SOCKET CreateListeningSocket(
      unsigned long address,
      unsigned short port);

The server class provides a default implementation that's adequate in most circumstances. It looks something like this:

   SOCKET CSocketServer::CreateListeningSocket(
      unsigned long address,
      unsigned short port)
   {
      SOCKET s = ::WSASocket(AF_INET, SOCK_STREAM, IPPROTO_IP, NULL, 0, 
                             WSA_FLAG_OVERLAPPED); 

      if (s == INVALID_SOCKET)
      {
         throw CWin32Exception(_T("CSocketServer::CreateListeningSocket()"), 
                               ::WSAGetLastError());
      }

      CSocket listeningSocket(s);

      CSocket::InternetAddress localAddress(address, port);

      listeningSocket.Bind(localAddress);

      listeningSocket.Listen(5);

      return listeningSocket.Detatch();
   }

Note that we use a helper class, CSocket, to handle setting up our listening socket. This class acts as a "smart pointer" for sockets, automatically closing the socket to release resources when it goes out of scope and also wraps the standard socket API calls with member functions that throw exceptions on failure.

Now that we have a socket to listen on we can expect to start receiving connections. We'll use the WSAAccept() function to accept our connections as this is easier to use than the higher performance AcceptEx() we'll then compare the performance characteristics with AcceptEx() in a later article.

When a connection occurs we create a Socket object to wrap the SOCKET handle. We associate this object with our IO completion port so that IO completion packets will be generated for our asynchronous IO. We then let the derived class know that a connection has occurred by calling the OnConnectionEstablished() virtual function. The derived class can then do whatever it wants with the connection, but the most common thing would be to issue a read request on the socket after perhaps writing a welcome message to the client.

   void CSocketServer::OnConnectionEstablished(
      Socket *pSocket,
      CIOBuffer *pAddress)
   {
      const std::string welcomeMessage("+OK POP3 server ready\r\n");

      pSocket->Write(welcomeMessage.c_str(), welcomeMessage.length());

      pSocket->Read();
   }

Asynchronous IO

Since all of our IO operations are operating asynchronously they return immediately to the calling code. The actual implementation of these operations is made slightly more complex by the fact that any outstanding IO requests are terminated when the thread that issued those requests exits. Since we wish to ensure that our IO requests are not terminated inappropriately we marshal these calls into our socket server's IO thread pool rather than issuing them from the calling thread. This is done by posting an IO completion packet to the socket server's IO Completion Port. The server's worker threads know how to handle 4 kinds of operation: Read requests, read completions, write requests and write completions. The request operations are generated by calls to PostQueuedCompletionStatus and the completions are generated when calls to WSARecv and WSASend complete asynchronously.

To be able to read and write data we need somewhere to put it, so we need some kind of memory buffer. To reduce memory allocations we could pool these buffers so that we don't delete them once they're done with but instead maintain them in a list for reused. Our data buffers are managed by an allocator which is configured by passing arguments to the constructor of our socket server. This allows the user to set the size of the IO buffers used as well as being able to control how many buffers are retained in the list for reuse. The CIOBuffer class serves as our data buffer follows the standard IO Completion Port pattern of being an extended "overlapped" structure.

As all good references on IO Completion Ports tell you, calling GetQueuedCompletionStatus blocks your thread until a completion packet is available and, when it is, returns you a completion key, the number of bytes transferred and an "overlapped" structure. The completion key represents 'per device' data and the overlapped structure represents 'per call' data. In our server we use the completion key to pass our Socket class around and the overlapped structure to pass our data buffer. Both our Socket class and our data buffer class allow the user to associate 'user data' with them. This is in the form of a single unsigned long value (which could always be used to store a pointer to a larger structure).

The socket server's worker threads loop continuously, blocking on their completion port until work is available and then extracting the Socket and CIOBuffer from the completion data and processing the IO request. The loop looks something like this:

   int CSocketServer::WorkerThread::Run()
   {
      while (true)   
      {
         DWORD dwIoSize = 0;
         Socket *pSocket = 0;
         OVERLAPPED *pOverlapped = 0;
         
         m_iocp.GetStatus((PDWORD_PTR)&pSocket, &dwIoSize, &pOverlapped);

         CIOBuffer *pBuffer = CIOBuffer::FromOverlapped(pOverlapped);

         switch pBuffer->GetUserData()
         {
            case IO_Read_Request :
               Read(pSocket, pBuffer);
            break;
         
            case IO_Read_Completed :
               ReadCompleted(pSocket, pBuffer);
            break;

            case IO_Write_Request :
               Write(pSocket, pBuffer);
            break;

            case IO_Write_Completed :
               WriteCompleted(pSocket, pBuffer);
            break;
         } 
      }
   }

Read and write requests cause a read or write to be performed on the socket. Note that the actual read/write is being performed by our IO threads so that they cannot be terminated early due to the thread exiting. The ReadCompleted() and WriteCompleted() methods are called when the read or write actually completes. The worker thread marshals these calls into the socket server class and the socket server provides two virtual functions to allow the caller's derived class to handle the situations. Most of the time the user will not be interested in the write completion, but the derived class is the only place that read completion can be handled.

   virtual void ReadCompleted(
      Socket *pSocket,
      CIOBuffer *pBuffer) = 0;

   virtual void WriteCompleted(
      Socket *pSocket,
      CIOBuffer *pBuffer);

Our client can provide their own worker thread if they wish, it should derive from the socket server's worker thread. If the client decides to do this then we need to have a way for the server to be configured to use this derived worker thread rather than the default one. Whenever the server creates a worker thread (and this only occurs when the server first starts as the threads run for the life time of the server) it calls the following virtual function:

   virtual WorkerThread *CreateWorkerThread(
      CIOCompletionPort &iocp);

If we want to provide our own implementation of the worker thread then we should override this function and create our thread object and return it to the caller.

Graceful shutdown

The send and receive sides of a socket can be closed independently. When a client closes the send side of its connection to a server any reads pending on the socket on the server will return with a value of 0. The derived class can opt to receive a notification when the client closes the send side of its connection by overriding the following virtual function.

   virtual void OnConnectionClientClose(
      Socket *pSocket);

The server will only receive this notification once even if it had multiple reads outstanding on the socket when the client closed it. The server will not receive 0 length read completions. The closure of the client's send side of the socket, the server's receive side, does not prevent the server from sending more data to the client it simply means that the client has no more data to send to the server.

The server can shutdown the connection using the Shutdown() method on the Socket class. Like the underlying WinSock2 function, shutdown takes a value that indicates which parts of the connection should be shutdown. If the server has finished sending data then it can call Shutdown() with SD_SEND to terminate the send side of the connection, SD_RECEIVE to terminate the receive side, or with SD_BOTH to terminate both sides. Shutting down the send side of the server's connection will only actually occur once all outstanding writes have completed. This allows the server developer to write code such as that shown below without having to worry about there being a race condition between the write being processed by the IO thread and the shutdown occurring.

   pSocket->Write(pBuffer);
   pSocket->Shutdown(SD_SEND);

Socket closure

The socket is closed when there are no outstanding reads or writes on the socket and no references to the socket are held. At this point the derived class is notified by a call to the OnConnectionClosing() virtual function.

   virtual bool OnConnectionClosing(
      Socket *pSocket);

The server's default implementation of this simply returns false which means that derived class doesn't want to be responsible for closing the socket. The socket server class then closes the socket after first turning off the linger option. This causes an abortive shutdown and sent data may be lost if it hasn't all been sent when the close occurs. The derived class may elect to handle socket closure itself and, if so, should override OnConnectionClosing() and return true to indicate that it has handled the closure. Before returning the socket should either have been explicitly closed by the derived class or AddRef() should be called and a reference held so that the socket can be closed later. The derived class will only get one chance to intervene in the closure of the socket, if it fails to close the socket then the socket will be abortively closed without further notifications when the final reference to the socket is released.

   bool CSocketServer::OnConnectionClosing(
      Socket *pSocket)
   {
      // we'll handle socket closure so that we can do a lingering close
      // note that this is not ideal as this code is executed on the an
      // IO thread. If we had a thread pool we could fire this off to the
      // thread pool to handle.

      pSocket->Close();

      return true;
   }

Note that OnConnectionClosing() is only called if the connection isn't explicitly closed by the server. If the server wishes to explicitly close the connection then it can do so by simply calling the Close() or AbortiveClose() methods of the Socket class.

A simple server

We now have a framework for creating servers. The user simply needs to provide a class that is derived from CSocketServer and handles the OnConnectionEstablished() and ReadCompleted() situations. The class could look something like this:

class CMySocketServer : CSocketServer
{
   public :

      CMySocketServer (
         unsigned long addressToListenOn,
         unsigned short portToListenOn);

   private :

      virtual void OnConnectionEstablished(
         Socket *pSocket,
         CIOBuffer *pAddress);

      virtual bool OnConnectionClosing(
         Socket *pSocket);

      virtual void ReadCompleted(
         Socket *pSocket,
         CIOBuffer *pBuffer);
};

Implementations for OnConnectionEstablished() and OnConnectionClosing() have already been presented above. Which leaves us with the implementation of our socket server's ReadCompleted() method. This is where the server handles incoming data and, in the case of a simple Echo server Wink | ;) it could be as simple as this:

   void CMySocketServer::ReadCompleted(
      Socket *pSocket,
      CIOBuffer *pBuffer)
   {
      pSocket->Write(pBuffer);
   }

YAES - Yet another echo server

A complete echo server is available for download here in JBSocketServer1.zip. The server simply echoes the incoming byte stream back to the client. In addition to implementing the methods discussed above the socket server derived class also implements several 'notification' methods that the server calls to inform the derived class of various internal goings on. The echo server simply outputs a message to the screen (and log file) when these notifications occur but the idea behind them is that the derived class can use them to report on internal server state via performance counters or suchlike.

You can test the echo server by using telnet. Simply telnet to localhost on port 5001 (the port that the sample uses by default) and type stuff and watch it get typed back at you. The server runs until a named event is set and then shuts down. The very simple Server Shutdown program, available here, provides an off switch for the server.

A slightly more real world example

Servers that do nothing but echo a byte stream are rare, except as poor examples. Normally a server will be expecting a message of some kind, the exact format of the message is protocol specific but two common formats are a binary message with some form of message length indicator in a header and an ASCII text message with a predefined set of 'commands' and a fixed command terminator, often "\r\n". As soon as you start to work with real data you are exposed to a real-world problem that is simply not an issue for echo servers. Real servers need to be able to break the input byte stream provided by the TCP/IP socket interface into distinct commands. The results of issuing a single read on a socket could be any number of bytes up to the size of the buffer that you supplied. You may get a single, distinct, message or you may only get half of a message, or 3 messages, you just can't tell. Too often inexperienced socket developers assume that they'll always get a complete, distinct, message and often their testing methods ensure that this is the case during development.

Chunking the byte stream

One of the simplest protocols that a server could implement is a packet based protocol where the first X bytes are a header and the header contains details of the length of the complete packet. The server can read the header, work out how much more data is required and keep reading until it has a complete packet. At this point it can pass the packet to the business logic that knows how to process it. The code to handle this kind of situation might look something like this:

   void CMySocketServer::ReadCompleted(
      Socket *pSocket,
      CIOBuffer *pBuffer)
   {
      pBuffer = ProcessDataStream(pSocket, pBuffer);

      pSocket->Read(pBuffer);
   }

   CIOBuffer *CMySocketServer::ProcessDataStream(
      Socket *pSocket,
      CIOBuffer *pBuffer)
   {
      bool done;

      do
      {
         done = true;

         const size_t used = pBuffer->GetUsed();

         if (used >= GetMinimumMessageSize())
         {
            const size_t messageSize = GetMessageSize(pBuffer);

            if (used == messageSize)
            {
               // we have a whole, distinct, message

               EchoMessage(pSocket, pBuffer);

               pBuffer = 0;

               done = true;
            }
            else if (used > messageSize)
            {
               // we have a message, plus some more data
               // allocate a new buffer, copy the extra data into it and try again...

               CIOBuffer *pMessage = pBuffer->SplitBuffer(messageSize);
            
               EchoMessage(pSocket, pMessage);

               pMessage->Release();

               // loop again, we may have another complete message in there...
      
               done = false;
            }
            else if (messageSize > pBuffer->GetSize())
            {
               Output(_T("Error: Buffer too small\nExpecting: ") + ToString(messageSize) +
                  _T("Got: ") + ToString(pBuffer->GetUsed()) + _T("\nBuffer size = ") + 
                  ToString(pBuffer->GetSize()) + _T("\nData = \n") + 
                  DumpData(pBuffer->GetBuffer(), pBuffer->GetUsed(), 40));

               pSocket->Shutdown();

               // throw the rubbish away
               pBuffer->Empty();
            
               done = true;
            }
         }
      }
      while (!done);

      // not enough data in the buffer, reissue a read into the same buffer 
      // to collect more data
      return pBuffer;
   }

The key points of the code above are that we need to know if we have at least enough data to start looking at the header, if we do then we can work out the size of the message somehow. Once we know that we have the minimum amount of data required we can work out if we have all the data that makes up this message. If we do, great, we process it. If the buffer only contains our message then we simply process the message and since processing simply involves us posting a write request for the data buffer we return 0 so that the next read uses a new buffer. If we have a complete message and some extra data then we split the buffer into two, a new one with our complete message in it and the old one which has the extra data copied to the front of the buffer. We then pass our complete message to the business logic to handle and loop to handle the data that we had left over. If we don't have enough data we return the buffer and the Read() that we issue in ReadCompleted() reads more data into the same buffer, starting at the point that we're at now.

Since we're a simple server we have a fairly important limitation, all our messages must fit into the IO buffer size that our server is using. Often this is a practical limitation, maximum message sizes can be known in advance and by setting our IO buffer size to be at least our maximum message size we avoid having to copy data around. If this isn't a viable limitation for your server then you'll need to have an alternative strategy here, copying data out of IO buffers and into something big enough to hold your whole message, or, processing the message in pieces...

In our simple server if the message is too big then we simply shutdown the socket connection, throw away the garbage data, and wait for the client to go away...

So how do we implement GetMinimumMessageSize() and GetMessageSize(), well, obviously it's protocol dependant, but for our packet echo server we do it like this:

   size_t CMySocketServer::GetMinimumMessageSize() const
   {
      return 1;
   }

   size_t CMySocketServer::GetMessageSize(CIOBuffer *pBuffer) const
   { 
      size_t messageSize = *pBuffer->GetBuffer();
   
      return messageSize;
   } 

Reference counted buffers?

You may have noticed that in the case where we had a message and some extra data we called SplitBuffer() to break the complete message out into its own buffer, and then, once we'd dealt with it, we called Release(). This is a little of the implementation of the socket server's buffer allocator poking through. The buffers are reference counted. The only time we need to worry about this is if we create a new buffer using SplitBuffer, or if we decide to call AddRef() on the buffer because we wish to pass it off to another thread for processing. We'll cover this in more detail in the next article, but the gist of it is that every time we post a read or a write the buffer's reference count goes up and every time a read or write completes the count goes down, when there are no outstanding references the buffer goes back into the pool for reuse.

A packet echo server

A packet based echo server is available for download here in JBSocketServer2.zip. The server expects to receive packets of up to 256 bytes which have a 1 byte header. The header byte contains the total length of the packet (including the header). The server reads complete packets and echoes them back to the client. You can test the echo server by using telnet, if you're feeling clever Wink | ;) Simply telnet to localhost on port 5001 (the port that the sample uses by default) and type stuff and watch it get typed back at you. (Hint, CTRL B is 2 which is the smallest packet that contains data).

A real internet RFC protocol

Some of the common internet protocols, such as RFC 1939 (POP3), use a crlf terminated ASCII text stream command structure. An example of how such a server might be implemented using the CSocketServer classes presented here can be found in JBSocketServer3.zip

What next?

The classes presented here provide an easy way to develop scalable socket servers using IO completion and thread pooling in such a way that the user of the classes need not concern themselves with these low level issues. To create your own server simply derive from CSocketServer and handle connection establishment and the byte stream chunking and business logic. You can also opt to handle any of the notifications that you require. Running your server is as simple as this:

   CSocketServer server(
      "+OK POP3 server ready\r\n",
      INADDR_ANY,                   // address to listen on
      5001,                         // port to listen on
      10,                           // max number of sockets to keep in the pool
      10,                           // max number of buffers to keep in the pool
      1024);                        // buffer size 

   server.Start();

   server.StartAcceptingConnections();

Your code can then do whatever it likes and the socket server runs on its own threads. When you are finished, simply call:

server.WaitForShutdownToComplete();

And the socket server will shutdown.

In the next article we address the issue of moving the business logic out of the IO thread pool and into a thread pool of its own so that long operations don't block the IO threads.

Revision history

  • 21st May 2002 - Initial revision.
  • 27th May 2002 - Added pause/resume functionality to all servers and the server shutdown program. Use CSocket to protect from resource leaks when creating the listening socket. Refactored the Socket and CIOBuffer classes so that common list management code is now in CNodeList and common user data code is now in COpaqueUserData.
  • 29th May 2002 - Linting and general code cleaning
  • 18th June 2002 - Removed call to ReuseAddress() during the creation of the listening socket as it not required - Thanks to Alun Jones for pointing this out to me.
  • 28th June 2002 - Adjusted how we handle socket closure and added the graceful shutdown and socket closure sections to the article.
  • 30th June 2002 - Removed the requirement for users to subclass the worker thread class. All of the work can now be done by simply subclassing the socket server class.
  • 15th July 2002 - Socket closure notifications now occur when the server shuts down whilst there are active connections. SocketServer can now be set to ensure read and write packet sequences.
  • 12th August 2002 - Removed the race condition in socket closure - Thanks to David McConnell for pointing this out. Derived class can receive connection reset and connection error notifications. Socket provides a means to determine if send/receive are connected. General code cleaning and lint issues.

Other articles in the series

  1. A reusable socket server class
  2. Business logic processing in a socket server
  3. Speeding up socket server connections with AcceptEx
  4. Handling multiple pending socket read and write operations
  5. Testing socket servers with C# and .Net
  6. A high performance TCP/IP socket server COM component for VB

License

This article, along with any associated source code and files, is licensed under The Code Project Open License (CPOL)

Share

About the Author

Len Holgate
Software Developer (Senior) JetByte Limited
United Kingdom United Kingdom
Len has been programming for over 30 years, having first started with a Sinclair ZX-80. Now he runs his own consulting company, JetByte Limited and has a technical blog here.
 
JetByte provides contract programming and consultancy services. We can provide experience in COM, Corba, C++, Windows NT and UNIX. Our speciality is the design and implementation of systems but we are happy to work with you throughout the entire project life-cycle. We are happy to quote for fixed price work, or, if required, can work for an hourly rate.
 
We are based in London, England, but, thanks to the Internet, we can work 'virtually' anywhere...
 
Please note that many of the articles here may have updated code available on Len's blog and that the IOCP socket server framework is also available in a licensed, much improved and fully supported version, see here for details.

Comments and Discussions

 
Generalbug found in PacketEchoServer Pinmemberwshcdr2-Sep-10 19:55 
GeneralRe: bug found in PacketEchoServer PinmemberLen Holgate7-Sep-10 6:42 
General[Message Deleted] Pinmemberit.ragester2-Apr-09 21:58 
Generalerror when it runs long times. Pinmemberyuanzy9729-Oct-08 4:01 
GeneralRe: error when it runs long times. PinmemberLen Holgate29-Oct-08 5:03 
GeneralRe: error when it runs long times. [modified] Pinmemberyuanzy9729-Oct-08 6:22 
GeneralRe: error when it runs long times. PinmemberLen Holgate14-Nov-08 6:30 
JokeRe: error when it runs long times. PinmemberNo_CooL18-Feb-10 5:40 
Generalbad pointer Pinmemberyuanzy9726-Oct-08 8:04 
GeneralRe: bad pointer Pinmemberyuanzy9726-Oct-08 8:09 
GeneralRe: bad pointer PinmemberLen Holgate26-Oct-08 8:46 
GeneralRe: bad pointer Pinmemberyuanzy9726-Oct-08 9:09 
Generalnice work. feshman need help Pinmemberyuanzy9715-Oct-08 6:13 
GeneralRe: nice work. feshman need help PinmemberLen Holgate15-Oct-08 6:17 
GeneralRe: nice work. feshman need help Pinmemberyuanzy9715-Oct-08 6:53 
GeneralRe: nice work. feshman need help PinmemberLen Holgate15-Oct-08 7:02 
GeneralRe: nice work. feshman need help [modified] Pinmemberyuanzy9715-Oct-08 7:42 
QuestionHow do i use this in C# ?? Pinmemberminori_aoi7-Aug-07 3:26 
AnswerRe: How do i use this in C# ?? PinmemberLen Holgate7-Aug-07 3:38 
GeneralRe: How do i use this in C# ?? Pinmemberminori_aoi8-Aug-07 21:18 
GeneralRe: How do i use this in C# ?? PinmemberLen Holgate8-Aug-07 21:29 
GeneralWin32Tools with /clr option Pinmemberjuchicaiza12-Jun-07 4:39 
QuestionLimiting bandwidth PinmemberGrotichaz Morek18-May-07 5:32 
AnswerRe: Limiting bandwidth PinmemberLen Holgate20-May-07 22:12 
GeneralRe: Limiting bandwidth PinmemberGrotichaz Morek23-May-07 9:30 

General General    News News    Suggestion Suggestion    Question Question    Bug Bug    Answer Answer    Joke Joke    Rant Rant    Admin Admin   

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.

| Advertise | Privacy | Mobile
Web04 | 2.8.140814.1 | Last Updated 18 Aug 2002
Article Copyright 2002 by Len Holgate
Everything else Copyright © CodeProject, 1999-2014
Terms of Service
Layout: fixed | fluid