Click here to Skip to main content
11,647,659 members (58,126 online)
Click here to Skip to main content

Using color gradients as backgrounds in your dialogs and views

, 9 Jun 2002 CPOL 230.3K 85
Rate this:
Please Sign up or sign in to vote.
Beginner article that shows how you can create horizontal, vertical and diagonal backgrounds. Also tells you what to watch out for, to avoid flickering when doing complicated drawing.

Gradients

Gradients are beautiful, have always been so and will continue being beautiful. Oops! What am I doing here? I guess I got carried away a little. Pardon me. Well seriously speaking, there are times when it would be nice to have a gradient background for our windows. I think the first time I remember seeing gradients was in the Setup programs generated by Install Shield. Even during the Windows 3.11 days, they had Setup programs that typically used a Blue gradient as their background. And recently while I have been making CP stats using PowerPoint, I use an Orange gradient as my presentation's background. Well creating gradients is not a big deal as I found out.

Horizontal gradients

This one uses two dark colors to create the gradient effect

This one uses green and white as the two border colors and a gradient is filled smoothly between these colors

Well, all you need to do is to override OnEraseBkgnd in your CWnd class. We start with one color and slowly change the RGB values till we end up with the other color. It's basically mathematics and I am not really good at maths. So the algorithm I have used might not be perfect and I apologize to you for that. But it portrays how to get a gradient effect which is what I wanted. If better mathematicians than me can give me an easier formula I'd be very happy about that.

CDialog::OnEraseBkgnd(pDC);

CRect rect;
GetClientRect(&rect);

int r1=127,g1=127,b1=56; //Any start color
int r2=5,g2=55,b2=165; //Any stop color

for(int i=0;i<rect.Width();i++)
{ 
    int r,g,b;
    r = r1 + (i * (r2-r1) / rect.Width());
    g = g1 + (i * (g2-g1) / rect.Width());
    b = b1 + (i * (b2-b1) / rect.Width());
    pDC->FillSolidRect(i,0,1,rect.Height(),RGB(r,g,b));
}


return true;

Vertical gradients

I use a black to red gradient here

This uses two fluorescent colors and I don't recommend this sort of combination as it hurts the eyes

Similar to the horizontal gradient we override OnEraseBkgnd

CDialog::OnEraseBkgnd(pDC);

CRect rect;
GetClientRect(&rect);

int r1=127,g1=127,b1=56; //Any start color
int r2=5,g2=55,b2=165; //Any stop color

for(int i=0;i<rect.Height();i++)
{ 
    int r,g,b;
    r = r1 + (i * (r2-r1) / rect.Height());
    g = g1 + (i * (g2-g1) / rect.Height());
    b = b1 + (i * (b2-b1) / rect.Height());
    pDC->FillSolidRect(0,i,rect.Width(),1,RGB(r,g,b));
}


return true;

Diagonal gradients

A beautiful bluish gradient. Just like those Installshield backgrounds

Pink, for the *ahem* ladies here Smile | :)

Diagonal gradients are slightly tricky. Unlike horizontal and vertical gradients we are not handling rectangles here. So we will not be able to use FillSolidRect for our purpose. In fact we need to use MoveTo and LineTo in a rather heavy loop. Being a novice at this GDI stuff, I put all my code in OnEraseBkgnd. The painting was so slow that it almost seemed like an animation. I was disappointed to say the least. That's when some of the gurus here suggested that I use a memory DC. So I used CreateCompatibleDC to create a memory DC and drew directly onto this DC. Then I used BitBlt to blast it into the actual DC. Well, there was considerable improvement. Now the animation effect was gone. But still there was a very noticeable flicker. This was really bad. But there was too much looping in the painting code. That's when I got this idea of keeping a CBitmap member. During initialization I'll draw all my gradient stuff into this CBitmap. Now all I needed to do in OnEraseBkgnd was to BitBlt this bitmap into the DC and voila, things were fast and smooth once again.

CDialog::OnEraseBkgnd(pDC);

CRect rect;
GetClientRect(&rect);

CDC dc2;
dc2.CreateCompatibleDC(pDC);
CBitmap *oldbmap=dc2.SelectObject(&m_bitmap);

/*We copy the bitmap into the DC*/ 
pDC->BitBlt(0,0,rect.Width(),rect.Height(),&dc2,0,0,SRCCOPY);
dc2.SelectObject(oldbmap);

return true;

And I wrote a function called MakeBitmap which creates the gradient bitmap and puts it into our CBitmap member. In my dialog based application I called MakeBitmap inside OnInitDialog. In your SDI programs I guess you are supposed to call MakeBitmap inside OnInitialUpdate.

void CYourClassName::MakeBitmap()
{
    CPaintDC dc(this);
    CRect rect;
    GetClientRect(&rect);

    int r1=245,g1=190,b1=240;
    int r2=130,g2=0,b2=0;

    int x1=0,y1=0;
    int x2=0,y2=0;

    CDC dc2;
    dc2.CreateCompatibleDC(&dc);

    if(m_bitmap.m_hObject)
        m_bitmap.DeleteObject();
    m_bitmap.CreateCompatibleBitmap(&dc,rect.Width(),
        rect.Height());

    CBitmap *oldbmap=dc2.SelectObject(&m_bitmap);

    while(x1 < rect.Width() && y1 < rect.Height())
    {
        if(y1 < rect.Height()-1)
            y1++;
        else
            x1++;

        if(x2 < rect.Width()-1)
            x2++;
        else
            y2++;

        int r,g,b;
        int i = x1+y1;
        r = r1 + (i * (r2-r1) / (rect.Width()+rect.Height()));
        g = g1 + (i * (g2-g1) / (rect.Width()+rect.Height()));
        b = b1 + (i * (b2-b1) / (rect.Width()+rect.Height()));

        CPen p(PS_SOLID,1,RGB(r,g,b));
        CPen *oldpen = dc2.SelectObject(&p); 

        dc2.MoveTo(x1,y1);
        dc2.LineTo(x2,y2);

        dc2.SelectObject(oldpen);
    } 

    dc2.SelectObject(oldbmap);

}

Conclusion

All the screenshots in this article have been resized using Adobe Photoshop 6 and I'd like to thank Ravi Bhavnani for his image resizing tips.

License

This article, along with any associated source code and files, is licensed under The Code Project Open License (CPOL)

Share

About the Author

Nish Nishant
United States United States
Nish Nishant is a Software Architect/Consultant based out of Columbus, Ohio. He has over 15 years of software industry experience in various roles including Lead Software Architect, Principal Software Engineer, and Product Manager. Nish is a recipient of the annual Microsoft Visual C++ MVP Award since 2002 (13 consecutive awards as of 2014). Nish is an industry acknowledged expert in the Microsoft technology stack. He authored C++/CLI in Action for Manning Publications in 2005, and had previously co-authored Extending MFC Applications with the .NET Framework for Addison Wesley in 2003. In addition, he has over 140 published technology articles on CodeProject.com and another 250+ blog articles on his WordPress blog. Nish is vastly experienced in team management, mentoring teams, and directing all stages of software development. Contact Nish : You can reach Nish on his google email id voidnish. Website and Blog

You may also be interested in...

Comments and Discussions

 
Questionand OpenGL? Pin
h.gonzalez4-May-04 1:06
sussh.gonzalez4-May-04 1:06 
AnswerRe: and OpenGL? Pin
Sonny Aman25-Apr-07 20:13
memberSonny Aman25-Apr-07 20:13 
GeneralRe: and OpenGL? Pin
Hugo GC26-Jul-07 1:31
memberHugo GC26-Jul-07 1:31 

General General    News News    Suggestion Suggestion    Question Question    Bug Bug    Answer Answer    Joke Joke    Rant Rant    Admin Admin   

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.

| Advertise | Privacy | Terms of Use | Mobile
Web03 | 2.8.150804.3 | Last Updated 10 Jun 2002
Article Copyright 2002 by Nish Nishant
Everything else Copyright © CodeProject, 1999-2015
Layout: fixed | fluid