Configurable Aspects for Windsor Container

• Download source - 280.76 KB

Introduction

In the article, Configurable Aspects for MEF, I introduced a configurable AOP model for MEF based on the Dynamic Decorator. The same model can be applied to other IoC containers like Unity or Windsor, etc.

In this article, I describe the AOP model for Windsor IoC container. Using this model, you configure aspects for objects in application configuration file and use a customized Windsor container to bring the objects in life with the aspects attached to them.

Background

The Dynamic Decorator is a tool for extending functionality of objects by attaching behaviors to them instead of by modifying their classes or creating new classes. It is attractive because it saves you from design or redesign of your classes. Please read the articles Dynamic Decorator Pattern and Add Aspects to Object Using Dynamic Decorator to understand more about the Dynamic Decorator, what problems it tries to solve, how it solves the problems and its limits.

There are several other articles that discuss how the Dynamic Decorator is used for application development and compare it with other similar technologies. Please refer to the References section of this article for them.

Once you go over some of the articles, you will see that the Dynamic Decorator is simple to use and powerful. In this article, I describe a configurable model of the Dynamic Decorator, which makes its use even easier and still as powerful. This model is then integrated with the Windsor container so that an object coming out from Windsor container has aspects attached already.

Using this model, you configure aspects for your objects in application configuration files. Then, a customized Windsor container brings your objects in life and wires them with the aspects based on the configurations. By the time you use the objects, the functionality defined by aspects has already attached to the objects.

Example

Say, you have a simple component Employee that implements two interfaces IEmployee and INotifyPropertyChanged as follows:

public interface IEmployee
{
    System.Int32? EmployeeID { get; set; }
    System.String FirstName { get; set; }
    System.String LastName { get; set; }
    System.DateTime DateOfBirth { get; set; }
    System.Int32? DepartmentID { get; set; }
    System.String DetailsByLevel(int iLevel);//1-full name;
	//2-full name plus birth day; 3-full name plus birth day and department id.
}

public interface INotifyPropertyChanged
{
    event PropertyChangedEventHandler PropertyChanged;
}

public class Employee : IEmployee, INotifyPropertyChanged
{
    public event PropertyChangedEventHandler PropertyChanged;

    public void NotifyPropertyChanged(String info)
    {
        if (PropertyChanged != null)
        {
            PropertyChanged(this, new PropertyChangedEventArgs(info));
        }
    }

    #region Properties

    public System.Int32? EmployeeID { get; set; }
    public System.String FirstName { get; set; }
    public System.String LastName { get; set; }
    public System.DateTime DateOfBirth { get; set; }
    public System.Int32? DepartmentID { get; set; }

    #endregion

    public Employee(
        System.Int32? employeeid
        , System.String firstname
        , System.String lastname
        , System.DateTime bDay
        , System.Int32? departmentID
    )
    {
        this.EmployeeID = employeeid;
        this.FirstName = firstname;
        this.LastName = lastname;
        this.DateOfBirth = bDay;
        this.DepartmentID = departmentID;
    }

    public Employee() { }

    public System.String DetailsByLevel(int iLevel)
    {
        System.String s = "";

        switch (iLevel)
        {
            case 1:
                s = "Name:" + FirstName + " " + LastName + ".";
                break;

            case 2:
                s = "Name: " + FirstName + " " + LastName + ",
			Birth Day: " + DateOfBirth.ToShortDateString() + ".";
                break;

            case 3:
                s = "Name: " + FirstName + " " + LastName + ",
			Birth Day: " + DateOfBirth.ToShortDateString() + ",
			Department:" + DepartmentID.ToString() + ".";
                break;

            default:
                break;

        }
        return s;
    }
}

Define Aspects

Aspects are cross-cutting concerns. For Dynamic Decorator, an aspect is a method that takes an AspectContext type object as its first parameter and an object[] type object as its second parameter and returns void.

You may design your aspects in a more general way to use them in various situations. You may also design your aspects for some particular situations. For example, you can define your entering/exiting log aspects in a general way and put them in the class SysConcerns as follows:

public class SysConcerns
{
    static SysConcerns()
    {
        ConcernsContainer.runtimeAspects.Add
		("DynamicDecoratorAOP.SysConcerns.EnterLog",
		new Decoration(SysConcerns.EnterLog, null));
        ConcernsContainer.runtimeAspects.Add
		("DynamicDecoratorAOP.SysConcerns.ExitLog",
		new Decoration(SysConcerns.ExitLog, null));
    }

    public static void EnterLog(AspectContext ctx, object[] parameters)
    {
        StackTrace st = new StackTrace(new StackFrame(4, true));
        Console.Write(st.ToString());

        IMethodCallMessage method = ctx.CallCtx;
        string str = "Entering " + ctx.Target.GetType().ToString() + "." +
			method.MethodName +
            "(";
        int i = 0;
        foreach (object o in method.Args)
        {
            if (i > 0)
                str = str + ", ";
            str = str + o.ToString();
        }
        str = str + ")";

        Console.WriteLine(str);
        Console.Out.Flush();

    }

    public static void ExitLog(AspectContext ctx, object[] parameters)
    {
        IMethodCallMessage method = ctx.CallCtx;
        string str = "Exiting " + ctx.Target.GetType().ToString() + "." +
			method.MethodName +
            "(";
        int i = 0;
        foreach (object o in method.Args)
        {
            if (i > 0)
                str = str + ", ";
            str = str + o.ToString();
        }
        str = str + ")";

        Console.WriteLine(str);
        Console.Out.Flush();
    }
}

As you can see, these methods access Target and CallCtx in a general way and can be shared by various types of objects to write entering/exiting logs.

On the other hand, some aspects may need to access more specific information. For example, you want to attach a change notification functionality only to an Employee object when its property is set. The following code defines some specific aspects.

class LocalConcerns
{
    static LocalConcerns()
    {
        ConcernsContainer.runtimeAspects.Add
		("ConsoleUtil.LocalConcerns.NotifyChange",
		new Decoration(LocalConcerns.NotifyChange, null));
        ConcernsContainer.runtimeAspects.Add
		("ConsoleUtil.LocalConcerns.SecurityCheck",
		new Decoration(LocalConcerns.SecurityCheck, null));
    }

    public static void NotifyChange(AspectContext ctx, object[] parameters)
    {
        ((Employee)ctx.Target).NotifyPropertyChanged(ctx.CallCtx.MethodName);
    }

    public static void SecurityCheck(AspectContext ctx, object[] parameters)
    {
        Exception exInner = null;

        try
        {
            if (parameters != null && parameters[0] is WindowsPrincipal &&
	    ((WindowsPrincipal)parameters[0]).IsInRole("BUILTIN\\" + "Administrators"))
            {
                return;
            }
        }
        catch ( Exception ex)
        {
            exInner = ex;
        }

        throw new Exception("No right to call!", exInner);
    }
}

In the above code, the NotifyChange method can only be used by a target of Employee while the SecurityCheck requires a WindowsPrincipal object as a parameter.

Note: You may already have noticed that there is a static constructor in each of the classes SysConcerns and LocalConcerns. Inside the static classes, each of the aspect methods defined in the classes is used to create an instance of Decoration which is then added to a dictionary ConcernsContainer.runtimeAspects. The definition of ConcernsContainer is as follows:

public class ConcernsContainer
{
    static public Dictionary<string, Decoration> runtimeAspects =
					new Dictionary<string, Decoration>();
}

The purpose of this Dictionary and the static constructors is to keep an inventory for all Decoration objects based on the aspect methods defined in the application and make them accessible by the corresponding method names. It makes it possible to configure aspects in the application configuration file by specifying the corresponding method names.

Configure Aspects

In the configuration file, you specify how aspects are associated with objects. Here are some examples to demonstrate how the aspects are configured.

<configuration>
    <configSections>
        <section name="DynamicDecoratorAspect"
	type="DynamicDecoratorAOP.Configuration.DynamicDecoratorSection,
	DynamicDecoratorAOP.Configuration" />
    </configSections>

    <DynamicDecoratorAspect>
        <objectTemplates>
            <add name="1"
                 type="ThirdPartyHR.Employee"
                 interface="ThirdPartyHR.IEmployee"
                 methods="DetailsByLevel,get_EmployeeID"
                 predecoration="SharedLib.SysConcerns.EnterLog,SharedLib.SysConcerns"
                 postdecoration=""/>
            <add name="2"
                 type="ThirdPartyHR.Employee"
                 interface="ThirdPartyHR.IEmployee"
                 methods="set_EmployeeID"
                 predecoration="ConsoleUtil.LocalConcerns.SecurityCheck"
                 postdecoration="ConsoleUtil.LocalConcerns.NotifyChange"/>
        </objectTemplates>
    </DynamicDecoratorAspect>
</configuration>

First of all, you need to add a section <DynamicDecoratorAspect> in your configuration file. Then, inside <objectTemplates> of <DynamicDecoratorAspect>, you add individual elements. For each element inside <objectTemplates>, the following attributes need to be specified:

• type - target type
• interface - interface returned
• methods - names of target methods which will be attached the aspects specified by predecoration and postdecoration
• predecoration - preprocessing aspect
• postdecoration - postprocessing aspect

Notes

1. The names in the value of the methods attribute are comma separated. For example, "DetailsByLevel,get_EmployeeID".
2. The value of the predecoration attribute has two parts and is separated by a comma. The first part specifies the aspect name while the second part specifies the assembly name in which the aspect is defined, for example, "SharedLib.SysConcerns.EnterLog,SharedLib.SysConcerns". If the second part is not specified, it is assumed that the aspect is defined in the entry assembly, for example, "ConsoleUtil.LocalConcerns.SecurityCheck".
3. The value of the postdecoration attribute has two parts and is separated by a comma. The first part specifies the aspect name while the second part specifies the assembly name in which the aspect is defined. If the second part is not specified, it is assumed that the aspect is defined in the entry assembly.

Use AOPWindsorContainer

The AOPWindsorContainer class is responsible for reading in aspect configurations, constructing target objects and wiring aspects to target objects. The following code demonstrates how it is used.

class Program
{
    static void Main(string[] args)
    {
        using (IWindsorContainer container = new WindsorContainer())
        {
            container.Register(AllTypes
                .FromAssembly(Assembly.LoadFrom("Employee.dll"))
                .Where(t => t.Name.Equals("Employee"))
                .Configure(c => c.LifeStyle.Transient)
            );

            AOPWindsorContainer aopcontainer = new AOPWindsorContainer(container);
            IEmployee emp = aopcontainer.Resolve<Employee, IEmployee>();
            emp.EmployeeID = 1;
            emp.FirstName = "John";
            emp.LastName = "Smith";
            emp.DateOfBirth = new DateTime(1990, 4, 1);
            emp.DepartmentID = 1;
            emp.DetailsByLevel(2);

            Employee target = null;
            IEmployee emp1 =
		aopcontainer.Resolve<Employee, IEmployee>("set_EmployeeID");
            try
            {
                //Commenting out this line will throw out an exception
                Thread.GetDomain().SetPrincipalPolicy(PrincipalPolicy.WindowsPrincipal);
                Decoration dec = ConcernsContainer.runtimeAspects
				["ConsoleUtil.LocalConcerns.SecurityCheck"];
                dec.Parameters = new object[] { Thread.CurrentPrincipal };

                target = aopcontainer.GetTarget<Employee>();
                target.PropertyChanged +=
		new PropertyChangedEventHandler(PropertyChanged_Listener);
                emp1.EmployeeID = 2;
            }
            catch (Exception ex)
            {
                Console.WriteLine(ex.Message);
            }
        }

        Console.ReadLine();
    }

    static void PropertyChanged_Listener(object sender, PropertyChangedEventArgs e)
    {
        Console.WriteLine(e.PropertyName.ToString() + " has changed.");
    }
}

You create an object container of WindsorContainer and use it as usual to register types, etc. Then, instead of using it to resolve to a business object, you create an aopcontainer of AOPWindsorContainer by passing the container object into its constructor. At this point, you can use the Resolve<T, V>() by specifying the target type T and the returned interface type V. For example, in the above code, you specify the Employee as the target type and IEmployee as returned interface type. It returns a proxy of IEmployee type. That's it. Now, when using the emp, it starts writing the entering log.

The Resolve<T, V>() finds the first matched element in the configuration file by looking for type attribute as T and interface attribute as V, and then, uses the element settings to create a proxy. For Resolve<Employee, IEmployee>(), it tries to find type attribute as "ThirdPartyHR.Employee" and interface attribute as "ThirdPartyHR.IEmployee" in the configuration file. The first element in the configuration is matched. Therefore, the value "DetailsByLevel,get_EmployeeID" of methods attribute, the value "SharedLib.SysConcerns.EnterLog,SharedLib.SysConcerns" of predecoration attribute and the value "" of postdecoration attribute are used to create a proxy. When using emp, only methods DetailsByLevel and get_EmployeeID will write the entering log.

The Resolve<T, V>(string methods) finds the first matched element in the configuration file by looking for type attribute as T, interface attribute as V and methods attribute as methods. For example, the code Resolve<Employee, IEmployee>("set_EmployeeID") tries to match type attribute as "ThirdPartyHR.Employee", interface attribute as "ThirdPartyHR.IEmployee" and methods attribute as "set_EmployeeID", and the second element in the configuration is matched. Therefore, the value "ConsoleUtil.LocalConcerns.SecurityCheck" of predecoration attribute and the value "ConsoleUtil.LocalConcerns.NotifyChange" of postdecoration attribute are used to create a proxy. When using emp1, only method set_EmployeeID will check the security before its invocation and raise a notification after its invocation.

There are a few more points worth noting. Before the emp1 invokes the aspect LocalConcerns.SecurityCheck, its parameters argument needs to be updated to a WindowsPrincipal object. It can be achieved by getting the Decoration object associated with the aspect using the Dictionary of the ConcernsContainer and then setting its Parameters property. The first three lines of the above code in the try block do this.

In order to capture the event raised from the aspect LocalConcerns.NotifyChange after the method set_EmployeeID sets the property, you need to register a listener to the target object of Employee before you call the method set_EmployeeID. To achieve this, you use GetTarget<T>() method of AOPWindsorContainer to get the target object, then, register the listener to the target object. The last three lines of code in try block do this.

When executing the program, you see the following output:

If you comment out the line Thread.GetDomain().SetPrincipalPolicy(PrincipalPolicy.WindowsPrincipal), you see the following output:

Summary

Configurable aspects combined with Windsor container make AOP very simple. You define your aspect methods and then add elements in application configuration file to associate your business objects with the aspects. Most of the time, that is all you need to do. In some special cases, you can still update the parameters argument of an aspect and get target object using code.

References

The following articles help you understand Dynamic Decorator and its features:

1. Dynamic Decorator Pattern
2. Add Aspects to Object Using Dynamic Decorator

The following articles discuss how the Dynamic Decorator can help you improve your application development:

1. Components, Aspects and Dynamic Decorator
2. Components, Aspects and Dynamic Decorator for ASP.NET Application
3. Components, Aspects and Dynamic Decorator for ASP.NET MVC Application
4. Components, Aspects and Dynamic Decorator for Silverlight / WCF Service Application
5. Components, Aspects and Dynamic Decorator for MVC/AJAX/REST Application

The following articles compare the Dynamic Decorator with some other similar tools:

1. Dynamic Decorator and Castle DynamicProxy Comparison
2. Dynamic Decorator, Unity and Castle DynamicProxy Comparison

The following articles discuss some miscellaneous topics regarding Dynamic Decorator and AOP:

1. Performance of Dynamic Decorator
2. Generic Dynamic Decorator
3. Aspects to Object vs. Aspects to Class

This article, along with any associated source code and files, is licensed under The Code Project Open License (CPOL)