- Introduced a new attribute for script tags to pin a script block and not allow it to be moved to the bottom
- Pin attribute format changed
Figure: Many scripts downloaded on a typical ASP.NET AJAX page having ASP.NET AJAX Control Toolkit.
You pay for such a high number of script downloads only because you use two extenders from AJAX Control Toolkit and the
UpdatePanel of ASP.NET AJAX.
If we can batch the multiple individual script calls into one call like Scripts.ashx as shown in the picture below and download several scripts together in one shot using an HTTP Handler, it saves us a lot of HTTP connections which could be spent doing other valuable work like downloading CSS for the page to show content properly or downloading images on the page that is visible to user.
The Scripts.ashx handler cannot only download multiple scripts in one shot, but also has a very short URL form. For example:
Compared to conventional ASP.NET
ScriptResource URLs like:
- Saves expensive network roundtrip latency where neither browser nor the origin server is doing anything, not even a single byte is being transmitted during the latency.
- Create less "pause" moments for the browser. So, browser can fluently render the content of the page and thus give the user a fast loading feel.
- Give browser move time and free HTTP connections to download visible artifacts of the page and thus give the user a "something's happening" feel.
- When IIS compression is enabled, the total size of individually compressed files is greater than multiple files compressed after they are combined. This is because each compressed byte stream has a compression header in order to decompress the content.
- This reduces the size of the page HTML as there are only a few handful of script tags. So, you can easily saves hundreds of bytes from the page HTML, especially when ASP.NET AJAX produces gigantic WebResource.axd and ScriptResource.axd URLs that have very large query parameters.
The solution is to dynamically parse the response of a page before it is sent to the browser and find out what script references are being sent to the browser. I have built an HTTP module which can parse the generated HTML of a page and find out what the script blocks being sent are. It then parses those script blocks and finds the scripts that can be combined. Then it takes out those individual script tags from the response and adds one script tag that generates the combined response of multiple script tags.
For example, the homepage of Dropthings.com produces the following script tags:
As you see, there are lots of large script tags, in total 15 of them. The solution I will show here will combine the script links and replace it with two script links that download 13 of the individual scripts. I have left two scripts out that are related to ASP.NET AJAX Timer extender.
As you see, 13 of the script links have been combined into two script links. The URL is also smaller than majority of the script references.
There are two steps involved here:
- Find out all the
script tags being emitted inside generated response HTML and collect them in a buffer. Move them after the visible artifacts in the HTML, especially the
<form> tag that contains the generated output of all ASP.NET controls on the page
- Parse the buffer and see which script references can be combined into one set. The sets are defined in a configuration file. Replace the individual script references with the combined set reference.
Step 1: Defer All Script Tags After Body Content
This approach is explained in this blog post. Here it is again:
ScriptManager control has a property
LoadScriptsBeforeUI, when set to
false, should load all AJAX framework scripts after the content of the page. But it does not effectively push down all scripts after the content. Some framework scripts, extender scripts and other scripts registered by Ajax Control Toolkit still load before the page content loads. The following screen taken from www.dropthings.com shows several script tags are still added at the beginning of
<form> which forces them to download first before the page content is loaded and displayed on the page. Script tags pause rendering on several browsers especially in Internet Explorer until the scripts download and execute. As a result, it gives user a slow loading impression as user stares at a white screen for some time until the scripts before the content download and execute completely. If browser could render the HTML before it downloads any script, user would see the page content immediately after visiting the site and not see a white screen. This will give user an impression that the Web site is blazingly fast (just like Google homepage) because user will ideally see the page content, if it's not too large, immediately after hitting the URL.
Figure: Script blocks being delivered before the content.
From the above screen shot, you see that there are some scripts from ASP.NET AJAX Framework and some scripts from Ajax Control Toolkit that are added before the content of the page. Until these scripts download, browsers don't see anything on the UI and thus you get a pause in rendering giving the user a slow load feeling. Each script to external URL adds about 200ms average network roundtrip delay outside USA while it tries to fetch the script. So, the user basically stares at a white screen for at least 1.5 sec no matter how fast an Internet connection he/she has.
These scripts are rendered at the beginning of form tag because they are registered using
Page.ClientScript.RegisterClientScriptBlock. Inside the
Page class of
System.Web, there's a method
BeginFormRender which renders the client script blocks immediately after the form tag.
1: internal void BeginFormRender(HtmlTextWriter writer, string formUniqueID)
0: if (this._fRequirePostBackScript)
2: this.RenderPostBackScript(writer, formUniqueID);
4: if (this._fRequireWebFormsScript)
Figure: Decompiled code from
Here you see that several script blocks including scripts registered by calling
ClientScript.RegisterClientScriptBlock are rendered right after form tag starts.
There's no easy work around to override the
BeginFormRender method and defer rendering of these scripts. These rendering functions are buried inside
System.Web and none of these are overridable. So, the only solution seems to be using a Response Filter to capture the HTML being written and suppress rendering the script blocks until it's the end of the
body tag. When the
</body> tag is about to be rendered, we can safely assume page content has been successfully delivered and now all suppressed script blocks can be rendered at once.
In ASP.NET 2.0, you need to create a Response Filter which is an implementation of a
Stream. You can replace default
Response.Filter with your own
stream and then ASP.NET will use your filter to write the final rendered HTML. When
Response.Write is called or
Render method fires, the response is written to the output stream via the filter. So, you can intercept every byte that's going to be sent to the client (browser) and modify it the way you like. Response Filters can be used in a variety of ways to optimize Page output like stripping off all white spaces or doing some formatting on the generated content, or manipulating the characters being sent to the browser and so on.
I have created a Response filter which captures all characters being sent to the browser. If it finds that script blocks are being rendered, instead of rendering it to the
Response.OutputStream, it will extract the script blocks out of the buffer being written and render the rest of the content. It stores all script blocks, both internal and external, in a string buffer. When it detects
</body> tag is about to be written to the response, it flushes all the captured script blocks from the string buffer.
1: public class ScriptDeferFilter : Stream
3: Stream responseStream;
4: long position;
6: 7: 8: 9: 0: bool captureScripts;
2: 3: 4: 5: 6: StringBuilder scriptBlocks;
8: Encoding encoding;
0: public ScriptDeferFilter(Stream inputStream, HttpResponse response)
2: this.encoding = response.Output.Encoding;
3: this.responseStream = response.Filter;
5: this.scriptBlocks = new StringBuilder(5000);
6: 7: this.captureScripts = true;
Here's the beginning of the
Filter class. When it initializes, it takes the original
Response Filter. Then it overrides the
Write method of the
Stream so that it can capture the buffers being written and do its own processing.
public override void Write(byte buffer, int offset, int count)
this.responseStream.Write(buffer, offset, count);
char charBuffer = this.encoding.GetChars(buffer, offset, count);
if (null != this.pendingBuffer)
content = new char[charBuffer.Length + this.pendingBuffer.Length];
Array.Copy(this.pendingBuffer, 0, content, 0, this.pendingBuffer.Length);
Array.Copy(charBuffer, 0, content, this.pendingBuffer.Length, charBuffer.Length);
this.pendingBuffer = null;
content = charBuffer;
int scriptTagStart = 0;
int lastScriptTagEnd = 0;
bool scriptTagStarted = false;
for (pos= 0; pos < content.Length; pos++)
char c = content[pos];
if (c == '<')
if (pos + "script".Length >= content.Length)
this.pendingBuffer = new char[content.Length - pos];
Array.Copy(content, pos, this.pendingBuffer, 0, content.Length - pos);
int tagStart = pos;
if (content[pos+1] == '/')
if (isScriptTag(content, pos))
pos = pos + "script>".Length;
scriptBlocks.Append(content, scriptTagStart, pos - scriptTagStart);
lastScriptTagEnd = pos;
scriptTagStarted = false;
else if (isBodyTag(content, pos))
if (this.scriptBlocks.Length > 0)
this.WriteOutput(content, lastScriptTagEnd, tagStart -
this.captureScripts = false;
this.WriteOutput(content, tagStart, content.Length - tagStart);
if (isScriptTag(content, pos+1))
scriptTagStart = pos;
scriptTagStart - lastScriptTagEnd);
pos += "<script".Length;
scriptTagStarted = true;
this.scriptBlocks.Append(content, scriptTagStart, pos - scriptTagStart);
this.WriteOutput(content, lastScriptTagEnd, pos - lastScriptTagEnd);
There are several situations to consider here. The
Write method is called several times during the
Page render process because the generated HTML can be quite big. So, it will contain partial HTML. So, it's possible the first
Write call contains a start of a script block, but no ending script tag. The following
Write call may or may not have the ending script block. So, we need to preserve state to make sure we don't overlook any script block. Each
Write call can have several script blocks in the buffer as well. It can also have no script block and only page content.
The idea here is to go through each character and see if there's any starting script tag. If there is, remember the start position of the script tag. If script end tag is found within the buffer, then extract out the whole script block from the buffer and render the remaining HTML. If there's no ending tag found, but a script tag did start within the buffer, then suppress output and capture the remaining content within the script buffer so that the next call to
Write method can grab the remaining script and extract it out from the output.
There are four other
private functions that are basically helper functions and do not do anything interesting. However, the
RenderAllScriptBlocks() function combines all the script tags using a configuration setting and emits one script tag for a group of script tags. This trick is explained later in step 2.
private void RenderAllScriptBlocks()
string output = CombineScripts.CombineScriptBlocks(this.scriptBlocks.ToString());
byte scriptBytes = this.encoding.GetBytes(output);
this.responseStream.Write(scriptBytes, 0, scriptBytes.Length);
private void WriteOutput(char content, int pos, int length)
if (length == 0) return;
byte buffer = this.encoding.GetBytes(content, pos, length);
this.responseStream.Write(buffer, 0, buffer.Length);
private bool isScriptTag(char content, int pos)
if (pos + 5 < content.Length)
return ((content[pos] == 's' || content[pos] == 'S')
&& (content[pos + 1] == 'c' || content[pos + 1] == 'C')
&& (content[pos + 2] == 'r' || content[pos + 2] == 'R')
&& (content[pos + 3] == 'i' || content[pos + 3] == 'I')
&& (content[pos + 4] == 'p' || content[pos + 4] == 'P')
&& (content[pos + 5] == 't' || content[pos + 5] == 'T'));
private bool isBodyTag(char content, int pos)
if (pos + 3 < content.Length)
return ((content[pos] == 'b' || content[pos] == 'B')
&& (content[pos + 1] == 'o' || content[pos + 1] == 'O')
&& (content[pos + 2] == 'd' || content[pos + 2] == 'D')
&& (content[pos + 3] == 'y' || content[pos + 3] == 'Y'));
isBodyTag functions may look weird. The reason for such weird code is pure performance. Instead of doing fancy checks like taking a part of the array out and doing
string comparison, this is the fastest way of doing the check. Best thing about .NET IL is that it's optimized, if any of the conditions in the
&& pairs fail, it won't even execute the rest. So, this is as best as it can get to check for certain characters.
There are some corner cases that are also handled here. For example, what if the buffer contains a partial script tag declaration. For example, "
....<scr" and that's it. The remaining characters did not finish in the buffer instead the next buffer is sent with the remaining characters like "
ipt src="..." >.....</scrip". In such a case, the
script tag won't be taken out. One way to handle this is to make sure there are enough characters left in the buffer to do a complete tag name check. If not found, store the half finished buffer somewhere and on the next call to
Write, combine it with the new buffer sent and do the processing.
In order to install the
Filter, you need to hook it in the
Global.asax BeginRequest or some other event that's fired before the
Response is generated.
1: protected void Application_BeginRequest(object sender, EventArgs e)
3: if (Request.HttpMethod == "GET")
5: if (Request.AppRelativeCurrentExecutionFilePath.EndsWith(".aspx"))
7: Response.Filter = new ScriptDeferFilter(Response);
Here, I am hooking the
Filter only for
GET calls to .aspx pages. You can hook it to
POST calls as well. But asynchronous postbacks are regular
POST and I do not want to do any change in the generated JSON or HTML fragment. Another way is to hook the filter only is when
When this filter is installed, www.dropthings.com defers all script loading after the
<form> tag completes.
You can grab the
Filter class from the App_Code\ScriptDeferFilter.cs of the
Dropthings project besides the source code attachment with this article. Go to CodePlex site and download the latest code of
Dropthings for the latest filter. I will keep fixing stuff and make modifications directly on the
Dropthings code base.
This filter collects all the script tags. So, we can easily parse the script tags and combine them. The next step is to combine the script tags.
Step 2: Combine Multiple Scripts Tags into One Script Tag
First we need to collect the script tags that will be combined and emitted as one. You cannot just combine all scripts on your page because sometimes a couple of scripts are downloaded and then some inline script blocks need those scripts. Then again couple of scripts are downloaded and then some other inline script blocks use them. In a typical ASP.NET AJAX page, first the ASP.NET AJAX framework,
UpdatePanel script and some
Extender scripts are downloaded. Then the Web service proxy, postback code and some other inline script tags follow. These script tags need the earlier framework scripts to be available. So, you need to first group those framework script tags into one set. Here's how I did it:
How do I know that these are the script blocks that can be downloaded in one batch? I look at the generated source code and find the script tags. I copy the
src="...." and paste it in the XML. While pasting, I XML Encode the URLs which means all
& in the URL gets converted to
I found that these are the script blocks that are loaded before any inline script tag is rendered. So, these are candidates for one batch download.
The next candidates are the ASP.NET AJAX extenders and some ASP.NET AJAX Control Toolkit extenders.
Here you see these scripts that can be downloaded in another batch. After these tags, I found another inline script block expecting these scripts to be available.
One thing to remember here, if your website is running under a virtual directory, all these URLs will have the virtual directory name in front of them. For example, /Dropthings/ScriptResource.axd?....
Also the URL names are case sensitive. Lastly, you will notice all ScriptResource.axd URLs have a parameter
t. This parameter comes after
& in the URL. When you XML Encode the whole URL, it will become "
&amp;t=....". Do not be afraid with the double encoding. That's how it should be.
Here's how the combining works:
- Select a set, e.g. "
Initial" and see if there's any
script tag having one of the URLs defined in the set.
- If a URL is found, remember the position. Because this is the position for the combined
- Remove the matched URL and remember the name of the matched URL e.g.
- Once all the URLs defined in the set are searched for, go back to the position where the first match was found. Generate a combined script tag URL. E.g.
Here's the code that does it all:
public static string CombineScriptBlocks(string scripts)
List<UrlMapSet> sets = LoadSets();
string output = scripts;
foreach (UrlMapSet UrlMapSet in sets)
int setStartPos = -1;
List<string> names = new List<string>();
output = _FindScriptTags.Replace
(output, new MatchEvaluator(delegate(Match match)
string url = match.Groups["url"].Value;
UrlMap urlMatch = UrlMapSet.Urls.Find(
return map.Url == url;
if( null != urlMatch )
if (setStartPos < 0) setStartPos = match.Index;
if (setStartPos >= 0)
string setName = string.Join(",", names.ToArray());
string urlPrefix = HttpContext.Current.Request.Path.
string newScriptTag =
+ UrlMapSet.Name + "=" + setName + "&" + urlPrefix + "\"></script>";
output = output.Insert(setStartPos, newScriptTag);
Next is the HTTP handler that does the work of combining multiple scripts into one. The handler Scripts.ashx looks at the query parameter and sees which set and what URLs in the sets are requested. It then internally downloads the scripts using
HttpWebRequest. When all scripts are downloaded, it combines them into one giant
string and emits it to the response.
public void ProcessRequest (HttpContext context)
string queryString = HttpUtility.UrlDecode(context.Request.QueryString.ToString());
string urlSplit = queryString.Split('&');
string setInfo = urlSplit;
string urlPrefix = urlSplit;
string tokens = setInfo.Split('=');
string setName = tokens;
string urlMaps = tokens.Split(',');
if (context.Cache[setInfo] == null)
UrlMapSet set = CombineScripts.LoadSets().Find(
new Predicate<UrlMapSet>(delegate(UrlMapSet match)
return match.Name == setName;
List<UrlMap> maps = set.Urls.FindAll(
new Predicate<UrlMap>(delegate(UrlMap map)
return Array.BinarySearch<string>(urlMaps, map.Name) >= 0;
string urlScheme = context.Request.Url.GetComponents
StringBuilder buffer = new StringBuilder();
foreach (UrlMap map in maps)
string fullUrl = map.Url;
if (map.Url.StartsWith("http://")) fullUrl = map.Url;
else if (map.Url.StartsWith(context.Request.ApplicationPath))
fullUrl = urlScheme + map.Url;
else fullUrl = urlScheme + urlPrefix + map.Url;
HttpWebRequest request = this.CreateHttpWebRequest(fullUrl);
using (HttpWebResponse response = request.GetResponse() as HttpWebResponse)
using (StreamReader reader =
string responseContent = reader.ReadToEnd();
string responseString = buffer.ToString();
encodedBytes = context.Request.ContentEncoding.GetBytes(responseString);
context.Cache.Add(setInfo, encodedBytes, null, DateTime.MaxValue,
TimeSpan.FromDays(1), System.Web.Caching.CacheItemPriority.Normal, null);
encodedBytes = context.Cache[setInfo] as byte;
context.Response.ContentEncoding = context.Request.ContentEncoding;
context.Response.OutputStream.Write(encodedBytes, 0, encodedBytes.Length);
The handler generates a proper cache header for the browser to cache the generated script for 30 days so that on repeated visits, the scripts are not requested over and over again. Moreover, it internally caches the combined scripts so that it does not need to fetch all those individual scripts repeatedly.
If you want to keep a script tag in its own position, e.g. Google Adwords or Analytics script blocks, then just add a
pin attribute to the script tag.