- Introduction to IIS 7.0
- Features of IIS 7.0
- Basic Architecture of IIS 7.0
- How to Deploy ASP.NET Websites on IIS 7.0
- How to Create Application Pool
- Assign Application Pool To Your Application
- Configure Web Garden on IIS 7.0
- IIS 6.0 Vs IIS 7.0
- Where Do I Get IIS 7.0
Microsoft Internet Information Services (IIS) 7.0 in Windows Server 2008 and Windows Vista provides a secure, manageable platform for developing and administrating and hosting Web applications and services. It has been completely redesigned and Restructured .IIS 7.0 provides features and functionality for administrators to effectively manage Web infrastructures; developers to rapidly build Web applications and services; and hosters to Web hosting.
Following are some features of IIS 7.0:
- IIS 7.0 provides features and functionality that enable administrators to reliably and effectively manage Web infrastructures.
- IIS 7.0 has a distributed file-based configuration system that enables IIS settings to be stored in web.config files along with the ASP.NET settings.
- IIS 7.0 provides a cost-effective, more scalable Web server platform for delivering reliable Web hosting to a broad set of customers.
Major innovations in IIS 7.0:
- A modular, extensible core Web server
- A unified, distributed file-based configuration system
- Integrated health monitoring and diagnostics
- A set of new administration tools with delegation support
For more features and product understanding, check here.
The following diagram shows the Overall Architecture of IIS 7.0 which contains HTTP.Sys, SvcHost.exe, Application Pool and Worker Process(W3Wp).
The main components of IIS 7.0 are HTTP.Sys, Svchost.Exe, Application Pool , Worker Process (W3WP.exe) and Configuration Store.
HTTP.Sys: It the Kernel mode Protocol stack which listens to the HTTP and HTTPS Request. W3SVC and WAS are the parts of Svchost.exe. W3SVC is the Listener of Request from kernel mode that is passed by the
HTTP.Sys. W3SVC also interacts with
Windows Activation Process which is managed by the worker process by starting, stopping and recycling the application pool. It was also responsible for Health Monitor of Application Pool during runtime. Configuration stores all web.config and ASP.NET Settings and other configuration in XML Hierarchy form. W3wp.exe is a long-running process that processes requests and generates responses.
The following diagram shows you the process flow of IIS 7.0. This is the flow of User Request to IIS and gets the Response from IIS.
User Request Pass from Kernel Level to User Level Via
Http.Sys and then passes to svchost, and then goes to Application Pool.
For more details, please click here.
From now onwards, I will describe one example to deploy your ASP.NET websites on IIS 7.0.
Step 1: From Visual Studio, publish your Web application.
Step 2: Copy the published application folder to "C:\intepub\wwwroot" [default] folder.
Step 3: From RUN - > inetmgr -> OK
The following screen will come. This is the main page for any application. There are three panels.
"TestWeb" is a recently pasted webapplication on your wwwroot folder.
Step 4: We need to convert it to an application, just right click and then Click on "ConvertToApplication" as shown in the following picture:
After converting it to application, its icon will be changed and then you can set the property for your web application from the middle pane. You can set IIS Authentication Mode, Default Page Just like IIS 6.0:
You can change Security Settings on Authentication Section. By default Setting will be set from your web.config itself. As in my web.config Form Authentication was set that's why, Forms Authentication has been Enabled. If we want to change the status, just double click and update status to Enabled to Disabled or Vice Versa.
Now one most important part is to set the Application Pool for your application.
A site can contain many applications including that site’s default application, which is called the root application. In addition to belonging to a site, an application belongs to an application pool, which isolates the application from applications in other application pools on the server .
Step 1: Right Click on Application Pool and give the name of your pool. Here, I have given "pool" and select Framework and click on OK:
Step 2: If you are writing some thing on the server [may be writes Error Events Logs], you need to change the Pool Identity to Local System. Right click on Pool Identity setting as shown in the following image:
There are three identities of Application Pool:
- Network Service
- Local Service
- Local System
Now, we need to assign the Application Pool to our web application.
Step 1: Right Click on "TestWeb" Application and Select "Advanced Settings":
Step 2: Finally assign your created Application Pool "
pool" to "
Now you can run your application by just typing http:\\localhost\testweb and it can be accessible on network by IP also.
I have split this section into some parts. These are:
Application pools are used to separate set of IIS worker processes that share the same configuration. Application pools enable us to isolate our web application for better security, reliability, and availability. The worker process serves as the process boundary that separates each application pool so that when one worker process or application is having an issue, other applications or worker processes are not affected.
Figure: Application Pool With Worker Process On IIS Server
In your IIS, there may be more on Web sites hosted and by creating Application Pool, you can just assign a Separate Worker Process to your application. I have already discussed how you can assign Application Pool to your web application.
There are two predefined Application Pools is IIS 7.0:
None of the Application Pools are Installed by default when IIS 7.0 is installed. Classic Application Pool is installed when ASP.NET 2.0 is installed in the System.
Application pool identity configuration is an important aspect of security in IIS 7.0, because it determines the identity of the worker process when the process is accessing resource. This Settings comes form IIS 6.0. in IIS 5.0. There the Application pool runs under the local system account. In IIS 7.0, there are three predefined Identities that are the same as IIS 6.0
LocalSystem is a built-in account that has
administrative privileges on the server. It can access both local and remote resources
LocalServices built-in account has privileges of an authenticated local user account. It does not have any network access permission.
|This is the default Identity of Application Pool.
NetworkServices has privileges of authenticated local user account and it can have access remote resource as machine account.
This has already been discussed.
Creating Application Pool and Assigning it to a Web Application
By default each Application Pool runs with a Single Worker Process (W3Wp.exe). We can assign multiple Worker Processes With a Single Application Pool. An Application Poll with multiple Worker process is called "Web Gardens". Many worker processes with the same Application Pool can sometimes provide better throughput performance and application response time. And each worker process should have their own Thread and Own Memory space.
Fig: General Block Diagram of Web Garden.
As given in the picture, in IIS Server there may be multiple Applicationpool and each application pool has at least a single Worker Process. Web Garden should contain multiple Worker processes.
There are certain restrictions to use Web Garden with your web application. If we use Session Mode to "in proc", our application will not work correctly because session will be handled by different Worker Process. To avoid this type of problem, we should have to use Session Mode "out proc" and we can use "Session State Server" or "SQL-Server Session State".
Main Advantage: The worker processes in a Web garden shares the requests that arrive for that particular application pool. If a worker process fails, another worker process can continue to process requests.
Create a New Application Pool. Right Click -> Advance Setting -> Go To Process Model Section, set the Value for Maximum Worker Process.
It not always recommended to use Web Garden to your Application. It effects the performance of your sites except in very specific cases like some long running synchronous requests or application is very unstable.
The main advantages of IIS 7.0 is Modular Design which gives some benefits to IIS 7.0 over IIS 6.0. The following table shows you some differences of IIS 6.0 and IIS 7.0.
||Most Features Installed
||Minimum installation based on role
||ISAPI Filter and ISAPI Extension
||Added Module and handler in managed or native code
||Customize for .NET
There are many more differences.
IIS 7.0 will not be available with all Operating Systems. There are some specific OS and specific Versions for IIS 7.0.
|Operating System With Edition
|Windows Server 2008
|Windows Vista (Home Basic)
||No (Default) need to install
|Windows Vista (Home Premium)
||No (Default) need to install
|Windows Vista (Business)
|Windows Vista (Ultimate)
- Added Section: Web Garden on IIS 7.0
- Modified some text