Go to top

# FFT Guitar Tuner

, 10 Aug 2010
 Rate this:
Using a Fast Fourier Transform to calculate the fundamental frequency of the captured audio sound

## Introduction

This article shows how to use a Fast Fourier Transform (FFT) algorithm to calculate the fundamental frequency of a captured audio sound. Also, we will see how to apply the algorithm to analyze live sound to build a simple guitar tuner: the code provides a solution to the problem of calculation of the fundamental frequency of the played pitch.

## Background

The computer can capture live sound/music using a microphone that is connected to the sound card. Modern sound cards can capture digital signals. A digital signal is a set of quantized sound values that were taken in uniformly spaced times. The digital signal does not provide any information about frequencies that are present in the sound. To determine that, the data need to be analyzed.

The Short-Time Fourier Transform (STFT) makes representation of the phase and magnitude of the signal. The result of the STFT can be used to produce the spectrogram of the signal: the magnitude squared over time and frequencies. We will use a Fast Fourier Transform (FFT) to generate the spectrogram of the signal of short periods of time. After the spectrogram is calculated, the fundamental frequency can be determined by finding the index of the maximum value of the magnitude squared. The improved algorithm finds several such places, candidate frequency bins, with the magnitude squared in the top of the maximum values, and further analyzes them to verify the candidate fundamental frequencies by using the signal data.

When a note is played on a musical instrument, the sound waves are generated by strings, air, or the speaker - an instrument generates a musical note. One of the characteristics of a musical note is a pitch (fundamental frequency). Traditionally musical alphabet frequencies are divided by octaves, and then by semitones. An octave has 12 named pitches: C (prime), C#, D, D#, E, F, F#, G, G#, A, A#, and B. Octaves also have names: great, small, one-lined, two-lined, etc. The "standard pitch" (A one-lined or A4) has a fundamental frequency of its sound waves equals to 440 Hz. The frequencies of two neighboring notes are different by 21/12, and frequencies of the notes with the same name in two neighboring octaves are different by 2.

Table: Notes and Their Fundamental Frequencies
Note Name Traditional Octave Names (Scientific), Hz
Great (2) Small (3) One-lined (4) Two-lined (5)
C 65.4064 130.8128 261.6256 523.2511
C# 69.2957 138.5913 277.1826 554.3653
D 73.4162 146.8324 293.6648 587.3295
D# 77.7817 155.5635 311.1270 622.2540
E 82.4069 164.8138 329.6276 659.2551
F 87.3071 174.6141 349.2282 698.4565
F# 92.4986 184.9972 369.9944 739.9888
G 97.9989 195.9977 391.9954 783.9909
G# 103.8262 207.6523 415.3047 830.6094
A 110.0000 220.0000 440.0000 880.0000
A# 116.5409 233.0819 466.1638 932.3275
B 123.4708 246.9417 493.8833 987.7666

The typical (six string) guitar normally plays pitches of great through two-lined octaves. The pitches of the open strings (E2, A2, D3, G3, B3, and E4) are selected in the table in bold.

## Using the Code

The solution contains three projects: the main windows application (FftGuitarTuner), the sound analysis library (SoundAnalysis), and the sound capture library (SoundCapture). The heart of the solution and the SoundAnalysis project is the FFT algorithm (see the `Calculate` method of the `SoundAnalysis.FftAlgorithm` class):

```// bit reversal
ComplexNumber[] data = new ComplexNumber[length];
for (int i = 0; i < x.Length; i++)
{
int j = ReverseBits(i, bitsInLength);
data[j] = new ComplexNumber(x[i]);
}

// Cooley-Tukey
for (int i = 0; i < bitsInLength; i++)
{
int m = 1 << i;
int n = m * 2;
double alpha = -(2 * Math.PI / n);

for (int k = 0; k < m; k++)
{
// e^(-2*pi/N*k)
ComplexNumber oddPartMultiplier =
new ComplexNumber(0, alpha * k).PoweredE();

for (int j = k; j < length; j += n)
{
ComplexNumber evenPart = data[j];
ComplexNumber oddPart = oddPartMultiplier * data[j + m];
data[j] = evenPart + oddPart;
data[j + m] = evenPart - oddPart;
}
}
}

// calculate spectrogram
double[] spectrogram = new double[length];
for (int i = 0; i < spectrogram.Length; i++)
{
spectrogram[i] = data[i].AbsPower2();
}```

The data for the algorithm is provided from the sound card capture buffer. The abstract `SoundCapture.SoundCaptureBase` utility class is an adapter for DirectSound's `Capture` and `CaptureBuffer` classes, that helps to encapsulate buffering and setting up the audio format parameters. The application requires Microsoft DirectX 9 runtime components for the live sound capture from the microphone.

Figure: Main Application Form

After the application is started, select the sound device and play a note. The application will capture the live sound and will calculate the current fundamental frequency of the signal. The information can be used to tune the guitar.

## Points of Interest

To calculate the Fast Fourier Transform, the Cooley-Tukey algorithm was used. It gives good performance for the required task. To challenge the algorithm, the application analyses about 22,000 sample blocks in real time: the sound is captured at a 44,100 Hz rate and a 16 bits sample size, and the analysis is performed twice a second.

The sound analysis library can be used for tone, background noise, sound, or speech detection. Series of the spectrogram of the continued sound can be displayed as a 2D (or 3D) image to present it visually.

## History

• 1st January, 2009: Initial version
• 2nd January, 2009: Added algorithm code snippet
• 3rd August, 2010: Corrected article typos; new frequency detection algorithm

## Share

Software Developer
United States
No Biography provided

## You may also be interested in...

### IDC: The Intelligent Integrated Enterprise

 Is it easy to convert to VB. Net? TheJediMaster 30-Jun-11 5:23
 Re: Is it easy to convert to VB. Net? notmasteryet 30-Jun-11 14:25
 Re: Is it easy to convert to VB. Net? TheJediMaster 30-Jun-11 14:26
 ReverseBits function optimization Kvanttt 15-May-11 3:37
 System sound Pareen Vatani 10-May-11 20:53
 My vote of 5 P1l19r1m 8-May-11 0:11
 Nice solution thanks for providing it and a ? Alasdair Macleod 22-Jan-11 11:24
 My vote of 5 Joel Ivory Johnson 10-Aug-10 17:04
 How do you compare fundamental frequencies? marluv 23-Jul-10 4:04
 Re: How do you compare fundamental frequencies? notmasteryet 8-Aug-10 14:23
 Octave Problem John Parse 13-Jul-10 20:55
 Re: Octave Problem notmasteryet 8-Aug-10 14:37
 Cooley-Tukey PKultimPK 28-Jun-10 4:32
 Re: Cooley-Tukey notmasteryet 8-Aug-10 16:26
 C# to VB peter87 9-Jun-10 22:12
 Re: C# to VB notmasteryet 9-Aug-10 13:14
 Violin Zee-J 20-Apr-10 18:37
 Re: Violin notmasteryet 21-Apr-10 17:23
 Re: Violin Zee-J 21-Apr-10 19:51
 Re: Violin 5thWheel 7-Sep-10 22:45
 Vb.net Krio88 9-Apr-10 3:15
 Re: Vb.net peter87 9-Jun-10 22:16
 How do I FFT only part of spectrum? Bengt Thulin 23-Mar-10 6:49
 How to determine how long a note is held for? me8meme9me 13-Mar-10 4:43
 how about in VB.net? peter87 11-Mar-10 23:57
 Re: how about in VB.net? me8meme9me 13-Mar-10 4:59
 language bintangtan 7-Mar-10 18:01
 USB Input ? wijays@gmail.com 4-Feb-10 9:52
 msg problem: is not a win32 valid application angelo carlt 6-Jan-10 6:35
 Re: msg problem: is not a win32 valid application notmasteryet 6-Jan-10 16:25
 Re: msg problem: is not a win32 valid application angelo carlt 7-Jan-10 12:03
 Re: msg problem: is not a win32 valid application daylightdj 17-Mar-10 1:26
 Re: msg problem: is not a win32 valid application angelo carlt 17-Mar-10 17:20
 Re: msg problem: is not a win32 valid application daylightdj 24-Mar-10 1:35
 pls help me. . . clareese 6-Jan-10 1:34
 Re: pls help me. . . notmasteryet 6-Jan-10 16:20
 Re: pls help me. . . proximity3 3-Jul-10 2:44
 high strings tuned rifffff 1-Sep-09 4:35
 Nice Job!! [modified] EricZ1 21-Jul-09 22:27
 Very usefull mofo101 13-Jul-09 18:11
 Re: Very usefull notmasteryet 14-Jul-09 17:31
 Inverse transform rafaelverisys 7-Jul-09 5:27
 Last Visit: 31-Dec-99 18:00     Last Update: 18-Sep-14 11:18 Refresh « Prev123 Next »