Go to top

# FFT Guitar Tuner

, 10 Aug 2010
 Rate this:
Using a Fast Fourier Transform to calculate the fundamental frequency of the captured audio sound

## Introduction

This article shows how to use a Fast Fourier Transform (FFT) algorithm to calculate the fundamental frequency of a captured audio sound. Also, we will see how to apply the algorithm to analyze live sound to build a simple guitar tuner: the code provides a solution to the problem of calculation of the fundamental frequency of the played pitch.

## Background

The computer can capture live sound/music using a microphone that is connected to the sound card. Modern sound cards can capture digital signals. A digital signal is a set of quantized sound values that were taken in uniformly spaced times. The digital signal does not provide any information about frequencies that are present in the sound. To determine that, the data need to be analyzed.

The Short-Time Fourier Transform (STFT) makes representation of the phase and magnitude of the signal. The result of the STFT can be used to produce the spectrogram of the signal: the magnitude squared over time and frequencies. We will use a Fast Fourier Transform (FFT) to generate the spectrogram of the signal of short periods of time. After the spectrogram is calculated, the fundamental frequency can be determined by finding the index of the maximum value of the magnitude squared. The improved algorithm finds several such places, candidate frequency bins, with the magnitude squared in the top of the maximum values, and further analyzes them to verify the candidate fundamental frequencies by using the signal data.

When a note is played on a musical instrument, the sound waves are generated by strings, air, or the speaker - an instrument generates a musical note. One of the characteristics of a musical note is a pitch (fundamental frequency). Traditionally musical alphabet frequencies are divided by octaves, and then by semitones. An octave has 12 named pitches: C (prime), C#, D, D#, E, F, F#, G, G#, A, A#, and B. Octaves also have names: great, small, one-lined, two-lined, etc. The "standard pitch" (A one-lined or A4) has a fundamental frequency of its sound waves equals to 440 Hz. The frequencies of two neighboring notes are different by 21/12, and frequencies of the notes with the same name in two neighboring octaves are different by 2.

Table: Notes and Their Fundamental Frequencies
Note Name Traditional Octave Names (Scientific), Hz
Great (2) Small (3) One-lined (4) Two-lined (5)
C 65.4064 130.8128 261.6256 523.2511
C# 69.2957 138.5913 277.1826 554.3653
D 73.4162 146.8324 293.6648 587.3295
D# 77.7817 155.5635 311.1270 622.2540
E 82.4069 164.8138 329.6276 659.2551
F 87.3071 174.6141 349.2282 698.4565
F# 92.4986 184.9972 369.9944 739.9888
G 97.9989 195.9977 391.9954 783.9909
G# 103.8262 207.6523 415.3047 830.6094
A 110.0000 220.0000 440.0000 880.0000
A# 116.5409 233.0819 466.1638 932.3275
B 123.4708 246.9417 493.8833 987.7666

The typical (six string) guitar normally plays pitches of great through two-lined octaves. The pitches of the open strings (E2, A2, D3, G3, B3, and E4) are selected in the table in bold.

## Using the Code

The solution contains three projects: the main windows application (FftGuitarTuner), the sound analysis library (SoundAnalysis), and the sound capture library (SoundCapture). The heart of the solution and the SoundAnalysis project is the FFT algorithm (see the `Calculate` method of the `SoundAnalysis.FftAlgorithm` class):

```// bit reversal
ComplexNumber[] data = new ComplexNumber[length];
for (int i = 0; i < x.Length; i++)
{
int j = ReverseBits(i, bitsInLength);
data[j] = new ComplexNumber(x[i]);
}

// Cooley-Tukey
for (int i = 0; i < bitsInLength; i++)
{
int m = 1 << i;
int n = m * 2;
double alpha = -(2 * Math.PI / n);

for (int k = 0; k < m; k++)
{
// e^(-2*pi/N*k)
ComplexNumber oddPartMultiplier =
new ComplexNumber(0, alpha * k).PoweredE();

for (int j = k; j < length; j += n)
{
ComplexNumber evenPart = data[j];
ComplexNumber oddPart = oddPartMultiplier * data[j + m];
data[j] = evenPart + oddPart;
data[j + m] = evenPart - oddPart;
}
}
}

// calculate spectrogram
double[] spectrogram = new double[length];
for (int i = 0; i < spectrogram.Length; i++)
{
spectrogram[i] = data[i].AbsPower2();
}```

The data for the algorithm is provided from the sound card capture buffer. The abstract `SoundCapture.SoundCaptureBase` utility class is an adapter for DirectSound's `Capture` and `CaptureBuffer` classes, that helps to encapsulate buffering and setting up the audio format parameters. The application requires Microsoft DirectX 9 runtime components for the live sound capture from the microphone.

Figure: Main Application Form

After the application is started, select the sound device and play a note. The application will capture the live sound and will calculate the current fundamental frequency of the signal. The information can be used to tune the guitar.

## Points of Interest

To calculate the Fast Fourier Transform, the Cooley-Tukey algorithm was used. It gives good performance for the required task. To challenge the algorithm, the application analyses about 22,000 sample blocks in real time: the sound is captured at a 44,100 Hz rate and a 16 bits sample size, and the analysis is performed twice a second.

The sound analysis library can be used for tone, background noise, sound, or speech detection. Series of the spectrogram of the continued sound can be displayed as a 2D (or 3D) image to present it visually.

## History

• 1st January, 2009: Initial version
• 2nd January, 2009: Added algorithm code snippet
• 3rd August, 2010: Corrected article typos; new frequency detection algorithm

## Share

Software Developer
United States
No Biography provided

## You may also be interested in...

### Is an Open Source BPM Solution Right For You?

 First PrevNext
 Project within a project Member 10531399 26-Apr-14 6:07
 My vote of 1 Fabrizio Stellato 12-Jan-14 3:28
 How hard it would be to redo this project for java ? YuriyKravets 25-Nov-13 6:00
 Got it working on XP x64 under .NET 4.0 [modified] bmac 20-Jul-13 5:54
 My vote of 4 saddam Escape 2-Apr-13 10:51
 My vote of 5 Abdullatif M. Abu Al Rub 2-Mar-13 0:31
 My vote of 5 vard99 12-Jan-13 13:06
 Building as 4.0 theney 11-Dec-12 7:04
 Re: Building as 4.0 Member 8692367 31-Jan-13 8:52
 Re: Building as 4.0 bmac 20-Jul-13 5:58
 Problem with Fft Algorithm Member 9639037 29-Nov-12 1:14
 ? Windows 7 rspercy65 28-Nov-12 4:19
 Re: ? Windows 7 lalitsrana 3-Jan-13 20:46
 Re: ? Windows 7 Member 8692367 31-Jan-13 8:41
 Re: ? Windows 7 bmac 20-Jul-13 5:58
 Not working as expected ZeAleks 24-May-12 9:39
 My vote of 1 vartika sharma 25-Apr-12 2:23
 not working and converting to rpm torchie 20-Nov-11 8:06
 cannot see microphone no matter what ibradleyallen 19-Nov-11 18:22
 Re: cannot see microphone no matter what bmac 20-Jul-13 5:59
 I have an external sound card (M-Audio Fast Track Pro). In line 1 I connected a microphone. In line 2 I plugged a guitar. I can change the audio source by changing the value of the variable ChannelCount for 1 or 2. If I want to capture audio from microphone, I change the value to 1, and if I want to capture the sound of the guitar so I change the value to 2. But something strange happens: If ChannelCount has the value 2, the note that is displayed by the program is an octave below that is displayed if the ChannelCount is 1. Why is this happening? I need to change something in the code?   Thank you for your attention.
 My vote of 5 AMCode 26-Sep-11 3:33
 How to get the sound of line 2? TheJediMaster 27-Jul-11 5:36
 just one more thing TheJediMaster 14-Jul-11 14:12
 Re: just one more thing notmasteryet 14-Jul-11 14:57
 Re: just one more thing TheJediMaster 14-Jul-11 15:24
 What about win7 amersaw 10-Jul-11 14:42
 Re: What about win7 TheJediMaster 11-Jul-11 10:44
 Re: What about win7 bmac 20-Jul-13 6:02
 "frequencyTextBox" update TheJediMaster 8-Jul-11 1:09
 Re: "frequencyTextBox" update TheJediMaster 12-Jul-11 12:42
 Re: "frequencyTextBox" update notmasteryet 12-Jul-11 15:00
 I made some changes: Voice tuner TheJediMaster 7-Jul-11 8:17
 Fundamental frequency algoritm Kvanttt 1-Jul-11 8:46
 Last Visit: 31-Dec-99 18:00     Last Update: 1-Oct-14 6:21 Refresh 123 Next »