Click here to Skip to main content
Click here to Skip to main content
Go to top

Build a Silverlight 2 Web Chat Application

, 12 Feb 2009
Rate this:
Please Sign up or sign in to vote.
We are going to build a simple web chat application using Silverlight 2 and the technologies surrounding it like, ASP.NET 3.5, C#, WCF, and LINQ-to-SQL. We will use MS SQL Server to store user details and messages from this chat room.

Introduction

Silverlight 2 is finally out, and I'm thinking the best way to learn it is to build a small web application using this wonderful technology. And, that's exactly what we're going to do here. We're going to build a Web Chat using Silverlight 2. I'm also going to share some of the things I found out/learned about this new technology. Here's a snapshot of the Silverlight 2 Web Chat application that we're going to build.

Requirements

We will create a very simple web chat application using Silverlight 2 from scratch, just for fun. This chat application will contain two XAML user controls: the login control and the chat room control. Most of the tutorial will be focused on the chat room page. Some of the things that I want to accomplish are:

  • Must be accessible anywhere, and without the need to download and install any components. This is why we're going to create a web chat.
  • The web chat must be "flicker-free". You'll find out that all processing in Silverlight is done asynchronously.
  • We want to be able to monitor chat conversations using a database. We will use MS SQL Server to store conversations and user information.
  • Use of dynamic SQL using LINQ-to-SQL instead of Stored Procedures, for super fast coding.

The Fun Begins

  1. First, we need to build our database using MS SQL Server 2005/2008. For simplicity, we will go ahead and use this database:
    • User: Contains user information. Feel free to add your own fields like address, city, and so on.
    • Message: Will hold the messages sent by the users while chatting.
    • Room: Contains information about different rooms. This means that you can have more than one room. But for the purposes of this tutorial, we will only use one room for now.
    • LoggedInUsers: Will hold the users logged-in/chatting in the chatroom(s). In short, if a user enters a room, we will save their information here; this way, we can show the list of users chatting in a specific room.
  2. In Visual Studio, create a new Silverlight Application project. You can do this by going to the File menu, selecting New, then clicking Project. In the New Project box, click Silverlight under the Project Types, then choose Silverlight Application under Templates, type in a name for this application. Then, click OK.
  3. On the next window, choose "Add a new ASP.NET Web Project...." and then click OK. In the Solution Explorer, you will notice that a Silverlight application and an ASP.NET Web Project were created. We will use the generated web project to host our Silverlight 2 chat application.

  4. Let me talk about some of the things that were generated when we created this Silverlight application. In the Silverlight application, you will notice that there are two XAML files, App.xaml and Page.xaml. XAML files, unlike ASP.NET WebForms, are user controls that need to be hosted in an ASP.NET WebForm or an HTML page. All XAML files, by default, can be hosted in a single web page. Of course, you can also host a XAML file/user control per web page, which I don't recommend.
    • App.xaml: Works kind-of-like the Global.asax in ASP.NET. This is the very first control that is hit by a Silverlight application. Since Silverlight is a client-side technology, it does not have Sessions, nor can you do Response.Redirect to the next user control. This is where we can store the variables/properties that have to be available to other user controls. Of course, this is only possible if you're hosting the other user controls in the same ASP.NET page.
    • Page.xaml: By default, without changing any code, this is the user control that the generated ASP.NET web page will be hosting when you create your project. For the purposes of this tutorial, we will not use this user control. We will instead create our own and name it in accordance to the usage.

    In the web application side, you will also notice the following files:

    • Default.aspx: This file is not used at all. So we will delete it in our project.
    • Chatroom.aspx: This is the actual page that will be hosting our Silverlight user control in. You can set this as your start page. You will also notice that this file references a ".xap" file which is located in the ClientBin folder. When you look in the ClientBin folder, there's no .xap file when you first create your project. Build your web project, the .xap will now be under the ClientBin folder. The generated .xap file is the compiled Silverlight application.
    • Silverlight2ChatTestPage.html: Silverlight error page catcher. When a Silverlight error occurs, this page is shown as a pop up.

    Here's a snapshot of the Silverlight 2 chat project:

    Now that you're familiar with a Silverlight application being hosted in an ASP.NET web page, we will move on to the web chat tutorial.

  5. I created two user controls: Login.xaml and Chatroom.xaml, mainly so that I can show you how to move from one user control to next, and vice versa. I also wanted to show how to remember a user between user controls, somewhat like a Session effect. Simple enough, you probably would have already guessed that these user controls are used to login and chat, respectively.
  6. You need to login before you can start chatting. Users must exist in your LinqChat User table. A room must also exist in the LinqChat Room table. This room must have a RoomID = 1, I hard-coded this in Chatroom.xaml.cs. Of course, you can have more than one room, but for the purposes of this tutorial, we only need one.

The XAML User Controls

In Silverlight 2, there are three basic XAML container controls; the Canvas, StackPanel, and the Grid control. In this project, we will be using the Grid and the StackPanel controls. The Grid works like an HTML table; rather than using TR for rows and TD for columns, it uses RowDefinitions and ColumnDefinitions, respectively. The StackPanel can hold other XAML controls in a stack, either horizontally or vertically. For more information on these controls please, visit the Silverlight website at http://www.silverlight.net.

Login.xaml

Shown below is the XAML UI code that generates the simple login UI shown above. You will notice that all the XAML controls are contained in a Grid control. The positioning of the controls is very much self explanatory when you look at the green comments that I put there. There are a few things that I want to point out:

  1. The error message controls are all "hidden", marked as Visibility="Collapsed". We control the visibility of these error messages in the code-behind.
  2. To mimic the ASP.NET validator controls, I added the LostFocus and MouseEnter events in the User Name and Password controls.
<UserControl x:Class="Silverlight2Chat.Login"
    xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" 
    xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" 
    Width="510" Height="118">
    <Grid x:Name="LayoutRoot" Background="White" ShowGridLines="False">
        <Grid.RowDefinitions>
            <RowDefinition Height="10" />       <!-- padding -->
            <RowDefinition Height="26" />       <!-- username -->
            <RowDefinition Height="6" />        <!-- padding -->
            <RowDefinition Height="26" />       <!-- password -->
            <RowDefinition Height="10" />       <!-- padding -->
            <RowDefinition Height="30" />       <!-- button -->
            <RowDefinition Height="6" />        <!-- padding -->
        </Grid.RowDefinitions>

        <Grid.ColumnDefinitions>
            <ColumnDefinition Width="10" />     <!-- padding -->
            <ColumnDefinition Width="80" />     <!-- labels -->
            <ColumnDefinition Width="10" />     <!-- padding -->
            <ColumnDefinition Width="200" />    <!-- controls -->
            <ColumnDefinition Width="10" />     <!-- padding -->
            <ColumnDefinition Width="*" />      <!-- error messages -->
            <ColumnDefinition Width="10" />     <!-- padding -->
        </Grid.ColumnDefinitions>

        <!-- labels -->
        <TextBlock Text="User Name:" Grid.Row="1" 
          Grid.Column="1" FontSize="12" 
          VerticalAlignment="Center" />
        <TextBlock Text="Password:" Grid.Row="3" 
          Grid.Column="1" FontSize="12" 
          VerticalAlignment="Center" />

        <!-- controls -->
        <TextBox x:Name="TxtUserName" Grid.Row="1" 
           Grid.Column="3" FontSize="12" BorderThickness="2" 
           LostFocus="TxtUserName_LostFocus" MouseEnter="TxtUserName_MouseEnter" />

        <PasswordBox x:Name="PbxPassword" Grid.Row="3" 
            Grid.Column="3" FontSize="12" BorderThickness="2" 
            LostFocus="PbxPassword_LostFocus" 
            MouseEnter="PbxPassword_MouseEnter" />

        <Button x:Name="BtnLogin" Grid.Row="5" 
            Grid.Column="3" Content="Login" 
            FontSize="12" Click="BtnLogin_Click" />

        <!-- error messages -->
        <TextBlock x:Name="TxtbUserNameRequired" Text="User Name is Required!" 
           Foreground="Red" Grid.Row="1" Grid.Column="5" 
           FontSize="12" VerticalAlignment="Center" Visibility="Collapsed" />
 
        <TextBlock x:Name="TxtbPasswordRequired" 
           Text="Password is Required!" Foreground="Red" 
           Grid.Row="3" Grid.Column="5" FontSize="12" 
           VerticalAlignment="Center" Visibility="Collapsed" />
 
        <TextBlock x:Name="TxtbNotfound" Text="Invalid Username or Password!" 
           Foreground="Red" Grid.Row="5" Grid.Column="5" 
           FontSize="12" VerticalAlignment="Center" 
           Visibility="Collapsed" />
    </Grid>
</UserControl>

When the user clicks the Login button, a variable that tells us that the user already clicked the Login button at least once is set to true. This will help us validate the username or password control from the client-side using the LostFocus and MouseEnter events, without the need for the user to re-click the Login button, therefore mimicking the ASP.NET validation controls before we actually validate the username and password on the server.

24     private void BtnLogin_Click(object sender, RoutedEventArgs e)
25     {
26         _isLoginButtonClicked = true;
27         ValidateUserName();
28         ValidatePassword();
29 
30         if (!String.IsNullOrEmpty(TxtUserName.Text) && 
               !String.IsNullOrEmpty(PbxPassword.Password))
31         { 
32             // validate user based on the username and password
33             ValidateUser();
34         }
35     }

The ValidateUserName and ValidatePassword methods only check if the User Name and Password boxes are empty, then show or hide the error message accordingly.

49     private void ValidateUserName()
50     {
51         if (String.IsNullOrEmpty(TxtUserName.Text))
52             TxtbUserNameRequired.Visibility = Visibility.Visible;
53         else
54             TxtbUserNameRequired.Visibility = Visibility.Collapsed;
55     }
56 
57     private void ValidatePassword()
58     {
59         if (String.IsNullOrEmpty(PbxPassword.Password))
60             TxtbPasswordRequired.Visibility = Visibility.Visible;
61         else
62             TxtbPasswordRequired.Visibility = Visibility.Collapsed;
63     }

In the ValidateUser method, we're using a WCF (Windows Communication Foundation) service to validate the user name and password entered by the user. If the user is found in the database, the user is then redirected to the chat room XAML; if not, an error messages is shown. We will go back on this in a little bit, but first, let me talk about the WCF Service.

The Windows Communication Foundation (WCF) Service

Since Silverlight is a client-side technology, there are a few ways to handle database access, all of which use some kind of AJAX technology or JavaScript. I prefer using WCF over classic Web Service (.asmx) technology. To add a WCF Service, right-click on the web project, select Add New Item, then select "WCF Service", as shown below. When you click Add, three files are added to the web project: a ".svc" file, the respective code file ".svc.cs", and an interface file "I.....cs". An entry in the Web.config file is also inserted.

Interface

This interface file serves as a base interface for the WCF Service. This is where we define all the methods that the WCF service is going to implement. You will also notice that the interface is marked as a ServiceContract. Each one of the methods are marked as an OperationContract.

12     [ServiceContract]
13     public interface ILinqChatService
14     {
15         [OperationContract]
16         int UserExist(string username, string password);
17 
18         [OperationContract]
19         List<MessageContract> GetMessages(int messageID, int roomID, 
                                             DateTime timeUserJoined);
20 
21         [OperationContract]
22         void InsertMessage(int roomID, int userID, int? toUserID, 
                              string messageText, string color);
23 
24         [OperationContract]
25         List<UserContract> GetUsers(int roomID, int userID);
26 
27         [OperationContract]
28         void LogOutUser(int userID, int roomID, string username);
29     }

You will also notice that I created two public classes inside this interface. The classes simply define the properties of the respective DataContract. Also, you will notice that the data members of the MessageContract class directly maps to the Message table, and the UserContract class data members directly map to the User table in the database. Note: I only added the data members we will be using for the purposes of this tutorial. Also, because I was a bit a lazy when I did this, I embedded these two classes inside the interface; I could have easily made two separate public classes, instead.

31     [DataContract]
32     public class MessageContract
33     {
34         [DataMember]
35         public int MessageID;
36 
37         [DataMember]
38         public string Text;
39 
40         [DataMember]
41         public string UserName;
42 
43         [DataMember]
44         public string Color;
45     }
46 
47     [DataContract]
48     public class UserContract
49     {
50         [DataMember]
51         public int UserID;
52 
53         [DataMember]
54         public string UserName;
55     }

Implementing the Interface in the LinqChatService

The interface is implemented in the WCF service code-behind file, "LinqChatService.svc.cs". To implement the interface, first, we need to inherit the interface as shown below. The inheritance is coded by default.

11     public class LinqChatService : ILinqChatService

Right-click on the interface "ILinqChatService", select Implement Interface, then select Implement Interface Explicitly, as shown below. This will generate the interface's members inside a region tag.

Interface Member Methods

Now that you know how to implement the members of an interface, we will now talk about the implementation of each of the member methods. Each of the member methods accesses the database through the use of LINQ-to-SQL. I also named each one of the methods sensibly enough based on their operation.

  • InsertMessage: We use this method to insert one message at a time to the database. This operation is called when a user types a message in the chat room and then hits the Send button.
  • 13     void ILinqChatService.InsertMessage(int roomID, int userID, 
                int? toUserID, string messageText, string color)
    14     {
    15         Message message = new Message();
    16         message.RoomID = roomID;
    17         message.UserID = userID;
    18         message.ToUserID = toUserID;
    19         message.Text = messageText;
    20         message.Color = color;
    21         message.TimeStamp = DateTime.Now;
    22 
    23         LinqChatDataContext db = new LinqChatDataContext();
    24         db.Messages.InsertOnSubmit(message);
    25 
    26         try
    27         {
    28             db.SubmitChanges();
    29         }
    30         catch (Exception)
    31         {
    32             throw;
    33         }
    34     }
  • GetMessages: We use this method to get the messages for a specific room from the time the logged-in user joined the room. This only gets the messages that have not been retrieved yet; this is the reason why we're passing the messageID of the last message that we retrieved from the previous calls on this method. The code timeUserJoined.AddSeconds(1) highlighted below limits the messages to those recieved one second past the the time the logged-in user joined the room. This is because, when a user joins the room, a message is inserted in the database saying "user joined the room". All the other chatters will see this message, except the logged-in user.
  • Another thing to note is the foreach loop. The first thing that comes to mind is: why can't we just return a Generic list of type List<Message>? The interface does not understand complex types unless defined explicitly as a DataContract. This is the reason why we created an almost exact copy of the Message table members and explicitly defined it as a MessageContract class, where each member of the DataContract is a DataMember.

    36     List<MessageContract> ILinqChatService.GetMessages(int messageID, 
                                 int roomID, DateTime timeUserJoined)
    37     {
    38         LinqChatDataContext db = new LinqChatDataContext();
    39 
    40         var messages = (from m in db.Messages
    41                         where m.RoomID == roomID &&
    42                         m.MessageID > messageID &&
    43                         m.TimeStamp > timeUserJoined.AddSeconds(1)
    44                         orderby m.TimeStamp ascending
    45                         select new { m.MessageID, m.Text, m.User.Username, 
                                            m.TimeStamp, m.Color });
    46 
    47         List<MessageContract> messageContracts = new List<MessageContract>();
    48 
    49         foreach (var message in messages)
    50         {
    51             MessageContract messageContract = new MessageContract();
    52             messageContract.MessageID = message.MessageID;
    53             messageContract.Text = message.Text;
    54             messageContract.UserName = message.Username;
    55             messageContract.Color = message.Color;
    56             messageContracts.Add(messageContract);
    57         }
    58 
    59         return messageContracts;
    60     }
  • GetUsers: This method gets all the users in a specific room. First, it checks if the logged-in user is in the LoggedInUser table; if not, the user is inserted (line 75-82). The reason for this check is because I streamlined the inserting of the new user; when the user first enters the chat room he/she is inserted into the LoggedInUser table. Every other call to get users just retrieves all the users from the database.
  • Just like the GetMessages method, we're assigning all the retrieved users to the UserContract Data Contract class (line 92-97).

    62     List<UserContract> ILinqChatService.GetUsers(int roomID, int userID)
    63     {
    64         LinqChatDataContext db = new LinqChatDataContext();
    65 
    66         // let's check if this authenticated user exist in the
    67         // LoggedInUser table (means user is logged-in to this room)
    68         var user = (from u in db.LoggedInUsers
    69                     where u.UserID == userID
    70                     && u.RoomID == roomID
    71                     select u).SingleOrDefault();
    72 
    73         // if user does not exist in the LoggedInUser table
    74         // then let's add/insert the user to the table
    75         if (user == null)
    76         {
    77             LoggedInUser loggedInUser = new LoggedInUser();
    78             loggedInUser.UserID = userID;
    79             loggedInUser.RoomID = roomID;
    80             db.LoggedInUsers.InsertOnSubmit(loggedInUser);
    81             db.SubmitChanges();
    82         }
    83 
    84         // get all logged in users to this room
    85         var loggedInUsers = from l in db.LoggedInUsers
    86                             where l.RoomID == roomID
    87                             orderby l.User.Username ascending
    88                             select new { l.User.Username };
    89 
    90         List<UserContract> userContracts = new List<UserContract>();
    91 
    92         foreach (var loggedInUser in loggedInUsers)
    93         {
    94             UserContract userContract = new UserContract();
    95             userContract.UserName = loggedInUser.Username;
    96             userContracts.Add(userContract);
    97         }
    98 
    99         return userContracts;
    100     }
  • UserExist: Checks if a user exists. If the user exists, it returns the user ID; if not it returns -1. This method is called from the Login.xaml code-behind file to check if the username and password entered by the user exist in the database. Why am I returning the user ID, and why just the user ID? From the time the user logs in, the application remembers the user ID and user name of that user, much like a Session effect. To minimize the data retrieved, all we really need at this point is the user ID, since the user name was already provided through the username textbox from the login page.
  • 102     int ILinqChatService.UserExist(string username, string password)
    103     {
    104         int userID = -1;
    105 
    106         LinqChatDataContext db = new LinqChatDataContext();
    107 
    108         var user = (from u in db.Users
    109                     where u.Username == username
    110                     && u.Password == password
    111                     select new { u.UserID }).SingleOrDefault();
    112 
    113         if (user != null)
    114             userID = user.UserID;
    115 
    116         return userID;
    117     }
  • LogOutUser: Simple, logs out the user. Lines 124-130 delete the user from the LoggedInUser table. Lines 133-142 insert a message in the Message table saying that the user left the room so that the other users can see this message when a user logs out. Again, I streamlined the database access; rather than doing another query based on the user ID to get the username of the user that is logging out, this method expects the username as highlighted below. This is the reason why we're remembering the user name of the current user logged in to this chat room. I'll talk about how this is done in a bit. This method is called when you click the Logout button in the Chatroom.xaml UI.
  • Note: You can also easily log out a user when the user clicks the close button of a browser, by catching the onunload event of the body tag.

    119     void ILinqChatService.LogOutUser(int userID, int roomID, string username)
    120     {
    121         // log out the user by deleting from the LoggedInUser table
    122         LinqChatDataContext db = new LinqChatDataContext();
    123 
    124         var loggedInUser = (from l in db.LoggedInUsers
    125                             where l.UserID == userID
    126                             && l.RoomID == roomID
    127                             select l).SingleOrDefault();
    128 
    129         db.LoggedInUsers.DeleteOnSubmit(loggedInUser);
    130         db.SubmitChanges();
    131 
    132         // insert user "left the room" text
    133         Message message = new Message();
    134         message.RoomID = roomID;
    135         message.UserID = userID;
    136         message.ToUserID = null;
    137         message.Text = username + " left the room.";
    138         message.Color = "Gray";
    139         message.TimeStamp = DateTime.Now;
    140 
    141         db.Messages.InsertOnSubmit(message);
    142         db.SubmitChanges();
    143     }

Web.config and WCF

When we added a WCF Service to our web application, a few lines of code was also automatically added to the Web.config file in the system.ServiceModel tag. Although everything here is standardized, one thing I want to point out is the binding information in line 126. By default, it will be coded as "wsHttpBinding"; we need to change it to basicHttpBinding as shown and highlighted below:

109     <system.serviceModel>
110         <behaviors>
111             <endpointBehaviors>
112                 <behavior name="Silverlight2Chat.Web.Service1AspNetAjaxBehavior">
113                     <enableWebScript />
114                 </behavior>
115             </endpointBehaviors>
116             <serviceBehaviors>
117                 <behavior name="Silverlight2Chat.Web.LinqChatServiceBehavior">
118                     <serviceMetadata httpGetEnabled="true" />
119                     <serviceDebug includeExceptionDetailInFaults="false" />
120                 </behavior>
121             </serviceBehaviors>
122         </behaviors>
123         <services>
124             <service behaviorConfiguration="Silverlight2Chat.Web.LinqChatServiceBehavior"
125                 name="Silverlight2Chat.Web.LinqChatService">
126                 <endpoint address="" binding="basicHttpBinding" 
                              contract="Silverlight2Chat.Web.ILinqChatService">
127                     <identity>
128                         <dns value="localhost" />
129                     </identity>
130                 </endpoint>
131                 <endpoint address="mex" binding="mexHttpBinding" 
                                      contract="IMetadataExchange" />
132             </service>
133         </services>
134     </system.serviceModel>

Remembering Information and Moving from One XAML User Control to the Next

As I mentioned earlier, Silverlight is a client-side technology. This means that we cannot use Session objects to remember things, nor can we use the famous Response.Redirect command to go to the next page/XAML user control. Although you can host one XAML file per ASP.NET WebForm, Silverlight is not designed this way, you should flip or move from one XAML file to the next hosted by the same ASP.NET WebForm or HTML page. By default, when you create a Silverlight application, a Page.xaml file is generated. This is also the default XAML user control that is used or hosted when you run your Silverlight application. We don't really need the Page user control, so I deleted it. Instead, I added two user controls: Login.xaml and Chatroom.xaml. We will be moving back and forth from the Login.xaml to the Chatroom.xaml and vice versa using the App.xaml web user control.

App.xaml is the Silverlight application-wide user control. This is where we can set-up which user control will be shown or called first in our application. This is also where we can remember things like the user ID and user name. It also works like the Web.config where you can store your application-wide resources.

  1. Setting Login.xaml as the default XAML user control: In the Application_Startup event of the App.xaml, simply change "Page()" to "Login()", as shown in line 32.
  2. 28     private void Application_Startup(object sender, StartupEventArgs e)
    29     {
    30         // start at the login page
    31         this.RootVisual = rootGrid;
    32         rootGrid.Children.Add(new Login());
    33     }
  3. To move from the Login.xaml user control to the Chatroom.xaml and vice versa, I created a method called RedirectTo in the App.xaml user control that accepts a User Control where we want to be redirected to. What we're doing here is removing the current user control and adding the user control that we want to show to the user. This method is called from the login XAML after a user logs in to the chat room, and from the chat room XAML when a user logs out. The code is shown below:
  4. 69     public void RedirectTo(UserControl usercontrol)
    70     {
    71         App app = (App)Application.Current;
    72         app.rootGrid.Children.Clear();
    73         app.rootGrid.Children.Add(usercontrol);
    74     }

    To redirect a user from Login.xaml to Chatroom.xaml, we do the following from the Login.xaml user control:

    81     App app = (App)Application.Current;
    82     app.UserID = userID;
    83     app.UserName = TxtUserName.Text;
    84     app.RedirectTo(new Chatroom());
  5. To remember a value from one XAML User Control to the next, we need to create a public property for each of the values that we want remembered from the App.xaml user control.
  6. 76     public int UserID { get; set; }
    77 
    78     public string UserName { get; set; }
    79 
    80     public DateTime TimeUserJoined { get; set; }

    Now that these properties are created, we simply need to assign the values we want remembered from either the Login.xaml or Chatroom.xaml. The code shown below is from Login.xaml.

    81     App app = (App)Application.Current;
    82     app.UserID = userID;

Chatroom.xaml UI

There are a few things that I want to point out about the chat room UI, and all of them are highlighted below. You will notice that both Messages and User List are using StackPanel controls, but the data bindings are different. User List uses the DataTemplate tag which is a lot simpler, and binds all the user names as hyperlinks. On the other hand, the messages are bound in the code-behind. This is because the messages need to show a more complex set of controls. As you have noticed in the snapshot of this chat room, the messages can be of different colors; the names and the messages right beside them don't need to have the same colors. I will discuss more on this in a little bit.

A KeyDown event for the message textbox (where the user types their messages) is also supplied so that we can check if the user hit the "Enter" key of the keyboard. When the user hits the Enter key, the message is sent. Again, I will talk more about this a bit later.

<UserControl x:Class="Silverlight2Chat.Chatroom"
    xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" 
    xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" 
    Width="600" Height="340">
    <Grid x:Name="LayoutRoot" Background="White" 
              ShowGridLines="False" Loaded="LayoutRoot_Loaded">
        <Grid.RowDefinitions>
            <RowDefinition Height="10" />       <!-- padding -->
            <RowDefinition Height="38" />       <!-- title -->
            <RowDefinition Height="10" />       <!-- padding -->
            <RowDefinition Height="*" />        <!-- messages, userlist -->
            <RowDefinition Height="10" />       <!-- padding -->       
            <RowDefinition Height="26" />       <!-- message text box, send button -->
            <RowDefinition Height="10" />       <!-- padding -->
        </Grid.RowDefinitions>
 
        <Grid.ColumnDefinitions>
            <ColumnDefinition Width="10" />     <!-- padding -->
            <ColumnDefinition Width="*" />      <!-- messages, message text box-->
            <ColumnDefinition Width="10" />     <!-- padding -->
            <ColumnDefinition Width="120" />    <!-- user list, send button-->
            <ColumnDefinition Width="10" />     <!-- padding -->
        </Grid.ColumnDefinitions>
 
        <TextBlock Text="Silverlight 2 Chat" Grid.Row="1" 
          Grid.Column="1" FontSize="22" Foreground="Navy" />
 
        <StackPanel Orientation="Vertical" Grid.Row="1" Grid.Column="3">
            <TextBlock x:Name="TxtbLoggedInUser" FontSize="10" 
               Foreground="Navy" FontWeight="Bold" HorizontalAlignment="Center" />
            <Button x:Name="BtnLogOut" Content="Log Out" 
              FontSize="10" Click="BtnLogOut_Click" />
        </StackPanel>
 
        <ScrollViewer x:Name="SvwrMessages" Grid.Row="3" Grid.Column="1" 
                      HorizontalScrollBarVisibility="Hidden" 
                      VerticalScrollBarVisibility="Visible" BorderThickness="2">
            <StackPanel x:Name="SpnlMessages" Orientation="Vertical" />
        </ScrollViewer>

        <ScrollViewer x:Name="SvwrUserList" Grid.Row="3" Grid.Column="3" 
                      HorizontalScrollBarVisibility="Auto" 
                      VerticalScrollBarVisibility="Auto" BorderThickness="2">
            <StackPanel x:Name="SpnlUserList" Orientation="Vertical">
                <ItemsControl x:Name="ItmcUserList">
                    <ItemsControl.ItemTemplate>
                        <DataTemplate>
                            <HyperlinkButton Content="{Binding UserName}" />
                        </DataTemplate>
                    </ItemsControl.ItemTemplate>
                </ItemsControl>   
            </StackPanel>
        </ScrollViewer>
 
        <StackPanel Orientation="Horizontal" Grid.Row="5" Grid.Column="1" >
            <TextBox x:Name="TxtMessage" TextWrapping="Wrap" 
                 KeyDown="TxtMessage_KeyDown"  
                 ScrollViewer.VerticalScrollBarVisibility="Visible" 
                 ScrollViewer.HorizontalScrollBarVisibility="Disabled"
                 Width="360"
                 BorderThickness="2" Margin="0,0,10,0"/>  
 
            <ComboBox x:Name="CbxFontColor" Width="80">
                <ComboBoxItem Content="Black" Foreground="White" 
                   Background="Black" IsSelected="True" />
                <ComboBoxItem Content="Red" Foreground="White" Background="Red" />
                <ComboBoxItem Content="Blue" Foreground="White" Background="Blue" />
            </ComboBox>
        </StackPanel>
 
        <Button x:Name="BtnSend" Content="Send" 
          Grid.Row="5" Grid.Column="3" Click="BtnSend_Click" />
    </Grid>
</UserControl>

Chatroom.xaml.cs Code-Behind

  1. When the user is redirected to the Chatroom.xaml user control from the Login.xaml user control, we check if the user is logged-in by checking any of the values we stored in App.xaml. I chose to check for the user name (line 34). If this value is empty, then the user has not logged-in yet, and therefore needs to be redirected to the login page (line 36).
  2. 32     App app = (App)Application.Current;
    33 
    34     if (String.IsNullOrEmpty(app.UserName))
    35     {
    36         app.RedirectTo(new Login());
    37     }
    38     else
    39     {
    40         _userID = app.UserID;
    41         _timeUserJoined = DateTime.Now;
    42         TxtbLoggedInUser.Text = app.UserName;
    43     }
  3. Since we're using a Grid named "LayoutRoot" as our root or main container for all the other controls, the LayoutRoot_Loaded event is called when the Grid is loaded. And yes, it mimics the Page_load event of an ASP.NET page.
  4. 46     private void LayoutRoot_Loaded(object sender, RoutedEventArgs e)
    47     {            
    48         TxtMessage.Focus();
    49         InsertNewlyJoinedMessage();
    50         GetUsers();
    51         SetTimer();
    52     }

    As you can see, a few things happen when the grid is loaded. One thing in particular that I want to discuss here is the focusing of the TxtMessage control, which is where you type your messages. The TxtMessage.Focus() command shown above in line 48 does not work by itself, there are a few things that we need to do to set the focus on this control when the grid is loaded.

    The first thing we need to do along with the TxtMessage.Focus() code is to put a focus on the Silverlight ASP.NET Control in the hosting web page, which is Chatroom.aspx. As shown below, we can focus on the Silverlight ASP.NET control using JavaScript.

    <html xmlns="http://www.w3.org/1999/xhtml" style="height:100%;">
    <head id="Head1" runat="server">
        <title>Silverlight 2 Chatroom</title>
        <script type="Text/javascript">
            window.onload = function ()
            {
                document.getElementById('Xaml1').focus();
            }
        </script>
    </head>
    
    <body style="height:100%;margin:0; padding:0; width: 100%;">
        <form id="form1" runat="server" style="height:100%;">
           <asp:ScriptManager ID="ScriptManager1" runat="server" />
            <asp:UpdatePanel ID="UpdatePanel1" runat="server">
                <ContentTemplate>
                    <div style="width: 100%; text-align:center; height: 100%;">
                        <asp:Silverlight ID="Xaml1" runat="server" 
                           Source="~/ClientBin/Silverlight2Chat.xap" 
                           MinimumVersion="2.0.31005.0" 
                           Width="600" Height="100%" />
                    </div>
                </ContentTemplate>
            </asp:UpdatePanel>
        </form>
    </body>
    </html>
  5. Using a proxy to access the WCF Service asynchronously: The following methods and/or events in the Chatroom.xaml.cs code-behind file all access the WCF Service that we created earlier:
    • InsertNewlyJoinedMessage()
    • GetUsers()
    • InsertMessage()
    • GetMessages()
    • BtnLogOut_Click

    Take note that all the processing done in a Silverlight application asynchronously. When you are trying to get values coming from a WCF Service into a Silverlight application, you will need to create a "Completed" event handler for the WCF proxy's Completed event as well as call the "Async" method of the WCF proxy. As an example, let's look at the GetUsers() method in Chatroom.xaml.cs.

    Line 57 and lines 61-68 are really not needed if you're not going to retrieve any value from the WCF Service, like when we insert a value in the database. However, in this case, we're retrieving users and assigning the retrieved values in Silverlight controls. For this example, when the GetUsersAsync call has been completed, the GetUsersCompleted event handler is called. The retrieved users (or retrieved value) are then assigned to the e.Result event arguments of the GetUserCompleted event handler. The e.Result return type is dynamic based on the value being retrieved. So, if we're just retrieving an integer value, then it will be an int type; if we're retrieving a string value, then it will be a string type, and so on. For this specific example, we're retrieving a collection, that's why were assigning it to an ObservableColletion type.

    Note that the GetUsersAsync method in line 58 has the same signature as the ILinqChatService.GetUsers method in the WCF Service; this is how we call the WCF Service method.

    54     private void GetUsers()
    55     {
    56         LinqChatReference.LinqChatServiceClient proxy = 
                           new LinqChatReference.LinqChatServiceClient();
    57         proxy.GetUsersCompleted += 
                  new EventHandler<Silverlight2Chat.LinqChatReference.
                  GetUsersCompletedEventArgs>(proxy_GetUsersCompleted);
    58         proxy.GetUsersAsync(_roomId, _userID);
    59     }
    60 
    61     void proxy_GetUsersCompleted(object sender, 
                  Silverlight2Chat.LinqChatReference.GetUsersCompletedEventArgs e)
    62     {
    63         if (e.Error == null)
    64         {
    65             ObservableCollection<LinqChatReference.UserContract> users = e.Result;
    66             ItmcUserList.ItemsSource = users;
    67         }
    68     }

    Here's the GetUsers method that we are calling in the WCF Service (LinqChatService.svc.cs). Notice that it's called GetUsers, and we did not create a GetUsersCompleted event handler or a GetUsersAsync method.

    62      List<UserContract> ILinqChatService.GetUsers(int roomID, int userID)
  6. Sending and receiving messages: You send messages when you click the Enter key of your keyboard or when you hit the Send button. When you click the carriage return key on your keyboard or the Send button, two other things are executed along with saving your message to the database: you get the messages from the database, as well as get the users from the database.
  7. 209     private void SendMessage()
    210     {
    211         if(!String.IsNullOrEmpty(TxtMessage.Text))
    212         {
    213             InsertMessage();
    214             GetMessages();
    215             GetUsers();
    216         }
    217     }

    Remember that we set up the timer when the main Grid loads.

    77     private void SetTimer()
    78     {
    79         timer = new DispatcherTimer();
    80         timer.Interval = new TimeSpan(0, 0, 0, 3, 0);
    81         timer.Tick += new EventHandler(TimerTick);
    82         timer.Start();
    83 
    84         _isTimerStarted = true;
    85     }

    Every 3 seconds, when you don't hit the Enter key of your keyboard, the timer tick event is called to get the messages and get the users from the database.

    219     void TimerTick(object sender, EventArgs e)
    220     {
    221         GetMessages();
    222         GetUsers();
    223     }

    The timer is stopped every single time you type in a message, and then resumes when you hit the Enter key. This is done so that we can stop the timer from refreshing our TxtMessage control while we're typing.

    186     private void TxtMessage_KeyDown(object sender, KeyEventArgs e)
    187     {
    188         if (e.Key == Key.Enter)
    189         {
    190             SendMessage();
    191             timer.Start();
    192             _isTimerStarted = true;
    193         }
    194         else
    195         {
    196             if (_isTimerStarted)
    197             {
    198                 timer.Stop();
    199                 _isTimerStarted = false;
    200             }
    201         }
    202     }
  8. Setting the scroll bar to the bottom of the messages: To set the scroll bar in the bottom of the messages, we simply supply the highest double value into the ScrollToVerticalOffset member of the Scroll Viewer XAML control.
  9. 179     private void SetScrollBarToBottom()
    180     {
    181         // set the scroll bar to the bottom
    182         SvwrMessages.UpdateLayout();
    183         SvwrMessages.ScrollToVerticalOffset(double.MaxValue);
    184     }
  10. Showing the messages in the Scroll View control: Perhaps, this is one of the most exciting parts of this tutorial. While I was coding the Silverlight 2 chat application, this is where I spent most of my time in. Getting all the messages and assigning them all in a ListBox XAML control just does not work for me. First, I want to be able to have a different color or different shade for the user and the message which is in the same line. I also wanted an alternating background for each message. This is accomplished by writing a little bit more code than we did with the Users list. The good thing about doing it this way is that, we don't have to retrieve all the messages for the current room; instead, we just retrieve the ones that we have not retrieved yet, because when you add a message to the panel control using this method, the UI remembers all that has been added, and there's no need to add them again.
  11. In line 109, we're instantiating a horizontal stack panel which will be added to the base stack panel in line 167. We did this programmatically so that we can alternate the background color as shown in lines 155-116. We're also adding a TextBlock which will hold the bold username in line 130, and a TextBox which will hold the message in line 164, to this stack panel. That was simple enough.

    So, why am I using a TextBox (line 133) instead of a TextBlock for the message beside the user name? I noticed that there was a bug with Silverlight and I read up, and sure enough, I was right. When using the KeyDown event of the message box, carriage returns are encoded in the messages that you type when you hit the Enter key. What that means is that, the messages are cut in two lines in various places. For example: Let's say you typed "Hello how are you doing?" in the message text box, and then hit the Enter key. The message "Hello how are you doing?" will be cut in two lines when you assign the Text value of the message box to a TextBlock, so it should read like this:

    Hello how are
    you doing?

    or this:

    Hello 
    how are you doing?

    We simply don't have any control where the newline character is inserted; not that we want it to be inserted anyway. Because of this bug, I noticed that assigning the Text value of the message box to another TextBox fixes this problem.

    100     void proxy_GetMessagesCompleted(object sender, 
                 Silverlight2Chat.LinqChatReference.GetMessagesCompletedEventArgs e)
    101     {
    102         if (e.Error == null)
    103         {
    104             ObservableCollection<LinqChatReference.MessageContract> 
                                                                 messages = e.Result;
    105 
    106             foreach (var message in messages)
    107             {
    108                 // add a horizontal stack panel
    109                 StackPanel sp = new StackPanel();
    110                 sp.Orientation = Orientation.Horizontal;
    111                 sp.HorizontalAlignment = HorizontalAlignment.Left;
    112                 sp.Width = SpnlMessages.ActualWidth;
    113 
    114                 // put an alternating background
    115                 if (!_isWithBackground)
    116                     sp.Background = new SolidColorBrush(
                                 System.Windows.Media.Color.FromArgb(100, 235, 235, 235));
    117 
    118                 // add a TextBlock to hold the user's name to the stack panel
    119                 TextBlock name = new TextBlock();
    120                 name.Text = message.UserName + ": ";
    121                 name.FontSize = 12.0;
    122                 name.FontWeight = FontWeights.Bold;
    123                 name.Padding = new Thickness(4, 8, 0, 8);
    124 
    125                 if (message.Color == "Gray")
    126                     name.Foreground = new SolidColorBrush(Colors.Gray);
    127                 else
    128                     name.Foreground = new SolidColorBrush(Colors.Black);
    129 
    130                 sp.Children.Add(name);
    131 
    132                 // add a TextBox to hold the user's message to the stack panel
    133                 TextBox text = new TextBox();
    134                 text.BorderBrush = new SolidColorBrush(Colors.Transparent);
    135                 text.FontSize = 12.0;
    136                 text.Text = message.Text.Trim();
    137                 text.VerticalAlignment = VerticalAlignment.Top;
    138                 text.Width = SpnlMessages.ActualWidth - name.ActualWidth;
    139                 text.TextWrapping = TextWrapping.Wrap;
    140                 text.Margin = new Thickness(0, 4, 4, 0);
    141                 text.IsReadOnly = true;
    142 
    143                 // change text color based on the user's chosen color
    144                 if(message.Color == "Red")
    145                     text.Foreground = new SolidColorBrush(Colors.Red);
    146                 else if (message.Color == "Blue")
    147                     text.Foreground = new SolidColorBrush(Colors.Blue);
    148                 else if (message.Color == "Gray")
    149                     text.Foreground = new SolidColorBrush(Colors.Gray);
    150                 else
    151                     text.Foreground = new SolidColorBrush(Colors.Black);
    152 
    153                 // put an alternating background
    154                 if (!_isWithBackground)
    155                 {
    156                     text.Background = new SolidColorBrush(
                                System.Windows.Media.Color.FromArgb(100, 235, 235, 235));
    157                     _isWithBackground = true;
    158                 }
    159                 else
    160                 {
    161                     _isWithBackground = false;
    162                 }
    163 
    164                 sp.Children.Add(text);
    165 
    166                 // add the horizontal stack panel to the base stack panel
    167                 SpnlMessages.Children.Add(sp);
    168 
    169                 // remember the last message id
    170                 _lastMessageId = message.MessageID;
    171             }
    172 
    173             SetScrollBarToBottom();
    174             TxtMessage.Text = String.Empty;
    175             TxtMessage.Focus();
    176         }
    177     }
  12. Logging Out: As soon as you click the Logout button, we stop the timer (line 227). Then, we delete the user in the LoggedInUser table by calling the WCF Service in line 229-230. Notice that we did not need to call a Completed event handler since we're not retrieving any values in the database. And lastly, we redirect the user to the Login XAML user control.
  13. As I mentioned earlier, you can also log-out the user when they hit the close button of the browser by catching the unload event of the body tag in the hosting ASP.NET page.

    225     private void BtnLogOut_Click(object sender, RoutedEventArgs e)
    226     {
    227         timer.Stop();
    228 
    229         LinqChatReference.LinqChatServiceClient proxy = 
                          new LinqChatReference.LinqChatServiceClient();
    230         proxy.LogOutUserAsync(_userID, _roomId, TxtbLoggedInUser.Text);  
    231 
    232         // redirect to the login page
    233         App app = (App)Application.Current;
    234         app.RedirectTo(new Login());
    235     }

Last Words

Building this Silverlight 2 web chat application was a fun learning experience for me. On my next blog/tutorial, I will be talking about how to chat with someone privately. As you may have already noticed, the user links are left empty; of course, I did this for a purpose. So watch out for my next blog.

As always, the code and the article are provided "as is", there is absolutely no warranties. Use at your own risk.

Note: The original article can be found here: http://www.junnark.com/Articles/Build-a-Silverlight-2-Web-Chat-Application.aspx.

License

This article, along with any associated source code and files, is licensed under The Code Project Open License (CPOL)

Share

About the Author

junnark
Web Developer
United States United States
None.

Comments and Discussions

 
QuestionHow can I apply to real server? Pinmemberguba55555-Jun-13 17:12 
Questionwhat is username and password PinmemberMember 89415944-Jun-12 18:42 
Questionsharepoint Chat Pinmemberranmoo26-Dec-11 19:00 
QuestionCannot run this. PinmemberMember 182069323-Aug-11 23:45 
QuestionSome details missing ! Pinmembermehdi Saghari18-Jul-11 23:21 
AnswerRe: Some details missing ! PinmemberDaveCS26-Jul-11 3:00 
GeneralCannot make it work PinmemberKenji Elzerman21-May-11 22:52 
GeneralRe: Cannot make it work PinmemberDaveCS26-Jul-11 5:17 
GeneralMy vote of 4 Pinmembermuralidarank27-Feb-11 22:06 
GeneralRe: My vote of 4 Pinmembercouchmanl18-Sep-11 15:28 
GeneralMy vote of 5 Pinmemberzzaamine10-Jan-11 12:12 
GeneralMy vote of 5 PinmemberEric Xue (brokensnow)31-Oct-10 0:19 
GeneralMy vote of 5 PinmemberNasenbaaer23-Aug-10 11:56 
Generalin VB.NET Pinmemberšprici5-Jun-10 6:50 
GeneralMy vote of 1 PinmemberJoshua Fazekas19-May-10 16:55 
GeneralRe: My vote of 1 Pinmemberdefwebserver1-Aug-10 11:55 
Generaldeployment Pinmembertheripevessel14-May-10 11:53 
GeneralConnection String PinmemberLazo_UK11-Nov-09 23:55 
QuestionHow to insert icon emotions in message chat ? PinmemberMember 19071008-Oct-09 0:38 
GeneralAlternative storage PinmemberPostnik27-Sep-09 5:20 
GeneralRe: Alternative storage PinmemberJan-Peter Zurek29-Nov-09 21:55 
GeneralLinq to MySql Pinmembersaurabhnijhawan198727-Jun-09 0:33 
Generalsilverlight2chat PinmemberPatientD25-Jun-09 6:18 
Generalcannot make it running Pinmembermanfbraun25-May-09 9:43 
GeneralRe: cannot make it running PinmemberMember 182069323-Aug-11 23:44 

General General    News News    Suggestion Suggestion    Question Question    Bug Bug    Answer Answer    Joke Joke    Rant Rant    Admin Admin   

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.

| Advertise | Privacy | Mobile
Web01 | 2.8.140916.1 | Last Updated 12 Feb 2009
Article Copyright 2009 by junnark
Everything else Copyright © CodeProject, 1999-2014
Terms of Service
Layout: fixed | fluid