Click here to Skip to main content
Click here to Skip to main content

NAnt Task to Capture Out of Bounds Source Monitor Metrics

, 12 Jun 2009
Rate this:
Please Sign up or sign in to vote.
NAnt user task that adds alarms on top of Source Monitor metrics to highlight source code that does not follow coding rules.
smanalyzer1

Introduction

In order to improve the quality of our produced code, I decided to investigate on the shelf code metrics tools. I finally retained Source Monitor tool from Campwood Software.

The first time this tool was run on our existing code (around 260000 CPP lines of code) we found that the Maximum Complexity metric (M9) goes up to 100 for a recommended range of [0...10]. As we did not have time to do refactoring, it has been decided to focus only on new developments. But here came the first question:

  • How to only report the metrics of new developed codes without being polluted by out of bound metrics raised by some existing code?

In addition, I also wanted to:

  • Automate the metric checks to include it into our automatic build process.
  • Raise alarms in case the new produced code does not match the default recommended rules.

Prerequisite

The SMAnalyzer task has been developed using NAnt 0.85 and for Source Monitor 2.5. Obviously, you need to have these two tools installed on your machine.

The SMAnalyzer task described in this article has been developed to parse details in XML files generated by Source Monitor. You will have to generate these files yourself. Please have a look at Source Monitor online help which is very clear.

Source Monitor implements the concept of checkpoints that allows monitoring your metrics over time. This first version of SMAnalyzer does not handle several checkpoints within a Source Monitor file. It always uses the first checkpoint found within the XML structure.

Concept

The initial idea is to define:

  • For new code: Default thresholds for all Source Monitor Metrics.
  • For legacy code: Exceptions to manage codes that are out of bounds from the default thresholds.

The task simply processes an existing Source Monitor XML file and checks for rules also specified using XML format:

smanalyzer/smanalyzer2

Using the Code

If you directly use the NAnt.SMAnalyzerTasks.dll assembly, you just have to copy it into the bin folder of your NAnt installation folder. If you prefer to rebuild it, please see the section 'How to build the task' below. Once the SMAnalyzer task is ready, you can use it in any scripts with the simple command below:

...
 <smanalyzer input=".\sm_details_result.xml" 
	rules=".\threshold_rules.xml" output=".\threshold_results.xml" />
...

The input attribute is used to specify the Source Monitor XML details result file. The rules attribute is used to specify the XML file containing the rules to apply while checking the results. The output attribute is used to specify the file where the check results will be stored.

Threshold Rules XML Syntax

The syntax used to define the thresholds is summarized by the code sample below:

<sourcemonitor_thresholds>
  <project version="1.0">
     <project_name>my project</project_name>
     <project_directory>D:\dev\my_project</project_directory>
     <defaults>
        .... 
        <metric id="M9" value=""><threshold min="0" max="10"/></metric />
        ....
     </defaults>
     <customs>
        <files>
           <file file_name="foo1.cpp">
              <metric id="M9" value=""><threshold min="0" max="20" enable="true"/>
		</metric>
              ...
           </file>
           <file file_name="foo2.cpp">
              <metric id="M9" value=""><threshold min="0" max="100" enable="true"/>
		</metric>
              ...
           </file>
           <file file_name="foo3.cpp">
              <metric id="M9" value=""><threshold min="0" max="0" enable="false"/>
		</metric>
           </file>
           ...
        </files>
     </customs>
  </project>
</sourcemonitor_thresholds>

project_name and project_directory tags are just here as a reminder of the Source Monitor file treated.

The two main interesting sections are defaults and customs:

  • In the defaults section, you define a threshold for each metric you are interested in. The rule defined here is applied by default for each file of the project.
  • In the customs section, you can set an exception for each metric checked on each file. Any exception reported here will overwrite the default threshold. You can either disable the check totally or specify another range.

Result File XML Syntax

The results of all checks is also saved using XML format. The skeleton given below summarizes the information reported:

<threshold_results>
  <files>
    <file file_name="foo1.cpp">
      <metric id="M9" value="9"><threshold min="0" max="20" result="good" /></metric>
      <metric id="M13" value="2.29"><threshold min="0" max="10" result="good" /></metric>
    </file>
    ...
    <file file_name="foo4.cpp">
      <metric id="M9" value="12"><threshold min="0" max="10" result="bad" /></metric>
      <metric id="M13" value="2.18"><threshold min="0" max="10" result="good" /></metric>
    </file>
    ...
  </files>
  <project>
    <project_name>my project</project_name>
    <sourcemonitor_version>2.5</sourcemonitor_version>
  </project>
  <statistics>
    <global total_count="71" error_count="4" success_count="67" />
  </statistics>
</threshold_results>

For each metric of each file, you have the final result of the check: good or bad. To facilitate the reading, we report the metric value computed by Source Monitor. At the end of the XML structure, we repeat some project information. And we put some statistics for a quick overview of the checks.

Post Processing

As the results are generated in XML format, they can easily be treated by some other tools for extra analysis. In the downloadable archive, you will find an XSL Style Sheet (thresholds_results.xsl) that processes the result file in order to build an HTML page that can be posted on your web server.
You can also imagine sending a mail to alert your development team when something starts going wrong, etc.

Handling Legacy Code

As mentioned earlier, one requirement was to remove noise brought by legacy code that is reported as out of bound.
This can be now easily achieved by defining correct exception rules within the rules file.
For instance, let's say that file foox.cpp is reported with a Maximum Complexity of 40. You can define the exception below:

     <customs>
        ...
        <files>
           <file file_name="foox.cpp">
              <metric id="M9" value=""><threshold min="0" max="40" enable="true"/>
		</metric>
              ...
           </file>
        ...
        </files>
     </customs>    

With such a rule, the file will not be reported in error except if new developments within this file deteriorate the score.

How To Build the Task

The NAnt task has been created with Visual Studio 2008 SP1 and is based on NAnt version 0.85. Framework 2.0 has been used.

To build the task, you just have to load the SMAnalyzer.sln solution within Visual Studio.
You may need to add the reference to NAnt.Core.dll that can be found in the bin folder of your NAnt installation.
Once the library is built, just copy it into the NAnt bin directory.

smanalyzer/smanalyzer3

Improvements

  1. As of today, block_depths sections from Source Monitor are not supported and could be added.
  2. Only the first checkpoint is supported by the task. Is it worth being able to read several of them?
  3. It would be nice to generate automatically exception rules that 'switch off' out of bound legacy code. May be with a dedicated XSL?
  4. Metric M8 which is a string is treated the same way as the others ... as a number ... sorry.

History

  • 12th June, 2009: Initial post

License

This article, along with any associated source code and files, is licensed under The Code Project Open License (CPOL)

Share

About the Author

Franck Paquier
Software Developer (Senior) Schlumberger
France France
No Biography provided

Comments and Discussions

 
GeneralThat rocks!!! My experience / small suggestion PinmemberJens Köster4-Jul-10 22:21 

General General    News News    Suggestion Suggestion    Question Question    Bug Bug    Answer Answer    Joke Joke    Rant Rant    Admin Admin   

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.

| Advertise | Privacy | Mobile
Web04 | 2.8.140814.1 | Last Updated 12 Jun 2009
Article Copyright 2009 by Franck Paquier
Everything else Copyright © CodeProject, 1999-2014
Terms of Service
Layout: fixed | fluid