Click here to Skip to main content
Click here to Skip to main content
Go to top

Creationism: Dynamic Objects Using WinJS and XML

, 4 Mar 2013
Rate this:
Please Sign up or sign in to vote.
How-To: Create a JavaScript object during runtime based on an XML file.

Introduction

Welcome to the latest Creationism article. The Creationism series focuses on various constructs using common Microsoft technologies. This entry will show how to create a JavaScript object based on an xml file. The article will assume basic JavaScript, WinJS, and XML experience.

The Problem 

I am writing an app for Windows 8 and need a maintainable set of values I can use in JavaScript. My first attempt included creating a Constants object that contained the values I needed. This soon became unmanageable as the number of constants increased. To fix this, something like an ASP.Net web.config file would be great. The problem is I do not want the restriction of accessing it through a sort of AppSettings property as with ASP.NET websites. My preference would be a JavaScript object that contains the properties I need but from a configuration file. How would I do this? 

The Solution 

What would solve my problem is a JavaScript object created at runtime that includes properties and values based on an XML file. A few things known about JavaScript make this solution viable:

  1. JavaScript is a highly dynamic language. Considering this fact, creating an object during runtime should be like Eddie Van Halen playing a guitar.
  2. Object properties can be accessed and manipulated using normal array syntax.
  3. Server data is accessible from JavaScript. AJAX is the acronym.
  4. Since an XML file is obtained, it can be parsed no differently than an average HTML document.

Combing the implementation of these four facts will enable me to create an object at runtime using the data of an XML file. The next section will explain how this is done.

The Implementation 

There are three basic steps to implementing this. The mechanisms accessible from WinJS will help tremendously. First, the XML file needs to be obtained. This can be done using the WinJS.xhr function. More information on this function can be found on MSDN: “WinJS.xhr function (Windows)”. The next step is to parse the XML file and then to create the Constants object based on the data retrieved from the file. These steps will be explained in more detail in the following sections. 

The Configuration File 

To consume the file, the file will need to be created. Below is the sample content in the file:

<?xml version="1.0" encoding="utf-8" ?>
<Configuration>
  <Constant1>
    <add name="String" value="Value 1" />
    <add name="Integer" value="1" />
  </Constant1>
  <Constant2>
    <Boolean>
      <add name="IsTrue" value="true" />
      <add name="IsFalse" value="false" />
    </Boolean> 
  </Constant2>
  <Constant3>
    <add name="SubConstant" value="SubValue" />
    <NextSubConstant>
      <add name="NextSub" value="NextSubValue" />
    </NextSubConstant>
  </Constant3>
</Configuration>  

As can be seen, this is nothing more than an average XML file. There are various nested nodes and attributes to show some of the possible node structures supported by this solution. For this article, the name of the file is “config.xml” and the root node is “Configuration”. 

The Data 

The WinJS.xhr function is used to get the XML file. This function takes an object used to configure the request and returns a Promise. This is shown below:

WinJS.xhr({
    url: "config.xml",
    headers: {
        "If-Modified-Since": "Wed, 2 Feb 2000 11:11:11 GMT"
    },
    responseType: "document"
}).done(function(result) {
    if (result.status === 200) {
        var data = result.responseXML;
        var root = data.querySelector("Configuration");
        WinJS.Namespace.define("ST.Constants");
        iterate(root, ST.Constants);
    } else {
        /* ... Handle missing document ... */
    }
}); 

Overview 

Above shows what could be thought of as jQuery AJAX on steroids. The xhr function is called taking an object used to configure the XMLHttpRequest. The only required property is url. Other optional properties can be used to further configure the XMLHttpRequest. This is much like jQuery’s ajax method but, in this case, a Promise object is returned. The done method of the returned Promise is used to process the returned XML document.

Configuring the XMLHttpRequest

WinJS.xhr({
    url: "config.xml",
    headers: {
        "If-Modified-Since": "Wed, 2 Feb 2000 11:11:11 GMT"
    },
    responseType: "document"
})  

The parameter passed to the xhr function is an object. This object is used to configure the XMLHttpRequest as mentioned previously. Here the url is set to the path to the XML file. Then, the headers property is used which includes the “If-Modified-Since” date. This ensures the XML file is obtained. The last property is responseType which is used to make sure the result of this call is a document able to be parsed by JavaScript.

Processing the XML File

.done(function(result) {
    if (result.status === 200) {
        var data = result.responseXML;
        var root = data.querySelector("Configuration");
        WinJS.Namespace.define("ST.Constants");
        iterate(root, ST.Constants);
    } else {
        /* ... Handle missing document ... */
    }
});

The next step is to process the returned XML file. The xhr function returns a Promise object. This object contains a done method that can be used for processing the results of the xhr function call. As with average use of XMLHttpRequests, the first step is to make sure it succeeded. Using the result passed into the done handler, the status of the request can be determined. This result object is the XMLHttpRequest. It contains useful properties among these being status and responseXML. A successful status is 200. If the status is 200, the function proceeds with processing the results by first getting the responeXML from the result object. Since the responseType was set to “document”, the content of responseXML is the XML document that can be parsed by JavaScript. The iteration of this document will be described in more detail below but there are two more steps to do first. The iteration method takes two parameters. The first parameter is the node to process. To begin, the root node needs to be processed so this is what is retrieved. The second parameter is the object to process with the node. The object is meant to be static so the WinJS.Namespace.define method is used to create this. The two parameters are passed to the iterate method. The next section provides more detail.

The Iteration

There is hair, teeth, flesh and bones but the iterate method is the meat. Within this method is the traversal of the XML file along with the additions to the Constants object. Below is the implementation:

function iterate(node, ns) {
   if (node && node.childNodes) {
      if (node.childNodes.length > 0) {
         var nodes = node.childNodes;
         var len = nodes.length;
         for (var i = 0; i < len; i++) {
            var sub = nodes[i];
            if (sub.nodeType === sub.ELEMENT_NODE) {
               var name = sub.nodeName;
               if (sub.childNodes.length > 0) {
                  ns[name] = {};
                  iterate(sub, ns[name]);
               } else {
                  var attName = sub.getAttribute("name");
                  var attValue = sub.getAttribute("value");
                  //Key/Value Attribute
                  if (attName && attValue) {
                     ns[attName] = attValue;
                  //Node Name/Value
                  } else if (attValue && node.nodeName && !attName) {
                     ns[name] = attValue;
                  } else {
                     /* ... Handle Data Not Available ... */
                  }
               }
            }
         }
      } else if (node) {
         var name = node.nodeName;
         var attName = node.getAttribute("name");
         var attValue = node.getAttribute("value");
         //Key/Value Attribute
         if (attName && attValue) {
            ns[attName] = attValue;
            //Node Name/Value
         } else if (attValue && node.nodeName && !attName) {
            ns[name] = attValue;
            //Log Warning
         } else {
            /* ... Handle Data Not Available ... */
         }
      }
   }
}

Above is the implementation of the iterate method. This method has various validation checks for the current node, child nodes, and attributes. There is also room for handling missing data.

Handling No Children

The method begins by checking whether the given node and its children exist. If any children exist, it continues processing the child nodes. If there are no children, the method checks to make sure there is a node and upon success attempts to get the name and value attributes. This is shown below:

else if (node) {
   var name = node.nodeName;
   var attName = node.getAttribute("name");
   var attValue = node.getAttribute("value");
   //Key/Value Attribute
   if (attName && attValue) {
      ns[attName] = attValue;
      //Node Name/Value
   } else if (attValue && node.nodeName && !attName) {
      ns[name] = attValue;
      //Log Warning
   } else {
      /* ... Handle Data Not Available ... */
   }
}

There are three possible paths than can be taken here:

  1. If both the name and value attributes exist, the Constants object is updated. A new property is added to the object. This part takes advantage of the fact JavaScript object properties can be accessed and manipulated by using normal array syntax. The new property is created with the value of the name attribute and is assigned the value of the value attribute.
  2. If the value attribute and node name exist but not the name attribute, the Constants object is updated using the node name. The name of the new property is the name of the node. The value of this new property is the value of the value attribute.
  3. If neither of the above two cases exist, there is no data available as this solution is currently implemented. This is a good place to handle such a case by either logging the occurrence, adding default data, or any other way that is necessary.

Handling with Children

If the given node exists with children, the iterate method proceeds by processing the child nodes. The snippet below shows this:

if (node.childNodes.length > 0) {
   var nodes = node.childNodes;
   var len = nodes.length;
   for (var i = 0; i < len; i++) {
      var sub = nodes[i];
      if (sub.nodeType === sub.ELEMENT_NODE) {
         var name = sub.nodeName;
         if (sub.childNodes.length > 0) {
            ns[name] = {};
            iterate(sub, ns[name]);
         } else {
            var attName = sub.getAttribute("name");
            var attValue = sub.getAttribute("value");
            //Key/Value Attribute
            if (attName && attValue) {
               ns[attName] = attValue;
               //Node Name/Value
            } else if (attValue && node.nodeName && !attName) {
               ns[name] = attValue;
            } else {
               /* ... Handle Data Not Available ... */
            }
         }
      }
   }
}

The node is checked to make sure it has child nodes. If it does, each child node is processed in a simple for loop. The current child node is stored and then a check is done to be sure it is an element node. If so, the method checks this node’s children. If they exist, the name of the sub node is used to create a new property of the given Constants object. Then the iterate method is called again this time passing in the current sub node and the new property of the Constants object. This provides the support needed to add nested nodes in the XML file.

If the current child node does not have any children, it is processed in the same way as what was described in the previous section “Handling No Children”.

The Outcome 

As you are probably aware by now, this solution creates an object at runtime. Using the Watch window while debugging the structure of the object can be seen: 

Solution Outcome in Watch Window while debugging 

This shows that the structure of the Constants object mirrors the structure of the XML file.

Originally Perceived Enhancements

Using this solution offers numerous benefits. It is flexible, scalable, and performs well. It provides practically infinite levels of nesting in the xml file (barring any call stack limitations when the prototype chain is created). There is also no performance hit from going across a network since the configuration file is local to the app. Among these strengths, there are still improvements that can be made.

Attribute Values

So far, the values of the constants are set as the attribute values in the XML file. Node values could be used as well.

Data Types

Not every value is appropriate as a String. Additional logic could be added to the iteration to have values of appropriate data types (e.g. If the value is meant to be an Integer, make it an Integer; if the value is meant to be a Date, make it a Date). 

Caching

This creates an object at runtime. Don’t create the same object every time the app is started. When the object is first created, store it. Then, retrieve it from storage when the app loads again. Only create this object when a change has been made.

Conclusion 

This article presented a way to create objects that are easily configurable by updating values in an XML file. As with most things, there are pros and cons to this solution but it does the job, and does the job well. Needless to say, the band is happy and the object has been brought to life. 

Thank you for reading and please see my other Creationism articles.

History

  • 17-Nov-2012: Initial creation.
  • 03-Mar-2013: Updated Flickr Image. 

License

This article, along with any associated source code and files, is licensed under The Code Project Open License (CPOL)

Share

About the Author

Caleb McElrath
Software Developer Magenic Technologies Inc
United States United States
Developer for Magenic Technologies Inc.
 
Caleb began his trek at the age of 16 starting with Turbo Pascal (wanting to expand his horizons from the basics of HTML). Realizing this was not nearly a modern industry standard programming language, he moved on to Visual C++. There he was met with many object-oriented and data structure problems and solutions. His horizons took on the world from there where he explored everything from Ruby, Python, PHP, Flash, to .NET, Java, and jQuery.
 
In Microsoft technologies is where Caleb finds most of his time spent. His days and long nights are filled with the .NET Framework and SQL Server.

Comments and Discussions

 
QuestionNeed the Image Updated -help? PinmemberCaleb McElrath28-Feb-13 2:58 
AnswerRe: Need the Image Updated -help? PinmemberIrina Pykhova1-Mar-13 0:32 
AnswerRe: Need the Image Updated -help? PinmemberIrina Pykhova4-Mar-13 1:08 
GeneralRe: Need the Image Updated -help? PinmemberCaleb McElrath4-Mar-13 1:17 

General General    News News    Suggestion Suggestion    Question Question    Bug Bug    Answer Answer    Joke Joke    Rant Rant    Admin Admin   

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.

| Advertise | Privacy | Mobile
Web03 | 2.8.140905.1 | Last Updated 4 Mar 2013
Article Copyright 2012 by Caleb McElrath
Everything else Copyright © CodeProject, 1999-2014
Terms of Service
Layout: fixed | fluid