Click here to Skip to main content
11,505,486 members (68,250 online)
Click here to Skip to main content

End-to-end Email Address Verification for Applications

, 19 Mar 2013 CPOL 606.4K 6.6K 196
Rate this:
Please Sign up or sign in to vote.
In this article, we would discuss a very brief and overall technique to verify the email addresses of the users that signup for a web account.

 Introduction  

Email has become a necessary and inseparable part of our day-to-day life. Even in the web applications we develop, the primary mode of information exchange between the website/application and the user is the email address. For this, some sites have a primary email and a secondary email (if something fails in primary, the information to be communicated to the user would be sent to the secondary address).

In any web portal and/or applications, where a diversified set of users are expected to visit and register, care should be taken, in validating the email address, since this is being intended to serve as the primary medium of contact between the user and the website. 

Scope:  

The scope of this utility is two-pronged:

  1. Soft syntactical validation of email address. 
  2. Deep Network Checking where in the email server is contacted for the existence of the address. 

Validations 

A very preliminary validation of email addresses is by analyzing the pattern of addresses. That is absolutely straight forward and we can define a regular expression to get the job done.

The following regular expression method in C#, would tell you, if the passed email address is syntactically valid or not. Note that, this verifies only syntactical validity and not whether the email address exists or not.

public static bool isEmail(string inputEmail)
{
   inputEmail  = NulltoString(inputEmail);
   string strRegex = @"^([a-zA-Z0-9_\-\.]+)@((\[[0-9]{1,3}" +
         @"\.[0-9]{1,3}\.[0-9]{1,3}\.)|(([a-zA-Z0-9\-]+\" + 
         @".)+))([a-zA-Z]{2,4}|[0-9]{1,3})(\]?)$";
   Regex re = new Regex(strRegex);
   if (re.IsMatch(inputEmail))
    return (true);
   else
    return (false);
} 

The next level of validation, we can attempt is to make a negotiation with the SMTP server and validate. Some mail servers respond even to VRFY and/or RCPT SMTP commands as to whether the email address is valid or not. But servers which are very strictly configured of not disclosing non-existing addresses, will always acknowledge any junk addresses in their domain and would bounce them on their own later. We need to tackle each of the following.

Validating via SMTP Network Connection

string[] host = (address.Split('@'));
string hostname = host[1];
     
IPHostEntry IPhst = Dns.Resolve(hostname);
IPEndPoint endPt = new IPEndPoint(IPhst.AddressList[0], 25);
Socket s= new Socket(endPt.AddressFamily, 
        SocketType.Stream,ProtocolType.Tcp);
s.Connect(endPt); 

This step will throw an exception, if the domain is not valid, so that you can flag that the email address is invalid.

Validating via SMTP Handshakes

If the domain was okay, we can try to handshake with the actual server and find out whether the email address is valid or not. Perhaps, at this point, I would like to suggest the way an application used to negotiate to a SMTP server similar to how Peter has explained here (EggHeadCafe). We would not need the entire block of code anyway. 

We can check each section of the SMTP negotiation like MAIL FROM and RCPT TO and optionally VRFY SMTP commands. 

If from domains or from addresses are prohibited or not in the SMTP server's allow list, MAIL FROM may fail. Mail servers which allow VRFY command will let you understand whether the email address is valid or not.

My CodeSection

Since we had a similar requirement, the EggHeadCafe was really useful and I would like to share the code snippet for other users, who might be having a similar requirement.

string[] host = (address.Split('@'));
string hostname = host[1];

IPHostEntry IPhst = Dns.Resolve(hostname);
IPEndPoint endPt = new IPEndPoint(IPhst.AddressList[0], 25);
Socket s= new Socket(endPt.AddressFamily, 
             SocketType.Stream,ProtocolType.Tcp);
s.Connect(endPt);

//Attempting to connect
if(!Check_Response(s, SMTPResponse.CONNECT_SUCCESS))
{                
    s.Close();
    return false;
}

//HELO server
Senddata(s, string.Format("HELO {0}\r\n", Dns.GetHostName() ));
if(!Check_Response(s, SMTPResponse.GENERIC_SUCCESS))
{
    s.Close();
    return false;
}

//Identify yourself
//Servers may resolve your domain and check whether 
//you are listed in BlackLists etc.
Senddata(s, string.Format("MAIL From: {0}\r\n", 
     "testexample@deepak.portland.co.uk"));
if(!Check_Response(s, SMTPResponse.GENERIC_SUCCESS))
{
    s.Close();
    return false;
}


//Attempt Delivery (I can use VRFY, but most 
//SMTP servers only disable it for security reasons)
Senddata(s, address);
if(!Check_Response(s, SMTPResponse.GENERIC_SUCCESS))
{
    s.Close();
    return false;
}
return (true);

Check_Response, SendData are available in the original source code and you can download it from there. But you may need to read through the associated license agreement, regarding retaining copyright notices in your code. Since this is just a code snippet to introduce you to the idea, only relevant code area are being mentioned.

Temporary Validation

All goes well, if network conditions are ok. But there may be temporary network problems preventing connections. If you expect that your host may be slow, then you can send a dummy link to the email address and activate the account only if the user goes to the address and clicks the link. Otherwise, you can stop the account activation step, periodically reclaiming junk accounts by having a scheduled task in your web application. 

DNS Utility: 

Sincere thanks and credit is given to Heijden whose DNS utility is being made use of for looking Mx servers in the application. This provides a cleaner separation of concerns in the application. 

To Summarize...

In fact, I hope a lot of web developers would be in need of similar validation routines, to ensure that the email addresses are valid and I really hope that the above hints would be helpful to them. Thanks Peter, your article really helped me and I hope your article and whatever hints I have been learning, which I have shared above, would really help more developers having similar requirements to solve. 

License

This article, along with any associated source code and files, is licensed under The Code Project Open License (CPOL)

Share

About the Author

Vasudevan Deepak Kumar
Software Developer
India India
Vasudevan Deepak Kumar is from Chennai, India who has been in the programming career since 1994, when he was 15 years old. He has his Bachelors of Engineering (in Computer Science and Engineering) from Vellore Engineering College. He also has a MBA in Systems from Alagappa University, Karaikudi, India.
He started his programming career with GWBasic and then in his college was involved in developing programs in Fortran, Cobol, C++. He has been developing in Microsoft technologies like ASP, SQLServer 2000.
His current focus is ASP.NET, C#, VB.NET, PHP, SQL Server and MySQL. In his past-time, he listens to polite Carnatic Music. But the big question is that with his current Todolist backlog, does he get some past time?
Follow on   Twitter   LinkedIn

Comments and Discussions

 
GeneralRe: My vote of 5 Pin
superbDotNetDeveloper22-Aug-13 0:01
membersuperbDotNetDeveloper22-Aug-13 0:01 
SuggestionRegex Etc. Pin
Mike-MadBadger19-Mar-13 20:42
memberMike-MadBadger19-Mar-13 20:42 
QuestionPlease Help Pin
ali_331014-Mar-13 10:19
memberali_331014-Mar-13 10:19 
GeneralMy vote of 1 Pin
Raghu KT12-Sep-12 0:37
memberRaghu KT12-Sep-12 0:37 
GeneralNo download Pin
Raghu KT11-Sep-12 21:24
memberRaghu KT11-Sep-12 21:24 
GeneralMy vote of 1 Pin
Gourav Bhatt7-Jun-12 20:17
memberGourav Bhatt7-Jun-12 20:17 
GeneralMy vote of 5 Pin
Jack_32131-May-12 11:31
memberJack_32131-May-12 11:31 
QuestionError in attempting to connect Pin
Yenyen Suwardy8-May-12 22:02
memberYenyen Suwardy8-May-12 22:02 
Hi,
I tried to verify my own yahoo.com email but run into an error at this line:
s.Connect(endPt);

This is the error:
A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond 72.30.38.140:25

Any idea what could be happening? I tried with gmail, also ended up with the same error.
AnswerRe: Error in attempting to connect - because the code is wrong Pin
maciekplewa18-Jul-12 19:32
membermaciekplewa18-Jul-12 19:32 
GeneralMy vote of 4 Pin
naveen kacham28-Feb-12 18:53
membernaveen kacham28-Feb-12 18:53 
Suggestion!Check Responce Code snippet Pin
nobuhle.mnguni@gmail.com28-Oct-11 0:28
membernobuhle.mnguni@gmail.com28-Oct-11 0:28 
GeneralRe: !Check Responce Code snippet Pin
Will Marcouiller11-Apr-12 19:06
memberWill Marcouiller11-Apr-12 19:06 
GeneralMy vote of 1 Pin
Nate_11-Aug-11 11:48
memberNate_11-Aug-11 11:48 
QuestionMy short and accurate regex for emails Pin
rhyous31-Jul-11 15:35
memberrhyous31-Jul-11 15:35 
Generalplease send me download link of email verification Pin
ChintanParikh26-Apr-11 20:59
memberChintanParikh26-Apr-11 20:59 
GeneralEmail Validation Pin
neerajgupta.84200110-Jan-11 6:51
memberneerajgupta.84200110-Jan-11 6:51 
GeneralMy vote of 1 Pin
Rich O.22-Dec-10 4:01
memberRich O.22-Dec-10 4:01 
GeneralMy vote of 2 Pin
Henry.Ayoola16-Dec-10 22:03
memberHenry.Ayoola16-Dec-10 22:03 
QuestionMissing link to Source Code? Pin
Ranch Camal4-Nov-10 7:36
memberRanch Camal4-Nov-10 7:36 
AnswerRe: Missing link to Source Code? Pin
Will Marcouiller11-Apr-12 19:09
memberWill Marcouiller11-Apr-12 19:09 
GeneralMy vote of 5 Pin
pradipgh26-Jul-10 21:00
memberpradipgh26-Jul-10 21:00 
GeneralMy vote of 1 Pin
wilson2good3-Jun-10 18:49
memberwilson2good3-Jun-10 18:49 
GeneralEmail verification not working for me Pin
Najmul Hoda5-May-10 20:24
memberNajmul Hoda5-May-10 20:24 
GeneralMy vote of 1 Pin
TringXRay13-Apr-10 3:17
memberTringXRay13-Apr-10 3:17 
GeneralDoes not validate emails such as john.h.smith@somewhere.com Pin
vossjck23-Feb-10 4:26
membervossjck23-Feb-10 4:26 

General General    News News    Suggestion Suggestion    Question Question    Bug Bug    Answer Answer    Joke Joke    Rant Rant    Admin Admin   

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.

| Advertise | Privacy | Terms of Use | Mobile
Web04 | 2.8.150520.1 | Last Updated 19 Mar 2013
Article Copyright 2003 by Vasudevan Deepak Kumar
Everything else Copyright © CodeProject, 1999-2015
Layout: fixed | fluid