Click here to Skip to main content
Click here to Skip to main content

Tagged as

Code Project Quick Answers FAQ

, 19 Apr 2013 CPOL
Rate this:
Please Sign up or sign in to vote.
This is an FAQ for the Quick Answers section. It can be modified by any Silver member.

Table of Contents

  1. What is the Questions and Answers system?

    It's a simple system that allows you to ask questions and receive answers. It's very similar to our current message boards but it has been tuned specifically to make it easier to spot the best answer to a given question, and to allow you to search and browse for answers to questions.

  2. How is this different from the message boards?

    This system is different from our message boards in a number of ways.

    Most importantly, questions and their answers are presented in a flat list (BBS style) instead of a threaded format. This is in keeping with more traditional Question and Answer style boards and helps emphasise working towards getting the best answer. However - we still provide a threaded discussion at the end of each question to allow clarification or rambling discussions.

    We've also moved back to our old forum's voting system, whereby questions and answers can be voted on a scale instead of just good/bad. We tried to encourage members to vote Good question / bad question but it never really worked. We strongly believe that life works in shades of grey.

    We have also worked to integrate this Questions and Answers system into our main content system. When searching for content on the site you no longer need to search the forums then search the articles: you can now search from a single location and have all the results appear in one spot.

    By moving to a flat-format we've also been able to offer different options for viewing answers: order by the top answers or order by the latest answers. If there are more answers than will fit on a page then you can page through and still keep the original question in view.

    We also now allow anyone with sufficient reputation to edit any question or answer. By moving our Question and Answer system into our main content infrastructure we automatically gain versioning, rollback, and the ability for any member of sufficient level to edit the questions and answers. Think a question is poorly worded? Then edit it! Not only does this help others answer it, it adds to your reputation.

    A great side-benefit of our system is that we now support snippets and tips n' tricks. Got a small tip or piece of code that doesn't warrant an article? Post it as a Tip & Trick!

    Finally, you will notice that there is now only one message board for questions and answers. We will keep the discussion-oriented boards open such as the Lounge, but everything else will be merged into one board (a long awaited goal!) which means no more cross posting, no more hunting around forums, and no more questions posted in the wrong forum. To ensure you don't get swamped we make it easy to set your filters so you see only those topics in which you are interested.

  3. Why?

    Because it's overdue. 4 years ago we started experimenting with different ways in which our forums could better serve the community. We tried flat (BBS) style forums, different voting systems, child forums or a single forum with filters (a system we built into our article content management system early).

    Around a year ago we toyed with the idea of using our article content system as a replacement for our forum system, and once we had in place enough of the pieces for the article system (different articles types such as Technical blogs, versioning, editing permissions and parent-child article relationships) it all fell into place very easily.

    Our forums just weren't well suited for targeted questions and answers. Discussion threads are difficult to follow and finding the best, or at least a good, answer was much harder than needed. Our forums are great for conversation threads so we're keeping the Lounge, Soapbox and other discussion-based forums.

  4. What are the rules to posting?

    A few simple rules when posting your question.

    1. Have you searched or Googled for a solution?
    2. Be specific! Don't ask "I need to write a booking application". Specify exactly what it is you need help with.
    3. Keep the subject brief but descriptive. eg "How do I change the dialog colour?"
    4. Keep the question as concise as possible. If you have to include code, include the smallest snippet of code you can - do not dump your entire codebase.
    5. Tag your question appropriately.
    6. Your question may be edited or retagged by others. Anything inappropriate will be removed.
    7. If you have a school or university assignment, assume that your teacher or lecturer is also reading these forums.
    8. Be courteous and DON'T SHOUT. Everyone here helps because they enjoy helping others, not because it's their job.
    9. Do not remove or empty a message if others have replied. Keep the thread intact and available for others to search and read.
    10. Do not be abusive, offensive, inappropriate, harass anyone on the boards or post ads or spam. Doing so will get you kicked off and banned. Play nice.

  5. How do I use this thing?

    First, select "Post a Question" from the green tile on the home page.

    QuickAnswersFAQ/ask-a-question.png

    Next, enter your question or "subject." Make sure to that your subject is between 20 and 250 characters, and between 3 and 50 words.

    QuickAnswersFAQ/enter-a-subject.png

    Then, begin typing your related tags in the subject field. If existing tags are related to what you begin to enter, a dropdown will appear with those tags which you can select from.

    QuickAnswersFAQ/select-tag.png

    If you have question typed in another program and want to cut and paste it into the window, make note of the options below.  

    1. Strip HTML: HTML markup will be removed from the text.
    2. Encode HTML: Paste text will be automatically HTML encoded.
    3. Paste as-is: Clipboard will be pasted as-is, preserving HTML tags and entities.
    4. Code block: Clipboard text will be wrapped in PRE tags and content HTML encoded, always.
    5. Quoted Text: Clipboard text will be pasted within a quote block.
    6. Best guess: Sniff pasted text to see if it contains code and wrap in PRE blocks if it does.
  6. How does accepting solutions work?

    Questions provide the option to "accept" an answer. Only the author has this ability. This is done by clicking the "Accept Solution" button. The author also has the option to undo this operation. Though multiple solutions can be accepted we recommend choosing as few as possible. By far the most common scenario is to have one accepted solution. But this depends, entirely, on the nature of the question.

    We strongly encourage authors to choose an accepted solution as often as possible. Of course, assuming such a solution exists. When an solution is designated as accepted its header is highlighted in green. It also appears at the top of the "Top Rated" tab.


  7. How do I improve my question?

    Sometimes we get so deep into a problem that we lose the ability to describe it in a way other people can understand. It's OK. If members are commenting on your question, saying they do not understand your query or need more information, please use the "Improve question" option in the bottom-right corner. Please excuse our members curtness in the comments. This is a common problem we see in the hundreds on a daily basis and our volunteers on the Quick Answers fields are battle-weary. Please do not re-post or bump your question. If you approach other members with unending politeness and improve your question earnestly the world will be a better place.

     


  8. How does editing content work?

    The ability to edit posts is dependent on your levels for specific reputation types. The following describes one or more levels and a set of associated reputation types. You have edit permission if you are the author or if you match all the levels with any one of the associated reputation types. We're still fine-tuning these rules so they may be tweaked.  

    silver
    • Author
    • Authority
    • Editor
    • Organiser

  9. How does deleting work?

    The ability to delete entries in Quick Answers is dependent on your member type[^]. In order to delete entries in Quick Answers you must be either a Subeditor[^], Protector[^], Editor[^] or Admin[^]. We're still fine-tuning these rules so they may be tweaked. You can find all privileges such as deleting questions or answers at the Member Privileges page[^]


  10. What is a 'Closed' tag?

    A tag that is "closed" can no longer be used to tag new questions. Only members with sufficient reputation are able to close tags. A tag may be closed for any of the following reasons:

    • Is considered a duplicate of another tag – perhaps due to an alternate spelling.
    • Is inappropriate to be used as a tag.
    • Is obsolete and should no longer be attributed to new questions.

  11. How does the reputation system work?

    Reputation is something you gain - or lose - as you contribute to our communal knowledge base. Posting an article increases your reputation, but posting a bad article that other members down- vote decreases your reputation. If your goal is to increase your reputation then write good articles, vote for other good articles, hope that others in turn vote for your articles, and help out by organising and cleaning up the questions and answers. Vote them up, answer questions, or edit questions and answers that need a little help.

    Full details can be on the Reputation system page.

  12. Can I create new tags?

    The ability to create new tags depends on your reputation. Specifically, if you have the reputation level for any of the reputation types described below, you can create tags (if this is unclear see the Reputation system page for more info). We're still fine-tuning these rules so they may be tweaked.

    silver
    • Author
    • Authority
    • Editor
    • Organiser

  13. There seems to be no way to accept an answer as correct. Am I missing something?

    Currently you can only "accept" answers posted by other members. Stay tuned.

License

This article, along with any associated source code and files, is licensed under The Code Project Open License (CPOL)

Share

About the Author

Sean Ewington
Technical Writer CodeProject
Canada Canada
Sean Ewington is the Content Manager for CodeProject.
 
His background in programming is primarily C++ and HTML, but has experience in other, "unsavoury" languages.
 
He loves movies, and likes to say "inconceivable" often, even if it does not mean what he thinks it means.

Comments and Discussions

 
GeneralMy vote of 4 PinmemberKarstenK14-Aug-14 7:15 
QuestionHow can I add Image in a Question? PinprofessionalHardikPatel8913-May-14 21:30 
AnswerRe: How can I add Image in a Question? PinstaffSean Ewington14-May-14 4:23 
QuestionHow to activate my account PinmemberSujit Bhujbal23-Mar-14 20:47 
Hi
My account get closed by codeproject. how to activate my account. my articles also not viewing in my profile.
 
http://www.codeproject.com/Members/Sujit-Bhujbal[^]
 
Please let me know
AnswerRe: How to activate my account Pinprofessional Jas 241-Apr-14 23:15 
QuestionHow to use hovering property to buttons in vb.net PinmemberAbhayaismat13-Mar-14 22:05 
SuggestionPlease get feedback or reason form members before they will Answer Downvoted. PinprofessionalAravindba9-Mar-14 21:32 
QuestionMessage Removed PinmemberManis Dubey22-Jan-14 20:47 
QuestionConvert string date dd/mm/yyyy hh:mm:ss format into date dd/mm/yyyy format Pinmembersanjay3023-Nov-13 4:15 
AnswerRe: Convert string date dd/mm/yyyy hh:mm:ss format into date dd/mm/yyyy format PinstaffSean Ewington25-Nov-13 5:44 
QuestionREST web service using Json-Ajax in html PinmemberGurunathan301019-Sep-13 2:47 
Questiondynamic vertical menu and submenus PinmemberMember 98910202-Jul-13 21:22 
SuggestionReply to All PinmemberWidmarkRob23-May-13 16:40 
GeneralRe: Reply to All PinstaffSean Ewington24-May-13 9:54 
QuestionHow can I reject a solution to my question? because it doesn't answer the question. Pinmemberdebil12311-Apr-13 6:12 
Questiondisplay image in report viewer PinmemberMember 995924210-Apr-13 15:31 
QuestionHow to delete a question Pinmembermuneebalikiyani5-Apr-13 0:51 
AnswerRe: How to delete a question Pinmember ProgramFOX5-Apr-13 1:19 
SuggestionComment vs. Answer PinmvpMichael Haephrati9-Mar-13 7:29 
QuestionGenealogy Tree PinmemberJyotsanapatel23-Dec-12 18:28 
QuestionIs it possible to add picture to my post? [modified] Pinmemberwerfog13-Nov-12 6:03 
QuestionDeleting entries PinmemberProgramFOX30-Oct-12 0:19 
AnswerRe: Deleting entries PinstaffSean Ewington30-Oct-12 3:30 
QuestionWhat to do, when I found a solution on my own? PinmemberAndy41130-Oct-12 0:18 
AnswerRe: What to do, when I found a solution on my own? PinstaffSean Ewington30-Oct-12 3:35 
GeneralRe: What to do, when I found a solution on my own? PinmemberAndy41130-Oct-12 4:18 
Questiondoubt for marquee Pinmembersshhhhhhh17-Oct-12 2:53 
SuggestionVoting Mechanism PinmemberKuthuparakkal6-Sep-12 21:49 
QuestionPasting Google links as Solution to a question. Is that right? PinmemberShaikhM26-Jun-12 12:32 

General General    News News    Suggestion Suggestion    Question Question    Bug Bug    Answer Answer    Joke Joke    Rant Rant    Admin Admin   

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.

| Advertise | Privacy | Terms of Use | Mobile
Web04 | 2.8.141030.1 | Last Updated 19 Apr 2013
Article Copyright 2010 by Sean Ewington
Everything else Copyright © CodeProject, 1999-2014
Layout: fixed | fluid