Click here to Skip to main content
Click here to Skip to main content

How to Access and Encrypt Your Files via Windows Forms

, 22 Apr 2010 CPOL
Rate this:
Please Sign up or sign in to vote.
An article that demonstrates how to encrypt your directory files

Introduction

The purpose of this article is demonstrate how to build a Windows Forms application that encrypts files through the use of the RijndaelManaged class, a symmetric algorithm, which is used to encrypt and decrypt data by using its automatically generated Key and IV. Encryption involves the creation of a cipher (an algorithm) that takes data and a generated key as its input. The algorithm will behave in accordance with the length of the key. A symmetric algorithm is one that uses the same key to both decrypt and encrypt the data file. In our case, we will use the RSACryptoServiceProvider, an asymmetric algorithm, to encrypt and decrypt the key to the data encrypted by RijndaelManaged. Asymmetric algorithms are best used for smaller amounts of data, such as a key, as asymmetric algorithms have more overhead than symmetric algorithms. Symmetric algorithms have less overhead when generating them. As its name implies, the RijndaelManaged class is used by the .NET Framework for managed code; as a government encryption standard, this algorithm is also known as Advanced Encryption Standard, or AES. The algorithm RijndaelManaged works with a key length that ranges between 128 through 256 bits, in 32 bit increments. The term IV stands for Initialization Vector: it is the data that symmetric encryption algorithms use to further obscure the first block of data being encrypted, making unauthorized decrypting more difficult. The IV, then, gets or sets the initialization vector for the symmetric algorithm. Like the Key property, both the encryptor and the decryptor must specify the same value. The Key gets or sets the secret key pair for the symmetric algorithm. After encryption, you must store this value and transfer it to the decryptor. During decryption, you must specify the same key used for encryption. The downloadable solution files were built using Visual Studio 2010, but the code presented in the later section is constructed as one file for the command line.

The first step in this process is to make three folders: c:\docs, c:\Encrypt, and c:\Decrypt. Write out some text files and place them into the C:\docs directory. The Forms application requires six buttons, two labels, and two OpenFileDialog controls to be dragged and dropped onto the surface of the form. The AutoSize property of the first label (which goes on the top of the form) should be set to false. This will give you room to enlarge the font and change the color. This is where is the textual output appears when we click the Create Keys button. So leave the text property for the first label blank. The text for the second label should state: “Secure Your Files”. That label is also has its AutoSize property set to false.

The Source Code in One File

Notice the private methods, Encrypt and Decrypt, and the event handlers for the button controls. The Encrypt button handler invokes a method that is private to that module, as does the Decrypt method. Note that there are no user input fields in this application. We are using the OpenFileDialog controls to access files that are to be encrypted:

using System;
using System.IO;

using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Security.Cryptography;
using System.Text;
using System.Windows.Forms;

namespace Security
{
    public partial class Form1 : Form
    {        
        private System.Windows.Forms.Button buttonEncryptFile;
        private System.Windows.Forms.Button buttonDecryptFile;
        private System.Windows.Forms.Button buttonCreateAsmKeys;
        private System.Windows.Forms.Button buttonExportPublicKey;
        private System.Windows.Forms.Button buttonImportPublicKey;
        private System.Windows.Forms.Button buttonGetPrivateKey;
        private System.Windows.Forms.OpenFileDialog openFileDialog1;
        private System.Windows.Forms.OpenFileDialog openFileDialog2;
        private System.Windows.Forms.Label label1;
        private System.Windows.Forms.PictureBox pictureBox1;
        private System.Windows.Forms.Label label2;

        public Form1()
        {
            InitializeComponent();
        }

        CspParameters cspp = new CspParameters();
        RSACryptoServiceProvider rsa;

        // Path variables for source, encryption, and
        // decryption folders. Must end with a backslash.
        const string EncrFolder = @"c:\Encrypt\";
        const string DecrFolder = @"c:\Decrypt\";
        const string SrcFolder = @"c:\docs\";

        // Public key file
        const string PubKeyFile = @"c:\encrypt\rsaPublicKey.txt";

        // Key container name for
        // private/public key value pair.
        const string keyName = "Key01";

         private void InitializeComponent()
         {
            this.buttonEncryptFile = new System.Windows.Forms.Button();
            this.buttonDecryptFile = new System.Windows.Forms.Button();
            this.buttonCreateAsmKeys = new System.Windows.Forms.Button();
            this.buttonExportPublicKey = new System.Windows.Forms.Button();
            this.buttonImportPublicKey = new System.Windows.Forms.Button();
            this.buttonGetPrivateKey = new System.Windows.Forms.Button();
            this.openFileDialog1 = new System.Windows.Forms.OpenFileDialog();
            this.openFileDialog2 = new System.Windows.Forms.OpenFileDialog();
            this.label1 = new System.Windows.Forms.Label();
            this.pictureBox1 = new System.Windows.Forms.PictureBox();
            this.label2 = new System.Windows.Forms.Label();
            ((System.ComponentModel.ISupportInitialize)(this.pictureBox1)).BeginInit();
            this.SuspendLayout();
            // 
            // buttonEncryptFile
            // 
            this.buttonEncryptFile.Location = new System.Drawing.Point(484, 44);
            this.buttonEncryptFile.Name = "buttonEncryptFile";
            this.buttonEncryptFile.Size = new System.Drawing.Size(125, 23);
            this.buttonEncryptFile.TabIndex = 0;
            this.buttonEncryptFile.Text = "Encrypt File";
            this.buttonEncryptFile.UseVisualStyleBackColor = true;
            this.buttonEncryptFile.Click += 
		new System.EventHandler(this.buttonEncryptFile_Click);
            // 
            // buttonDecryptFile
            // 
            this.buttonDecryptFile.Location = new System.Drawing.Point(484, 95);
            this.buttonDecryptFile.Name = "buttonDecryptFile";
            this.buttonDecryptFile.Size = new System.Drawing.Size(125, 23);
            this.buttonDecryptFile.TabIndex = 1;
            this.buttonDecryptFile.Text = "Decrypt File";
            this.buttonDecryptFile.UseVisualStyleBackColor = true;
            this.buttonDecryptFile.Click += 
		new System.EventHandler(this.buttonDecryptFile_Click);
            // 
            // buttonCreateAsmKeys
            // 
            this.buttonCreateAsmKeys.Location = new System.Drawing.Point(484, 145);
            this.buttonCreateAsmKeys.Name = "buttonCreateAsmKeys";
            this.buttonCreateAsmKeys.Size = new System.Drawing.Size(125, 23);
            this.buttonCreateAsmKeys.TabIndex = 2;
            this.buttonCreateAsmKeys.Text = "Create Keys";
            this.buttonCreateAsmKeys.UseVisualStyleBackColor = true;
            this.buttonCreateAsmKeys.Click += 
		new System.EventHandler(this.buttonCreateAsmKeys_Click);
            // 
            // buttonExportPublicKey
            // 
            this.buttonExportPublicKey.Location = new System.Drawing.Point(484, 207);
            this.buttonExportPublicKey.Name = "buttonExportPublicKey";
            this.buttonExportPublicKey.Size = new System.Drawing.Size(125, 23);
            this.buttonExportPublicKey.TabIndex = 3;
            this.buttonExportPublicKey.Text = "Export Public Key";
            this.buttonExportPublicKey.UseVisualStyleBackColor = true;
            this.buttonExportPublicKey.Click += 
		new System.EventHandler(this.buttonExportPublicKey_Click);
            // 
            // buttonImportPublicKey
            // 
            this.buttonImportPublicKey.Location = new System.Drawing.Point(484, 271);
            this.buttonImportPublicKey.Name = "buttonImportPublicKey";
            this.buttonImportPublicKey.Size = new System.Drawing.Size(125, 23);
            this.buttonImportPublicKey.TabIndex = 4;
            this.buttonImportPublicKey.Text = "Import Public Key";
            this.buttonImportPublicKey.UseVisualStyleBackColor = true;

            this.buttonImportPublicKey.Click  += 
		new System.EventHandler(this.buttonImportPublicKey_Click);
            // 
            // buttonGetPrivateKey
            // 
            this.buttonGetPrivateKey.Location = new System.Drawing.Point(484, 330);
            this.buttonGetPrivateKey.Name = "buttonGetPrivateKey";
            this.buttonGetPrivateKey.Size = new System.Drawing.Size(125, 23);
            this.buttonGetPrivateKey.TabIndex = 5;
            this.buttonGetPrivateKey.Text = "Get Private Key";
            this.buttonGetPrivateKey.UseVisualStyleBackColor = true;
            this.buttonGetPrivateKey.Click += 
		new System.EventHandler(this.buttonGetPrivateKey_Click);
            
            this.openFileDialog1.FileName = "openFileDialog1";
            this.openFileDialog2.FileName = "openFileDialog2";
            this.label1.BackColor = System.Drawing.Color.Red;
            this.label1.Font = new System.Drawing.Font
	   ("Times New Roman", 21.75F, System.Drawing.GraphicsUnit.Point, ((byte)(0)));
            this.label1.Location = new System.Drawing.Point(46, 23);
            this.label1.Name = "label1";
            this.label1.Size = new System.Drawing.Size(262, 44);
            this.label1.TabIndex = 6;
            this.pictureBox1.Location = new System.Drawing.Point(101, 135);
            this.pictureBox1.Name = "pictureBox1";
            this.pictureBox1.Size = new System.Drawing.Size(165, 205);
            this.pictureBox1.TabIndex = 7;
            this.pictureBox1.TabStop = false;
            this.label2.Font = new System.Drawing.Font
	   ("Times New Roman", 18F, System.Drawing.GraphicsUnit.Point, ((byte)(0)));
            this.label2.Location = new System.Drawing.Point(52, 95);
            this.label2.Name = "label2";
            this.label2.Size = new System.Drawing.Size(214, 37);
            this.label2.TabIndex = 8;
            this.label2.Text = "Secure Your Files";
            // 
            // Form1
            // 
            this.AutoScaleDimensions = new System.Drawing.SizeF(6F, 13F);
            this.AutoScaleMode = System.Windows.Forms.AutoScaleMode.Font;
            this.BackColor = System.Drawing.Color.Cyan;
            this.ClientSize = new System.Drawing.Size(631, 395);
            this.Controls.Add(this.label2);
            this.Controls.Add(this.pictureBox1);
            this.Controls.Add(this.label1);
            this.Controls.Add(this.buttonGetPrivateKey);
            this.Controls.Add(this.buttonImportPublicKey);
            this.Controls.Add(this.buttonExportPublicKey);
            this.Controls.Add(this.buttonCreateAsmKeys);
            this.Controls.Add(this.buttonDecryptFile);
            this.Controls.Add(this.buttonEncryptFile);
            this.Name = "Form1";
            this.Text = "Form1";
            ((System.ComponentModel.ISupportInitialize)(this.pictureBox1)).EndInit();
            this.ResumeLayout(false);
        }

           [STAThread]
        static void Main()
        {
            Application.EnableVisualStyles();
            Application.SetCompatibleTextRenderingDefault(false);
            Application.Run(new Form1());
        }

     private void buttonCreateAsmKeys_Click(object sender, EventArgs e)
        {
            cspp.KeyContainerName = keyName;
            rsa = new RSACryptoServiceProvider(cspp);
            rsa.PersistKeyInCsp = true;
            if (rsa.PublicOnly == true)
                label1.Text = "Key: " + cspp.KeyContainerName + " - Public Only";
            else
                label1.Text = "Key: " + cspp.KeyContainerName + " - Full Key Pair";
        }

        private void buttonEncryptFile_Click(object sender, EventArgs e)
        {
            if (rsa == null)
                MessageBox.Show("Key not set.");
            else
            {
                // Display a dialog box to select a file to encrypt.
                openFileDialog1.InitialDirectory = SrcFolder;
                if (openFileDialog1.ShowDialog() == DialogResult.OK)
                {
                    string fName = openFileDialog1.FileName;
                    if (fName != null)
                    {
                        FileInfo fInfo = new FileInfo(fName);
                        // Pass the file name without the path.
                        string name = fInfo.FullName;
                        EncryptFile(name);
                    }
                }
            }
        }

        private void EncryptFile(string inFile)
        {
            // Create instance of Rijndael for
            // symmetric encryption of the data.
            RijndaelManaged rjndl = new RijndaelManaged();
            rjndl.KeySize = 256;
            rjndl.BlockSize = 256;
            rjndl.Mode = CipherMode.CBC;
            ICryptoTransform transform = rjndl.CreateEncryptor();

            // Use RSACryptoServiceProvider to
            // encrypt the Rijndael key.
            // rsa is previously instantiated: 
            //    rsa = new RSACryptoServiceProvider(cspp);
            byte[] keyEncrypted = rsa.Encrypt(rjndl.Key, false);

            // Create byte arrays to contain
            // the length values of the key and IV.
            byte[] LenK = new byte[4];
            byte[] LenIV = new byte[4];

            int lKey = keyEncrypted.Length;
            LenK = BitConverter.GetBytes(lKey);
            int lIV = rjndl.IV.Length;
            LenIV = BitConverter.GetBytes(lIV);

            // Write the following to the FileStream
            // for the encrypted file (outFs):
            // - length of the key
            // - length of the IV
            // - encrypted key
            // - the IV
            // - the encrypted cipher content

            int startFileName = inFile.LastIndexOf("\\") + 1;
            // Change the file's extension to ".enc"
            string outFile = EncrFolder + inFile.Substring
		(startFileName, inFile.LastIndexOf(".") - startFileName) + ".enc";

            using (FileStream outFs = new FileStream(outFile, FileMode.Create))
            {
                outFs.Write(LenK, 0, 4);
                outFs.Write(LenIV, 0, 4);
                outFs.Write(keyEncrypted, 0, lKey);
                outFs.Write(rjndl.IV, 0, lIV);

                // Now write the cipher text using
                // a CryptoStream for encrypting.
                using (CryptoStream outStreamEncrypted = 
		new CryptoStream(outFs, transform, CryptoStreamMode.Write))
                {
                    // By encrypting a chunk at
                    // a time, you can save memory
                    // and accommodate large files.
                    int count = 0;
                    int offset = 0;

                    // blockSizeBytes can be any arbitrary size.
                    int blockSizeBytes = rjndl.BlockSize / 8;
                    byte[] data = new byte[blockSizeBytes];
                    int bytesRead = 0;

                    using (FileStream inFs = new FileStream(inFile, FileMode.Open))
                    {
                        do
                        {
                            count = inFs.Read(data, 0, blockSizeBytes);
                            offset += count;
                            outStreamEncrypted.Write(data, 0, count);
                            bytesRead += blockSizeBytes;
                        }
                        while (count > 0);
                        inFs.Close();
                    }
                    outStreamEncrypted.FlushFinalBlock();
                    outStreamEncrypted.Close();
                }
                outFs.Close();
            }
        }

        private void buttonDecryptFile_Click(object sender, EventArgs e)
        {
            if (rsa == null)
                MessageBox.Show("Key not set.");
            else
            {
                // Display a dialog box to select the encrypted file.
                openFileDialog2.InitialDirectory = EncrFolder;
                if (openFileDialog2.ShowDialog() == DialogResult.OK)
                {
                    string fName = openFileDialog2.FileName;
                    if (fName != null)
                    {
                        FileInfo fi = new FileInfo(fName);
                        string name = fi.Name;
                        DecryptFile(name);
                    }
                }
            }
        }

        private void DecryptFile(string inFile)
        {
            // Create instance of Rijndael for
            // symmetric decryption of the data.
            RijndaelManaged rjndl = new RijndaelManaged();
            rjndl.KeySize = 256;
            rjndl.BlockSize = 256;
            rjndl.Mode = CipherMode.CBC;

            // Create byte arrays to get the length of
            // the encrypted key and IV.
            // These values were stored as 4 bytes each
            // at the beginning of the encrypted package.
            byte[] LenK = new byte[4];
            byte[] LenIV = new byte[4];

            // Construct the file name for the decrypted file.
            string outFile = DecrFolder + inFile.Substring
			(0, inFile.LastIndexOf(".")) + ".txt";

            // Use FileStream objects to read the encrypted
            // file (inFs) and save the decrypted file (outFs).
            using (FileStream inFs = new FileStream(EncrFolder + inFile, FileMode.Open))
            {
                inFs.Seek(0, SeekOrigin.Begin);
                inFs.Seek(0, SeekOrigin.Begin);
                inFs.Read(LenK, 0, 3);
                inFs.Seek(4, SeekOrigin.Begin);
                inFs.Read(LenIV, 0, 3);

                // Convert the lengths to integer values.
                int lenK = BitConverter.ToInt32(LenK, 0);
                int lenIV = BitConverter.ToInt32(LenIV, 0);

                // Determine the start position of
                // the cipher text (startC)
                // and its length(lenC).
                int startC = lenK + lenIV + 8;
                int lenC = (int)inFs.Length - startC;

                // Create the byte arrays for
                // the encrypted Rijndael key,
                // the IV, and the cipher text.
                byte[] KeyEncrypted = new byte[lenK];
                byte[] IV = new byte[lenIV];

                // Extract the key and IV
                // starting from index 8
                // after the length values.
                inFs.Seek(8, SeekOrigin.Begin);
                inFs.Read(KeyEncrypted, 0, lenK);
                inFs.Seek(8 + lenK, SeekOrigin.Begin);
                inFs.Read(IV, 0, lenIV);
                Directory.CreateDirectory(DecrFolder);
                // Use RSACryptoServiceProvider
                // to decrypt the Rijndael key.
                byte[] KeyDecrypted = rsa.Decrypt(KeyEncrypted, false);

                // Decrypt the key.
                ICryptoTransform transform = rjndl.CreateDecryptor(KeyDecrypted, IV)
             using (FileStream outFs = new FileStream(outFile, FileMode.Create))
                {
                    int count = 0;
                    int offset = 0;
                   int blockSizeBytes = rjndl.BlockSize / 8;
                    byte[] data = new byte[blockSizeBytes];
                  inFs.Seek(startC, SeekOrigin.Begin);
                    using (CryptoStream outStreamDecrypted = 
			new CryptoStream(outFs, transform, CryptoStreamMode.Write))
                    {
                        do
                        {
                            count = inFs.Read(data, 0, blockSizeBytes);
                            offset += count;
                            outStreamDecrypted.Write(data, 0, count);
                        }
                        while (count > 0);

                        outStreamDecrypted.FlushFinalBlock();
                        outStreamDecrypted.Close();
                    }
                    outFs.Close();
                }
                inFs.Close();
            }
        }

        private void buttonExportPublicKey_Click(object sender, EventArgs e)
        {
            Directory.CreateDirectory(EncrFolder);
            StreamWriter sw = new StreamWriter(PubKeyFile, false);
            sw.Write(rsa.ToXmlString(false));
            sw.Close();
        }

        private void buttonImportPublicKey_Click(object sender, EventArgs e)
        {
            StreamReader sr = new StreamReader(PubKeyFile);
            cspp.KeyContainerName = keyName;
            rsa = new RSACryptoServiceProvider(cspp);
            string keytxt = sr.ReadToEnd();
            rsa.FromXmlString(keytxt);
            rsa.PersistKeyInCsp = true;
            if (rsa.PublicOnly == true)
                label1.Text = "Key: " + cspp.KeyContainerName + " - Public Only";
            else
                label1.Text = "Key: " + cspp.KeyContainerName + " - Full Key Pair";
            sr.Close();
        }

        private void buttonGetPrivateKey_Click(object sender, EventArgs e)
        {
            cspp.KeyContainerName = keyName;

            rsa = new RSACryptoServiceProvider(cspp);
            rsa.PersistKeyInCsp = true;

            if (rsa.PublicOnly == true)
                label1.Text = "Key: " + cspp.KeyContainerName + " - Public Only";
            else
                label1.Text = "Key: " + cspp.KeyContainerName + " - Full Key Pair";
        }    
    }
}

It is always good practice to build the forms application, examine the object browser, and set the properties of the classes that are, in this case, controls. This file was built, however, on  the command line prompt of the .NET Framework. Here is how it looks before it is used:

1.JPG

To Create Keys, Encrypt, and Decrypt

  1. Click the Create Keys button. The label displays the key name and shows that it is a full key pair.
  2. Click the Export Public Key button. Note that exporting the public key parameters does not change the current key.
  3. Click the Encrypt File button and select a file.
  4. Click the Decrypt Filebutton and select the file just encrypted.
  5. Examine the file just decrypted.
  6. Close the application and restart it to test retrieving persisted key containers in the next scenario.

To Encrypt using the Public Key

  1. Click the Import Public Key button. The label displays the key name and shows that it is public only.
  2. Click the Encrypt File button and select a file.
  3. Click the Decrypt Filebutton and select the file just encrypted. This will fail because you must have the private key to decrypt.

This scenario demonstrates having only the public key to encrypt a file for another person. Typically, that person would give you only the public key and withhold the private key for decryption.

To Decrypt using the Private Key

  1. Click the Get Private Key button. The label displays the key name and shows whether it is the full key pair.
  2. Click the Decrypt File button and select the file just encrypted. This will be successful because you have the full key pair to decrypt.

References

  • The MSDN Library

History

  • 23rd April, 2010: Initial post

License

This article, along with any associated source code and files, is licensed under The Code Project Open License (CPOL)

Share

About the Author

logicchild
Other Pref. Trust
United States United States
I started electronics training at age 33. I began studying microprocessor technology in an RF communications oriented program. I am 43 years old now. I have studied C code, opcode (mainly x86 and AT+T) for around 3 years in order to learn how to recognize viral code and the use of procedural languages. I am currently learning C# and the other virtual runtime system languages. I guess I started with the egg rather than the chicken. My past work would indicate that my primary strength is in applied mathematics.

Comments and Discussions

 
GeneralHelp -- on How to Access and Encrypt Your Files via Windows Forms Pinmemberchigunwe18-Jan-11 23:42 

General General    News News    Suggestion Suggestion    Question Question    Bug Bug    Answer Answer    Joke Joke    Rant Rant    Admin Admin   

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.

| Advertise | Privacy | Mobile
Web02 | 2.8.141022.2 | Last Updated 23 Apr 2010
Article Copyright 2010 by logicchild
Everything else Copyright © CodeProject, 1999-2014
Terms of Service
Layout: fixed | fluid