Click here to Skip to main content
Click here to Skip to main content
Go to top

Convert any URL to a MHTML archive using native .NET code

, 3 Apr 2005
Rate this:
Please Sign up or sign in to vote.
A native .NET class for saving URLs: text-only, HTML page, HTML archive, or HTML complete.

Sample Image - MhtBuilder.gif

Introduction

If you've ever used the File | Save As... menu in Internet Explorer, you might have noticed a few interesting options IE provides under the Save As Type drop-down box:

Screenshot - Internet Explorer Save As menu

The options provided are:

  • Web Page, complete
  • Web Archive, single file
  • Web Page, HTML only
  • Text File

Most of these are self-explanatory, with the exception of the Web Archive (MHTML) format. What's neat about this format is that it bundles the web page and all of its references, into a single compact .MHT file. It's a lot easier to distribute a single self-contained file than it is to distribute a HTML file with a subfolder full of image/CSS/Flash/XML files referenced by that HTML file. In our case, we were generating HTML reports and we needed to check these reports into a document management system which expects a single file. The MHTML (*.mht) format solves this problem beautifully!

This project contains the MhtBuilder class, a 100% .NET managed code solution which can auto-generate a MHT file from a target URL, in one line of code. As a bonus, it will also generate all the other formats listed above, too. And it's completely free, unlike some commercial solutions you might find out there.

Background

I know people assume the worst of Microsoft, but the MHTML format is actually based on RFC standard 2557, compliant Multipart MIME Message (MHTML web archive). So it's an actual Internet standard! Web Archive, a.k.a. MHTML, is a remarkably simple plain text format which looks a lot like (and is in fact almost exactly identical to) an email. Here's the header of the MHT file you are viewing at the top of the page:

Screenshot - Mht file header

To generate a MHTML file, we simply merge together all of the files referenced in the HTML. The red line marks the first content block; there will be one content block for each file. We need to follow a few rules, though:

  • Use Quoted-Printable encoding for the text formats.
  • Use Base64 encoding for the binary formats.
  • Make sure the Content-Location has the correct absolute URL for each reference.

Not all websites will tolerate being packaged into a MHTML file. This version of Mht.Builder supports frames and IFrame, but watch out for pages that include lots of complicated JavaScript. You'll want to use the .StripScripts option on sites like that.

Using Mht.Builder

MhtBuilder comes with a complete demo app:

Screenshot - Mht demo application

Try it out on your favorite website. The files will be generated by default in the \bin folder of the solution. Just click the View button to launch them. Bear in mind that for the Web Archive and complete tabs, all the content from the target web page must be downloaded to the /bin folder, so it might take a little while! Although I don't provide any feedback events yet, I do emit a lot of progress feedback via the Debug.Write, so switch to the debug output tab to see what's happening in real time.

There are four tabs here, just like the four options IE provides in its Save As Type options. In MhtBuilder, these are the four methods being called, in the order they appear on the tabs:

Public Sub SavePageComplete(ByVal outputFilePath As String, Optional url As String)
Public Sub SavePageArchive(ByVal outputFilePath As String, Optional url As String)
Public Sub SavePage(ByVal outputFilePath As String, Optional url As String)
Public Sub SavePageText(ByVal outputFilePath As String, Optional url As String)

As of Windows XP Service Pack 2, HTML files opened from disk result in security blocks. In order to avoid this, we need to add the "Mark of the Web" to the file so IE knows what URL it came from, and can thus assign an appropriate security zone to the HTML. That's what the blnAddMark parameter is for; it causes the HTML file to be tagged with this single line at the top:

<!-- saved from url=(0027)http://www.codeproject.com/ -->

The other thing we need to do when saving these files is fix up the URLs. Any relative URLs such as:

<img src="/images/standard/logo225x72.gif">

must be converted to absolute URLs like so:

<img src="http://www.codeproject.com/images/standard/logo225x72.gif">

We do this using regular expressions, which gets us a NameValueCollection of all the references we need to fix. We loop through each reference and perform the fixup on the HTML string.

Private Function ExternalHtmlFiles() As Specialized.NameValueCollection
  If Not _ExternalFileCollection Is Nothing Then
    Return _ExternalFileCollection
  End If
  
  _ExternalFileCollection = New Specialized.NameValueCollection
  Dim r As Regex
  Dim html As String = Me.ToString
  
  Debug.WriteLine("Resolving all external HTML references from URL:")
  Debug.WriteLine("    " & Me.Url)
  
  '-- src='filename.ext' ; background="filename.ext"
  '-- note that we have to test 3 times to catch all quote styles: '', "", and none
  r = New Regex( _
    "(\ssrc|\sbackground)\s*=\s*((?<Key>'(?<Value>[^']+)')|" & _
    "(?<Key>""(?<Value>[^""]+)"")|(?<Key>(?<Value>[^ \n\r\f]+)))", _
    RegexOptions.IgnoreCase Or RegexOptions.Multiline)
    AddMatchesToCollection(html, r, _ExternalFileCollection)
  
  '-- @import "style.css" or @import url(style.css)
  r = New Regex( _
    "(@import\s|\S+-image:|background:)\s*?(url)*\s*?(?<Key>" & _
    "[""'(]{1,2}(?<Value>[^""')]+)[""')]{1,2})", _
    RegexOptions.IgnoreCase Or RegexOptions.Multiline)
    AddMatchesToCollection(html, r, _ExternalFileCollection)
  
  '-- <link rel=stylesheet href="style.css">
  r = New Regex( _
    "<link[^>]+?href\s*=\s*(?<Key>" & _
    "('|"")*(?<Value>[^'"">]+)('|"")*)", _
    RegexOptions.IgnoreCase Or RegexOptions.Multiline)
    AddMatchesToCollection(html, r, _ExternalFileCollection)
  
  '-- <iframe src="mypage.htm"> or <frame src="mypage.aspx">
  r = New Regex( _
    "<i*frame[^>]+?src\s*=\s*(?<Key>" & _
    "['""]{0,1}(?<Value>[^'""\\>]+)['""]{0,1})", _
    RegexOptions.IgnoreCase Or RegexOptions.Multiline)
    AddMatchesToCollection(html, r, _ExternalFileCollection)
  
  Return _ExternalFileCollection
End Function

We use a similar technique to get a list of all the files we need to download, which are then downloaded via my WebClientEx class. Why use that instead of the built in Net.WebClient? Good question! Because it doesn't support HTTP compression. My class, on the other hand, does:

Private Function Decompress(ByVal b() As Byte, _
      ByVal CompressionType As HttpContentEncoding) As Byte()

  Dim s As Stream
  Select Case CompressionType
    Case HttpContentEncoding.Deflate
      s = New Zip.Compression.Streams.InflaterInputStream(New MemoryStream(b), _
          New Zip.Compression.Inflater(True))
    Case HttpContentEncoding.Gzip
      s = New GZip.GZipInputStream(New MemoryStream(b))
    Case Else
      Return b
  End Select
  
  Dim ms As New MemoryStream
  Const chunkSize As Integer = 2048
  
  Dim sizeRead As Integer
  Dim unzipBytes(chunkSize) As Byte
  While True
    sizeRead = s.Read(unzipBytes, 0, chunkSize)
    If sizeRead > 0 Then
      ms.Write(unzipBytes, 0, sizeRead)
    Else
      Exit While
    End If
  End While
  s.Close()
  
  Return ms.ToArray
End Function

HTTP compression is a no-brainer: it increases your effective bandwidth by 75 percent by using standard GZIP compression-- courtesy of the SharpZipLib library.

Conclusion

Creating MHTML files isn't hard, but there are lots of little gotchas when dealing with HTML, regular expressions, and HTTP downloads. I tried to document all the difficult bits in the source code. I've also tested MhtBuilder on dozens of different websites so far with excellent results.

There are many more details and comments in the source code provided at the top of the article, so check it out. Please don't hesitate to provide feedback, good or bad! I hope you enjoyed this article. If you did, you may also like my other articles as well.

History

  • Sunday, September 12, 2004 - Published.
  • Monday, March 28, 2005 - Version 2.0
    • Completely rewritten!
    • Autodetection of content encoding (e.g., international web pages), tested against multi-language websites.
    • Now correctly decompresses both types of HTTP compression.
    • Supports completely in-memory operation for server-side use, or on-disk storage for client use.
    • Now works on web pages with frames and IFrames, using recursive retrieval.
    • HTTP authentication and HTTP Proxy support.
    • Allows configuration of browser ID string to retrieve browser-specific content.
    • Basic cookie support (needs enhancement and testing).
    • Much improved regular expressions used for parsing HTTP.
    • Extensive use of VB.NET 2005 style XML comments throughout.

License

This article has no explicit license attached to it but may contain usage terms in the article text or the download files themselves. If in doubt please contact the author via the discussion board below.

A list of licenses authors might use can be found here

Share

About the Author

wumpus1
Web Developer
United States United States
My name is Jeff Atwood. I live in Berkeley, CA with my wife, two cats, and far more computers than I care to mention. My first computer was the Texas Instruments TI-99/4a. I've been a Microsoft Windows developer since 1992; primarily in VB. I am particularly interested in best practices and human factors in software development, as represented in my recommended developer reading list. I also have a coding and human factors related blog at www.codinghorror.com.

Comments and Discussions

 
QuestionCan MHT library be integrate in visual basic PinmemberJennifer88823-Apr-06 4:50 
GeneralPerfect! Pinmemberlewist5731-Mar-06 9:38 
Questionhow to save local Html's into mht files Pinmemberbouha30-Mar-06 3:01 
QuestionLicense terms ? Pinmemberpblse28-Mar-06 3:52 
GeneralBig help PinmemberM3Fan18-Jan-06 14:48 
GeneralRe: Big help Pinmemberpblse28-Mar-06 5:22 
GeneralMS Word &amp; Content IDs PinmemberOliver Haskell7-Nov-05 3:02 
GeneralThis is a very cool program. PinmemberAshaman15-Sep-05 1:55 
Here's my situation, though. At my company, we send lots of HTML emails from different applications, processes, workflows, etc. Some of these emails include img tags, linking to our intranet. Since the Intranet server requires windows authentication, Windows XP SP2 pops up a login dialog whenever people open the email. Obviously, this is bad and people hate it... but they want the images and I don't want to have to collect all the generic and application specific images together in one folder just so I can turn on anonymous access for that folder to avoid the authentication prompt.
 
Another solution is to send the HTML emails as MHTML emails so that the pics are embedded. I've tried to pull your app apart, but it's VERY clear that you have put a mammoth amount of work in there and, to be honest, I'm not sure if it would be easier for me to try and write it myself.
 
Since you have done so much work and since you are the expert on your awesome app, can you enhance it so that I can pass in a string containing the full HTML and maybe a base URL path and receive the encoded MHTML as a response?
 
I certainly understand that you likely have more important things to do than solve my problems, but it'd be awfully great.
 

 
-Kevin Buchan
Generalusing pinedit Pinmemberrobinseatec29-Aug-05 18:52 
GeneralCurrentbug list Pinmemberwumpus122-Aug-05 11:11 
GeneralRe: Currentbug list PinmemberDaveDeath8-Sep-05 1:28 
GeneralRe: Currentbug list PinmemberHelenT20-Apr-06 10:48 
GeneralThank you dear Pinmembersuri197126-Jul-05 21:35 
QuestionCan not download html/mht from lowes.com Pinmembersuri197126-Jul-05 21:32 
AnswerRe: Can not download html/mht from lowes.com Pinmemberwumpus122-Aug-05 10:56 
Questionhow can i use it to convert a local html file? PinmemberWondering...4-Jul-05 5:05 
AnswerRe: how can i use it to convert a local html file? Pinmemberwumpus122-Aug-05 11:14 
Generalproblem in paging Pinmembersuresh policharla1-Jul-05 0:56 
GeneralRe: problem in paging Pinmembersuresh policharla4-Jul-05 3:19 
AnswerRe: problem in paging PinmemberBLDeam17-May-06 18:10 
QuestionParser , reverse Operation ? PinmemberRicalawaba22-Jun-05 8:50 
AnswerRe: Parser , reverse Operation ? Pinmemberfrumbert28-Jun-05 21:10 
AnswerRe: Parser , reverse Operation ? Pinmemberwumpus122-Aug-05 10:41 
AnswerRe: Parser , reverse Operation ? PinmemberDave Bacher27-Apr-06 6:53 
GeneralRe: Parser , reverse Operation ? PinmemberRicalawaba6-May-06 14:00 

General General    News News    Suggestion Suggestion    Question Question    Bug Bug    Answer Answer    Joke Joke    Rant Rant    Admin Admin   

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.

| Advertise | Privacy | Mobile
Web01 | 2.8.140916.1 | Last Updated 4 Apr 2005
Article Copyright 2004 by wumpus1
Everything else Copyright © CodeProject, 1999-2014
Terms of Service
Layout: fixed | fluid