Click here to Skip to main content
Click here to Skip to main content

How Count Sort Works

, 17 Jan 2005
Rate this:
Please Sign up or sign in to vote.
Count Sort algorithm implemented in C#.

Introduction

Count Sort is a Linear Sorting algorithm which sorts elements in O(n) time. The other common linear sorts include Bucket and Radix sorts.

What is Linear Sorting Algorithm

Linear sorting algorithm is a sorting algorithm that does not use any comparison operator (>, <, >= , <= , ==) to determine the sorting order of the elements. The sorting is achieved by acute logic build, and the overall time taken by the algorithm is hence linear.

Actually, if we contrast linear sort to other comparison sorts with respect to time, we will find that comparison sorts can do n log n at their best and exponential at worse in terms of time. The linear sort gives linear performance and thus has fine edge in time over these algorithms.

Note: Along with time, we also have to look at space/memory usage of a particular algorithm, and actually this is exactly where Linear Sort falls back as Linear Sort uses extra space.

The Internal Working of Count Sort

The Count Sort is quite simple as compared to other sorting algorithms (not even a single nested loop). I will explain the logical working of count sort, and for plainness purpose, use array data structure.

There are only two classes in the code, namely:

  • CountSort: This class contains methods Max, Count_Sort() and Display(), for finding maximum elements in array, sorting the array with Count Sort, and for displaying all the elements in the array, respectively.
  • CountSortApp: This class contains Main() method that contains CountSort class object and calls to methods of CountSort, and does nothing more.

The CountSort class has only two attributes:

class CountSort
{
    int []thearray;  // the array of unsorted elements

    int i;
    …..

Now, let's go through the constructor of CountSort.

public CountSort(int size)
{
    thearray = new int [size] ;
    Random ran = new Random();

    for(int i = 0 ; i< size; i++)
    {
        thearray[i] = ran.Next(i,i*size);
    }
}
  • The constructor takes the size of array and makes thearray of this size.
  • Initialize thearray to random numbers. First, an object of class Random is declared, i.e., ran. Its method Next(lowerbound, upperbound) is used to generate random number at each iteration and equate it to thearray [ i ]. So the thearray is filled up with random numbers.

Next is the Max() method. Actually, the sole purpose of this method is to find the maximum number in the thearray.

// Find maximum  Number in the Array 
// This will take O(n) time
private  int Max()
{
    int max = thearray[0];    // first element be the max

    for(i = 1 ; i<thearray.Length ;i++)
    {
        if (thearray[i] >  max )
        {
            // if the elemnt at index  ‘i ‘ is greater than
            //previous max , than set this value to the max
            max = thearray[i] ;
        } //end of if 

    }//end of for 

    return max;
}

Let's go through this method’s code step by step.

First, let's take the first element in the array to be the maximum number in the whole array, i.e., max = thearray[0]. Now iterate over the whole array except the first element (as we already select it as the maximum element). Whenever you find an element greater than the value contained in variable max, just replace the value of max with this value. Actually, the check if (thearray[i] > max) does the checking of element at index i with the current value of max, and in the case it is greater, replaces it with max = thearray[i].

Now we come to the Count_Sort method, which contains all the real work. First, there is the declaration for variables used by the CountSort method.

int k = Max();  // the maximum element in thearray
int []output = new int[thearray.Length];
int []temp = new int[k+1]; //For indeing up to k , we required 
                           // array of k+1
  • Declaration of variable k which holds the maximum element in thearray obtained by calling Max() method.
  • Declaration of array output of type int, equaling in size of the original array. The output array will have final sorted values, as you can see that in order to have original array sorted, you have to copy from output array to original array, i.e., thearray. I have more to say about this and other crucial facts in the last section.
  • Finally, the declaration of array temp, which will provide the indexing up to maximum value in thearray. temp array is of size k+1, since in C#, in order to have indexing up to ‘k’ we need to declare it of size k+1.

Now, we have a bunch of for loops. I will go through each of them separately, in order to clarify their functionality.

The first for loop:

for( i= 0 ; i<k+1 ; i++)
{
    temp[ i ] = 0;
}

The is initialization of the array temp to 0. Actually, this step is done in order to keep clarity and pace with the algorithm. What is done is only to make sure that every element of temp is set to zero, as this zero will play an important role later.

The second for loop:

for(i = 0 ; i<thearray.Length  ; i++)
{
    temp [  thearray [ i ]  ] = temp [ thearray [ i ]  ] + 1;
}

This loop contains some elaborate logic, worth explaining. Let's consider the original array thearray that contained values {2,1,3,2,4}. So the value of k will be 4, and we have array temp of size k+1 = 5, and an output array of size same as thearray i.e., 5. It can be shown diagrammatically as below:

Sample Image

The statement temp [ thearray [ i ] ] = temp [ thearray [ i ] ] + 1 can be broken into:

int   p  = thearray [ i ] ;
temp [ p ] = temp [ p  ] + 1 ;

The element at thearray [ i ] is saved in variable p and this value is used for indexing the array temp, and finally adding one to the value that is obtained by indexing.

In temp array, every index corresponds to the element / possible element of original unsorted array thearray. For e.g., the index number 2 in temp corresponds to the element 2 in thearray. See also that index 0 does not have corresponding element 0 in thearray. So the statement temp [ p ] +1 will actually mean that we have an occurrence element p, so increment it by one so its number of occurrences can be captured. Well, I also feel pretty much hazy, so let's take a look at what happened for different values of i and get the picture right.

For i = 0:

p  = thearray [ 0 ] ;
// this will results in  p = 2

temp [ 2 ] = temp [ 2  ] + 1 ;
// this gives  temp [ 2 ]   = 0 +1

temp [ 2 ] = 1  
 // the number 2 is occurred

Now, for i = 1:

p  = thearray [ 1 ] ;
// this will give p = 3
temp [ 3 ] = temp [ 3  ] + 1 ;
//  temp [ 3 ]   =  0+1        
// temp [ 3 ] = 1 ; // the number 3 is occurred once

Now, for i = 3:

p  = thearray [ 3 ] ;
// this will give p = 2 
temp [ 2 ] = temp [ 2  ] + 1 ;
//  temp [ 2 ]   = 1 +1 
// temp [ 2 ] = 1 ; // the number 2 is occurred twice

And so on for the other values of i. After which we have temp containing occurrences of each and every element of thearray. This is illustrated in the figure below.

Sample Image

Now, let's move to the third for loop:

for( i = 1 ; i<k+1 ; i++)
{
    temp[ i ] = temp[ i ] + temp[ i - 1];
}

The loop simply runs up to size of the array temp. The main reason of initializing i = 1 will be clear as I explain what we are trying to do in this loop. The main idea is to start with 2nd element (at index 1) of the array temp, and add all previous elements including itself (in the case of the 2nd element, these are elements at indexes 0 and 1 ), then move to next element 3rd (at index 2) and again add all previous elements including itself (in the case of the 3rd element, these are elements at indexes 0, 1 and 2), and so on till the end of array temp. Since there is no element prior to 1st element (at index 0), i is set to 1 in the start.

The temp array after execution of this loop is shown in the following figure:

Sample Image

and now the forth and final for loop:

for(i = thearray.Length-1  ;  i>=0 ; i--)
{
    output [ temp [ thearray [ i ] ] -1  ] = thearray [ i ] ;
    temp [ thearray [ i ]  ]  = temp [ thearray [ i ]  ]  - 1;
}

Now break the statement in the loop as:

int p = thearray [ i ];
temp [ p ] =  temp [ p ] - 1;

We initialize variable p with the elements of thearray one by one. Next, we use p as an index for the array temp, we get the value at that index, decrement it by 1, and then put this decremented value back in array temp at index p. (See figure below.)

Well, here is the explanation: as we are building the final sorted array in this very last loop, these statements actually occur due to the fact that the values in array temp are used by the sorted array output as an index, and the value that is just accessed by output array must be decremented by one or else we will not able to put the same elements found in the original array at consecutive locations in the final sorted array output.

This fact is demonstrated in the following figures:

For i=4:

Sample Image

For i=1:

Sample Image

When temp is not decremented by 1, note that the element 3 is inserted at index 4 again (below):

Sample Image

The final sorted array output is shown in the figure below. Also shown is the state of array temp after final step.

Sample Image

Conclusion

In this article, I have shown how to implement the Count Sort, a sorting algorithm that sorts elements in Linear Time. Well, there are other factors that one must consider before using Count Sort. The Count Sort is stable, means numbers with the values appear in the output array in the same order as they do in input array. The fact that there is no comparison used in by this algorithm makes it difficult if not impossible to use it with custom objects rather than primitive data types; and even in the case of primitive types, the algorithm can perform much worse in terms of memory usage if only single element in the input set is close to maximum range for that type.

License

This article has no explicit license attached to it but may contain usage terms in the article text or the download files themselves. If in doubt please contact the author via the discussion board below.

A list of licenses authors might use can be found here

Share

About the Author

razi bin rais

Pakistan Pakistan
No Biography provided

Comments and Discussions

 
QuestionWouldn't this be easier/faster/better? Pinmemberhafthor27-Jan-05 7:25 
GeneralCounting sort used with radix sort Pinmemberhain25-Jan-05 5:01 
GeneralNot O(n) PinmemberJames Curran19-Jan-05 5:59 
GeneralThe algorhitm is flawed Pinmemberleppie17-Jan-05 8:09 
GeneralRe: The algorhitm is flawed PinmemberSébastien Lorion17-Jan-05 9:12 
GeneralRe: The algorhitm is flawed PinmemberWoR17-Jan-05 10:45 
GeneralRe: The algorhitm is flawed PinmemberRazi Rais18-Jan-05 19:08 
GeneralRe: The algorhitm is flawed Pinmemberreinux28-Jan-05 15:22 
QuestionCountSort != BucketSort ? PinmemberSébastien Lorion17-Jan-05 7:10 
AnswerRe: CountSort != BucketSort ? PinmemberRazi Rais18-Jan-05 18:59 
GeneralRe: CountSort != BucketSort ? Pinmemberreinux8-Dec-05 17:16 

General General    News News    Suggestion Suggestion    Question Question    Bug Bug    Answer Answer    Joke Joke    Rant Rant    Admin Admin   

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.

| Advertise | Privacy | Terms of Use | Mobile
Web04 | 2.8.141220.1 | Last Updated 17 Jan 2005
Article Copyright 2005 by razi bin rais
Everything else Copyright © CodeProject, 1999-2014
Layout: fixed | fluid