Click here to Skip to main content
Click here to Skip to main content

SMTP Client with SSL/TLS

, , 17 Aug 2013 CPOL
Rate this:
Please Sign up or sign in to vote.
C++ SMTP client, support SSL and TLS encrypted connection to SMTP server


I needed to send emails in a product written in C++, so I searched the Internet and found a great article: SMTP Client written by Jakub Piwowarczyk. However, many of my clients use SMTP servers that require secure connection (TLS or SSL), and the SMTP Client does not support it. So I had to add SSL/TLS support to the CSmtp class from SMTP Client before I could use it in my product. As I was new to SSL/OpenSSL, it did take me quite some time to learn how to use it properly, and to make the code work with several popular SMTP servers. I have also seen people searching the internet looking for a C++ implementation of SMTP/SSL/TLS, but just could not find one. So I decided to share the one I wrote, in the hope that it will save people who are not familiar with SSL some time.

Note that this article does not cover the details of SMTP. Please go to the original article SMTP Client if you need to know more about SMTP.


There are 2 kinds of secure connections for SMTP, one is SSL and the other is TLS. Some SMTP servers support only one kind and some support both. Generally speaking, the port for SSL is 465, and the port for TLS is 587, but this is not always the case. In addition to the ports being different, SMTP/SSL is different than SMTP/TLS in that, SMTP/SSL negotiates an encrypted connection directly after the underlying TCP connection has been established, while SMTP/TLS requires that the client send a STARTLS command to the server before they negotiate an encrypted connection.

The steps involved in SMTP/SSL are as follows:

  1. The client connects to the server using TCP.
  2. The client negotiates an encrypted connection with the server.
  3. The server sends a welcome message using the encrypted connection to the client.
  4. The client sends a EHLO command using the encrypted connection to the server.
  5. The server responds to the EHLO command using the encrypted connection.

The steps involved in SMTP/TLS are as follows:

  1. The client connects to the server using TCP.
  2. The server sends a welcome message using the un-encrypted connection to the client.
  3. The client sends a EHLO command using the un-encrypted connection to the server.
  4. The server responds to the EHLO command using the un-encrypted connection.
  5. The client sends a STARTTLS command using the un-encrypted connection to the server.
  6. The server responds to the STARTTLS command using the un-encrypted connection.
  7. The client negotiates an encrypted connection with the server.
  8. The client sends a EHLO command using the encrypted connection to the server.
  9. The server responds to the EHLO command using the encrypted connection.

Using the Code

I have used openssl ( in the sample code. The directory "openssl-0.9.8l" in the sample code contains all the necessary header files and the two pre-built static openssl libraries. If you would also like to use this version of openssl in your code, be sure to copy the entire "openssl-0.9.8l" directory to the root directory of your project and add "openssl-0.9.8l\inc32" to "Additional Include Directories", and also add "openssl-0.9.8l\out32" to "Additional Library Directories".

If you would like to build your own openssl, please refer to for detailed instructions.

#define test_gmail_tls
    CSmtp mail;
#if defined(test_gmail_tls)
#elif defined(test_gmail_ssl)
#elif defined(test_hotmail_TLS)
#elif defined(test_aol_tls)
#elif defined(test_yahoo_ssl)
    // ......

If you use a non-privileged user account to test Yahoo, the mail will fail to send. And the error message returned by the Yahoo SMTP server is "530 Access denied: Free users cannot access this server".


  • The code does not verify the server's identity, that is, it does not check the server's certificate. This is usually not a big problem if we make sure we feed the program with correct server addresses. However, it is still worth mentioning that there is the chance that we are talking to an impersonator if we don't check the certificate.
  • You are not allowed to use the code in this article for spamming.



  • Rev 2.3, 2013/08/17

Thanks to everyone for the effective crowdsourcing! Please keep up the improvements to our library!

  • Added fix contributed GKarRacer for the improper checking of the MsgBody.size() before working with a line of the message body.
  • Moved memory allocation and checking if all attachments can be opened to before the MAIL command is issued so that if there is an issue with one of them, sending the email can be gracefully aborted without the email being sent without the attachments.
  • Changed all the sprintf commands to snprintf to add greater security. #define'd snprintf to sprintf_s for MS Visual C. Also changed most strcpy calls to snprintf since the MS Visual C version of that function strcpy_s has the arguments re-ordered so it wouldn't be possible to use it without affecting portability.
  • Added fix contributed by jcyangzh about a possible infinite loop in the SayQuit function.
  • Added fixes contributed by sbrytskyy required to make the AUTH PLAIN login work properly.
  • Rev 2.1, 2012/11/06
  • Rev 2.0, 2011/06/23
    • Added the m_bAuthenticate member variable to be able to disable authentication even though it may be supported by the server. It defaults to true so if it is not set, the library will act as it would have before the addition.
    • Added the ability to pass the security type, m_type, the new m_Authenticate flag, the login and password into the ConnectRemoteServer function. If these new arguments are not included in the call, the function will work as it did before.
    • Added the ability to pass the new m_Authenticate flag into the SetSMTPServer function. If not provided, the function will act as it would before the addition.
    • Added fixes contributed by Martin Kjallman
    • Added fixes contributed by Karpov Andrey
    • Added fixes contributed by Jakub Piwowarczyk
  • Rev 1.9, 2010/08/19
    • Added PLAIN, CRAM-MD5 and DIGESTMD5 authorization.
    • Added a DisconnectRemoteServer() function and reconfigured the Send() function such that if you have already called the ConnectRemoveServer() function, it will use the existing connection and leave the connection open. This allows you to call ConnectRemoteServer(), then send multiple messages on the same connection. If this approach is used, you have to call DisconnectRemoteServer() to close the connection. If you call Send() without calling ConnectRemoteServer(), it will close the connection after sending. This change should be fully backward compatible.
  • Rev 1.8, 2010/08/09
  • 2010/08/03
    • Modified Introduction
  • 2010/08/02
    • Added note
  • 2010/08/01
    • Initial post


This article, along with any associated source code and files, is licensed under The Code Project Open License (CPOL)


About the Authors

David Johns
Web Developer
United States United States
No Biography provided

Software Developer
China China
No Biography provided

Comments and Discussions

QuestionTLS/SSL Memory Leak? Pinmembermojaverider22312-Feb-13 6:34 
AnswerRe: TLS/SSL Memory Leak? PinmemberDavid Johns12-Feb-13 13:41 
GeneralRe: TLS/SSL Memory Leak? Pinmembermojaverider22313-Feb-13 4:46 
GeneralRe: TLS/SSL Memory Leak? PinmemberDavid Johns13-Feb-13 15:18 
Questionproblem with Pinmemberludohavil8-Jan-13 11:30 
AnswerRe: problem with Pinmembermalaka18-Feb-13 14:02 
GeneralRe: problem with Pinmemberludohavil13-Feb-13 12:24 
Bugfixed CRAM-MD5 Pinmemberludohavil8-Jan-13 11:27 
GeneralRe: fixed CRAM-MD5 PinmemberDavid Johns13-Feb-13 15:54 
GeneralRe: fixed CRAM-MD5 Pinmemberludohavil14-Feb-13 6:28 
BugFixed AUTH PLAIN Pinmemberludohavil8-Jan-13 11:26 
GeneralRe: Fixed AUTH PLAIN PinmemberDavid Johns13-Feb-13 15:56 
GeneralRe: Fixed AUTH PLAIN Pinmemberludohavil14-Feb-13 6:27 
Bugexception in SayQuit could lead to infinite loop. Pinmemberjcyangzh13-Dec-12 18:05 
If there is a exception in SayQuit.RecieveResponse, the outer most exception handler would be called, which would then unwind the CSmtp object. Then the desstructor would be called, but m_bConnected was not set to false(it was setted after RecieveResponse), so the destrutor would call DisconnectRemoteServer...
Finally, the application will crash.
GeneralRe: exception in SayQuit could lead to infinite loop. PinmemberDavid Johns16-Dec-12 11:24 
GeneralRe: exception in SayQuit could lead to infinite loop. Pinmemberjcyangzh16-Dec-12 17:22 
Questionhow to add a socket proxy class on it? so that I can set socket4/5 proxy when I send email? PinmemberASERERTA@#@s25-Nov-12 3:53 
Questionlooks like a bug in plain auth [modified] Pinmembersbrytskyy21-Nov-12 1:55 
AnswerRe: looks like a bug in plain auth PinmemberDavid Johns3-Dec-12 16:18 
GeneralI have some changes for OS X use. PinmemberDavembg19-Nov-12 9:26 
GeneralRe: I have some changes for OS X use. PinmemberDavid Johns3-Dec-12 1:56 
GeneralMy vote of 5 PinmemberMichael Haephrati מיכאל האפרתי6-Nov-12 8:21 
QuestionPerfect for my needs. One issue PinmemberMember 95677173-Nov-12 8:11 
QuestionProgram crashes sometimes PinmemberMember 953694724-Oct-12 7:43 
AnswerRe: Program crashes sometimes PinmemberMember 953694724-Oct-12 8:21 
GeneralRe: Program crashes sometimes PinmemberDavid Johns26-Oct-12 2:09 
GeneralRe: Program crashes sometimes PinmemberMember 953694726-Oct-12 4:09 
GeneralRe: further info PinmemberMember 953694726-Oct-12 6:16 
GeneralRe: further info PinmemberDavid Johns3-Nov-12 10:30 
QuestionDoes not work when GMAIL is setup with 2 factor authentication PinmemberRichmond Umagat20-Oct-12 18:28 
GeneralWorking well with Visual C++ 2010 PinmemberTiago Mielczarski Germano16-Oct-12 12:06 
QuestionAwesome code Pinmemberaldur_disciple25-Sep-12 22:51 
QuestionCompiling code in VC++ 6.0 Pinmembersantu10-Sep-12 0:27 
AnswerRe: Compiling code in VC++ 6.0 Pinmembervaibhavbvp10-Sep-12 23:40 
Questionwith qq or 163 to send mail failed Pinmemberjeansea19-Jul-12 17:48 
GeneralMy vote of 5 Pinmembergndnet12-Jul-12 5:56 
GeneralMy vote of 5 Pinmembergndnet29-Jun-12 15:35 
Questionwell done PinmemberEvren Daglioglu28-Jun-12 1:44 
QuestionHow to embed image file into message? PinmemberHimanshu Manjarawala31-May-12 21:03 
AnswerRe: How to embed image file into message? PinmemberAlan P Brown1-Jun-12 0:40 
QuestionWant Dynamic Link Library for this code PinmemberHimanshu Manjarawala30-May-12 2:03 
QuestionIs it support Unicode? [modified] PinmemberHimanshu Manjarawala25-May-12 1:37 
AnswerRe: Is it support Unicode? PinmemberTai khoan dang ky bang meo12-Jul-12 5:06 
Questioncrasyed while using with wrong password Pinmemberoknight11-May-12 3:22 
AnswerRe: crasyed while using with wrong password Pinmemberjeansea19-Jul-12 17:47 
GeneralRe: crasyed while using with wrong password PinmemberDavid Johns3-Nov-12 18:44 
Questionsend to multiple user Pinmemberneo.one10-May-12 8:58 
QuestionOpenssl 64 Bit Pinmembervikas.kr10-May-12 5:30 
AnswerRe: Openssl 64 Bit PinmemberJake G25-Jan-13 21:03 
QuestionThe subject contains the Chinese letters could not be sent PinmemberLeonHuang07261-May-12 17:28 

General General    News News    Suggestion Suggestion    Question Question    Bug Bug    Answer Answer    Joke Joke    Rant Rant    Admin Admin   

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.

| Advertise | Privacy | Terms of Use | Mobile
Web03 | 2.8.150327.1 | Last Updated 17 Aug 2013
Article Copyright 2010 by David Johns, John_Tang
Everything else Copyright © CodeProject, 1999-2015
Layout: fixed | fluid