Click here to Skip to main content
Click here to Skip to main content

Very simple A* algorithm implementation

, 17 Mar 2005
Rate this:
Please Sign up or sign in to vote.
Simple A* pathfinding algorithm implementation for beginners

Sample Image - pic.gif

Introduction

This is about A* algorithm implementation which is about the way how we can find a best path between two positions. I already know that there are other A* implementations in this codeproject site. They are good, but I bet this is more simple and an easy implementation for beginners to understand.

There is no unnecessary code in this implementation, I just implement the A* algorithm pseudocode step by step in very intuitive ways. As you can see in the picture above, '#' means wall, each dot means available road, and 'o' means path that AI finds.

About A* algorithm

Shorty, A* is the most popular pathfinding algorithm to go from start to goal, based on efficiency of movement cost.

You can visit A* Pathfinding for Beginners(http://www.policyalmanac.org/games/aStarTutorial.htm) to learn how this algorithm works.

You can see pseudocode for A* that I used in this implementation at Justin Heyes-Jones A* tutorial. Visit here (http://www.geocities.com/jheyesjones/pseudocode.html) to see orginal pseudocode. The print-out of this pseudocode will help you a lot to understand this implementation.

Class Design

There are three primary classes in this implementation.

  • Map - This class represents a map.
  • Node - This class represents each tile on the map. It has two primary methods.
    • CompareTo - This method allows us to decide which node is better. We can say current node is better if this method returns negative number, which means current node has lower cost than the other node being compared.
    • isMatch - This allows us to decide whether two node's geomatical positions are same or not.
  • SortedCostNodeList - This is a list that stores Node object list. We need to get off the lowest cost node from the list, so this list is implemented as sorted list order by cost value of the node, and we don't need to examine the costs of all elements in the list every time to pop the node which has the lowest cost because they are already sorted. Just pop one.This list has two primary methods.
    • push - add node elements to the list at proper position order by node cost.
    • Node's CompareTo method is used internally to sort order by cost.
      pop - just returns the lowest cost node from the list and remove it from the list.

Implementation

This is the core loop of the algorithm.

 
 ArrayList SolutionPathList = new ArrayList();

 //Create a node containing the goal state node_goal
 Node node_goal = new Node(null,null,1,15,15);
 
 //Create a node containing the start state node_start
 Node node_start = new Node(null,node_goal,1,0,0);
 

 //Create OPEN and CLOSED list
 SortedCostNodeList OPEN = new SortedCostNodeList ();
 SortedCostNodeList CLOSED = new SortedCostNodeList ();
 
 
 //Put node_start on the OPEN list
 OPEN.push (node_start);

 //while the OPEN list is not empty
 while (OPEN.Count>0)
 {
  //Get the node off the open list 
  //with the lowest f and call it node_current
  Node node_current = OPEN.pop ();

  //if node_current is the same state as node_goal we
  //have found the solution;
  //break from the while loop;
  if (node_current.isMatch (node_goal))
  {
    node_goal.parentNode = node_current.parentNode ;
    break;
  }

  //Generate each state node_successor that can come after node_current
  ArrayList successors = node_current.GetSuccessors ();
   
  //for each node_successor or node_current
  foreach (Node node_successor in successors)
  {
    //Set the cost of node_successor to be the cost of node_current plus
    //the cost to get to node_successor from node_current
    //--> already set while we were getting successors

    //find node_successor on the OPEN list
    int oFound = OPEN.IndexOf (node_successor);
     
    //if node_successor is on the OPEN list but the existing one is as good
    //or better then discard this successor and continue
  
    if (oFound>0)
    {
      Node existing_node = OPEN.NodeAt (oFound);
      if (existing_node.CompareTo (node_current) <= 0)
        continue;
    }


    //find node_successor on the CLOSED list
    int cFound = CLOSED.IndexOf (node_successor);
    
    //if node_successor is on the CLOSED list 
    //but the existing one is as good
    //or better then discard this successor and continue;
    if (cFound>0)
    {
      Node existing_node = CLOSED.NodeAt (cFound);
      if (existing_node.CompareTo (node_current) <= 0 )
        continue;
    }

    //Remove occurences of node_successor from OPEN and CLOSED
    if (oFound!=-1)
       OPEN.RemoveAt (oFound);
    if (cFound!=-1)
       CLOSED.RemoveAt (cFound);

    //Set the parent of node_successor to node_current;
    //--> already set while we were getting successors
    
    //Set h to be the estimated distance to node_goal 
    //(Using heuristic function)
    //--> already set while we were getting successors

    //Add node_successor to the OPEN list
    OPEN.push (node_successor);

   }
   //Add node_current to the CLOSED list
   CLOSED.push (node_current);
 }

Once we get to the goal, follow parent nodes to find the solution path.

 //follow the parentNode from goal to start node
 //to find solution
 Node p = node_goal;
 while(p != null) 
 {
  SolutionPathList.Insert(0,p);
  p = p.parentNode ;
 }

This A* implementation is very simple and good for beginners who want to know how A* algorithm works. Change map data in variety of ways, and check out how AI is smart to find the good path. Enjoy your programming.

License

This article has no explicit license attached to it but may contain usage terms in the article text or the download files themselves. If in doubt please contact the author via the discussion board below.

A list of licenses authors might use can be found here

Share

About the Author

seunghyop back

Korea (Republic Of) Korea (Republic Of)
Working in SK Communications,South Korea
as a web site developer.

Comments and Discussions

 
SuggestionThank you! PinmemberMember 879312930-Jul-14 18:07 
QuestionGood job PinmemberMember 1061706722-Feb-14 5:27 
General[Message Deleted] PinmemberDanny Rodriguez27-Jan-08 9:19 
GeneralI realy needed this.Thanks. Pinmembertoslavdsf329-Oct-07 14:22 
GeneralHELP W/ ROGUELIKE Pinmemberadiikan9-Oct-07 7:43 
QuestionWhat about isometric maps? Pinmemberworldspawn6913-Jul-07 17:18 
GeneralJust what I was looking for. PinmemberHenize18-Sep-06 5:27 
GeneralMapLittle Mistake PinmemberDjooneagain15-Sep-05 22:39 
GeneralAn issue in the algorithm PinmemberLynxRaven30-Mar-05 18:37 
GeneralRe: An issue in the algorithm PinmemberHyrum2-Dec-05 7:25 
GeneralCan't Download PinmemberRegina11_200018-Mar-05 9:44 
GeneralRe: Can't Download PinstaffNishant S20-Mar-05 19:10 

General General    News News    Suggestion Suggestion    Question Question    Bug Bug    Answer Answer    Joke Joke    Rant Rant    Admin Admin   

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.

| Advertise | Privacy | Mobile
Web04 | 2.8.141015.1 | Last Updated 18 Mar 2005
Article Copyright 2005 by seunghyop back
Everything else Copyright © CodeProject, 1999-2014
Terms of Service
Layout: fixed | fluid