For those new to message boards please try to follow a few simple rules when posting your question.
Choose the correct forum for your message. Posting a VB.NET question in the C++ forum will end in tears.
Be specific! Don't ask "can someone send me the code to create an application that does 'X'. Pinpoint exactly what it is you need help with.
Keep the subject line brief, but descriptive. eg "File Serialization problem"
Keep the question as brief as possible. If you have to include code, include the smallest snippet of code you can.
Be careful when including code that you haven't made a typo. Typing mistakes can become the focal point instead of the actual question you asked.
Do not remove or empty a message if others have replied. Keep the thread intact and available for others to search and read. If your problem was answered then edit your message and add "[Solved]" to the subject line of the original post, and cast an approval vote to the one or several answers that really helped you.
If you are posting source code with your question, place it inside <pre></pre> tags. We advise you also check the "Encode "<" (and other HTML) characters when pasting" checkbox before pasting anything inside the PRE block, and make sure "Use HTML in this post" check box is checked.
Be courteous and DON'T SHOUT. Everyone here helps because they enjoy helping others, not because it's their job.
Please do not post links to your question into an unrelated forum such as the lounge. It will be deleted. Likewise, do not post the same question in more than one forum.
Do not be abusive, offensive, inappropriate or harass anyone on the boards. Doing so will get you kicked off and banned. Play nice.
If you have a school or university assignment, assume that your teacher or lecturer is also reading these forums.
No advertising or soliciting.
We reserve the right to move your posts to a more appropriate forum or to delete anything deemed inappropriate or illegal.
From an Access application, I am trying to generate a ".accde"file using VBA from a ".accdb"file. I´m using the "app.SysCmd 603, INPATH, OUTPATH" method, but always returns0and do not works.
Any idea how to fix it?
NAT is super easy to setup in Linux (assuming you have a decent Linux and networking background). It's essentially already a capability built into the kernel, so you just have to configure it (no additional packages required). If it's an old machine, Linux can also make better use of available resources (i.e. not a resource hog), of course, assuming you pick a Linux distro that doesn't use a lot of resources (i.e. don't use Ubuntu w/ Unity, perhaps with MATE).
pick a Linux distro that doesn't use a lot of resources (i.e. don't use Ubuntu w/ Unity, perhaps with MATE).
I have an old broken machine that struggled with XP, installed Ubuntu server (by taking the hard disk out and putting it in another machine!) Runs apache and a few other things just fine. It's the GUI that hurts. I manage it remotely (ssh) of course.
Software rusts. Simon Stephenson, ca 1994. So does this signature. me, 2012
I'm trying to deploy ultraVNC to multiple computers, could anyone tell me what is the easiest way to deploy ultraVNC without user interaction? I've tried using /silent and /very silent switch to hide the installation box, but so far keeps coming out. Also, is there any way to bypass the UAC from prompting the logged in user to allow installation to continue? Finally, how can I copy the configuration of an already installed ultravnc to future installations?
Hello guys. I am running TCPView to show all the processes and their ports. It is showing alot of skype and other processes ( and their ports ), while I am running only one instance of it. Some processes are absolutely not running but still showing in TCPView. Why is it so?
This world is going to explode due to international politics, SOON.
1. Each process can open multiple sockets which will show up on multiple lines.
2. A process is not only a program started by you. There are also processes started by the system (e.g. services and processes started upon boot, logon, or by scheduling) and processes started by others.
VSS wasn't starting properly and SQL backups were going astray, did the usual checks and noticed that the OS partition that it was sitting on wasn't active, so without thinking I just made it active, (DELL server with a small partition marked RECOVERY that should be the active one), soon as I did it, I looked at it properly and beat my head against the desk, question is, if I just remark the RECOVERY partition as active, should that then solve it again or am I going to have to mess about with diskpart next time I reboot the damn thing?
I am trying to eliminate all compiler-warnings of a given project. I'm stuck with the warning below;
Processing COM reference "AXDBLib" from path "(somepath)axdb20enu.tlb". Interface 'IAcadShadowDisplay' is marked as [dual], but does not derive from IDispatch. It will be converted as an IUnknown-derived interface.
Ideally, I would like to understand how to rectify it, but if that is not possible, I'd like to surpress it.
After years using USB I feel really stupid asking this. My LCD connected to Arduino powered via USB started flickering after I changed PC. I checked the port (hub) and it is set to 100mA. I have no real reason to think that my hardware should be using more than 100mA, but my real question is - <b>can the USB port power setting be changed ( on XP) </b>? I think the LCD back-light LED is eating most of the power, unfortunately I cannot control its intensity. Bummer.
I have a Win8 PC with a Win7 virtual machine (VirtualBox) where I do development because we use VS 6.0. (Yes, I know, hard to believe.) Anyway, each time I do a build, I have to delete other builds, to free up disk space. It is getting to the point where soon I will have no free disk space. It looks as if Windows Updates are expanding the OS. Is there anything I can do? Is there a folder with unwanted OS update files?
I can expand the virtual disk, from the current 80GB, but that is only a temporary fix for obvious reasons. I have to have SQL server etc on the virtual machine, which take up quite a few GB.
Friends,I am working on a project....and in that project i have to take scanned image of finger with the help of fingerprint scanner.....and this image will be used as a password to log in the site.....so plzzzz..tell me how to store images in database..and how can i check the scanned image of finger of user with other scanned images
I have found that for linux it is possible to use vga, hdmi and other video connector's ddc's i2c ports to program and communicate with periphial devices. I have also found that apparently no one has been able to do it for windows, with the exception to nicomsoft. Nicomsoft has software that I have verified can read the i2c ports and not just access edid registry. I have an accelerometer connected and when I run the software it can detect a device at it's address. So I know it is possible but I have no idea if it is possible to use windows to do it. I know windows video port driver can call the miniport driver and get pointers to i2c callback structure containing explicit controls of the clock and data lines. The problem is it does not seem to export any of these pointers to anything else, like a user api let alone another kernal mode driver. I have considered that it might be possible at a hardware level were I have found out the intrcacies of the hardware, I have even seen an example of a video miniport driver on this site. I have an amd laptop which uses the bolton fusion controller hub which has vga ddc i2c ports. If you search amd docs for bolton fch you can find the documentation. basically I know the hub's i2c ports physical pins which my guess are both strung out to the hdmi and vga port's on my lap top. I have alos looked up the hub's general pupose i/o registers and it appears that they correspond to the pins. For instance ddc_i2c_scline is gpin70 and the data gpin71. the gpio registers are numbered correspondingly except the decimal pin number is changed to hexidecimal for the register. I can find the memory offset. My question is now, can I call gdi's function to map video memory to the process virtual memory, then write to these registers, turning them on and off? It is difficult to tell just what perspective on the memory I will have. Also if this worked, it would not be platform independent and would only work for pc's with bolton fusion controller hubs. Nicomsoft's program seems to be platform independent so either it wrote drivers for all common hardwares or it is using windows video port driver somehow? I have been working on this for several months and if someone could please help it would be awsome. thanks.