|
Have you considered using a reporting tool. Spending hours/days outputting lousy formatted grid content can be replaced by using SSRS fairly rapidly. With a reporting tool you get a MUCH better output and, once you get to know the tool, a much faster production.
Never underestimate the power of human stupidity
RAH
|
|
|
|
|
thanks for your fast and polite answer.
I'm a beginner in programming and I need just some help if you don't mind not some break down 
|
|
|
|
|
Can you explain me more and how can I use a reporting tool?
Thanks
|
|
|
|
|
I'm creating an application in vb.net 2013 , where i need to implement a way to read from USB barcode readers.
I've read somewhere that most of barcode readers should be treated like simple keyboards.
But this is the problem.
On my Main form , i have several textboxes.
One of them is Barcode Textbox , where a user can write the barcode manually from keyboard, or can read from barcode reader.
On other textboxes , only manual write from keyboard should be permitted and not from barcode reader.
So is there a way to make this possible ?
And if someone know this Microsoft Library : Microsoft Point of Service for .NET v1.14 (POS for .NET) from Official Microsoft Download Center[^]
Can this be a help for managing a USB Barcode Reader and to solve my problem ?
Thank you !
|
|
|
|
|
The .NET CLR abstracts keyboard devices away so that by .NET standard means you have no way of telling from which keyboard device a keypress event originated from. There's a Windows "Raw Input API" but it's not part of .NET so you would have to use P/Invoke ("DllImport") or a C++/CLI bridge if there wasn't this nice CP article (which uses P/Invoke):
Using Raw Input from C# to handle multiple keyboards[^]
A small drawback for you might be that it's written in C# but as you probably know, this doesn't stop you at all from using it in VB. I used it for exactly that purpose you're asking for.
I didn't know about that Microsoft Library you've linked. I took a look at it and at first glance, I don't think it's suitable.
If the brain were so simple we could understand it, we would be so simple we couldn't. — Lyall Watson
|
|
|
|
|
Actually , there's an article published on codeproject about that library Controlling a Barcode Reader with POS for .NET[^]
But it seems that has problems with barcode readers that are configured as a keyboard. I don't know what configuration should I make to use it.
|
|
|
|
|
To me that library is a MS documentation fail. It's not clear to me if it would simplify reading from a barcode scanner at all, with keyboard emulation or without. Instead it's something about "managing" POS devices, something I don't need if I just want to read from a barcode scanner. The Demo-App in the SDK doesn't clear things up either; I guess you already have to be an experienced POS developer to know what's what there. So for simply reading from a barcode scanner I would use the approach from the CodeProject article I linked before. It does all I need, does it well and the article explains what's going on there.
If the brain were so simple we could understand it, we would be so simple we couldn't. — Lyall Watson
|
|
|
|
|
Ok , the article that you are suggesting to use , is going to work with all kind of barcode readers , or only with those that are configured as Keyboards ?
|
|
|
|
|
The intended purpose of that article is to being able to know from which keyboard device a keypress came from. So it only works for barcode scanners with keyboard emulation. To my knowledge, that's probably all scanners in the price range up to $500 give or take. I haven't dealt with more expensive scanners yet.
If the brain were so simple we could understand it, we would be so simple we couldn't. — Lyall Watson
|
|
|
|
|
|
He writes that the CodeProject article was his starting point. So it's mostly the same thing (Raw Input API); but I haven't read it all yet so I can't say if it's in some way better than the solution of the CP article or not.
If the brain were so simple we could understand it, we would be so simple we couldn't. — Lyall Watson
|
|
|
|
|
bonjour à Tous,
sa fait longtemps que je cherche du code pour imprimer mon DataGridView complet avec visual basic 2010 express et j'ai testé tous les codes qu'ils s'affichent avec des recherches sur google mais en vain.
Mais finalement, j'ai trouver un code c# que j'ai converti en VB qui me convient parfaitement mais le seul problème c qu'il boucle infiniment ( boucle infini au niveau du nombre de pages )
NB: Le code ne génère aucune erreur
Voici mon code :
Private Sub PrintDocument1_PrintPage(ByVal sender As System.Object, ByVal e As System.Drawing.Printing.PrintPageEventArgs) Handles PrintDocument1.PrintPage
Try
Dim iHeaderHeight As Double
Dim iLeftMargin As Integer = e.MarginBounds.Left
Dim iTopMargin As Integer = e.MarginBounds.Top
Dim bMorePagesToPrint As Boolean = False
Dim iTmpWidth As Integer = 0
If bFirstPage Then
For Each GridCol As DataGridViewColumn In DataGridView_impot.Columns
iTmpWidth = CType(Math.Floor(CType((CType(GridCol.Width, Double) / (CType(iTotalWidth, Double) * (CType(iTotalWidth, Double) * (CType(e.MarginBounds.Width, Double) / CType(iTotalWidth, Double))))), Double)), Integer)
iHeaderHeight = (CType(e.Graphics.MeasureString(GridCol.HeaderText, GridCol.InheritedStyle.Font, iTmpWidth).Height, Integer) + 11)
arrColumnLefts.Add(iLeftMargin)
arrColumnWidths.Add(iTmpWidth)
iLeftMargin = (iLeftMargin + iTmpWidth)
Next
End If
Dim iRow As Double
While (iRow <= (DataGridView_impot.Rows.Count - 1))
Dim GridRow As DataGridViewRow = DataGridView_impot.Rows(iRow)
iCellHeight = (GridRow.Height + 5)
Dim iCount As Integer = 0
If (iTopMargin + (iCellHeight >= (e.MarginBounds.Height + e.MarginBounds.Top))) Then
bNewPage = True
bFirstPage = False
bMorePagesToPrint = True
Exit While
Else
If bNewPage Then
e.Graphics.DrawString(Me.lbl_rs.Text, New Font(DataGridView_impot.Font, FontStyle.Bold), Brushes.Black, e.MarginBounds.Left, (e.MarginBounds.Top - (e.Graphics.MeasureString(Me.lbl_rs.Text, New Font(DataGridView_impot.Font, FontStyle.Bold), e.MarginBounds.Width).Height - 13)))
e.Graphics.DrawString(Me.lbl_date_now.Text, New Font(DataGridView_impot.Font, FontStyle.Bold), Brushes.Black, (e.MarginBounds.Left + (e.MarginBounds.Width - e.Graphics.MeasureString(Me.lbl_date_now.Text, New Font(DataGridView_impot.Font, FontStyle.Bold), e.MarginBounds.Width).Width)), (e.MarginBounds.Top - (e.Graphics.MeasureString(Me.lbl_rs.Text, New Font(New Font(DataGridView_impot.Font, FontStyle.Bold), FontStyle.Bold), e.MarginBounds.Width).Height - 13)))
iTopMargin = e.MarginBounds.Top
For Each GridCol As DataGridViewColumn In DataGridView_impot.Columns
e.Graphics.FillRectangle(New SolidBrush(Color.LightGray), New Rectangle(CType(arrColumnLefts(iCount), Integer), iTopMargin, CType(arrColumnWidths(iCount), Integer), iHeaderHeight))
e.Graphics.DrawRectangle(Pens.Black, New Rectangle(CType(arrColumnLefts(iCount), Integer), iTopMargin, CType(arrColumnWidths(iCount), Integer), iHeaderHeight))
e.Graphics.DrawString(GridCol.HeaderText, GridCol.InheritedStyle.Font, New SolidBrush(GridCol.InheritedStyle.ForeColor), New RectangleF(CType(arrColumnLefts(iCount), Integer), iTopMargin, CType(arrColumnWidths(iCount), Integer), iHeaderHeight), strFormat)
iCount = (iCount + 1)
Next
bNewPage = False
iTopMargin = (iTopMargin + iHeaderHeight)
End If
iCount = 0
For Each Cel As DataGridViewCell In GridRow.Cells
If (Not (Cel.Value) Is Nothing) Then
e.Graphics.DrawString(Cel.Value.ToString, Cel.InheritedStyle.Font, New SolidBrush(Cel.InheritedStyle.ForeColor), New RectangleF(CType(arrColumnLefts(iCount), Integer), CType(iTopMargin, Single), CType(arrColumnWidths(iCount), Integer), CType(iCellHeight, Single)), strFormat)
End If
e.Graphics.DrawRectangle(Pens.Black, New Rectangle(CType(arrColumnLefts(iCount), Integer), iTopMargin, CType(arrColumnWidths(iCount), Integer), iCellHeight))
iCount = (iCount + 1)
Next
End If
iRow = (iRow + 1)
iTopMargin = (iTopMargin + iCellHeight)
End While
If bMorePagesToPrint Then
e.HasMorePages = True
Else
e.HasMorePages = False
End If
Catch exc As Exception
MessageBox.Show(exc.Message, "Error", MessageBoxButtons.OK, MessageBoxIcon.Error)
End Try
End Sub
|
|
|
|
|
This is an English-language site. Please edit your question and post it in English.
Ceci est un site de langue anglaise. S'il vous plaît modifier votre question et l'afficher en anglais.
(Google Translate[^])
"These people looked deep within my soul and assigned me a number based on the order in which I joined."
- Homer
|
|
|
|
|
Good morning,
Thank you Rechard 
i'm sorry, I didn't make attention to the used language
I will repost it in English
|
|
|
|
|
Hi Everyone, My xml looks like this, a single node with attributes.
<?xml version="1.0" encoding="utf-8"?>
<!--Project Time Tracking-->
<TimeTracking>
<Ticket Client="150-338" Code="Overview" Call="33685" Start_Time="1/12/2015 10:04:56 AM" Stop_Time="1/12/2015 2:09:04 PM" TimeNote="">04:04:08</Ticket>
<Ticket Client="602-501" Code="Post Go-Live Questions" Call="33480" Start_Time="1/13/2015 2:00:47 PM" Stop_Time="1/13/2015 2:30:48 PM" TimeNote="rate issues">00:30:01</Ticket>
<Ticket Client="150-315" Code="Post Go-Live Questions" Call="32641" Start_Time="1/13/2015 3:15:12 PM" Stop_Time="1/13/2015 4:45:12 PM" TimeNote="QualityOutsource issues">01:30:00</Ticket>
</TimeTracking>
My DataGridView is named Datagridview2 and is populated from a serious of different subs, below is an example:
Private Sub SelectedCode()
If Not String.IsNullOrEmpty(Me.cboTimeCode.Text) Then
DataGridView2.Columns.Clear()
DataGridView2.Rows.Clear()
Dim doc As New XmlDocument()
doc.Load("c:\myBSG\myBSGTimeclock.xml")
Dim nodeList As XmlNodeList
Dim node As XmlNode = Nothing
Dim selCode As String = Me.cboTimeCode.SelectedItem
nodeList = doc.SelectNodes(".//TimeTracking/Ticket[@Code='" & selCode & "']")
DataGridView2.Columns.Add("Client", "Client")
DataGridView2.Columns.Add("Call", "Call")
DataGridView2.Columns.Add("Code", "Code")
DataGridView2.Columns.Add("TimeNote", "TimeNote")
DataGridView2.Columns.Add("Start_Time", "Start")
DataGridView2.Columns.Add("Stop_Time", "End")
DataGridView2.Columns.Add("Duration", "Duration")
For Each node In nodeList
If InDateRange(node.Attributes("Start_Time").InnerText) = True Then
DataGridView2.Rows.Add(node.Attributes("Client").InnerText, node.Attributes("Call").InnerText, node.Attributes("Code").InnerText, node.Attributes("TimeNote").InnerText, node.Attributes("Start_Time").InnerText, node.Attributes("Stop_Time").InnerText, node.InnerText)
End If
Next
DataGridView2.Sort(DataGridView2.Columns(4), System.ComponentModel.ListSortDirection.Descending)
end sub
Now In my grid I have editmode set to EditonKeystrokeorF2 and am wanting to edit one or more cells in a "row" and using CellEndEdit, save the edited cell (or entire row) I cannot find any samples to help me with the save code.. I was thinking it would be something easy like WriteXML but that doesnt work
Any help or direction you could offer would be great. I am thinking that my problem might be that I am using nodes with multiple attributes rather that nodes with separate elements, but my lingo and thought process may be way off.
Thanks
modified 25-Jan-16 10:00am.
|
|
|
|
|
Hi,
I'm trying to set the Primary Display...without success!
Here's the code I'm working on, would you please help me see what I'm doing wrong there?
There's no compilation error...it simply doesn't give the expected result!
Thank you!!
Imports System.Runtime.InteropServices
Class MainWindow
Const CCDEVICENAME As Short = 32
Const CCFORMNAME As Short = 32
Private Const MONITORINFOF_PRIMARY As Integer = &H1
Private Const DISPLAY_DEVICE_ATTACHED_TO_DESKTOP As Integer = &H1
Private Const DISPLAY_DEVICE_PRIMARY_DEVICE As Integer = &H4
Private Const DISPLAY_DEVICE_MIRRORING_DRIVER As Integer = &H8
Private Const DISPLAY_DEVICE_VGA_COMPATIBLE As Integer = &H10
Private Const DISPLAY_DEVICE_
Private Const DISPLAY_DEVICE_MODESPRUNED As Integer = &H8000000
Private Const DM_POSITION = &H20
Private Const DM_DISPLAYORIENTATION = &H80
Private Const DM_BITSPERPEL = &H40000
Private Const DM_PELSWIDTH = &H80000
Private Const DM_PELSHEIGHT = &H100000
Private Const DM_DISPLAYFLAGS = &H200000
Private Const DM_DISPLAYFREQUENCY = &H400000
Private Const ENUM_CURRENT_SETTINGS As Integer = -1
Private Const ENUM_REGISTRY_SETTINGS As Integer = -2
Private Const EDS_RAWMODE As Integer = &H2
Private Const CDS_UPDATEREGISTRY As Integer = &H1
Private Const CDS_TEST As Integer = &H2
Private Const CDS_FULLSCREEN As Integer = &H4
Private Const CDS_GLOBAL As Integer = &H8
Private Const CDS_SET_PRIMARY As Integer = &H10
Private Const CDS_VIDEOPARAMETERS As Integer = &H20
Private Const CDS_NORESET As Integer = &H10000000
Private Const CDS_RESET As Integer = &H40000000
Private Const CDS_FORCE As Integer = &H80000000
Private Const CDS_NONE As Integer = 0
Public Structure PointL
Dim x As Integer
Dim y As Integer
End Structure
<Flags()> _
Enum DisplayDeviceStateFlags As Integer
AttachedToDesktop = &H1
MultiDriver = &H2
PrimaryDevice = &H4
MirroringDriver = &H8
VGACompatible = &H10
Removable = &H20
ModesPruned = &H8000000
Remote = &H4000000
Disconnect = &H2000000
End Enum
Const DISPLAY_PRIMARY_DEVICE = &H4
Private Structure DISPLAY_DEVICE
Public cb As Integer
<MarshalAs(UnmanagedType.ByValTStr, SizeConst:=CCDEVICENAME)> Public DeviceName As String
<MarshalAs(UnmanagedType.ByValTStr, SizeConst:=128)> Public DeviceString As String
Public StateFlags As Short
<MarshalAs(UnmanagedType.ByValTStr, SizeConst:=128)> Public DeviceID As String
<MarshalAs(UnmanagedType.ByValTStr, SizeConst:=128)> Public DeviceKey As String
End Structure
Private Structure DEVMODE
<MarshalAs(UnmanagedType.ByValTStr, SizeConst:=CCDEVICENAME)> _
Public dmDeviceName As String
Public dmSpecVersion As Short
Public dmDriverVersion As Short
Public dmSize As Short
Public dmDriverExtra As Short
Public dmFields As Integer
Public dmOrientation As Short
Public dmPositionX As Integer
Public dmPositionY As Integer
Public dmCopies As Short
Public dmDefaultSource As Short
Public dmPrintQuality As Short
Public dmColor As Short
Public dmDuplex As Short
Public dmYResolution As Short
Public dmTTOption As Short
Public dmCollate As Short
<MarshalAs(UnmanagedType.ByValTStr, SizeConst:=CCFORMNAME)> _
Public dmFormName As String
Public dmLogPixels As Short
Public dmBitsPerPel As Short
Public dmPelsWidth As Integer
Public dmPelsHeight As Integer
Public dmDisplayFlags As Integer
Public dmDisplayFrequency As Integer
Public dmICMMethod As Integer
Public dmICMIntent As Integer
Public dmMediaType As Integer
Public dmDitherType As Integer
Public dmReserved1 As Integer
Public dmReserved2 As Integer
Public dmPanningWidth As Integer
Public dmPanningHeight As Integer
End Structure
<DllImport("user32.dll")> _
Private Shared Function EnumDisplayDevices(ByVal Unused As Integer, _
ByVal iDevNum As Short, ByRef lpDisplayDevice As DISPLAY_DEVICE, ByVal dwFlags As Integer) As Integer
End Function
<DllImport("user32.dll")> _
Private Shared Function EnumDisplaySettings(ByVal lpszDeviceName As String, _
ByVal iModeNum As Integer, ByRef lpDevMode As DEVMODE) As Integer
End Function
<DllImport("user32.dll")> _
Private Shared Function ChangeDisplaySettingsEx(ByVal lpszDeviceName As String, _
ByRef lpDevMode As DEVMODE, ByVal hWnd As Integer, ByVal dwFlags As Integer, _
ByVal lParam As Integer) As Integer
End Function
<DllImport("user32.dll")> _
Private Shared Function ChangeDisplaySettingsEx(ByVal lpszDeviceName As String, _
ByRef lpDevMode As IntPtr, ByVal hWnd As Integer, ByVal dwFlags As Integer, _
ByVal lParam As Integer) As Integer
End Function
Public Sub SetAsPrimaryMonitor(id As UInteger)
Dim device = New DISPLAY_DEVICE()
Dim deviceMode = New DEVMODE()
device.cb = Marshal.SizeOf(device)
EnumDisplayDevices(Nothing, id, device, 0)
EnumDisplaySettings(device.DeviceName, -1, deviceMode)
Dim offsetx = deviceMode.dmPositionX
Dim offsety = deviceMode.dmPositionY
deviceMode.dmPositionX = 0
deviceMode.dmPositionY = 0
ChangeDisplaySettingsEx(device.DeviceName, deviceMode, 0, (CDS_SET_PRIMARY Or CDS_UPDATEREGISTRY Or CDS_NORESET), 0)
device = New DISPLAY_DEVICE()
device.cb = Marshal.SizeOf(device)
Dim otherid As UInteger = 0
While EnumDisplayDevices(Nothing, otherid, device, 0)
If device.StateFlags = DisplayDeviceStateFlags.AttachedToDesktop AndAlso otherid <> id Then
device.cb = Marshal.SizeOf(device)
Dim otherDeviceMode = New DEVMODE()
EnumDisplaySettings(device.DeviceName, -1, otherDeviceMode)
otherDeviceMode.dmPositionX -= offsetx
otherDeviceMode.dmPositionY -= offsety
ChangeDisplaySettingsEx(device.DeviceName, otherDeviceMode, 0, (CDS_UPDATEREGISTRY Or CDS_NORESET), 0)
End If
device.cb = Marshal.SizeOf(device)
otherid += 1
End While
ChangeDisplaySettingsEx(Nothing, 0, 0, CDS_NONE, 0)
End Sub
Private Sub Button1_Click_1(sender As System.Object, e As System.Windows.RoutedEventArgs) Handles Button1.Click
SetAsPrimaryMonitor(0)
End Sub
End Class
modified 19-Jan-16 5:55am.
|
|
|
|
|
Well did you step through it in the debugger and check the return values from the functions that do the work?
You need to narrow it down to exactly which function call is not working as intended.
The difficult we do right away...
...the impossible takes slightly longer.
|
|
|
|
|
It returns a 0 (DISP_CHANGE_SUCCESSFUL) !!
|
|
|
|
|
|
So I'm working on my Windows Service that sends email, in which I can read and write the parameters needed for it to communicate now.
I rewrote the service from scratch, and made 3 thread classes.
So the service runs Thread1 to test for communications and file I/O success.
Next Thread2 runs and check for jobs, if there are no jobs, it just sleeps for 15 minutes and checks again.
Finally, the jobs must be sent by Thread3 or the Await Task.
I've never done this before, this is my first time, and I want to get it right.
I did read an article about race conditions, so I can avoid that, and the principles of Threading
http://visualbasic.about.com/od/usingvbnet/a/threadingintro.htm[^]
Thread1 - Test for Communications, Sort of a systems check, Service Stops on failure.
Thread2 - Check for Jobs, if jobs exist, send email
Thread3 - Send Email
Await Task - Send Email
Now if there are jobs, I load the job and run it.
Question:
Is is stupid to load Thread3 to send the job from Thread2? Another Thread called from a Thread.
I did figure out how to stop the threads on shutdown or power down, and sleep. But I'm not sure what the best design would be.
Or should I just use Thread2 to load an Await Task, and have Thread2 monitor the progress, and wait for the Task to complete. Then Thread2 can load the next job if it exist and repeat the process again.
[Edit]
Now I have another question:
I have this thread base code that seemed pretty practical, used an online example.
I placed my job checking code in RunScheduler, and was going to place code to send the emails in StartWorkerThread. I don't get the RunPayLoad. What is Payload Code?
Public Class serviceThread_Jobs_BaseCode
Public Shared ServiceThread As Thread
Public Shared ThreadRunning As Boolean = True
Public Shared KeepRunning As Boolean = True
Private Shared PollingInterval As Integer = My.Settings.PollingInterval
Private Shared ActionInterval As Integer = My.Settings.ActionInterval
Public Shared Sub Thread_Start()
ServiceThread = New Thread(AddressOf RunScheduler)
ServiceThread.Name = "serviceThread_Jobs_BaseCode"
ServiceThread.Start()
KeepRunning = True
custom_eventLog.WriteToEventLog("serviceThread_Jobs_BaseCode - Thread_Start() has been called", 7100, EventLogEntryType.Information)
End Sub
Public Shared Sub Thread_Stop()
KeepRunning = False
custom_eventLog.WriteToEventLog(
"serviceThread_Jobs_BaseCode is stopping. " & vbCrLf & _
"Please note: the worker process will live on for up to " & _
PollingInterval / 1000 & " seconds before it terminates.",
7100
)
End Sub
Private Shared Sub RunPayload(ByVal objInput As Object)
' Write your service payload code and/or function calls here. For example:
Try
custom_eventLog.WriteToEventLog("serviceThread_Jobs_BaseCode - payload execution: " & objInput, 7100)
Catch e As Exception
custom_eventLog.WriteToEventLog("serviceThread_Jobs_BaseCode - payload execution error: " & e.Message & vbCrLf, 7200)
End Try
End Sub
Private Shared Sub RunScheduler()
Dim LastActionTime As Date = DateAdd(DateInterval.Day, -1, Date.Now)
Do While KeepRunning
If DateDiff(DateInterval.Second, LastActionTime, Date.Now) >= ActionInterval Then
LastActionTime = Date.Now
'check for posted jobs
StartWorkerThread()
End If
Thread.Sleep(PollingInterval)
Loop
End Sub
Private Shared Sub StartWorkerThread()
'Check for the Thread Stop Command and Stop Running
If (True = KeepRunning) Then
Dim WorkerThread As Thread = New Thread(AddressOf RunPayload)
' A parameter value can be transferred to the payload function via Start():
WorkerThread.Start("Hello world " & Date.Now.ToString("yyyy-MM-dd HH:mm:ss"))
Else
ThreadRunning = False
End If
End Sub
End Class
modified 14-Jan-16 14:09pm.
|
|
|
|
|
From your description it's not obvious to me why you need parallelism at all. Couldn't you just make do with a single thread that completes these steps in sequence?
If the brain were so simple we could understand it, we would be so simple we couldn't. — Lyall Watson
|
|
|
|
|
The 2nd version I wrote does it in a single task in my Windows Form App using await.
And the first version I wrote of this Windows Service does it using Main()
But the Code looked sort of sloppy and relied too heavily on timers, so I thought I'd try something different.
I guess I just wanted to learn how to use threads, and wanted to implement it in this program.
modified 14-Jan-16 14:38pm.
|
|
|
|
|
That code is using a whole thread just for the purpose of starting another thread at regular intervals and otherwise sleeping. That's awful. You could basically replace it with the code sample from the Timer Class (System.Threading)[^].
If you got a working code without threading I would use that. If it looks sloppy (like you said) I would suggest trying to improve it without introducing unnecessary parallelism. If you want to do something with Tasks/Threads in order to learn about it I would try to find some project that actually calls for it.
And I would suggest using Tasks instead of Threads: Tasks can do the same thing but better/in a more convenient way in 99% of all cases. Take a look at Sacha Barber's articles on the TPL if you haven't already: Task Parallel Library: 1 of n[^]
If the brain were so simple we could understand it, we would be so simple we couldn't. — Lyall Watson
|
|
|
|
|
I'm starting to get it now. Advice taken
|
|
|
|
|
Assuming you're sending out a (fairly) large number of emails (if not, why bother with this at all?) I think you'd do better to, as others have suggested, write it in a single thread, but then use multi-threading for the actual sending - you can send out multiple emails faster by, for example, looping through your mails and sending each out via one of, say, three threads in turn.
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
