|
In my case, the BGW services the "queue"; and is only started by the file watcher if it is not running; and quits when the queue is empty.
You could start a new task for each new file; but will it scale? (I can even "serialize" my queue if I have to).
|
|
|
|
|
I think you've lost me here. Could you provide a small sample?
If it's not broken, fix it until it is
|
|
|
|
|
|
There are lots of workable solutions.
In my case, I was using a "Concurrent Queue" to add file names to (by file watcher), and that a BGW "pops" and services. The BGW starts and stops based on entries in the queue. The queue can be serialized and reloaded at start-up; with an initial BGW started in the process.
The above scenario is used by field equipment to upload field reports to SharePoint; while online or to synch later.
|
|
|
|
|
I ran into an oddity this afternoon, what I considered a trivial task turned out to be, well, a surprise.
I have this line:
string ditto = Path.Combine("f:\\tfs", "\\SomeDir\\NewBuild", "SomeFile.abc");
And what I get is this:
Quote: \SomeDir\NewBuild\SomeFile.abc
Can someone explain to me why it does not show as:
Quote: f:\tfs\SomeDir\NewBuild\SomeFile.abc
This happens in Microsoft Visual Studio Premium 2013, Version 12.0.31101.00 Update 4.
Project uses .NET Framework 4.5
|
|
|
|
|
|
Of course... I guess Friday is a good day to be "blind" for the obvious 
Thank you
|
|
|
|
|
Hi,
class Program
{
static void Main(string[] args)
{
bool isPrime = true;
Console.WriteLine("Prime Numbers are:");
for (int i = 2; i <= 100; i++)
{
for (int j = 2; j <= 100; j++)
{
if (i != j && i % j == 0)
{
isPrime = false;
break;
}
}
if (isPrime)
{
Console.Write("\t"+i);
}
isPrime = true;
}
Console.ReadKey();
}
}
in this code,i didn't understand this line of code,Please explain me???
if (i != j && i % j == 0)
{
isPrime = false;
break;
}
what it means???
Thanks...
|
|
|
|
|
if (i != j
&&
i % j == 0)
|
|
|
|
|
|
The code:
if (i != j && i % j == 0)
{
isPrime = false;
break;
}It's a conditional statement: if the condition matches (i.e. i is not the same as j, and i is a multiple of j) then i is not prime, so it exits the inner loop - and the inner loop only. It still executes all the steps of the outer loop.
It's a very inefficient way to list all the primes up to one hundred, is all.
Bad command or file name. Bad, bad command! Sit! Stay! Staaaay...
|
|
|
|
|
Member 11161625 wrote: for (int j = 2; j <= 100; j++)
No number is ever going to be evenly divisible by anything greater than itself, so you can eliminate those numbers from your loop:
if (int j = 2; j < i; j++)
But we can do better than that.
If i is evenly divisible by a number greater than the square root of i, then it will also be evenly divisible by a corresponding number less than the square root of i. Therefore, we can ignore all numbers greater than the square root:
int squareRoot = (int)Math.Floor(Math.Sqrt(i));
for (int j = 2; j < squareRoot; j++)
But we can still do better.
Currently, you're checking for divisibility by every number in the range. But if it's not divisible by 2, then it won't be divisible by any multiple of 2. Using the Sieve of Eratosthenes[^], you can eliminate all multiples of the prime numbers, leaving just the prime numbers:
var notPrime = new HashSet<int>();
for (int i = 2; i <= 100; i++)
{
if (!notPrime.Contains(i))
{
Console.WriteLine("\t{0}", i);
for (int j = i * 2; j <= 100; j += i)
{
notPrime.Add(j);
}
}
}
There are other even more efficient ways to find prime numbers, but they tend to be much more complicated, and would be overkill for a simple scenario like this.
"These people looked deep within my soul and assigned me a number based on the order in which I joined."
- Homer
|
|
|
|
|
What this code is telling me is: since November, last year, you have racked-up a very large number of down-votes on a large number of questions in most of which you have demonstrated you have made very little effort to educate yourself.
It is time for you to make a decision to go to work doing the basic study that anyone has to do to become competent, at an entry level, in mastering any program language (or any subject matter).
When you have code like the code shown here (relatively simple), put it in a C# project, and put break-points in it, run the code, single-step through it (F11 in Visual Studio) observing how the values of variables change, and what the flow-of-control is.
Every time you see something that puzzles you like the character "%" : select the character, or whatever: hit the F1 key and go to the built-in help browser (or go-on-line and look it up) : read the relevant content, think about it.
Study, experiment, observe, refine, analyze, conclude ... repeat this forever with enthusiasm ... that is the only way to achieve any competency. CodeProject, StackOverflow, MSDN, blog sites (many exceptionally good blog sites run by Indians who are also regulars on CodeProject): these resources are amazingly deep, and can support you in whatever you pursue with C# and .NET.
Get a good fundamental book on C# .NET and read: alternate reading with trying out small code experiments directly related to what you read. Charles Petzold's ".NET Book Zero" is a free on-line download, and a good resource. Look in the "Free Tools" forum here for my previous post (January 11, 2015) on a free (English) book on C# by an association of programmers in Bulgaria.
"If not you, who ? If not now, when ?"
«In art as in science there is no delight without the detail ... Let me repeat that unless these are thoroughly understood and remembered, all “general ideas” (so easily acquired, so profitably resold) must necessarily remain but worn passports allowing their bearers short cuts from one area of ignorance to another.» Vladimir Nabokov, commentary on translation of “Eugene Onegin.”
|
|
|
|
|
Such sage advice which, being the 5th response and does not include any code will probably not have the least impact on such as the OP.
Never underestimate the power of human stupidity
RAH
|
|
|
|
|
I don't know why, Mycroft, that your comment brought to my mind Milton's great sonnet on his blindness, specifically the final line: "They also serve who only stand and wait."
"Least impact" could well describe my total presence on CodeProject
... and ... yet ...
cheers, Bill
«In art as in science there is no delight without the detail ... Let me repeat that unless these are thoroughly understood and remembered, all “general ideas” (so easily acquired, so profitably resold) must necessarily remain but worn passports allowing their bearers short cuts from one area of ignorance to another.» Vladimir Nabokov, commentary on translation of “Eugene Onegin.”
|
|
|
|
|
|
this what i have and want:
i'm working on a program (c#) that an xml file that inside have this info: action(del, add, update), tablename, records(rows).
am using EF 6.1.3 but until now i can do those action for each table but my system have more than 100 table and there a lot of code to write to make CRUD foreach table.
my question is if there is a way to make a dynamic procedure that receive a node of the xml file (any node) an process that info?
Thanks
|
|
|
|
|
You could just dynamically build the SQL query strings, although this is a method that is usually frowned upon.
Linq/EF doesn't have any built-in way of building the query dynamically as far as picking which table you're going to query. You can build everything else in the query dynamically though. To keep things simple, I'd separate these operations into different methods instead of trying to cram everything into a single method that builds any kind of query. One method per query type will make your life much easier.
|
|
|
|
|
because it is frowned upon and is not a good programming practice is that I'm looking for variants to make it, thanks for the comment. I will keep looking for another way or someone who can help me.
|
|
|
|
|
Good luck, you're going to need it. I don't know of any way of creating a LINQ query with the table name being specified dynamically.
That's why I said go with the string concatenation method.
|
|
|
|
|
Thanks, someone told me about "Reflection" i've been reading this morning about it but still am looking for. i know i have a hard mission. if i find another way i'll let you know.
|
|
|
|
|
Reflection is not going to help you in this case.
Well, more accurately, I should say that it is going GREATLY increase the level of complexity so much so as to be far more code than if you just wrote the statements using string concatenation.
|
|
|
|
|
OK, i'll follow your advice. thanks for all.
|
|
|
|
|
I'm no EF-expert but I have some experience with dynamically building query expressions. As Dave already said there's no inbuilt solution in EF for this, I'm pretty sure this would be your only alternative to constructing SQL statements:
For deletion: Build query expressions (the where-clause) dynamically using System.Linq.Expressions. Execute the query and Remove(..) the returned entities. *
For updating: Build query expressions (the where-clause) dynamically using System.Linq.Expressions. Execute the query and update the entities via Reflection. *
For adding: Create the entities via Reflection, set their properties via Reflection and Add(..) them.
For all this you would have to discover the DbSet<EntityName> -properties and Entity-types in your DbContext-class via Reflection. If the names of the properties don't exactly match those in your XML you would need to manually build a mapping dictionary.
99% sure this would work but it's a pretty big task and since (as I already saw from your last reply to Dave) you're not experienced with Reflection, I assume you would be done faster with constructing SQL statements. If you want to give this a try anyway, feel free to ask for more advice.
* Edit:
Instead of dynamically builing the query expressions you also could just "dumbly" loop over all entities in a DbSet and "scan" for those which should be deleted/updated by reading their properties with Reflection.
If the brain were so simple we could understand it, we would be so simple we couldn't. — Lyall Watson
modified 17-Feb-16 12:05pm.
|
|
|
|
|
Thanks it seems that i going to follow your advice and Dave too. I'll review my notes and make an algorithm to reach my idea with your advices.
You are right i don't know anything at all about Reflection.
Thanks again
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
