Database

Richard Andrew x649-May-14 12:26

Richard Andrew x64

9-May-14 12:26

I think the general consensus is that it makes more sense to do that kind of formatting in your report, rather than in your database query.

The difficult we do right away...
...the impossible takes slightly longer.

Richard.Berry1009-May-14 20:58

Richard.Berry100

9-May-14 20:58

Hi Richard

Thanks for your reply. In my case here, a customer was requesting a Purchase Order in pdf format, as well as Excel format. I was doing the rounding with a formula in Excel, but the formula did not always fill down to all the rows of the table which is why I decided to do the rounding in the query.

Also, quite often, in Winform apps, I pull a query into a DataTable, and set the DataTable as a DataGridView DataSource, in which case it seems more practical to do the rounding in the query as opposed to looping through the DataTable, and adding the rows with the rounded value to the DataGridView?

Andrius Leonavicius9-May-14 15:02

Andrius Leonavicius

9-May-14 15:02

Hi,

The problem is not a ROUND function, but the precision of the FLOAT data type (Using decimal, float, and real Data[^]). You have at least a couple of options:
1. Use DECIMAL or NUMERIC instead of the FLOAT.
2. CAST to DECIMAL for the calculation.

Here's the demonstration for you (using your first example):
1. Select using ROUND.

SQL

SELECT ROUND((7.5169 * 745), 3) AS Result;

SQL

SELECT ROUND(5600.0905, 3) AS Result;

Result: 5600.0910

2. Using FLOAT variables.

SQL

DECLARE @a FLOAT, @b FLOAT, @c FLOAT;
SET @a = 7.5169;
SET @b = 745;
SET @c = @a * @b;
SELECT ROUND(@c, 3) AS Result;

Result: 5600.09

3. Using DECIMAL variables.

SQL

DECLARE @a DECIMAL(18, 4), @b DECIMAL(18, 4), @c DECIMAL(18, 4);
SET @a = 7.5169;
SET @b = 745;
SET @c = @a * @b;
SELECT ROUND(@c, 3) AS Result;

Result: 5600.0910

P.S. I am posting such data with the XML pre tag. Also, I am inserting (copying) TAB characters (if needed).

Best regards,
Andrius Leonavicius

Richard.Berry1009-May-14 20:45

Richard.Berry100

9-May-14 20:45

Hi Andrius

Thanks So much.

Tested below with the same random sample of 300 values, and all agreed with the Excel Values!

SQL

select price
, qty
, price*qty as Val
, round(CONVERT(decimal(12,4),price)* CONVERT(decimal(12,4),qty),3) as RoundVal
from dbo.[round]

What mis-lead me into thinking the problem was with the type of rounding was that from my sample of 300 values, all the values that differed had a 5 in the 4th decimal place, and all the errors were not rounded as expected.

In the link you poseted:

Using float and real Data

The float and real data types are known as approximate data types. The behavior of float and real follows the IEEE 754 specification on approximate numeric data types.
...
The IEEE 754 specification provides four rounding modes: round to nearest, round up, round down, and round to zero. Microsoft SQL Server uses round up. All are accurate to the guaranteed precision but can result in slightly different floating-point values. Because the binary representation of a floating-point number may use one of many legal rounding schemes, it is impossible to reliably quantify a floating-point value.

Thanks for your help!

Fetch records efficiently

Andrius Leonavicius10-May-14 4:28

Andrius Leonavicius

10-May-14 4:28

You're welcome. Smile | :)

Best regards,
Andrius Leonavicius

avi_dadi20029-May-14 9:15

avi_dadi2002

9-May-14 9:15

My Table has millions of records and my query is fetching 500 million records for 1 day to the SSRS report. so, It is taking too long time to fetch the data. Could anybody can suggest me how to narrow down or improve my query.

Thanks in Advance,
Avinash.

Re: Fetch records efficiently

Richard Andrew x649-May-14 10:30

Richard Andrew x64

9-May-14 10:30

Without seeing the query, how can anyone suggest how to narrow it down?

The difficult we do right away...
...the impossible takes slightly longer.

Re: Fetch records efficiently

Richard MacCutchan9-May-14 21:49

Richard MacCutchan

9-May-14 21:49

avi_dadi2002 wrote:
my query is fetching 500 million records

Seriously? Try calculating how long that would take at 500 records per second.

Need to fetch from two data sources

avi_dadi20029-May-14 9:11

avi_dadi2002

9-May-14 9:11

Hi,
I need to fetch data from two different data sources in a single select query in DB2 environment. For Example.

My DB@ env has two are different data sources named as XXX5T and XXXXX5P.

Each data source(Host) has multiple databases, i want to fetch some records from two different tables, one table is available in XXX5T and 2nd one exist in XXXXX5P.

Select p,q,r from XXX5T.MyDB5T.MyTable a
INNER JOIN XXX5P.MyDB5P.MyTable b on a.id= b.id.

Thanks in advance.

Re: Need to fetch from two data sources

Richard.Berry1009-May-14 21:40

Richard.Berry100

9-May-14 21:40

Sorry - never read your question properly... (Not sure about DB2)
but in any case...

Perhaps UNION ALL is what you are looking for.
(Columns in both selects must be the same)

select p, q, r
from XXX5T.MyDB5T.MyTable

UNION ALL

select p, q, r
from XXX5T.MyDB5P.MyTable

also see Linked Servers http://msdn.microsoft.com/en-us/library/ms188279.aspx[^]

modified 10-May-14 4:08am.

SSAS Cube

Mycroft Holmes6-May-14 14:42

Mycroft Holmes

6-May-14 14:42

We have a relational DB in SQL Server 2008 which grinds up monthly data sets based on a set of criteria, these runs can take between 2 and 4 hours to produce and there may be 10-12 per month in 3-4 run sets. I am proposing that each run set has a cube for reporting and analysis.

The results are stored in 2 (fact) tables, each table has a view which pulls in the dimension fields, date, branch, product etc.

Each Run can result in +7m rows

Q1 Should I replicate the data into a reporting database before building the cube or build direct from the relational DB?

Q2 It has been recommended that I use the views, do I also need to pull in the dimension tables or can I use the fields in the view? eg Product dimension is serviced by a distinct of the Product column (answer - use the dimension table for cases where there is no record for a dimension element this period D'Oh! | :doh:

Never underestimate the power of human stupidity
RAH

Need help in forming a query

Member 99559846-May-14 0:07

Member 9955984

6-May-14 0:07

I am currently working on dash board application, I have a table say ‘User_data_master’
User_data_master(‘id’, ‘uid’, ‘data’, ‘instid’,’deptid’)
Id-primary key
uid- user id referred to user bio data
data- data posted
deptid- department id
instid- institute id
Above table will store data for different employee from different department of an institution
In select query I need to get my rows belongs to me (I have saved), Then people from my department,
Then rest of rows which belongs to my Institute.

Any help is appreciated mostly

Re: Need help in forming a query

Richard MacCutchan6-May-14 0:21

Richard MacCutchan

6-May-14 0:21

See Select ... WHERE ...[^]

Syed Rehman5-May-14 18:59

Syed Rehman

5-May-14 18:59

Hello Everyone

In my application there is a login and logout functionality.if i forget to logout and logout next day. i am unable to get the accurate difference between login and logout at backend..please can anyone help me

Thank you

Re: login and logout differenece at back end

Mycroft Holmes5-May-14 19:20

Mycroft Holmes

5-May-14 19:20

Check the DAY component of the logout datetime value!

Never underestimate the power of human stupidity
RAH

Migration error from SQL 2014 to SQL 2012

Kala Vairakkannu5-May-14 7:48

5-May-14 7:48

I have a database(Eg. SALES) in SQL Server 2014 which needs to be recreated in SQL Server 2012 version. Since I can not use the SQL 2014 back up file in SQL 2012 environment, I have proceed with the Generate Script option and trying to run the script in SQL Server 2012 environment. However it is giving an error as Msg 102, Level 15, State 6, Line 1
Incorrect syntax near 'DELAYED_DURABILITY'. which is pointing to the ALTER DATABASE [SALES] SET DELAYED_DURABILITY = DISABLED line in the script and not able to proceed further. Please help me to get this sorted out.

Thanks,
KV

Migration error from SQL 2014 to SQL 2012

ZurdoDev5-May-14 9:36

ZurdoDev

5-May-14 9:36

As mentioned in the Lounge, remove that setting as it is new to 2014.

There are only 10 types of people in the world, those who understand binary and those who don't.

Kala Vairakkannu5-May-14 7:27

5-May-14 7:27

I have a database(Eg. SALES) in SQL Server 2014 which needs to be recreated in SQL Server 2012 version. Since I can not use the SQL 2014 back up file in SQL 2012 environment, I have proceed with the Generate Script option and trying to run the script in SQL Server 2012 environment. However it is giving an error as Msg 102, Level 15, State 6, Line 1
Incorrect syntax near 'DELAYED_DURABILITY'. which is pointing to the ALTER DATABASE [SALES] SET DELAYED_DURABILITY = DISABLED line in the script and not able to proceed further. Please help me to get this sorted out.

Thanks,
Kala

modified 5-May-14 14:45pm.

Kornfeld Eliyahu Peter5-May-14 7:34

Kornfeld Eliyahu Peter

5-May-14 7:34

You are in the wrong forum!!!

Welcome to the Lounge
Technical discussions are welcome, but if you need specific help please use the programming forums.

DELAYED_DURABILITY is a 2014 only - new - feature, so 2012 do not know it...Change database compatibility to 2012 (110) and try again...

I'm not questioning your powers of observation; I'm merely remarking upon the paradox of asking a masked man who he is. (V)

ZurdoDev5-May-14 7:48

ZurdoDev

5-May-14 7:48

Correct and Correct. +5 Thumbs Up | :thumbsup:

There are only 10 types of people in the world, those who understand binary and those who don't.

Kala Vairakkannu5-May-14 8:16

5-May-14 8:16

Didn't notice the forum. Thank you.

LloydA1115-May-14 7:34

LloydA111

5-May-14 7:34

Wrong forum and,

http://mssqltrek.com/2013/12/12/delayed-durability-in-sql-server-2014-a-hidden-gem/[^]

"DELAYED_DURABILITY" was only introduced with SQL Server 2014. I don't know what the equivalent is in 2012.

    .-.
   |o,o|
,| _\=/_      .-""-.
||/_/_\_\    /[] _ _\
|_/|(_)|\\  _|_o_LII|_
   \._./// / | ==== | \
   |\_/|"` |_| ==== |_|
   |_|_|    ||" ||  ||
   |-|-|    ||LI  o ||
   |_|_|    ||'----'||
  /_/ \_\  /__|    |__\

ZurdoDev5-May-14 7:47

ZurdoDev

5-May-14 7:47

Lloyd Atkinson wrote:
I don't know what the equivalent is in 2012.

It is empty string. Smile | :)

There are only 10 types of people in the world, those who understand binary and those who don't.

Kala Vairakkannu5-May-14 8:20

5-May-14 8:20

As far as I know, there is no such property DELAYED_DURABILITY in SQL 2012. Hence removed that line and ran the query, it works fine. Not sure if this is the right approach, but just tried it out.

Thanks,
KV