 |
|
|
i don't exactly get you ; however, if i understand well, you want to know this :
let go deeper in the instruction BS_STYLE1 | BS_STYLE3 | BS_STYLE6.
firstly, we need to know what are defined those constants like.
let's consider they're declared this way :
enum {
BS_STYLE1 = 1,
BS_STYLE2 = 2,
BS_STYLE3 = 4,
BS_STYLE4 = 8,
BS_STYLE5 = 16,
BS_STYLE6 = 32
};
to understand why these constants' values are chosen, we must go in binary representation to understand :
1 -> 0b 00000000 00000000 00000000 00000001
2 -> 0b 00000000 00000000 00000000 00000010
4 -> 0b 00000000 00000000 00000000 00000100
8 -> 0b 00000000 00000000 00000000 00001000
16 -> 0b 00000000 00000000 00000000 00010000
32 -> 0b 00000000 00000000 00000000 00100000
notice that for those special values that are multiples of 2, only one bit is set at a time, all the others are equal to 0.
the interrest in this is that each bit is a flag for a functionnality (style here), and we can mix them in once variable to avoid using as many booleans as we need flags.
for example, see the following case :
0b 00000000 00000000 00000000 00100101
Flags of <code>Style6</code>, <code>Style3</code> and <code>Style1</code> are set
now, as we don't handle binary directly in C++, we use bitwise operators instead.
what you see as that vertical bar | is the bitwise OR operator.
the OR operator works like this :
x y |
--------
0 0 0
0 1 1
1 0 1
1 1 1
in the case of the instruction BS_STYLE1 | BS_STYLE3 | BS_STYLE6, it so ORs like this :
0b 00000000 00000000 00000000 00000001 <- BS_STYLE1
0b 00000000 00000000 00000000 00000100 <- BS_STYLE3
0b 00000000 00000000 00000000 00100000 <- BS_STYLE6
-----------------------------------------------
0b 00000000 00000000 00000000 00100101 <- BS_STYLE1 | BS_STYLE3 | BS_STYLE6
Now, the "mix value" is constructed, we can pass it to a function.
but how does the function know which bits are set, and which are not ?
easy... follow me !
Lets say we want to know if the bit of BS_STYLE1 is set from the mix we get in parameter (let's call it MIX_VAR.
we must create a maskwhich we'll AND with the :
STYLE1_MASK = 0b 00000000 00000000 00000000 00000001
as you see, the mask is the same as the STYLE constant, so in practice, you'll never see defined such mask :
MIX_VAR -> 0b 00000000 00000000 00000000 00100101
MASK1 -> 0b 00000000 00000000 00000000 00000001
----------------------------------------
<code>Bitwise AND</code> 0b 00000000 00000000 00000000 00000001
if the result is equal to the STYLE1, then it is because the bit was set. otherwise, you get 0.
ok, now, in practice, here is how you'll often see it :
void fooFunc(DWORD dwMix) {
if (BS_STYLE1 & dwMix) == BS_STYLE1) {
}
else if (BS_STYLE2 & dwMix) == BS_STYLE2) {
}
else if (BS_STYLE3 & dwMix) == BS_STYLE3) {
}
}
wow, that's very long finally... hum, well, i hope it will help, truly !  ![Rose | [Rose]](/script/Forums/Images/rose.gif)
|
|
|
|
|
|
|
Nice !
VuNic
|
|
|
|
|
|
|
Excellent explanation!
Why is common sense not common?
Never argue with an idiot. They will drag you down to their level where they are an expert.
|
|
|
|
|
|
|
i think you should write an article on this thanks
|
|
|
|
|
|
|
ok, in the todo list 
thanks
|
|
|
|
|
|
|
Hi there!
I am using PJ Naughter's CSMTPConnection v1.36 in my application and I cant send mails to yahoo, gmail and other, I can only send mails that are the same type like mine.Which server do I have to use to send mails to anyone I want?
Please help!
Thanx
|
|
|
|
|
|
|
Have you tried posing this question here, or downloading the latest version from here? Do you have access to an SMTP server?
Oliver Shikaloski wrote: ...I can only send mails that are the same type like mine.
Do you mean in your same domain?
"Let us be thankful for the fools. But for them the rest of us could not succeed." - Mark Twain
"There is no death, only a change of worlds." - Native American Proverb
|
|
|
|
|
|
|
Yes in the same domain.I got the version from CodeProject and like i said ,I cant send mail on other domains,except on mine.How do I fix this problem?
Thanx
|
|
|
|
|
|
|
oliver_mak wrote: How do I fix this problem?
By trying my other three suggestions perhaps.
"Let us be thankful for the fools. But for them the rest of us could not succeed." - Mark Twain
"There is no death, only a change of worlds." - Native American Proverb
|
|
|
|
|
|
|
Hello
I have Visual studio 2005. I have created a Win32app project with a dialogbox containing a treeview control. As I would like to have the dialogbox in the client part of my window i have added the handle of WM_CREATE message in the MainWndProc like this :
switch (message)
{
HANDLE_MSG(hWnd, WM_CREATE, WndProc_OnCreate);
and I have wrote :
BOOL WndProc_OnCreate(HWND hwnd,LPCREATESTRUCT ct)
{
HWND g_hViewDir;
g_hViewDir = CreateDialog(hInst, MAKEINTRESOURCE(IDD_SHOWDIR), hwnd, ShowdirDlgProc);
if(g_hViewDir != NULL)
{
...
}
else
return FALSE;
return TRUE;
}
No compilation error. When i launch the app the dialog does not appear. I have investigate and found that the error message comes out of the CreateDialog function and says : Error 1407 : Unknown window Class  ????
Could someone help.
|
|
|
|
|
|
|
Check your linking into the Common Control library comctrl32.lib and calling InitCommonControlsEx[^] to initialize the library, finally also check your passing ICC_TREEVIEW_CLASSES as a flag so it knows to load the correct classes.
Gavin Taylor
w: http://www.gavspace.com
|
|
|
|
|
|
|
Thanks a lot that solved my problem. But in the documentation of InitCommonControlsEx it says that it is not necessary to use it if we use a manifest. In that case i do not understand.
|
|
|
|
|
|
|
Hi together,
I have a big problem. I hope somebody can help me:
I implemented a service that runs under the local system account and checks if any screen blanker is activated. I use the following code:
bool result = false;
SystemParametersInfo(SPI_GETSCREENSAVEACTIVE, 0, (LPVOID) &result, 0); This works fine on Win XP, but on Win 2000 the function always return true. It is a known bug according to article number 318781 on MSDN.
The suggested workaround is to look for the entry "SCRNSAVE.EXE" under the registry key "HKCU\Control Panel\Desktop" using the following two lines:
RegOpenKeyEx(HKEY_CURRENT_USER, "Control Panel\\Desktop", 0, KEY_READ, &hKeyScrSave);
RegQueryValueEx(hKeyScrSave, "SCRNSAVE.EXE", NULL, NULL, (LPBYTE) szData, &dwData); Now the problem arises: As my service runs under the local system account, access to "HKEY_CURRENT_USER" is redirected to "HKEY_USERS\.DEFAULT". 
So the result refers to the logon screen saver, which is (usually) always activated. But I only want this result if no user in logged in.
Therefore my question: Does anybody has a solution, how to check if a screen saver is active under 2000 like SystemParametersInfo(SPI_GETSCREENSAVEACTIVE) does it for XP? An idea how to access data under "HKEY_CURRENT_USER" from the local system account would also be very valuable for me.
Thank you very much for any hints,
Marcus.
|
|
|
|
|
|
|
Two quick things - first SystemParametersInfo(...) does not use C++ types, so you should be passing the address of a BOOL (an int, or 4-bytes under 32-bit MS), not a bool (1-byte under 32-bit MS).
Second, I am pretty sure that screen savers run on a separate desktop, the "screen saver desktop". Search MSDN for information on Window Stations and Desktops for more information.
If I am correct, you might be able to determine which desktop is active, and from that determine if a screen saver is running.
Peace!
-=- James
If you think it costs a lot to do it right, just wait until you find out how much it costs to do it wrong!
Avoid driving a vehicle taller than you and remember that Professional Driver on Closed Course does not mean your Dumb Ass on a Public Road!
DeleteFXPFiles & CheckFavorites (Please rate this post!)
|
|
|
|
|
|
|
Hi James,
thank you very much for your reply!
Concerning the bool/BOOL issue: I'm actually using a BOOL. In my message, however, I cut & pasted the code from MSDN, which seems to contain several bugs/typos  Anyway, thanks for the hint.
Concerning the desktop issue: I think you are right. Some time ago I've read that the screen saver runs on another desktop. So I'll dig into that again
Thank you again,
Marcus.
|
|
|
|
|
|
|
khb wrote: SystemParametersInfo(SPI_GETSCREENSAVEACTIVE, 0, (LPVOID) &result, 0);
I think you want to check SPI_GETSCREENSAVERRUNNING instead.
khb wrote: Now the problem arises: As my service runs under the local system account, access to "HKEY_CURRENT_USER" is redirected to "HKEY_USERS\.DEFAULT".
See MSDN article Q168877 for an example.
"Let us be thankful for the fools. But for them the rest of us could not succeed." - Mark Twain
"There is no death, only a change of worlds." - Native American Proverb
|
|
|
|
|
|
|
Hi David,
I think that what I posted was correct. I want to check if a user has "installed" a screen saver so that I can expect that there is a change that it will start running somewhen. Anyway, I check if it is actually running, too.
The howto on Q168877 seems to be exactly what I was looking for, great!
Thank you,
Marcus.
|
|
|
|
|
|
|
Hi,
I am creating an array of pointers that point to unsigned char arrays like so
unsigned char* data[3];
where
data[0] = new unsigned char[256];
data[1] = new unsigned char[256];
data[2] = new unsigned char[256];
I now want to return this pointer array data from one function. How can I do that? Or what way could I return data[0], data[1] and data[2]?
Thanks for any help cause am a bit stuck here
|
|
|
|
|
|
|
You can't return an array - If you burry it in a stuct you can work around this. i.e.
struct MyData
{
unsigned char* data[3];
};
MyData Function()
{
MyData md;
return md;
}
Steve
|
|
|
|
|
|
|
Oh ok! Thanks.
I will call that function in a different class though. So do I have to define another struct (lets call it MyData') and then lets say
void callFunction
{
md'.data[3]=Class::Function;
...}
How would I go about getting data[0], data[1] and data[2] then? Sorry just a bit confused as its like arrays, pointers and structs and am quite new to this.
Thanks in advance for any help!
|
|
|
|
|
|
|
Code like this:
MyData d1, d2;
d1 = d2;
Copies dt.data[0], dt.data[1] and dt.data[2] (and all the rest if any).
Steve
|
|
|
|
|
|
|
you'll have to create the MyData::operator = () member for this, otherwise, it will only copy the addresses, not the array contents...
|
|
|
|
|
|
|
The question said, "return this pointer array" - I believe it's the addresses that he wants copied - Although it wasn't clearly stated.
Steve
|
|
|
|
|
|
|
Stephen Hewitt wrote: Although it wasn't clearly stated
agreed
|
|
|
|
|
|
|
your code is incorrect because you return a local object...
>> You can't return an array
yes we can, by returning the pointer... it is exactly the same when you pass arrays as parameters to functions.
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Rant 
Admin