Click here to Skip to main content
15,860,972 members
Articles / Mobile Apps

Automatically Starting Your Application on Windows Mobile

Rate me:
Please Sign up or sign in to vote.
4.92/5 (26 votes)
31 Jul 2008CPOL10 min read 216.2K   2.4K   135   31
An article discussing the various methods that you can use to automatically start an application on Windows Mobile, either by schedule or in reaction to a system event.

Introduction

Figuring out how to make an application automatically start up had long been a mystery to me. The information was scattered, and a bit of research was needed to collect all of it. During my research, I placed all of my notes in various documents, and have decided to organize them into a single document and share with all. The information presented here was tested on Windows Mobile 5 and Windows Mobile 6 devices, but can also be applied to several versions of Windows CE (the OS from which Windows Mobile is derived).

It's possible to achieve similar functionality by making your own executable that watches system changes through the SystemState class and responding accordingly, but that would cause your program to have a larger footprint.

About the code

The first methods of automatically starting a program are centered in what I will call configuration tasks; making shortcuts, Registry entries, or placing files in specific locations. For these methods, I do not provide code examples. Later within this article, I discuss methods for automatically launching applications that are setup through code. For these methods, I have included example code within the article, and full source attached to the article.

The code examples rely on some Win32 functions that are called through P/Invoke. Both code examples refer to a project named Win32 which contains the references to these functions. Additionally, Win32 also contains a structure and an enumeration needed to properly pass information to the WinAPI functions. To run the code examples, you will need a Windows Mobile device (or emulator) and Visual Studio 2008.

Remember that on Windows Mobile devices, you should prevent more than one instance of your program from existing in memory (if a second instance is started, it should notify the first instance and then immediately terminate).

What is meant by “auto-start”?

When I use the phrase auto-start, I use it to refer to the launching of any program based on an event (other than the user clicking on the program’s icon). A program can be automatically started in one of four ways:

  • A program on a memory card runs as soon as the card is inserted
  • A program is scheduled to start at a predetermined time
  • A program is launched in response to a system change
  • A program launches at device power up

Auto-Run from a memory card

The user inserting a memory card can cause an application to launch in one of two ways. The memory card could have a program on it that launches upon insertion, or the Windows Mobile device could start a program that is already present in its main storage in response to the memory card being inserted. The latter would be implemented by registering an application to start on a system change (discussed later).

When a memory card is inserted into a Windows Mobile / Windows CE device, the OS automatically looks in a certain folder for a program named Autorun.exe. If that program is found, then it is immediately run. The folder in which the OS looks is going to depend on what type of processor the device has. For an overwhelming majority of Windows Mobile devices, that folder will be “/2577”. Here is a table of the possible folder names for other Windows CE devices:

ProcessorFolder Name
ARM 7201824
Arm 8202080
ARM 9202336
ARM 7TDMI70001
Hitachi SH310003
Hitachi SH3E10004
Hitachi SH410005
Motorola 821821
SH3103
SH4104
Strongarm2577

f you already have an application on a memory card that you wanted to auto-run, but you did not want to rename the executable or place it in this folder, then you can always make a second executable whose purpose is to launch your first executable.

Startup shortcut

A shortcut can be made to an application that you wish to startup automatically, and placed in \Windows\StartUp. Use this method if you have a single executable that needs to be started that has no dependencies on other executables. The format of shortcuts on Windows Mobile devices is simple. It will always be in the form 00#"<\program Files\path>", where 00 is replaced with the number of characters that appear after the ‘#’ sign; the ‘#’ is a delimiter, and then the complete path to the executable. The following is an example of a shortcut to Windows Media Player:

23#"\windows\wmplayer.exe"

You don't have to manually create the shortcut though. There is a native API call SHCreateShortcut that will create a shortcut for you. The first argument is the full path to the shortcut to be created, and the second argument is the full path to the file to which the shortcut points to.

Starting an application at bootup

For Windows Mobile devices, the location for auto-start entries is HKEY_LOCAL_MACHINE\Init. Unlike the startup entries on a desktop machine (which only require the path to the executable to start), the entries for Windows Mobile devices are a little more structured. There are two keys associated with an application that needs to start up automatically, a LaunchXX key and an optional DependXX key. The XX would be replaced with a number. This number is also called the sequence number. The value of LaunchXX is a string value (REG_SZ) that contains the path to the executable to be started. The DependXX key is used to specify on what applications the current application has dependencies (and thus in what order the applications must be launched). The DependXX key contains a list of word (2 byte) values that contain the sequence number values of the required applications.

The following screenshot is of the Registry on my Windows Mobile 5 phone. Launch21 refers to an application named “coldinit”. If we look at Depend21, we see that “coldinit.exe” has a dependency on an application identified by 0x14 (20 decimal). So, “coldinit.exe” must be launched after the app identified in Launch20, “Device.exe”.

Screen shot of Windows Mobile Registry

Applications launched using this method must notify the application of successful startup by calling the SignalStarted(DWORD) function. This function is a native call. For C programs, the header to this function is defined in Winbase.h and in the library Coredll.lib. Developers using managed code will need to P/Invoke this method. The function's only argument is the sequence number of the executable. The sequence number is passed to the application as its only command argument. Note that the sequence number is the only argument that the application will be able to receive through the command line arguments. Any other information that must be passed to the application should be passed through configuration files or Registry keys.

Starting a program at a specified time

The Windows CE / Windows Mobile OS contains functionality for automatically starting a program at a specified time. The functionality is available through a call to CeRunApAtTime from the CoreDLL library. As mentioned by Jim Wilson in many of his “How Do I” video posts on MSDN, this function expects the start time to be specified in the WinAPI SystemTime structure instead of the DateTime structure (CeRunAppAtTime is an unmanaged function called using the platform invoke functionality). Converting a time from a DateTime to a SystemTime is not difficult; there are WinAPI functions that doed this for you. To make calling this function easier, I have placed the following code in my Win32Helper class. I’ve also provided an overloaded function to allow the time to be passed as an offset from the current time with a TimeSpan object.

C#
public static void RunAppAtTime(string applicationEvent, DateTime startTime)
{
    long fileTimeUTC = startTime.ToFileTime();
    long fileTimeLocal = 0 ;
    SystemTime systemStartTime = new SystemTime();
    CoreDLL.FileTimeToLocalFileTime(ref fileTimeUTC, ref fileTimeLocal);
    CoreDLL.FileTimeToSystemTime(ref fileTimeLocal, systemStartTime);
    CoreDLL.CeRunAppAtTime(applicationEvent, systemStartTime);
}
public static void RunAppAtTime(
     string applicationEvent, 
     TimeSpan timeDisplacement
)
{
    DateTime targetTime = DateTime.Now + timeDisplacement;
    RunAppAtTime(applicationEvent, targetTime);
}

applicationEvent is the full path to the application to start and startTime is the time at which the application should be executed. There’s also an overloaded version of the method that accepts a TimeSpan object instead of a DateTime, if you want to specify the start time relative to the current time.

If an application were attempting to schedule itself to be restarted at a later time, it will need to be able to pass its complete path. I used Reflection to find that path.

C#
Module[] m = this.GetType().Assembly.GetModules();
target = m[0].FullyQualifiedName;

Screenshot of timed start program

Running the program because of a system change

There are a number of system changes that can be used to trigger the execution of a program. The WinAPI function CeRunAppAtEvent is used to associate a program with an event. Once associated, that program will be launched every time that the event occurs! So, you must also remember to disassociate the program with the event when you no longer want it to automatically start.

I have created an enumeration in the Win32 class named WhichEvent that contains the ID numbers for the events that can be used to trigger program execution.

When a program is started because of a change in system state, a single argument is passed to the program to indicate the state change that triggered the program's execution. (I don't discuss the details of how to do that here). For a complete list of the possible arguments, see the example code in AutoStartArgumentString.cs.

Enumeration ElementDescription

NOTIFICATION_EVENT_NONE

Used to clear all events associated with a program

NOTIFICATION_EVENT_TIME_CHANGE

NOTIFICATION_EVENT_SYNC_END

ActiveSync synchronization has completed on the device

NOTIFICATION_EVENT_ON_AC_POWER

The unit’s charger is connected

NOTIFICATION_EVENT_OFF_AC_POWER

The unit’s charger is disconnected

NOTIFICATION_EVENT_NET_CONNECT

The device is connected to a network

NOTIFICATION_EVENT_NET_DISCONNECT

The device is disconnected from a network

NOTIFICATION_EVENT_DEVICE_CHANGE

A memory card or other device was inserted or removed

NOTIFICATION_EVENT_IR_DISCOVERED

The device has detected another infrared device

NOTIFICATION_EVENT_RS232_DETECTED

The device has been connected to an RS232 device

NOTIFICATION_EVENT_RESTORE_END

A full restore of the device has completed

NOTIFICATION_EVENT_WAKEUP

The device has come out of a suspended state

NOTIFICATION_EVENT_TZ_CHANGE

The time zone of the device has changed

NOTIFICATION_EVENT_MACHINE_NAME_CHANGE

The name of the device has changed

I have created a class simply named Core for declaring platform invoked methods from the CoreDLL.dll library, and declared the CeRunApAtEvent function within it. The following schedules the Windows Calculator to start when the device comes out of the suspended state:

C#
CoreDLL.CeRunAppAtEvent(@"\Windows\Calc.exe", 
       (int)WhichEvent.NOTIFICATION_EVENT_DEVICE_CHANGE);

After that call, the Windows Calculator will start every single time that the device is woken up. To prevent the Calculator from starting up, a second call is necessary:

C#
CoreDLL.CeRunAppAtEvent(@"\Windows\Calc.exe", 
       (int)WhichEvent.NOTIFICATION_EVENT_NONE);

Included with this article is an example application that can be used to cause an application to launch various events. Originally, this program would only register a program to start upon wakeup. But, I've extended the program so that it can also start programs in response to other events. Note that by changing the value in the call to CERunAppAtEvent, you can use the program to cause an executable to launch because of some other event (such as a memory card being inserted, or ActiveSync completing its synchronization).

WiMoAutostart/WakeupStart.png

When a program is auto-started, a string is passed to it through the command line indicating the event that started it. I've included a program named ShowCommandLine with the source code that does nothing more than display the command line arguments that it received. From the screenshot below, you can see the command line argument that was received when the program was started upon connecting to a network connection.

WiMoAutostart/ShowCommandLine.png

Preventing multiple instances

Normally, the .NET framework will take care of ensuring that multiple instances of your program are not running. This doesn't always work for programs that are started because of a system event. Several system events can be fired in rapid succession, or the same event can be fired twice (for some odd reason, the wakeup event is usually fired twice). The first time I tried scheduling the ShowCommandLine program to start on wakeup of another event, I ended up with several instances of it running.

WiMoAutostart/MultiInstance.png

To get around this, I create an event object (using P/Invoke) before loading the form. If several instances of the program are started in rapid succession, then the creation of the event will fail, and we can use this failure to know that this is not the first instance of the program and immediately unload it.

C#
static void Main()
{
    IntPtr eventHandle = IntPtr.Zero;
    const string ApplicationEventName = "ShowCommandLineEvent";
    //We will use this as our handle to ensure only one instance of the
    //program is started            

    try
    {
        //Try to create the event. If the creation fails then it is 
        //because another instance of this application is already 
        //running. If another instance exists then this instance
        //should immediatly terminate.
        eventHandle = CoreDLL.CreateEvent(IntPtr.Zero, true, 
                                          false, ApplicationEventName);
        int lastError = Marshal.GetLastWin32Error();
        //MessageBox.Show(String.Format("event handle {0}",eventHandle));
        
        if (0 == lastError)
        {
            Application.Run(new Form1());
        }
    }
    finally
    {
        //When the application is no longer 
        //running it should release the event
        if (eventHandle != IntPtr.Zero)
            CoreDLL.CloseHandle(eventHandle);
    }
}

When multiple instances of a program are created in this manner, you may want to send a notification to the first instance of the program so that it can respond to the event.

What's next?

This article is largely the result of research I am doing in preparation for software solutions that I plan to design. In the next part of my research, I will develop a solution for making the phone respond to other events not exposed directly through the CeRunAppAtEvent function.

History

  • 19 July 2008 - Initial publication.
  • 31 July 2008 - Added reference to SHCreateShortcut. (Thanks Zoomesh!)

License

This article, along with any associated source code and files, is licensed under The Code Project Open License (CPOL)


Written By
Software Developer
United States United States
I attended Southern Polytechnic State University and earned a Bachelors of Science in Computer Science and later returned to earn a Masters of Science in Software Engineering. I've largely developed solutions that are based on a mix of Microsoft technologies with open source technologies mixed in. I've got an interest in astronomy and you'll see that interest overflow into some of my code project articles from time to time.



Twitter:@j2inet

Instagram: j2inet


Comments and Discussions

 
GeneralMy vote of 5 Pin
jmnemonik23-Jun-11 11:14
jmnemonik23-Jun-11 11:14 
GeneralThanks for the great article Pin
Chris Duva3-Mar-10 5:00
Chris Duva3-Mar-10 5:00 
Questionapp that triggers when a specific app is running? Pin
ranier_ramos22-Feb-10 20:44
ranier_ramos22-Feb-10 20:44 
AnswerRe: app that triggers when a specific app is running? Pin
Joel Ivory Johnson2-Mar-10 4:31
professionalJoel Ivory Johnson2-Mar-10 4:31 
Generalpower key Pin
cheertek30-Sep-09 13:17
cheertek30-Sep-09 13:17 
GeneralDon't Interact with the Power Key Pin
Joel Ivory Johnson26-Oct-09 8:27
professionalJoel Ivory Johnson26-Oct-09 8:27 
QuestionPower off Pin
cheertek14-Sep-09 20:30
cheertek14-Sep-09 20:30 
AnswerRe: Power off Pin
Joel Ivory Johnson15-Sep-09 2:21
professionalJoel Ivory Johnson15-Sep-09 2:21 
GeneralRe: Power off [modified] Pin
cheertek21-Sep-09 14:46
cheertek21-Sep-09 14:46 
GeneralVery good Article. Pin
freedeveloper29-Aug-09 0:19
professionalfreedeveloper29-Aug-09 0:19 
QuestionMinimize on startup Pin
nilavya31-Jul-09 5:39
nilavya31-Jul-09 5:39 
GeneralAutostart disabling Pin
namiiiii13-Jul-09 4:22
namiiiii13-Jul-09 4:22 
GeneralRe: Autostart disabling Pin
Joel Ivory Johnson21-Jul-09 13:45
professionalJoel Ivory Johnson21-Jul-09 13:45 
QuestionAn issue when calling CeRunAppAtTime at specified time Pin
vanhuycntt10-Jul-09 16:29
vanhuycntt10-Jul-09 16:29 
GeneralVery similar to a "keep alive" app I'm trying to design Pin
kmartburrito10-Jul-09 6:13
kmartburrito10-Jul-09 6:13 
GeneralRe: Very similar to a "keep alive" app I'm trying to design Pin
Joel Ivory Johnson10-Jul-09 6:45
professionalJoel Ivory Johnson10-Jul-09 6:45 
GeneralInteresting Pin
Brian Shifrin8-Jul-09 5:31
Brian Shifrin8-Jul-09 5:31 
Questionevent for gps connection Pin
d3nika5-May-09 20:38
d3nika5-May-09 20:38 
Generallaunch app at USB cable Pin
joshi aniruddha29-Apr-09 19:57
joshi aniruddha29-Apr-09 19:57 
how to detect programmatically that USB cable is connected to device?
Questionrun app. at incoming call... Pin
barbod_blue21-Apr-09 21:37
barbod_blue21-Apr-09 21:37 
Generalquery regarding Starting a program at a specified time Pin
kria_a30-Mar-09 21:11
kria_a30-Mar-09 21:11 
GeneralRe: query regarding Starting a program at a specified time Pin
Joel Ivory Johnson31-Mar-09 4:55
professionalJoel Ivory Johnson31-Mar-09 4:55 
GeneralRe: query regarding Starting a program at a specified time Pin
kria_a19-Apr-09 22:52
kria_a19-Apr-09 22:52 
GeneralRe: query regarding Starting a program at a specified time Pin
Joel Ivory Johnson20-Apr-09 16:56
professionalJoel Ivory Johnson20-Apr-09 16:56 
GeneralRe: query regarding Starting a program at a specified time Pin
kria_a22-Jun-09 0:21
kria_a22-Jun-09 0:21 

General General    News News    Suggestion Suggestion    Question Question    Bug Bug    Answer Answer    Joke Joke    Praise Praise    Rant Rant    Admin Admin   

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.