|
Hi,
Could anyone please help me with hiding the task bar when application runs. I did that with some code. But when I run another process from a button click, the task bar reappears. I want to disable the windows button too..
Thanks
-----------------------------
I am a beginner
|
|
|
|
|
Don't cross post in multiple forums. Pick one and stick with it.
|
|
|
|
|
|
Help you with what? You haven't stated any kind of a problem you're running into.
If you're looking for code, noone is just going to hand over a project that they've put their hard work into. You have to write your own code. We're just here to help if you run into problems with it.
|
|
|
|
|
You didn't understand me
I need dll files for that machine if you have!!!
thnax,
|
|
|
|
|
Salehtel wrote: You didn't understand me
Of course not! You didn't mention anything about .DLL files in your original post, nor anything about any programming questions.
Salehtel wrote: I need dll files for that machine if you have
The only place you're going to get "DLL files" for that machine is from the manufacturer of it. Noone else is going to give you the files, nor the installer for them, nor can they legally do so.
|
|
|
|
|
I'm guessing that you'll need to get this from ClevelandTime[^].
"WPF has many lovers. It's a veritable porn star!" - Josh Smith As Braveheart once said, "You can take our freedom but you'll never take our Hobnobs!" - Martin Hughes.
My blog | My articles | MoXAML PowerToys | Onyx
|
|
|
|
|
Oooh, that "Download" link looks kind of promising! Doesn't it! 
If thing continue like this, we'll back back to entirely pencil and paper in about 15 years.
|
|
|
|
|
I have what amounts to a set of MS Word macros that I would like to test with automation. It's easy enough to start up word and drive it from my C# code using the Microsoft.Office.Interop.Word and System.Runtime.InteropServices.
One of the things I want to test is error conditions. The macro code will put up MsgBox dialogs with information if the input doesn't conform with my expected format. I would like my automation code to be informed when a dialog/msgbox is created so that negative tests can be performed.
The only thing I've found so far that might be able to do this is the windows hooks stuff by the cutting edge folks (http://msdn.microsoft.com/en-us/magazine/cc188966.aspx[^]).
This seems a little intrusive for what I need. I don't need to get in the call chain for a dialog, just need to be notified when one gets created. I've got to be missing something obvious.
Any pointers would be most appreciated.
|
|
|
|
|
PHinker wrote: The only thing I've found so far that might be able to do this is the windows hooks stuff by the cutting edge folks (http://msdn.microsoft.com/en-us/magazine/cc188966.aspx[^]).
This seems a little intrusive for what I need. I don't need to get in the call chain for a dialog, just need to be notified when one gets created. I've got to be missing something obvious.
The hook is the only way to get "notified" of the creation of a dialog.
The only other way to do it would be to constantly pool and use the GetWindow and FindWindow Win32 functions to get all of the windows in the system. Keep track of them, and scan again, comparing the new list of windows to the previous one. When you find a new window, there you go...
|
|
|
|
|
Thanks for the quick response, Dave. I'll quit looking for another way to do it then. I had been doing something similar to what you suggest (just polling with GetForegroundWindow and seeing when it changed to something unexpected) but it seemed like such a hack I thought I must be missing a better way.
I appreciate your help.
Paul
|
|
|
|
|
|
Let's say I have a .NET 2.0 application that needs to load about 30 different .NET 2.0 assemblies during startup. Said application is taking about 35 seconds to cold-start and about 13 seconds to warm-start under a specific environment. I am aware that these numbers are fairly typical of .NET 2.0 applications. Our company did not develop said application, but am tasked with coming up with suggestions on how to improve the cold-start performance.
The reading I have done suggests that the difference in the two times is due to pages still being available in memory and not as many hard-faults (disk accesses) need to be performed to reload an assembly.
Things I have identified as potential solutions are:
1. Update the minimum hardware requirements (not sure what they currently are, but the tests above were done on a 1.8 GHz P4 with 512MB RAM). The cold-start time drops from 35 to 13 seconds on my development box which is a 3.0 GHz Dual Core with 2GB RAM. Warm-start time drops from 13 seconds to 3 seconds.
2. Update the application and all its assemblies to .NET 3.5. Any idea what improvement is this likely to achieve?
3. Generate native images for the assemblies. This is a trade-off between the time needed to load larger disk images and the time required to JIT-compile a CLR assembly. Is this worth pursuing further?
4. Rebase the assemblies. Using Process Explorer from SysInternals I observed that 30 assemblies were relocated by the OS Loader. Preliminary tests indicate that the performance improvement is negligible.
5. Preload the assemblies. What this would try to achieve is to mimic a warm-start, but I'm not sure how it would have to work. If I have a pre-loader application that loads the assemblies needed by the actual application, aren't different copies of the assemblies loaded by each application into its own AppDomain? How would this help improve cold-start performance unless the assemblies are put in a common place? As you can see I'm a little confused. Help?
I have gleaned most of my information online from http://msdn.microsoft.com/en-us/magazine/cc163655.aspx[^].
I look forward to hearing suggestions, ideas. Thanks.
modified on Thursday, April 30, 2009 7:41 PM
|
|
|
|
|
Based on the description of your problem, number 3 is where I'd start. Google "NGEN" and you'll find the command line utility that creates the native images for your assemblies.
|
|
|
|
|
Hi,
to my c#.net 3.5 application i added a setup project. setup created successfully and running fine.
but when am trying to install in a computer where there is no .net 3.5 framework it is asking in window that 'This setup requires the .NET framework 3.5. please install .net framework and run this setup again. The .NET Framework can be obtained from the web. Would you like to do this now?' with Yes and No buttons.
but in my setup project Prequisites property i selected .Net freamework2.0, 3.5 and window installer 3.1
and i selected 2nd radiobutton that is Download prerequisites from the same location as my application.
i build it successfully i got respective folders in to my debug folder.
but during the installation it is not installing automatically that .net framework3.5
forcefully am going to install framework.
To install automatically what i have to do?
Please explain.
Thanks in advance.
--Naren
|
|
|
|
|
Look, you've been failing at this for over a week now. If you have not yet read the documentation I strongly advise you to do so. If you have read it and you still have this ridiculously unintelligent understanding of how this will work then you are not qualified to be doing this job.
|
|
|
|
|
|
hello friends
What points should b consider when i update my project from vs2002 to vs2005.B;coz i m facing too many linker errors like
error LNK2001: unresolved external symbol __imp___CrtDbgReportW
error LNK2001: unresolved external symbol __imp___CrtDbgReportW
error LNK2019: unresolved external symbol "private: class ReferenceMaker & __thiscall ReferenceMaker::operator=(class ReferenceMaker const &)" (??4ReferenceMaker@@AAEAAV0@ABV0@@Z) referenced in function "public: class ReferenceTarget & __thiscall ReferenceTarget::operator=(class ReferenceTarget const &)" (??4ReferenceTarget@@QAEAAV0@ABV0@@Z)
|
|
|
|
|
Are you using Visual Studio 2005 Project Update Wizard?
Either you love IT or leave IT...
|
|
|
|
|
Have a Google on "Breaking changes in Visual C++." You will find an article or two describing the changes in the different versions of the compiler. That should help you in migrating.
|
|
|
|
|
Hi
Can anyone please guide me how do I use ISO 8583 messages with Biztalk. There's no help on Internet. Pls Help
|
|
|
|
|
Hi all!!!
How do i create camera view in smartphones form .NET WM5?
|
|
|
|
|
|
i need a prog to send messages to administrator or account holder's mobile through bluetooth or any other means when an unauthorised person tries to access any system login or user account or any sort of login form.
|
|
|
|
|
That's nice. Perhaps you should break your problem down into small, logical steps which you can do - consider it a form of "idea refactoring"
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
