|
Hi Bobby,
Why dont you write the code on RowDataBound. Something like:
Private Sub GridView_RowDataBound(sender As [Object], e As GridViewRowEventArgs)
If e.Row.RowType.Equals(DataControlRowType.DataRow) Then
If Convert.ToDateTime(e.Row.Cells(4).Text) = DateTime.Now.[Date] Then
e.Row.Style.Add("text-decoration", "blink")
End If
End If
End Sub
Hope this helps !! 
Regards,
Praneet
|
|
|
|
|
hi praneet,
thanks for your code, actually i am new to visual basic, i am getting the following error while applying to this code.. is there any command needed to be included
error is :
type GridViewRowEventArgs is not defined
type DataControlRowType is not declared
|
|
|
|
|
hi,
I've a pdf file of 10 pages. I need to insert text ("xxx") on the left side of the each page of the pdf file through vb.net 2008 code.
how can I do this?
|
|
|
|
|
You would need to use one of the third party libraries such as iTextSharp.
|
|
|
|
|
You have already asked this question[^] in QA.
"These people looked deep within my soul and assigned me a number based on the order in which I joined."
- Homer
|
|
|
|
|
Hello.
I have an application in VB6 from which I print a report with Crystal Reports 4.0.
For example, when I set a printer as the default printer pdf, when you open the dialog box to save the pdf file in the File name field I wrote "Seagate Crystal Reports - xxxxx.pdf."
How do I set this code to the file name that comes by default?
Which Crystal Report I have set to change the name of the file / print?
Thanks to all
|
|
|
|
|
I've seen a lot of discussion on this subject, but no real solution. I get the problem on one machine but on another the program works correctly. I'm using Visual Studio express 2013, but all the "solutions" I've seen refer to Visual Basic 2010 and the "solution" doesn't seem to work with VS Express 2013. Any help would really be appreciated.
|
|
|
|
|
|
I've used ADO but ADODB is easier for me to use and I've used it for many years (I'm 81 now so I've used about all the languages there are over time). But, I like ADODB for Visual Basic, and it has always worked correctly until Microsoft started messing with it. So, was that your solution?
|
|
|
|
|
It was just a suggestion. ADODB is definitely an "ex-parrot" now; it hasn't been updated since .NET was released, and although it still works, it's not supported.
Using ADODB from a .NET application is going to be significantly slower than using ADO.NET, since your .NET code has to talk to a COM wrapper for ADODB. It also has significantly less features that ADO.NET, and makes many operations harder than they need to be.
If you feel like taking the plunge, there are plenty of articles to get you up to speed. For example:
Migrating from ADO to ADO.NET[^]
Migrating Code and Concepts from ADO "Classic" to ADO.NET[^]
"These people looked deep within my soul and assigned me a number based on the order in which I joined."
- Homer
|
|
|
|
|
I love this. It means that there is hope for me at 70. I've been a programmer for decades using 4g OOP, mostly Progress DB system, but never got into VB. But I'm retired now and I'm really trying hard to understand all the .net object calls, there are so many and with so many parameters.
This is really encouraging to me, Ed, Thanks. LOL
|
|
|
|
|
It sounds like your reference has the "Embed Interop Types" property set to "True". Try changing it to "False".
"These people looked deep within my soul and assigned me a number based on the order in which I joined."
- Homer
|
|
|
|
|
That is the "solution" that I've seen from several others, but in VS 2013 there doesn't seem to be any way to do that. I've tried every way I can think of. If you have a suggestion as to how; I will certainly try it.
|
|
|
|
|
The "solution" is not bound to a specific version of the IDE.
Go to the main-menu, choose "View", "Solution Explorer". That shows a list of files in your solution, as well as a node called "References". Open that node, expand it.
Find the reference to the library, select it, press F4. This will bring up the properties window. You can manipulate the mentioned settings there.
Bastard Programmer from Hell 
If you can't read my code, try converting it here[^]
|
|
|
|
|
Well that sort of worked: As long as I was still in VS 2013 it worked. If I compiled the release version, it didn't. I got a message "could not load...." but this time showing only "culture=neutral" and "PublicKeyToken=null". But the release version still works on the original machine. I think it's demon-possessed. I may have to break down and take your advice and redo a version using ADO instead of ADODB (assuming at my age I have enough time left). I hate that. I might even have to switch to SQL Server, but I haven't tried to use that in a long time. I hate that even worse.
|
|
|
|
|
Ed Barnes wrote: But the release version still works on the original machine.
Did you also include the "Copy Local" setting? If those types aren't embedded then it will look for them on the installation somewhere. In the GAC and the local working-directory (often the same folder as the executable), and to make things worse, if the app is compiled for 32-bits it won't be able to load with a 64-bits version of that library. You'd need a copy of that library in your working-folder.
Go the the properties of the reference again, where those settings are. There's also a property called "Path", and that would contain the complete path to the library that is referenced on the development machine. Copy that file into the \debug folder
Ed Barnes wrote: I think it's demon-possessed.
Being in a DLL-Hel is worse than that though.
Ed Barnes wrote: I may have to break down and take your advice and redo a version using ADO
instead of ADODB
If you struggle with ADO.NET, simply come back and post the question.
Ed Barnes wrote: I might even have to switch to SQL Server, but I haven't tried to use that in a long time. I hate that even worse.
If you want to go that way, there's a relative easy migration; design your tables in MS-Access as usual. There should be an "upsize wizard" in the developers-menu that converts the Access-database to SQL Server format. Once that is done, one can create a new Access database that links to the tables in SQL Server, so one can work with them from Access.
Bastard Programmer from Hell
If you can't read my code, try converting it here[^]
|
|
|
|
|
Thanks. I checked the copy local and it was set correctly. I even checked the version of ADODB.dll and it was the same as on the original machine and the Path was correct. IF I were to take the route of moving from ADODB to OleDB, what would be the best (easiest? Most straightforward?) way to go about it, other than recoding the whole program to get rid of ADODB recordsets: Datasets? DataTables? DataAdapter? I've never done an entire program using OleDb that I can remember (of course at my advanced age of 81, what I remember and what is a fact may be completely different)
|
|
|
|
|
Ed Barnes wrote: I checked the copy local and it was set correctly. I even checked the version of
ADODB.dll and it was the same as on the original machine and the Path was
correct.
At that point I'd start to suspect the target-machine to have some version registered in a different location. A failed setup can cause weird configurations - you might want to run a Registry-checker on the machine, and try and find out if there's multiple versions of the JET engine installed. (Multiple versions of Access or similar products)
A DataTable[^] would be comparable to a recordset - encapsulates a single table containing multiple rows. I'd recommend to stay away from the DataAdapter.
Ed Barnes wrote: I've never done an entire program using OleDb that I can remember
There's a first time for everything 
Again, if you struggle with a specific pattern, post it here and we'll translate it.
Ed Barnes wrote: of course at my advanced age of 81, what I remember and what is a fact may be completely different
Facts are revised all the time - stick with memory, it is more stable.
Bastard Programmer from Hell
If you can't read my code, try converting it here[^]
|
|
|
|
|
Okay, Thanks: Data Tables.
But "Facts are revised all the time - stick with memory, it is more stable" I'm not sure about that. My mother used to tell me that I remembered all sorts of things that never happened.
|
|
|
|
|
Ed Barnes wrote: My mother used to tell me that I remembered all sorts of things that never happened.
Yah, ditto, and I'm not half that age. Most of us carry some false memories, for various reasons.
I can never remember the price of groceries, always going up. I don't remember summers like the last one, it nearly rained every day. I hardly remember being the hydrant, but I do remember being the dog.
Vaguely.
Bastard Programmer from Hell
If you can't read my code, try converting it here[^]
|
|
|
|
|
Hi, i have been thinking a long time in making a software to use my webcam to control the mouse on my PC, I have been searching but I can not find something based on VB.NET (I only work with VB and I have limited experience). So I want to tell you what I have been thinking hoping you can help me.
I only need to take real time video, convert it into images, compare the new image with the last one and find if there is a change in the position, calculate how much it change in X and Y and take those values to set mouse pointer movement (I mean if the image change 1 pixel in the Y axis then make the mouse move 1 pixel in the same direction). Most software focus on one object, may be one hand, one color, etc. What I need is just to use the whole image to know if it moves and where does it moves. This is because I wont use the cam standing on my desk, I want to hack it and use it as a laser pointer, so where I aim my cam in an image projected by a video-beam there will be the mouse.
Hope I made myself clear and you could help me.
Thanks in advance.
|
|
|
|
|
You might want to examine, very closely, two consecutive images you get from a web cam before you put a ton of effort into this project. EVERY image is different, all over the image. What you consider to be a "change" must be under a threshold value.
Also, since most monitors today exceed the resolution of a web cam, you'll find that your definition of a "pixel" is not going to be anywhere close to "precise".
What do you mean by "video beam"? Are you talking about a non-moving laser spot on a wall?
|
|
|
|
|
Hi Dave, thanks for your answer, actually I have limited experience with VB.NET, I have been working in a software to use it in my work but I am learning on the way, anytime I need to do something I do a research and apply it on my software but this will be a personal project. I am also new on the page, is my first post asking help.
What I would like to do is kind of emulate the process done by the computer mouse. It has a low res cam that take images form the surface and compare them to get the delta X and delta Y. also the trackpad of an Blackberry phone uses the same principies. to help you understand watch this video to see what I want to learn to do.
http://www.youtube.com/watch?v=57kTrKJHOjM
Thanks a lot.  
|
|
|
|
|
OK, so you're taking consecutive pictures and comparing them to see which way the picture has moved.
The problem with this is that you cannot do a pixel-by-pixel comparison as you have to no idea how far the image has moved and which way the image shifted.
You have to look for items in the image and track those items. THIS IS NOT A TRIVIAL TASK!
Look into the AForge[^] library to help with the "computer vision".
|
|
|
|
|
how do i extract specific data in excel into a database
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
