<?xml version="1.0"?>
<doc>
<assembly>
<name>Microsoft.ApplicationBlocks.UIProcess</name>
</assembly>
<members>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.CacheConfiguration">
<summary>
Stores information needed to configure the state cache.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.CacheConfiguration.#ctor(Microsoft.ApplicationBlocks.UIProcess.CacheExpirationMode,System.TimeSpan)">
<summary>
Create a CacheConfiguration object.
</summary>
<param name="mode">The expiration mode for the cache. <see cref="T:Microsoft.ApplicationBlocks.UIProcess.CacheExpirationMode"/></param>
<param name="interval">How often to check for expiration.</param>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.CacheConfiguration.Mode">
<summary>
The expiration mode of the cache. <see cref="T:Microsoft.ApplicationBlocks.UIProcess.CacheExpirationMode"/>
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.CacheConfiguration.Interval">
<summary>
The expiration interval for the cache.
</summary>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.NavigateToSettings">
<summary>
Class that defines the navigateTo settings within the UIP configuration settings in the configuration file.
</summary>
</member>
<member name="F:Microsoft.ApplicationBlocks.UIProcess.NavigateToSettings.AttributeNavigateValue">
<summary>
Key used to retrieve the navigateValue attribute for this navigateToSettings object.
</summary>
</member>
<member name="F:Microsoft.ApplicationBlocks.UIProcess.NavigateToSettings.AttributeView">
<summary>
Key used to retrieve the view attribute for this navigateToSettings object.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.NavigateToSettings.#ctor(System.Xml.XmlNode)">
<summary>
Creates an instance of the NavigationToSettings class using the specified configNode.
</summary>
<param name="configNode">The XmlNode from the configuration file.</param>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.NavigateToSettings.NavigateValue">
<summary>
Gets the navigation value.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.NavigateToSettings.View">
<summary>
Gets or sets the view name.
</summary>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.NavigationGraphSettings">
<summary>
Represents the settings defined by the navigationGraph element in the configuration file.
</summary>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.NavigatorSettings">
<summary>
Base class that encapsulates information from the configuration file that is common
to different types of navigators.
</summary>
</member>
<member name="F:Microsoft.ApplicationBlocks.UIProcess.NavigatorSettings.AttributeIViewManager">
<summary>
Key used to retrieve the viewManager attribute for this object.
</summary>
</member>
<member name="F:Microsoft.ApplicationBlocks.UIProcess.NavigatorSettings.AttributeName">
<summary>
Key used to retrieve the name attribute for this object.
</summary>
</member>
<member name="F:Microsoft.ApplicationBlocks.UIProcess.NavigatorSettings.AttributeState">
<summary>
Key used to retrieve the state attribute for this object.
</summary>
</member>
<member name="F:Microsoft.ApplicationBlocks.UIProcess.NavigatorSettings.AttributeStatePersist">
<summary>
/// Key used to retrieve the statePersist attribute for this object.
</summary>
</member>
<member name="F:Microsoft.ApplicationBlocks.UIProcess.NavigatorSettings.AttributeExpirationMode">
<summary>
/// Key used to retrieve the cacheExpirationMode attribute for this object.
</summary>
</member>
<member name="F:Microsoft.ApplicationBlocks.UIProcess.NavigatorSettings.AttributeExpirationInterval">
<summary>
/// Key used to retrieve the cacheExpirationInterval attribute for this object.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.NavigatorSettings.#ctor">
<summary>
Creates a NavigatorSettings object.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.NavigatorSettings.LoadAttributes(System.Xml.XmlNode)">
<summary>
Initializes properties based on settings in the configuration file.
</summary>
<param name="configNode">The XmlNode from the configuration file.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.NavigatorSettings.LoadRemainingAttributes(System.Xml.XmlNode)">
<summary>
Loads the remaining attributes from the configuration file.
</summary>
<param name="configNode">The XmlNode from the configuration file.</param>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.NavigatorSettings.ViewManager">
<summary>
Gets the IViewManager name.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.NavigatorSettings.Name">
<summary>
Gets the navigation graph name.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.NavigatorSettings.State">
<summary>
Gets the State object type used by this navigation graph.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.NavigatorSettings.StatePersist">
<summary>
Gets the state persistence provider used by this navigation graph.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.NavigatorSettings.CacheExpirationMode">
<summary>
Gets the state cache expiration mode.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.NavigatorSettings.CacheExpirationInterval">
<summary>
Gets the state cache expiration interval.
</summary>
</member>
<member name="F:Microsoft.ApplicationBlocks.UIProcess.NavigationGraphSettings.AttributeStartView">
<summary>
Key used to retrieve the startView attribute for this NavigationGraphSettings object from
the configuration file.
</summary>
</member>
<member name="F:Microsoft.ApplicationBlocks.UIProcess.NavigationGraphSettings.AttributeEndView">
<summary>
Key used to retrieve the endView attribute for this NavigationGraphSettings object.
</summary>
</member>
<member name="F:Microsoft.ApplicationBlocks.UIProcess.NavigationGraphSettings.AttributeRunInWizardMode">
<summary>
Key used to retrieve the runInWizardMode attribute for this NavigationGraphSettings object.
</summary>
</member>
<member name="F:Microsoft.ApplicationBlocks.UIProcess.NavigationGraphSettings.NodeXPath">
<summary>
XPath expression used to retrieve the nodes that are defined for this NavigationGraphSettings
object.
</summary>
</member>
<member name="F:Microsoft.ApplicationBlocks.UIProcess.NavigationGraphSettings.SharedTransitionsXPath">
<summary>
XPath expression used to retrieve the shared transitions that are defined for this NavigationGraphSettings
object.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.NavigationGraphSettings.#ctor">
<summary>
Default constructor.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.NavigationGraphSettings.#ctor(System.Xml.XmlNode)">
<summary>
Creates an instance of the NavigationGraphSettings class using the specified configNode.
</summary>
<param name="configNode">The XmlNode from the configuration file.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.NavigationGraphSettings.LoadAttributes(System.Xml.XmlNode)">
<summary>
Overridden. Loads the attributes for the navigation graph specified in the configuration file.
</summary>
<param name="configNode">The XmlNode from the configuration file.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.NavigationGraphSettings.Views">
<summary>
Returns an array <see cref="T:Microsoft.ApplicationBlocks.UIProcess.NodeSettings"/> for each node specfied in the navigation graph.
</summary>
<returns>The settings.</returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.NavigationGraphSettings.SharedTransitions">
<summary>
Returns an array of <see cref="T:Microsoft.ApplicationBlocks.UIProcess.SharedTransitionSettings"/> for the navigation graph.
</summary>
<returns>The array of shared transition settings.</returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.NavigationGraphSettings.GetSharedTransitionSettings(System.String)">
<summary>
Returns the <see cref="T:Microsoft.ApplicationBlocks.UIProcess.SharedTransitionSettings"/> for the specified navigate value.
</summary>
<param name="navigateValue">The navigate value.</param>
<returns></returns>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.NavigationGraphSettings.RunInWizardMode">
<summary>
Returns true if the navigation graph is to be used for a wizard; otherwise, returns false.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.NavigationGraphSettings.Item(System.String)">
<summary>
Gets <see cref="T:Microsoft.ApplicationBlocks.UIProcess.NodeSettings"/> for the specified view.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.NavigationGraphSettings.FirstView">
<summary>
Gets the first <see cref="T:Microsoft.ApplicationBlocks.UIProcess.NodeSettings"/> configured in the navigation graph.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.NavigationGraphSettings.LastView">
<summary>
Gets the last <see cref="T:Microsoft.ApplicationBlocks.UIProcess.NodeSettings"/> configured in the navigation graph.
</summary>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.NodeSettings">
<summary>
Represents the settings defined by the Node element in the configuration file.
</summary>
</member>
<member name="F:Microsoft.ApplicationBlocks.UIProcess.NodeSettings.AttributeView">
<summary>
Key used to retrieve the view attribute for this object.
</summary>
</member>
<member name="F:Microsoft.ApplicationBlocks.UIProcess.NodeSettings.NodeNavigateTo">
<summary>
Key used to retrieve the navigateTo attribute for this object.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.NodeSettings.#ctor">
<summary>
Overloaded. Default contructor.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.NodeSettings.#ctor(System.Xml.XmlNode)">
<summary>
Overloaded. Initializes an instance of the NodeSettings class using the specified configNode.
</summary>
<param name="configNode">The XmlNode from the configuration file.</param>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.NodeSettings.Item(System.String)">
<summary>
Gets the specifed navigateTo settings.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.NodeSettings.View">
<summary>
Gets the view name.
</summary>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.ObjectTypeSettings">
<summary>
Base class for all providers settings within the UIP configuration settings in the configuration file.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.ObjectTypeSettings.#ctor">
<summary>
Overloaded. Default constructor.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.ObjectTypeSettings.#ctor(System.Xml.XmlNode)">
<summary>
Overloaded. Initialized an instance of the ObjectTypeSettings class using the specified configNode.
</summary>
<param name="configNode">The XmlNode from the configuration file.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.ObjectTypeSettings.SplitType(System.String)">
<summary>
Takes the incoming full type string, defined as:
"Microsoft.ApplicationBlocks.UIProcess.WinFormViewManager, Microsoft.ApplicationBlocks.UIProcess,
Version=1.0.0.4, Culture=neutral, PublicKeyToken=d69d63db1380c14d"
and splits the type into two strings: the typeName and the assemblyName. These are passed as OUT params.
This routine also cleans up any extra white space and throws an exception if the full type string
does not have five comma-delimited parts. It expects the true full name, complete with version and publicKeyToken.
</summary>
<param name="fullType">The full type string defined in the configuration file.</param>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.ObjectTypeSettings.Name">
<summary>
Gets the object name.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.ObjectTypeSettings.Type">
<summary>
Gets the object fully qualified type name.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.ObjectTypeSettings.Assembly">
<summary>
Gets the object fully qualified assembly name.
</summary>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.SharedTransitionSettings">
<summary>
The SharedTransitionSettings class is a representation of the
shared transition configuration defined in the configuration file.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.SharedTransitionSettings.#ctor">
<summary>
Overloaded. Initializes a new instance of the SharedTransitionSettings class.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.SharedTransitionSettings.#ctor(System.Xml.XmlNode)">
<summary>
Overloaded. Initializes an instance of the SharedTransitionSettings class using the specified configNode.
</summary>
<param name="configNode">The XmlNode from the configuration file.</param>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.SharedTransitionSettings.NavigateValue">
<summary>
Gets the navigation value.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.SharedTransitionSettings.View">
<summary>
Gets or sets the view name.
</summary>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.StatePersistenceProviderSettings">
<summary>
The StatePersistenceProviderSettings class is a representation of the
state persistence configuration defined in the configuration file.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.StatePersistenceProviderSettings.#ctor(System.Xml.XmlNode)">
<summary>
Creates an instance of the StatePersistenceProviderSettings class using the specified configNode.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.StatePersistenceProviderSettings.AdditionalAttributes">
<summary>
Gets the state persistence attributes.
</summary>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.UIPConfigHandler">
<summary>
The configuration section handler for the uipConfiguration section of the configuration file.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.UIPConfigHandler.#ctor">
<summary>
Default constructor.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.UIPConfigHandler.Create(System.Object,System.Object,System.Xml.XmlNode)">
<summary>
Factory method that creates a configuration handler for a specific section of XML in the app.config.
</summary>
<param name="parent">Unused; was for future development (should be removed).</param>
<param name="input">Unused; was for future development (should be removed).</param>
<param name="section">The node.</param>
<returns>UIPConfigSettings for the section.</returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.UIPConfigHandler.Create(System.Object,System.Object,System.Xml.XmlNode,System.IFormatProvider)">
<summary>
Factory method that creates a configuration handler for a specific section of XML in the app.config.
</summary>
<param name="parent">Unused; was for future development (should be removed).</param>
<param name="input">Unused; was for future development (should be removed).</param>
<param name="section">The node.</param>
<param name="formatProvider">The format provider.</param>
<returns>UIPConfigSettings for the section.</returns>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.UIPConfigSettings">
<summary>
This class contains all of the UIP configuration from the configuration file.
</summary>
<remarks>
The UIPConfigSettings hierarchy is as follows:
UIPConfigSettings
--- ObjectTypeSettings collection
--- ViewSettings collection
--- SharedTransitionSettings collection
--- NavigationGraphSettings
--- SharedTransitionSettings collection
--- NodeSettings collection
--- NavigateToSettings collection
</remarks>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.UIPConfigSettings.LayoutManagerCount">
<summary>
Used for testing. Should be removed.
</summary>
<returns>Number of layout managers.</returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.UIPConfigSettings.#ctor">
<summary>
Constructor.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.UIPConfigSettings.#ctor(System.Xml.XmlNode)">
<summary>
Creates an instance of the UIPConfigSettings class using the specified configNode.
</summary>
<param name="configNode">The XmlNode from the configuration file.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.UIPConfigSettings.#ctor(System.Xml.XmlNode,System.IFormatProvider)">
<summary>
Creates UIPConfigSettings from an XmlNode read of the app.config and an IFormatProvider.
</summary>
<param name="configNode">The XmlNode from the configuration file.</param>
<param name="formatProvider">The provider.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.UIPConfigSettings.GetSharedTransitionSettings(System.String)">
<summary>
Returns the settings for the shared transition.
</summary>
<param name="navigateValue">The name of the navigation graph element.</param>
<returns>The settings.</returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.UIPConfigSettings.ContainsNavigationGraphSettings(System.String)">
<summary>
Checks if a navigation graph by that name exists.
</summary>
<param name="navigationGraphName">The name of the navigation graph element.</param>
<returns></returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.UIPConfigSettings.GetNavigationGraphSettings(System.String)">
<summary>
Returns the settings for the navigation graph.
</summary>
<param name="navigationGraphName">The name of the navigation graph element.</param>
<returns>The settings.</returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.UIPConfigSettings.ContainsHostedControlsSettings(System.String)">
<summary>
Checks if a hosted controls element exists.
</summary>
<param name="hostedControlsName">The name of the element to check for.</param>
<returns></returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.UIPConfigSettings.GetHostedControlsSettings(System.String)">
<summary>
Returns the settings for hosted controls.
</summary>
<param name="hostedControlsName">The name of the hosted controls element.</param>
<returns>The settings.</returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.UIPConfigSettings.GetNavigatorSettings(System.String)">
<summary>
Gets the navigator settings.
</summary>
<param name="navigatorName">The navigator name.</param>
<returns>The settings.</returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.UIPConfigSettings.GetIViewManagerSettingsFromNavigatorName(System.String)">
<summary>
Returns an ObjectTypeSettings wrapper around type information for the IViewManager found in the configuration file.
</summary>
<param name="navigatorName">The name of the navigation graph.</param>
<returns>The IViewManager settings configured for the specified navigation graph.</returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.UIPConfigSettings.GetIViewManagerSettings(System.String)">
<summary>
Returns the settings for a view manager.
</summary>
<param name="viewName">The name of the view manager.</param>
<returns>The settings.</returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.UIPConfigSettings.GetViewSettingsFromName(System.String)">
<summary>
Looks up a view name based on view name.
</summary>
<param name="viewName">The name of the view to retrieve the settings for.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.UIPConfigSettings.GetViewSettingsFromType(System.String)">
<summary>
Finds the view setting for a specified view type.
</summary>
<param name="viewType">The view type defined in the app.config.</param>
<returns>The settings.</returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.UIPConfigSettings.GetNextViewSettings(System.String,System.String,System.String)">
<summary>
Looks up the next view based on the incoming graph, view, and navigation values.
</summary>
<param name="navigationGraphName">Name of the navigation graph that is being worked in.</param>
<param name="currentViewName">Name of the current view.</param>
<param name="navigateValue">Navigate value used to determine the next view to be navigated to from the current view.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.UIPConfigSettings.GetFirstViewSettings(System.String)">
<summary>
Returns the first view name in given navigation graph.
</summary>
<param name="navigationGraphName">The name of the navigation graph to retrieve the first view for.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.UIPConfigSettings.GetPersistenceProviderSettings(System.String)">
<summary>
Looks up the state persistence provider by using the navigator name.
</summary>
<param name="navigatorName">The name of the navigator to retrieve the persistence provider settings for.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.UIPConfigSettings.GetStateSettings(System.String)">
<summary>
Gets the settings of the state object used by the specified navigator.
</summary>
<param name="navigatorName">The name of the navigator to retrieve the state settings for.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.UIPConfigSettings.GetStateSettingsByName(System.String)">
<summary>
Finds the state setting for a specified state.
</summary>
<param name="stateName">The state name.</param>
<returns>The settings.</returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.UIPConfigSettings.GetControllerSettings(System.String)">
<summary>
Gets the settings of the controller object used by the specified view.
</summary>
<param name="viewName">The name of the view to retrieve the controller settings for.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.UIPConfigSettings.GetLayoutManagerSettings(System.String)">
<summary>
Gets the settings of the layout manager used by the specified view.
</summary>
<param name="viewName">The name of the view to retrieve layout manager settings for.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.UIPConfigSettings.ViewExistsInNavigationGraph(System.String,System.String)">
<summary>
Method used to determine if a view exists within a navigation graph.
</summary>
<param name="navigationGraphName">Name of the navigation graph to look in.</param>
<param name="viewName">Name of the view to search for in the navigation graph.</param>
<returns></returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.UIPConfigSettings.ViewExpectsLayoutManager(Microsoft.ApplicationBlocks.UIProcess.ViewSettings)">
<summary>
Returns true if a layout manager is expected. Returns false if no layout manager was specified for a particular view.
</summary>
<param name="viewSettings">The configuration of a specific view.</param>
<returns></returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.UIPConfigSettings.GetCacheConfiguration(System.String)">
<summary>
Gets the cache settings used by the specified navigation graph.
</summary>
<param name="navigatorName">The name of the navigation graph to retrieve cache configuration information for.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.UIPConfigSettings.GetCacheConfiguration">
<summary>
Gets the <see cref="T:Microsoft.ApplicationBlocks.UIProcess.CacheConfiguration"/> for the default mode and interval.
</summary>
<returns></returns>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.UIPConfigSettings.IsStateCacheEnabled">
<summary>
Specifies whether or not the state cache is enabled.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.UIPConfigSettings.DefaultState">
<summary>
Gets the default state as specified in app.config.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.UIPConfigSettings.DefaultStatePersistence">
<summary>
Gets the default state persistence as specified in app.config.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.UIPConfigSettings.DefaultViewManager">
<summary>
Gets the default view manager as specified in app.config.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.UIPConfigSettings.AllowBackButton">
<summary>
Returns true if Back button support is enabled. Returns false to prevent the Back button from functioning.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.UIPConfigSettings.SharedTransitions">
<summary>
Array of global shared transition settings.
</summary>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.CacheExpirationMode">
<summary>
Specifies the expiration modes supported by the state cache in the user process manager.
</summary>
</member>
<member name="F:Microsoft.ApplicationBlocks.UIProcess.CacheExpirationMode.Absolute">
<summary>
Cache expiration cannot be changed.
</summary>
</member>
<member name="F:Microsoft.ApplicationBlocks.UIProcess.CacheExpirationMode.Sliding">
<summary>
Cache expriation varies.
</summary>
</member>
<member name="F:Microsoft.ApplicationBlocks.UIProcess.CacheExpirationMode.None">
<summary>
Cache does not expire.
</summary>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.UIPConfiguration">
<summary>
Helper class to obtain UIP configuration from the configuration file.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.UIPConfiguration.Config">
<summary>
Gets the UIP configuration.
</summary>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.UserControlsSettings">
<summary>
The UserControls settings capture the configuration information for a specific user controls
navigator.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.UserControlsSettings.#ctor">
<summary>
Creates a new HostedControlsSettings object.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.UserControlsSettings.#ctor(System.Xml.XmlNode)">
<summary>
Creates a new HostedControlsSettings object, and initializes it using the XmlNode from the configuration file.
</summary>
<param name="configNode">The XmlNode from the configuration file.</param>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.UserControlsSettings.StartFormName">
<summary>
The name of the form to start on.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.UserControlsSettings.Item(System.String)">
<summary>
Returns the FormSettings class for the named form.
</summary>
<param name="name">The name of the form to retrieve the settings for.</param>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.FormSettings">
<summary>
Represents the configuration file settings for a form in the HostedControls section of the configuration file.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.FormSettings.#ctor(System.Xml.XmlNode)">
<summary>
Creates an instance of a FormSettings object based on information from the configuration file.
</summary>
<param name="configNode">The XmlNode from the configuration file.</param>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.FormSettings.Name">
<summary>
The name of the form. Must correspond to a name in the Views section of the configuration file.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.FormSettings.InitialView">
<summary>
The first control to start on. Optional.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.FormSettings.Item(System.String)">
<summary>
Gets the ChildViewSettings for a control with that name.
</summary>
<param name="name">The control to retrieve the settings for.</param>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.ChildViewSettings">
<summary>
Represents a childview (WinFormControlView) on a form.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.ChildViewSettings.#ctor(System.Xml.XmlNode)">
<summary>
Creates a ChildViewSettings object based on information from the configuration file.
</summary>
<param name="configNode">XmlNode that contains the configuration information for this
object</param>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.ChildViewSettings.Name">
<summary>
The name of the control.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.ChildViewSettings.ViewName">
<summary>
The name of the view in the ViewSettings section of the configuration file.
</summary>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.ViewSettings">
<summary>
The ViewSettings capture the configuration information for a specific view (a view is a class that implements the
<see cref="T:Microsoft.ApplicationBlocks.UIProcess.IView"/> interface).
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.ViewSettings.#ctor">
<summary>
Overloaded. Default constructor.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.ViewSettings.#ctor(System.Xml.XmlNode)">
<summary>
Overloaded. Initialized a new instance of the ViewSettings class using the specified configNode.
</summary>
/// <param name="configNode">XmlNode from the configuration file.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.ViewSettings.#ctor(System.Xml.XmlNode,System.IFormatProvider)">
<summary>
Creates an instance of ViewSettings using the specified configNode and IFormatProvider.
</summary>
<param name="configNode">The XmlNode from the configuration file.</param>
<param name="formatProvider">The IFormatProvider required for globalization.</param>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.ViewSettings.Controller">
<summary>
Gets the controller name related to this view.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.ViewSettings.IsStayOpen">
<summary>
Specifies if the windows should stay open when the Navigate
method is invoked.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.ViewSettings.IsOpenModal">
<summary>
Gets a value that indicates if this view is displayed modally.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.ViewSettings.LayoutManager">
<summary>
Gets a value that indicates the layout manager for this view.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.ViewSettings.Navigator">
<summary>
Gets the XPathNavigator that can be used to traverse the XmlNode that defines the view.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.ViewSettings.IsFloatable">
<summary>
Returns true if the view can be a floating window; if not, returns false.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.ViewSettings.CanHaveFloatingWindows">
<summary>
Returns true if the view can be a parent for floating windows; if not, returns false.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.ViewSettings.CustomAttributes">
<summary>
Gets the collection of custom attributes defined in the app.config.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.ViewSettings.ChildNodes">
<summary>
Gets the child nodes that make up the View element in the app.config.
</summary>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.WizardSettings">
<summary>
<para>The settings for a UIP-mediated wizard.</para>
<para>Settings are stored in the app.config.</para>
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.WizardSettings.#ctor(System.String,System.String)">
<summary>
Overloaded. Initializes a new instance of WizardSettings that uses the default state persistence and state identified in
the configuration file.
</summary>
<param name="defaultStatePersistence">The default StatePersistence mechanism specified in the configuration file.</param>
<param name="defaultState">The State object to be used as specified in the configuration file.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.WizardSettings.#ctor(System.String,System.String,System.Xml.XmlNode)">
<summary>
Overloaded. Initializes a new instance of WizardSettings that uses the default state persistence and state identified in
the app.config and configuration details.
</summary>
<param name="defaultStatePersistence">The default StatePersistence mechanism specified in the configuration file.</param>
<param name="defaultState">The State object specified in the configuration file.</param>
<param name="configNode">The XmlNode from the uipWizard element in the configuration file.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.WizardSettings.AddSequence(System.String)">
<summary>
Adds a view to the sequence of <see cref="T:Microsoft.ApplicationBlocks.UIProcess.IView"/> items in the wizard.
</summary>
<param name="viewName">The name of the view.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.WizardSettings.GetSequenceViewNames">
<summary>
Gets all of the names that make up the sequence of views.
</summary>
<returns>The array of views within the sequence of views.</returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.WizardSettings.GetNavGraphXmlNode(System.IFormatProvider)">
<summary>
Converts wizard settings to a NavGraph xmlNode to be used by <see cref="T:Microsoft.ApplicationBlocks.UIProcess.NavigationGraphSettings"/>.
</summary>
<param name="formatProvider">The format provider.</param>
<returns>The created XmlNode.</returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.WizardSettings.GetNavGraphXml(System.Globalization.CultureInfo)">
<summary>
Converts wizard settings to an XML string that can be converted to an XmlNode.
</summary>
<param name="cultureInfo">The culture for which formatting applies.</param>
<returns>The XML string.</returns>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.WizardSettings.Name">
<summary>
The name of the wizard.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.WizardSettings.SequenceCount">
<summary>
Gets the number of views that make up the wizard.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.WizardSettings.Item(System.Int32)">
<summary>
Gets the name of the view at the specified position within the sequence of views.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.WizardSettings.First">
<summary>
Gets the first view in the sequence of views.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.WizardSettings.Last">
<summary>
Gets the last view in the sequence of views.
</summary>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.ControllerFactory">
<summary>
Factory for creating controllers.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.ControllerFactory.#cctor">
<summary>
Static constructor.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.ControllerFactory.Create(System.String,Microsoft.ApplicationBlocks.UIProcess.Navigator)">
<summary>
Creates the controller for the view.
</summary>
<param name="view">The name of the view in the Views section of the configuration file.</param>
<param name="navigator">The navigator that the controller uses for navigation services.</param>
<returns></returns>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.GenericFactory">
<summary>
Acts as the basic implementation of the multiple factory classes used in UIProcess.
UIP needs to create instances based on configuration information for state, state persistence providers, ViewManagers, and so on.
UIP has factories for these, and because there is much common code for doing reflection-based activation,
it keeps that code in one central place.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.GenericFactory.#cctor">
<summary>
Static constructor.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.GenericFactory.Create(Microsoft.ApplicationBlocks.UIProcess.ObjectTypeSettings)">
<summary>
Creates an object using the full name type contained in typeSettings.
</summary>
<param name="typeSettings">A typeSetting object with the needed type information to create a class instance.</param>
<returns>An instance of the specified type.</returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.GenericFactory.Create(Microsoft.ApplicationBlocks.UIProcess.ObjectTypeSettings,System.Object[])">
<summary>
Creates an object using the full name type contained in typeSettings.
</summary>
<param name="typeSettings">A typeSetting object with the needed type information to create a class instance.</param>
<param name="args">Constructor arguments.</param>
<returns>An instance of the specified type.</returns>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.LayoutManagerFactory">
<summary>
Factory for creating layout managers.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.LayoutManagerFactory.Create(System.String)">
<summary>
Creates a layout manager for the view.
</summary>
<param name="view">The view whose configuration information contains the layout manager settings.</param>
<returns>A layout manager.</returns>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.StateFactory">
<summary>
Factory for creating State objects.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.StateFactory.Load(System.String,System.Guid)">
<summary>
Loads a State object based on the navigation graph and task ID. Internally, attempts to get the object
from the cache first, then creates state persistence provider, and uses it to load explicitly.
</summary>
<param name="navigationGraph">A navigation graph.</param>
<param name="taskId">The task identifier (a GUID associated with the task).</param>
<returns>State</returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.StateFactory.Load(System.Guid)">
<summary>
Loads the state for a given task identifier.
</summary>
<param name="taskId">The task identifier (a GUID associated with the task).</param>
<returns>The state.</returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.StateFactory.Load(Microsoft.ApplicationBlocks.UIProcess.IStatePersistence,System.Guid)">
<summary>
Uses the task ID to explicitly load the state from the provided IStatePersistence instance.
Note that this overload does not attempt to fetch from the cache.
</summary>
<param name="statePersistenceProvider"></param>
<param name="taskId"></param>
<returns></returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.StateFactory.Create">
<summary>
Creates the default State object, loading it from the persistence provider.
</summary>
<returns>Default state instance of type specified in the configuration file.</returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.StateFactory.Create(System.String)">
<summary>
Creates a State object, loading it from persistence provider.
</summary>
<param name="navigatorName">Name of the navigator.</param>
<returns>State instance of the type specified in the configuration file.</returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.StateFactory.Create(Microsoft.ApplicationBlocks.UIProcess.IStatePersistence,Microsoft.ApplicationBlocks.UIProcess.ObjectTypeSettings)">
<summary>
Creates a State object, loading it from persistence provider.
</summary>
<param name="spp">The state persistence provider.</param>
<param name="typeSettings">The state settings.</param>
<returns>A state instance of the type specified in the configuration file.</returns>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.StatePersistenceFactory">
<summary>
Abstract factory that creates IStatePersistence types.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.StatePersistenceFactory.#cctor">
<summary>
Static constructor.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.StatePersistenceFactory.Create">
<summary>
Returns the default instance of IStatePersistence.
</summary>
<returns>An instance of IStatePersistence.</returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.StatePersistenceFactory.Create(System.String)">
<summary>
Returns an instance of IStatePersistence according to the navigator used.
This is an optimization to avoid having to look up type information in the config object each time; instead, it uses the navigator name.
</summary>
<param name="navigator">The navigator name.</param>
<returns>An instance of IStatePersistence of the specified type. It gets this from the internal cache, if possible.</returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.StatePersistenceFactory.Create(Microsoft.ApplicationBlocks.UIProcess.StatePersistenceProviderSettings)">
<summary>
Returns an instance of <see cref="T:Microsoft.ApplicationBlocks.UIProcess.IStatePersistence"/>
for the given <see cref="T:Microsoft.ApplicationBlocks.UIProcess.StatePersistenceProviderSettings"/>.
</summary>
<param name="providerSettings">The settings for state persistence.</param>
<returns>The instance of IStatePersistence. It gets this from the internal cache, if possible.</returns>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.ViewManagerFactory">
<summary>
Factory for creating view managers.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.ViewManagerFactory.#cctor">
<summary>
Static constructor.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.ViewManagerFactory.Create(System.String)">
<summary>
Creates an IViewManager of a type specific to the named NavigationGraph.
If possible, it returns a reference from the internal cache because these are presumed to be stateless.
</summary>
<param name="navigator">The name of a navigator.</param>
<returns>An instance of IViewManager. It gets this from the internal cache, if possible.</returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.ViewManagerFactory.Create(System.String,System.Object[])">
<summary>
Creates an IViewManager of a type specific to the named NavigationGraph.
If possible, it returns a reference from the internal cache because these are presumed to be stateless.
</summary>
<param name="navigator">The name of a navigator.</param>
<param name="args">The constructor parameter for ViewManager.</param>
<returns>An instance of IViewManager. It gets this from the internal cache, if possible.</returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.ViewManagerFactory.Create">
<summary>
Creates an IViewManager defined as DefaultViewManager.
</summary>
<returns>An instance of IViewManager.</returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.ViewManagerFactory.GetViewManagers">
<summary>
Method to retrieve all of the active view managers.
</summary>
<returns>An array of active view managers.</returns>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.GraphNavigator">
<summary>
Navigator used when transitions are defined using a NavigationGraph.
</summary>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.Navigator">
<summary>
Navigators provide navigation services to controllers, and start tasks.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.Navigator.SetState(Microsoft.ApplicationBlocks.UIProcess.State)">
<summary>
Used to set the state during construction of a navigator.
</summary>
<param name="state">State object for this navigator.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.Navigator.Navigate(System.String)">
<summary>
Navigates to the next node.
</summary>
<param name="nextNode">The node or view that will display next.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.Navigator.GetController(Microsoft.ApplicationBlocks.UIProcess.IView)">
<summary>
Creates the controller for this view.
</summary>
<param name="view">The view that needs a controller.</param>
<returns></returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.Navigator.OnStartTask(System.Object,Microsoft.ApplicationBlocks.UIProcess.StartTaskEventArgs)">
<summary>
Handles any StartTask events raised by a controller.
</summary>
<param name="sender">Controller that raised the event.</param>
<param name="e">Arguments used by the event handler.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.Navigator.GetState(Microsoft.ApplicationBlocks.UIProcess.ITask)">
<summary>
Creates or loads the state for this task.
</summary>
<param name="task">The task to create or load state for.</param>
<returns></returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.Navigator.GetState(System.Guid)">
<summary>
Creates or loads state for this task.
</summary>
<param name="taskId">The identifier of the task to load or create state for.</param>
<returns></returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.Navigator.CreateState">
<summary>
Creates a State object using the type specified in the configuration file for this navigator.
Navigators can override this if they need to create state in a different way.
</summary>
<returns>The state that was created.</returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.Navigator.LoadState(System.Guid)">
<summary>
Loads a State object using the type specified in the configuration file for this navigator and task ID.
Navigators can override this if they need to load state in a different way.
</summary>
<param name="taskId">The identifier of the task to load the state for.</param>
<returns>The state that was created.</returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.Navigator.GetViewNameFromNodeName(System.String)">
<summary>
Used to retrieve the name of a view from a particular node. Meant to be overriden by derived
navigators that need to implement this functionality.
</summary>
<param name="nodeName"></param>
<returns></returns>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.Navigator.ViewManager">
<summary>
The view manager used.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.Navigator.Name">
<summary>
The name of the navigator.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.Navigator.CurrentState">
<summary>
The current state of the navigator.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.Navigator.CacheExpirationMode">
<summary>
The expiration mode of the state cache for this task.
<see cref="P:Microsoft.ApplicationBlocks.UIProcess.Navigator.CacheExpirationMode"/>
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.Navigator.CacheExpirationInterval">
<summary>
The interval used to expire entries in the state cache.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.GraphNavigator.#ctor(System.String)">
<summary>
Creates a graph navigator.
</summary>
<param name="name">The name of the graph navigator in the configuration file.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.GraphNavigator.#ctor(System.String,System.Guid)">
<summary>
Creates a graph navigator that resumes a saved task.
</summary>
<param name="name">The name of the graph navigator in the configuration file.</param>
<param name="taskId">The task ID of a previously saved task.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.GraphNavigator.CreateViewManager(System.String)">
<summary>
Creates the view manager for this navigator.
</summary>
<param name="name">Name of the view manager to create, as defined in the configuration file.</param>
<returns>The view manager.</returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.GraphNavigator.StartTask">
<summary>
Starts a new task on the first view.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.GraphNavigator.StartTask(Microsoft.ApplicationBlocks.UIProcess.ITask,Microsoft.ApplicationBlocks.UIProcess.TaskArgumentsHolder)">
<summary>
Resumes an existing task or begins a new one, passing the TaskArgumentsHolder to the controller of the first view.
</summary>
<param name="task">The task to resume.</param>
<param name="holder">The holder for any arguments to pass to the controller of the first view. Can be null.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.GraphNavigator.StartTask(System.Guid,Microsoft.ApplicationBlocks.UIProcess.TaskArgumentsHolder)">
<summary>
Resumes an existing task, passing the TaskArgumentsHolder to the controller of the first view.
</summary>
<param name="taskId">The identifier of the task to resume.</param>
<param name="holder">The holder for any arguments to pass to the controller of the first view. Can be null.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.GraphNavigator.Navigate(System.String)">
<summary>
Navigates to the next node in the navigation graph.
</summary>
<param name="nextNode">The next node.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.GraphNavigator.ActivateNextView(System.String,System.String)">
<summary>
Activates the next view.
</summary>
<param name="previousView">The view currently displayed.</param>
<param name="currentView">The name of the view to be displayed next.</param>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.GraphNavigator.NavigationSettings">
<summary>
The NavigationSettings from the configuration file.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.GraphNavigator.CacheExpirationMode">
<summary>
The expiration mode of the state cache for this task.
<see cref="P:Microsoft.ApplicationBlocks.UIProcess.GraphNavigator.CacheExpirationMode"/>
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.GraphNavigator.CacheExpirationInterval">
<summary>
The interval used to expire entries in the state cache.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.GraphNavigator.StartView">
<summary>
The first view to show as specified in the configuration file.
</summary>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.OpenNavigator">
<summary>
Navigator used when transitions between views are made. To use this navigator, specify the view names
to transition to.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.OpenNavigator.#ctor(System.String)">
<summary>
Overrides. Initializes a new OpenNavigator.
</summary>
<param name="name">The name of the navigation graph to which open navigation applies.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.OpenNavigator.#ctor(System.String,System.Guid)">
<summary>
Overloaded. Initializes a new OpenNavigator.
</summary>
<param name="name">The name of the navigation graph to which open navigation applies.</param>
<param name="taskId">The task identifier (a GUID associated with the task).</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.OpenNavigator.Navigate(System.String)">
<summary>
Activates the next view.
</summary>
<param name="nextView">The name of the next view to be activated.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.OpenNavigator.StartTask(System.String)">
<summary>
Overloaded. Starts open navigation, beginning with specified first view.
</summary>
<param name="firstView">The name of the first view.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.OpenNavigator.StartTask(Microsoft.ApplicationBlocks.UIProcess.ITask)">
<summary>
Overloaded. Starts open navigation for a specified task.
</summary>
<param name="task">The name of the task.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.OpenNavigator.StartTask(System.String,Microsoft.ApplicationBlocks.UIProcess.ITask)">
<summary>
Overloaded. Starts open navigation beginning with the specified first view for the specified task.
</summary>
<param name="firstView">The name of the first view.</param>
<param name="task">The name of the task.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.OpenNavigator.StartTask(Microsoft.ApplicationBlocks.UIProcess.ITask,Microsoft.ApplicationBlocks.UIProcess.TaskArgumentsHolder)">
<summary>
Overloaded. Starts open navigation for the specified task.
</summary>
<param name="task">The name of the task.</param>
<param name="args">Additional navigation arguments.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.OpenNavigator.StartTask(System.String,Microsoft.ApplicationBlocks.UIProcess.ITask,Microsoft.ApplicationBlocks.UIProcess.TaskArgumentsHolder)">
<summary>
Overloaded. Starts open navigation, beginning with the first view for the specified task.
</summary>
<param name="firstView">The name of the first view.</param>
<param name="task">The name of the task.</param>
<param name="args">Additional navigation arguments.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.OpenNavigator.StartTask(System.Guid)">
<summary>
Overloaded. Starts open navigation for the specified task identifier.
</summary>
<param name="taskId">The task identifier (a GUID associated with the task).</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.OpenNavigator.StartTask(System.Guid,Microsoft.ApplicationBlocks.UIProcess.TaskArgumentsHolder)">
<summary>
Overloaded. Starts open navigation for the specified task identifier.
</summary>
<param name="taskId">The task identifier (a GUID associated with the task).</param>
<param name="args">Additional navigation arguments.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.OpenNavigator.StartTask(System.String,Microsoft.ApplicationBlocks.UIProcess.TaskArgumentsHolder)">
<summary>
Overloaded. Starts open navigation beginning with the first view.
</summary>
<param name="firstView">The name of the first view.</param>
<param name="args">Additional navigation arguments.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.OpenNavigator.CreateState">
<summary>
Overrides. Creates a new <see cref="T:Microsoft.ApplicationBlocks.UIProcess.State"/> for OpenNavigation.
</summary>
<returns></returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.OpenNavigator.LoadState(System.Guid)">
<summary>
Overrides. Loads the <see cref="T:Microsoft.ApplicationBlocks.UIProcess.State"/> of the OpenNavigator for the given task ID.
</summary>
<param name="taskId">The task identifier (a GUID associated with the task).</param>
<returns>The loaded state.</returns>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.OpenNavigator.CacheExpirationInterval">
<summary>
Gets the Timespan object that represents the life span of the OpenNavigator.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.OpenNavigator.CacheExpirationMode">
<summary>
Gets the <see cref="T:Microsoft.ApplicationBlocks.UIProcess.CacheExpirationMode"/> for the OpenNavigator.
</summary>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.UserControlsNavigator">
<summary>
Provides navigation services for Windows Forms applications with UserControls.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.UserControlsNavigator.#ctor(System.String)">
<summary>
Creates a HostedControlsNavigator.
</summary>
<param name="name">The name of the navigator from the configuration file.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.UserControlsNavigator.Navigate(System.String)">
<summary>
Navigates to the next node or view.
</summary>
<param name="nextNode">The node or view to navigate to.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.UserControlsNavigator.StartTask(Microsoft.ApplicationBlocks.UIProcess.ITask)">
<summary>
Starts or resumes a task.
</summary>
<param name="task">The task to start or resume.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.UserControlsNavigator.StartTask(Microsoft.ApplicationBlocks.UIProcess.ITask,Microsoft.ApplicationBlocks.UIProcess.TaskArgumentsHolder)">
<summary>
Starts or resumes a task, and passes optional arguments to the first view.
</summary>
<param name="task">The task to start or resume.</param>
<param name="args">Optional arguments to pass to the first view.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.UserControlsNavigator.StartTask(System.Guid,Microsoft.ApplicationBlocks.UIProcess.TaskArgumentsHolder)">
<summary>
Resumes a saved task and passes optional arguments to the first view.
</summary>
<param name="taskId">The task identifier of the task to resume.</param>
<param name="args">Optional arguments to pass to the first view.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.UserControlsNavigator.GetViewNameFromNodeName(System.String)">
<summary>
Returns the name of a child view from the name of a node.
</summary>
<param name="nodeName"></param>
<returns></returns>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.UserControlsNavigator.CacheExpirationMode">
<summary>
The expiration mode of the state cache for this task.
<see cref="P:Microsoft.ApplicationBlocks.UIProcess.UserControlsNavigator.CacheExpirationMode"/>
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.UserControlsNavigator.CacheExpirationInterval">
<summary>
The interval used to expire entries in the state cache.
</summary>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.WizardNavigator">
<summary>
Determines navigation behavior for wizards.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.WizardNavigator.#ctor(System.String)">
<summary>
Initializes a new instance of WizardNavigator with the given name.
</summary>
<param name="name">The name of the wizard.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.WizardNavigator.CreateViewManager(System.String)">
<summary>
Creates the appropiate <see cref="T:Microsoft.ApplicationBlocks.UIProcess.IViewManager"/> for a wizard.
<remarks>For the WizardNavigator, the IViewManager is always a <see cref="T:Microsoft.ApplicationBlocks.UIProcess.WizardViewManager"/></remarks>
</summary>
<param name="name">The name of the IViewManager to create.</param>
<returns>A WizardViewManager.</returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.WizardNavigator.ActivateNextView(System.String,System.String)">
<summary>
Displays the next view in the wizard.
</summary>
<param name="previousView">The name of the previous view.</param>
<param name="currentView">The name of the view to be navigated to (the next view).</param>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.WizardNavigator.LastViewName">
<summary>
Returns the name of the last view in the wizard.
</summary>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.CryptHelper">
<summary>
Helper class used to perform encryption/decryption of information.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.CryptHelper.#ctor(System.String)">
<summary>
Initializes a new instance of the CryptHelper class.
</summary>
<param name="registryPath">Path to the registry key that contains the key used to
perform encryption and decription.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.CryptHelper.Encrypt(System.Byte[],System.Byte[])">
<summary>
Encrypts a stream of bytes by using a TripleDES symmetric algorithm.
</summary>
<param name="plainValue">Stream of bytes to be encrypted.</param>
<param name="key">Symmetric algorithm key.</param>
<returns>An encrypted stream of bytes.</returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.CryptHelper.Decrypt(System.Byte[],System.Byte[])">
<summary>
Decrypts an encrypted stream of bytes by using a TripleDES symmetric algorithm.
</summary>
<param name="cipherValue">The encrypted stream of bytes to be decrypted.</param>
<param name="key">Symmetric algorithm key.</param>
<returns>A stream of bytes.</returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.CryptHelper.Encrypt(System.Byte[])">
<summary>
Encrypts a stream of bytes by using a TripleDES symmetric algorithm.
</summary>
<param name="plainValue">Stream of bytes to be encrypted.</param>
<returns>An encrypted stream of bytes.</returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.CryptHelper.Decrypt(System.Byte[])">
<summary>
Decrypts an encrypted stream of bytes by using a TripleDES symmetric algorithm.
</summary>
<param name="cipherValue">The encrypted stream of bytes to be decrypted.</param>
<returns>A stream of bytes.</returns>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.IsolatedStoragePersistence">
<summary>
IStatePersistence implementation for isolated storage.
</summary>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.IStatePersistence">
<summary>
This interface defines how State and Task objects can be dehydrated or rehydrated by the Manager object.
It allows you to abstract storage so that you can use SQL, file, binary, XML, or whatever.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.IStatePersistence.Init(System.Collections.Specialized.NameValueCollection)">
<summary>
Initializes the provider.
</summary>
<param name="statePersistenceParameters">The provider settings.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.IStatePersistence.Save(Microsoft.ApplicationBlocks.UIProcess.State)">
<summary>
Serializes and saves the state in a specific storage location.
</summary>
<param name="state">A valid State object.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.IStatePersistence.Load(System.Guid)">
<summary>
Restores and deserializes the state from a specific storage location.
</summary>
<param name="taskId">A task identifier (a GUID associated with the task).
This identifier is used to restore a saved state.
</param>
<remarks>If the task does not exist, then a null value is returned.</remarks>
<returns>A valid State object.</returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.IStatePersistence.Remove(System.Guid)">
<summary>
Deletes a stored state object from a specific storage location.
</summary>
<param name="taskId">A task identifier (a GUID associated with the task).
This identifier is used to remove a saved state.
</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.IsolatedStoragePersistence.#ctor">
<summary>
Creates a new instance of an IsolatedStoragePersistence object.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.IsolatedStoragePersistence.Init(System.Collections.Specialized.NameValueCollection)">
<summary>
Used to pass extra parameters from the configuration file to this instance.
</summary>
<param name="statePersistenceParameters">Any extra attributes found in the configuration file.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.IsolatedStoragePersistence.Save(Microsoft.ApplicationBlocks.UIProcess.State)">
<summary>
Saves the State object to isolated storage.
</summary>
<param name="state">A valid State object.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.IsolatedStoragePersistence.Load(System.Guid)">
<summary>
Loads the state from isolated storage.
</summary>
<param name="taskId">The identifier of the task to load the state for.</param>
<returns>A valid State object.</returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.IsolatedStoragePersistence.Remove(System.Guid)">
<summary>
Removes (deletes) the State object from isolated storage.
</summary>
<param name="taskId">The identifier of the task to remove the state for.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.IsolatedStoragePersistence.ToByteArray(Microsoft.ApplicationBlocks.UIProcess.State)">
<summary>
Converts a State object to an array of bytes.
</summary>
<param name="state">The state object to convert.</param>
<returns>The array of bytes.</returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.IsolatedStoragePersistence.FromByteArray(System.Byte[])">
<summary>
Deserializes a byte array into a State object.
</summary>
<param name="serializedObj">Byte array that will be deserialized into a State object.</param>
<returns>A valid State object.</returns>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.MemoryStatePersistence">
<summary>
This provides simple memory-based state persistence for Windows Forms applications.
DO NOT use it on the server; the locking mechanism will cause a bottleneck for
busy Web applications.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.MemoryStatePersistence.Init(System.Collections.Specialized.NameValueCollection)">
<summary>
UIP uses this method to pass extra configuration information to the persistence provider.
</summary>
<param name="statePersistenceParameters">Collection of configuration information to be used by
the persistence provider.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.MemoryStatePersistence.Load(System.Guid)">
<summary>
Loads the saved state for this task.
</summary>
<param name="taskId">The task identifier (a GUID associated with the task).</param>
<returns></returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.MemoryStatePersistence.Save(Microsoft.ApplicationBlocks.UIProcess.State)">
<summary>
Saves the State object in memory.
</summary>
<param name="state">A valid State object.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.MemoryStatePersistence.Remove(System.Guid)">
<summary>
Removes (deletes) the State object from memory.
</summary>
<param name="taskId">The task identifier (a GUID associated with the task). The State object for this task will be removed.</param>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.SecureIsolatedStoragePersistence">
<summary>
The IStatePersistence implementation.
This provider encrypts the serialized data by using a symmetric algorithm.
The algorithm key is obtained from the LOCAL_MACHINE hive in the Windows registry.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.SecureIsolatedStoragePersistence.Init(System.Collections.Specialized.NameValueCollection)">
<summary>
The possible provider config attributes are:
- registryPath: Specifies the registry key path where the
encryption symmetric key is stored.
</summary>
<param name="statePersistenceParameters">The collection of configuration information to be used by
the persistence provider.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.SecureIsolatedStoragePersistence.FromByteArray(System.Byte[])">
<summary>
Deserializes an encrypted byte array into a State object.
</summary>
<param name="serializedObject">Encrypted byte array that will be deserialized to a State object.</param>
<returns>A valid State object.</returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.SecureIsolatedStoragePersistence.ToByteArray(Microsoft.ApplicationBlocks.UIProcess.State)">
<summary>
Converts a State object to an encrypted array of bytes.
</summary>
<param name="state">The state object to convert.</param>
<returns>The array of encrypted bytes that represent the serialized state object.</returns>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.SecureSqlServerPersistState">
<summary>
IStatePersistence implementation.
This provider encrypts the serialized data by using a symmetric algorithm.
The algorithm key is obtained from the LOCAL_MACHINE hive in the Windows registry.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.SecureSqlServerPersistState.Init(System.Collections.Specialized.NameValueCollection)">
<summary>
The possible provider configuration attributes are:
connectionString: Specifies the database connection string.
registryPath: Specifies the registry key path where the
encryption symmetric key is stored.
</summary>
<param name="statePersistenceParameters">The collection of configuration information to be used by
the persistence provider.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.SecureSqlServerPersistState.Save(Microsoft.ApplicationBlocks.UIProcess.State)">
<summary>
Saves the State object in a SQL Server database.
</summary>
<remarks>The provider encrypts the serialized state before storing it in the database.</remarks>
<param name="state">A valid State object.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.SecureSqlServerPersistState.Load(System.Guid)">
<summary>
Loads an existing State object from a SQL Server database.
</summary>
<remarks>The provider decrypts the serialized state before restoring it.</remarks>
<param name="taskId">The task identifier (a GUID associated with the task).</param>
<returns>A valid State object.</returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.SecureSqlServerPersistState.Remove(System.Guid)">
<summary>
Removes secure state information from the SQL Server database.
</summary>
<param name="taskId">The task identifier (a GUID associated with the task).</param>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.SessionStatePersistence">
<summary>
This class provides simple session-based state persistence for Web applications.
It pushes state directly to session variables keyed to the task GUID.
It is useful for applications where state might be ephemeral and not worth saving in a SQL database.
It is also useful for Web farm applications, where multiple front-end servers need to see the same state.
In this case, ASP Session would be used either as a state server OR in SQL session mode, and this
persistence provider would piggyback on ASP Session.
By using this class, you can easily migrate applications to non-ASP by replacing the
state persistence provider (and by completing other normal, necessary changes).
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.SessionStatePersistence.#ctor">
<summary>
Creates a new instance of a session state persistence provider.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.SessionStatePersistence.Init(System.Collections.Specialized.NameValueCollection)">
<summary>
Initializes the state persistence provider.
</summary>
<param name="statePersistenceParameters">The provider settings.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.SessionStatePersistence.Load(System.Guid)">
<summary>
Loads state from the Session object.
</summary>
<param name="taskId">The task identifier (a GUID associated with the task). The state of this task will be loaded.</param>
<returns></returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.SessionStatePersistence.Save(Microsoft.ApplicationBlocks.UIProcess.State)">
<summary>
Saves state to the Session object.
</summary>
<param name="inState">The state to save.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.SessionStatePersistence.Remove(System.Guid)">
<summary>
Removes (deletes) state from the Session object.
</summary>
<param name="taskId">The task identifier (a GUID associated with the task). The state of this task will be removed.</param>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.SqlServerPersistState">
<summary>
IStatePersistence SQL Server implementation.
This provider uses SQL Server storage to dehydrate and rehydrate State objects.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.SqlServerPersistState.#ctor">
<summary>
Initializes a new instance of the SqlServerPersistState class.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.SqlServerPersistState.Init(System.Collections.Specialized.NameValueCollection)">
<summary>
The possible provider configuration attributes are:
connectionString: Specifies the database connection string.
</summary>
<param name="statePersistenceParameters">Collection of configuration information to be used by
the persistence provider.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.SqlServerPersistState.Save(Microsoft.ApplicationBlocks.UIProcess.State)">
<summary>
Saves the State object in a SQL Server database.
</summary>
<param name="state">A valid State object.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.SqlServerPersistState.Load(System.Guid)">
<summary>
Loads an existing State object from a SQL Server database.
</summary>
<param name="taskId">The task identifier (a GUID associated with the task).</param>
<returns>A valid State object.</returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.SqlServerPersistState.Remove(System.Guid)">
<summary>
Removes state information from the database.
</summary>
<param name="taskId">The task identifier (a GUID associated with the task). State information for this task will be removed.</param>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.IViewManager">
<summary>
Represents a view manager.
Each type of application has an associated view manager, making it
easier to add application types.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.IViewManager.StoreProperty(System.Guid,System.String,System.Object)">
<summary>
Stores a property in the view manager.
Each task has its own properties.
</summary>
<remarks>Property storage is a view manager responsibility.</remarks>
<param name="name">The property name.</param>
<param name="taskId">The task identifier (a GUID associated with the task).</param>
<param name="value">The property value.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.IViewManager.ActivateView(System.String,System.String,Microsoft.ApplicationBlocks.UIProcess.Navigator)">
<summary>
Activates the specified view.
</summary>
<param name="previousView">The view currently displayed.</param>
<param name="view">The name of the view to be displayed next.</param>
<param name="context">The context in which the view is activated.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.IViewManager.ActivateView(System.String,System.String,Microsoft.ApplicationBlocks.UIProcess.Navigator,Microsoft.ApplicationBlocks.UIProcess.TaskArgumentsHolder)">
<summary>
Activates the specified view.
</summary>
<param name="previousView">The view currently displayed.</param>
<param name="view">The name of the view to be displayed next.</param>
<param name="context">The context in which the view is activated.</param>
<param name="args">Optional arguments passed to the <code>Initialize</code> method on the view.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.IViewManager.IsRequestCurrentView(Microsoft.ApplicationBlocks.UIProcess.IView,System.String)">
<summary>
Utility method that checks requests to ensure that the requested view and current view match.
</summary>
<param name="view">The IView requested.</param>
<param name="stateViewName">The view name saved in the state.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.IViewManager.GetViewNameForCurrentRequest(Microsoft.ApplicationBlocks.UIProcess.IView)">
<summary>
Utility method that checks the request and gets the view name that corresponds with the request.
This is used primarily to enable Back button support.
</summary>
<param name="currentView"></param>
<returns></returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.IViewManager.GetCurrentTasks">
<summary>
Gets the running tasks in the manager.
</summary>
<returns>An array with the task identifiers.</returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.IViewManager.GetActiveViewCount">
<summary>
Gets the number of active views in the manager.
</summary>
<returns>The count.</returns>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.SessionMoniker">
<summary>
Internal class used to store session information.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.SessionMoniker.IsMonikerValid(System.String)">
<summary>
Tests a moniker retrieved from context to see if it matches the NavGraphName:CurrentViewName:TaskGuid pattern.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.SessionMoniker.GetFromSession(System.Guid)">
<summary>
Gets the session moniker related to the specified task.
</summary>
<param name="taskId">The task identifier (a GUID associated with the task). The session moniker for this task will be retrieved.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.SessionMoniker.GetAllFromSession">
<summary>
Gets all session monikers actually stored in the user session.
</summary>
<returns>An array of session monikers.</returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.SessionMoniker.StoreInSession">
<summary>
Stores the session moniker in the user session.
</summary>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.WebFormViewManager">
<summary>
Provides methods to manipulate WebForm views.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.WebFormViewManager.#ctor">
<summary>
Initializes a new instance of a WebFormViewManager
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.WebFormViewManager.ActivateView(System.String,System.Guid,System.String,System.String)">
<summary>
Activates a specific view.
</summary>
<param name="previousView">The view actually displayed.</param>
<param name="taskId">An existing task identifier (a GUID associated with the task).</param>
<param name="navGraph">A configured navigation graph name.</param>
<param name="view">The name of the view to be displayed.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.WebFormViewManager.ActivateView(System.String,System.String,Microsoft.ApplicationBlocks.UIProcess.Navigator,Microsoft.ApplicationBlocks.UIProcess.TaskArgumentsHolder)">
<summary>
Activates a specific view.
</summary>
<param name="previousView">The view actually displayed.</param>
<param name="view">The name of the view to be displayed.</param>
<param name="navigator">The navigator requesting the transition.</param>
<param name="args">Not used in this implementation of ActivateView.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.WebFormViewManager.ActivateView(System.String,System.String,Microsoft.ApplicationBlocks.UIProcess.Navigator)">
<summary>
Activates a specific view.
</summary>
<param name="previousView">The view actually displayed.</param>
<param name="view">The name of the view to be displayed.</param>
<param name="navigator">The navigator requesting the transition.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.WebFormViewManager.StoreProperty(System.Guid,System.String,System.Object)">
<summary>
Stores a property in the view manager.
Each task has its own properties.
</summary>
<remarks>Property storage is a view manager responsibility.</remarks>
<param name="taskId">The task identifier (a GUID associated with the task).</param>
<param name="name">The property name.</param>
<param name="value">The property value.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.WebFormViewManager.IsRequestCurrentView(Microsoft.ApplicationBlocks.UIProcess.IView,System.String)">
<summary>
A utility method that checks Web requests to ensure that the requested page and current view match.
If a user bookmarks page D, then proceeds to page F, and then returns to the bookmark, the
state, when loaded, will have F as the current view.
Any submissions on page D will fail, because the navigation graph may not have appropriate view-navigateResult pairs.
Therefore, you should code defensively against this. Check the current page, check the referring page, andc heck the state object's current view.
</summary>
<param name="view">The next view.</param>
<param name="stateViewName">The view saved in the state.</param>
<returns></returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.WebFormViewManager.GetViewNameForCurrentRequest(Microsoft.ApplicationBlocks.UIProcess.IView)">
<summary>
Returns the name of the view that is being requested by the browser. This method has been implemented
to aid in Back button support functionality.
</summary>
<param name="currentView">View currently executing.</param>
<returns>Name of the view requested by browser.</returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.WebFormViewManager.GetCurrentTasks">
<summary>
Gets the running tasks in the manager.
</summary>
<returns>An array with the task identifiers.</returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.WebFormViewManager.GetActiveView">
<summary>
Not implemented for WebFormViewManager.
</summary>
<returns>Null.</returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.WebFormViewManager.GetActiveViewCount">
<summary>
Not implemented for WebFormViewManager.
</summary>
<returns>0</returns>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.WindowsFormViewManager">
<summary>
Provides methods to manipulate Windows Form views.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.WindowsFormViewManager.#ctor">
<summary>
Default constructor.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.WindowsFormViewManager.StoreProperty(System.Guid,System.String,System.Object)">
<summary>
Stores a property in the view manager.
Each task has its own properties.
</summary>
<remarks>Property storage is a view manager responsibility.</remarks>
<param name="taskId">The task identifier (a GUID associated with the task).</param>
<param name="name">The property name.</param>
<param name="value">The property value.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.WindowsFormViewManager.ActivateView(System.String,System.String,Microsoft.ApplicationBlocks.UIProcess.Navigator)">
<summary>
Activates a specific view.
</summary>
<param name="previousView">The view currently displayed.</param>
<param name="view">The name of the view to be displayed next.</param>
<param name="navigator">The navigator.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.WindowsFormViewManager.ActivateView(System.String,System.String,Microsoft.ApplicationBlocks.UIProcess.Navigator,Microsoft.ApplicationBlocks.UIProcess.TaskArgumentsHolder)">
<summary>
Activates a specific view with activation arguments.
</summary>
<param name="previousView">The view currently displayed.</param>
<param name="view">The name of the view to be displayed next.</param>
<param name="navigator">The navigator.</param>
<param name="args">The arguments for the next view.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.WindowsFormViewManager.IsRequestCurrentView(Microsoft.ApplicationBlocks.UIProcess.IView,System.String)">
<summary>
Required for Web applications only.
<remark>Not implemented in WinFormViewManager.</remark>
</summary>
<param name="view"></param>
<param name="stateViewName"></param>
<returns></returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.WindowsFormViewManager.GetViewNameForCurrentRequest(Microsoft.ApplicationBlocks.UIProcess.IView)">
<summary>
Required for Web applications only.
<remark>Not implemented in WinFomViewManager.</remark>
</summary>
<param name="currentView">The current view.</param>
<returns></returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.WindowsFormViewManager.GetCurrentTasks">
<summary>
Gets the running tasks in the manager.
</summary>
<returns>An array with the task identifiers.</returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.WindowsFormViewManager.GetCurrentViews(System.Guid)">
<summary>
For a given task, returns a hash table composed of WinFormViews keyed by name.
</summary>
<param name="taskId">The task identifier (a GUID associated with the task).</param>
<returns>A collection of IViews.</returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.WindowsFormViewManager.Form_Activated(System.Object,System.EventArgs)">
<summary>
Updates the current view.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.WindowsFormViewManager.Form_Closed(System.Object,System.EventArgs)">
<summary>
Removes the closed form from the collection of active forms.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.WindowsFormViewManager.GetCurrentControls(System.Guid)">
<summary>
For a given task, returns a hash table composed of WinFormControlViews keyed by name.
</summary>
<param name="taskId">The task identifier (a GUID associated with the task).</param>
<returns>A collection of IViews.</returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.WindowsFormViewManager.GetActiveViewCount">
<summary>
The number of currently active views.
</summary>
<returns>The view count.</returns>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.WizardViewManager">
<summary>
The WizardViewManager is intended to provide an implementation of the
<see cref="T:Microsoft.ApplicationBlocks.UIProcess.IViewManager"/> interface
specifically for wizard functionality. It provides methods for control navigation between <see cref="T:Microsoft.ApplicationBlocks.UIProcess.IView"/>
implementations loaded in the <see cref="T:Microsoft.ApplicationBlocks.UIProcess.WizardContainer"/>.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.WizardViewManager.#ctor(Microsoft.ApplicationBlocks.UIProcess.NodeSettings[])">
<summary>
Initializes a new instance of WizardViewManager.
</summary>
<param name="settings">The array of NodeSettings that will be used to construct the
<see cref="T:Microsoft.ApplicationBlocks.UIProcess.WindowsFormView"/> that will make up the forms within the wizard.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.WizardViewManager.StoreProperty(System.Guid,System.String,System.Object)">
<summary>
Required by interface contract, but implementation is not required for the WizardViewManager.
</summary>
<remarks>The property storage is a view manager responsibility.</remarks>
<param name="taskId">The task identifier (a GUID associated with the task).</param>
<param name="name">The property name.</param>
<param name="value">The property value.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.WizardViewManager.GetViewNameForCurrentRequest(Microsoft.ApplicationBlocks.UIProcess.IView)">
<summary>
This method applies only to the <see cref="T:Microsoft.ApplicationBlocks.UIProcess.WebFormViewManager"/>
and is not implemented for this class.
</summary>
<param name="currentView"></param>
<returns></returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.WizardViewManager.ActivateView(System.String,System.String,Microsoft.ApplicationBlocks.UIProcess.Navigator)">
<summary>
Activates a specific view.
</summary>
<param name="previousView">The view that is currently active.</param>
<param name="viewName">The view name to be activated.</param>
<param name="navigator">The navigator.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.WizardViewManager.ActivateView(System.String,System.String,Microsoft.ApplicationBlocks.UIProcess.Navigator,Microsoft.ApplicationBlocks.UIProcess.TaskArgumentsHolder)">
<summary>
Activates a specific view with activation arguments.
</summary>
<param name="previousView">The view that is currently active.</param>
<param name="viewName">The view name to be activated.</param>
<param name="navigator">The navigator.</param>
<param name="args">The arguments for the next view.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.WizardViewManager.IsRequestCurrentView(Microsoft.ApplicationBlocks.UIProcess.IView,System.String)">
<summary>
Required for Web applications only.
</summary>
<param name="view">The next view.</param>
<param name="stateViewName">The view saved in the state.</param>
<returns></returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.WizardViewManager.GetCurrentTasks">
<summary>
The managed tasks running as wizards.
</summary>
<returns></returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.WizardViewManager.GetActiveViewCount">
<summary>
The number of wizards that are currently active.
</summary>
<returns></returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.WizardViewManager.GetActiveView(System.Guid)">
<summary>
The IView currently displayed in the wizard for a given task.
</summary>
<param name="taskId">A task identifier (a GUID associated with the task).</param>
<returns></returns>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.IView">
<summary>
Represents a view used in Web and Windows applications.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.IView.Enable(System.Boolean)">
<summary>
Called when a WinFormControlView gains or loses focus.
</summary>
<param name="enabled">True if gaining focus. False otherwise.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.IView.Initialize(Microsoft.ApplicationBlocks.UIProcess.TaskArgumentsHolder,Microsoft.ApplicationBlocks.UIProcess.ViewSettings)">
<summary>
Called after the view manager instantiates the view, but before calling <code>Show().</code>
</summary>
<param name="args">Optional arguments passed in when starting the task.</param>
<param name="settings">The ViewSettings.</param>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.IView.Controller">
<summary>
Gets the current view controller.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.IView.ViewName">
<summary>
Gets the view name.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.IView.TaskId">
<summary>
Gets the task identifier related to this view.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.IView.Navigator">
<summary>
Gets the context in which the view is executing.
</summary>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.WebFormView">
<summary>
Represents a view used in Web applications.
</summary>
</member>
<member name="F:Microsoft.ApplicationBlocks.UIProcess.WebFormView.CurrentTaskKey">
<summary>
The QueryString key used to get the current task identifier.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.WebFormView.#ctor">
<summary>
Default constructor.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.WebFormView.Enable(System.Boolean)">
<summary>
No implementation for this in WebFormViews.
</summary>
<param name="enabled"></param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.WebFormView.Initialize(Microsoft.ApplicationBlocks.UIProcess.TaskArgumentsHolder,Microsoft.ApplicationBlocks.UIProcess.ViewSettings)">
<summary>
Initializes the WebFormView.
</summary>
<param name="args">The initialization arguments.</param>
<param name="settings">The settings for the view.</param>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.WebFormView.Controller">
<summary>
Gets the view controller.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.WebFormView.TaskId">
<summary>
Gets the task identifier related to this view.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.WebFormView.ViewName">
<summary>
Gets the view name.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.WebFormView.Navigator">
<summary>
Gets the navigator used by this WebFormView.
</summary>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.WindowsFormControlView">
<summary>
Represents a view used in a Windows applications.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.WindowsFormControlView.#ctor">
<summary>
Constructor.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.WindowsFormControlView.Enable(System.Boolean)">
<summary>
True enables the WinFormControlView. False disables the WinFormView.
</summary>
<param name="enabled"></param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.WindowsFormControlView.Initialize(Microsoft.ApplicationBlocks.UIProcess.TaskArgumentsHolder,Microsoft.ApplicationBlocks.UIProcess.ViewSettings)">
<summary>
Initializes the WinFormControlView.
</summary>
<param name="args">The initialization arguments.</param>
<param name="settings">The settings for the view.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.WindowsFormControlView.WinFormControlLoad(System.Object,System.EventArgs)">
<summary>
Occurs when the WinFormControl is loaded.
</summary>
<param name="sender">The source of the event.</param>
<param name="e">The arguments for the event.</param>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.WindowsFormControlView.Controller">
<summary>
Gets the controller for this WinFormControlView.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.WindowsFormControlView.ViewName">
<summary>
Gets the name of this WinFormControlView.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.WindowsFormControlView.TaskId">
<summary>
Gets the UIProcess initiating task that owns this WinFormControlView.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.WindowsFormControlView.Navigator">
<summary>
Gets the navigator used by the WinFormControlView.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.WindowsFormControlView.InternalTaskId">
<summary>
Gets the current task identifier.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.WindowsFormControlView.InternalNavigationGraph">
<summary>
Gets the current navigation graph.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.WindowsFormControlView.InternalViewName">
<summary>
Gets the view name.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.WindowsFormControlView.InternalNavigator">
<summary>
Gets the navigator used by the WinFormControlView.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.WindowsFormControlView.InternalController">
<summary>
Gets the controller used by the WinFormControlView.
</summary>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.WindowsFormView">
<summary>
Represents a view used in Windows applications.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.WindowsFormView.#ctor">
<summary>
Constructor.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.WindowsFormView.Enable(System.Boolean)">
<summary>
True enables the WinFormView. False disables the WinFormView.
</summary>
<param name="enabled"></param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.WindowsFormView.Initialize(Microsoft.ApplicationBlocks.UIProcess.TaskArgumentsHolder,Microsoft.ApplicationBlocks.UIProcess.ViewSettings)">
<summary>
Initializes the WinFormView.
</summary>
<param name="args">The initialization arguments.</param>
<param name="settings">The settings for the view.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.WindowsFormView.WinFormViewOnLoad(System.Object,System.EventArgs)">
<summary>
Occurs when the WinFormView loads.
</summary>
<param name="source">The source of the event.</param>
<param name="e">The event arguments.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.WindowsFormView.JoinParent">
<summary>
Attaches this WinFormView to a parent form.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.WindowsFormView.LeaveParent">
<summary>
Detaches this WinFormView from its parent form.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.WindowsFormView.TaskId">
<summary>
Gets the task identifier related to this view.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.WindowsFormView.ViewName">
<summary>
Gets the view name.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.WindowsFormView.Controller">
<summary>
Gets the view controller.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.WindowsFormView.Navigator">
<summary>
Gets the <see cref="T:Microsoft.ApplicationBlocks.UIProcess.Navigator"/> associated with this WinFormView.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.WindowsFormView.InternalTaskId">
<summary>
Gets the current task identifier.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.WindowsFormView.InternalNavigationGraph">
<summary>
Gets the current navigation graph.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.WindowsFormView.InternalViewName">
<summary>
Gets the view name.
</summary>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.WizardButtons">
<summary>
WizardButtons encapsulates the Cancel, Back, Next, and Finish user interface elements.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.WizardButtons.#ctor">
<summary>
Constructor.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.WizardButtons.Dispose(System.Boolean)">
<summary>
Cleans up any resources being used.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.WizardButtons.InitializeComponent">
<summary>
Required method for designer support. Do not use the code editor to modify
the contents of this method.
</summary>
</member>
<member name="E:Microsoft.ApplicationBlocks.UIProcess.WizardButtons.OnCancel">
<summary>
Event for canceling the wizard.
</summary>
</member>
<member name="E:Microsoft.ApplicationBlocks.UIProcess.WizardButtons.OnFinish">
<summary>
Event for finishing the wizard.
</summary>
</member>
<member name="E:Microsoft.ApplicationBlocks.UIProcess.WizardButtons.OnBack">
<summary>
Event for back wizard functionality.
</summary>
</member>
<member name="E:Microsoft.ApplicationBlocks.UIProcess.WizardButtons.OnNext">
<summary>
Event for next wizard functionality.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.WizardButtons.CancelEnabled">
<summary>
Property that enables or disables the Cancel button.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.WizardButtons.BackEnabled">
<summary>
Property that enables or disables the Back button.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.WizardButtons.NextEnabled">
<summary>
Property that enables or disables the Next button.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.WizardButtons.FinishEnabled">
<summary>
Property that enables or disables the Finish button.
</summary>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.WizardButtons.CancelEventHandler">
<summary>
Delegate for handling cancel events.
</summary>
<param name="sender">The source of the event.</param>
<param name="e">An EventArgs that contains the event data.</param>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.WizardButtons.FinishEventHandler">
<summary>
Delegate for handling finish events.
</summary>
<param name="sender">The source of the event.</param>
<param name="e">An EventArgs that contains the event data.</param>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.WizardButtons.BackEventHandler">
<summary>
Delegate for handling back events.
</summary>
<param name="sender">The source of the event.</param>
<param name="e">An EventArgs that contains the event data.</param>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.WizardButtons.NextEventHandler">
<summary>
Delegate for handling next events.
</summary>
<param name="sender">The source of the event.</param>
<param name="e">An EventArgs that contains the event data.</param>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.WizardContainer">
<summary>
Class that is encapsulates the views for a wizard navigator.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.WizardContainer.#ctor(Microsoft.ApplicationBlocks.UIProcess.IView[],Microsoft.ApplicationBlocks.UIProcess.Navigator)">
<summary>
Initializes a new instance of a wizard container.
</summary>
<param name="views">All of the views that will be contained within this container.</param>
<param name="navigator">The wizard navigator managing the task.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.WizardContainer.GetActiveView">
<summary>
Gets the view that is currently active in the wizard.
</summary>
<returns>The view that is currently active.</returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.WizardContainer.Dispose(System.Boolean)">
<summary>
Releases all resources used by the wizard container.
</summary>
<param name="disposing">The object that is being explicitly disposed of.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.WizardContainer.Activate(System.String)">
<summary>
Activates a specific view in the wizard by using the name of the view.
</summary>
<param name="viewName">The name of the view to activate.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.WizardContainer.GetCurrentViews">
<summary>
Gets the views that are used within this container.
</summary>
<returns>The views that are used in this container.</returns>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.WizardContainer.TaskId">
<summary>
The task identifier for the wizard.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.WizardContainer.Count">
<summary>
Returns the number of views that are contained within the wizard container.
</summary>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.ControllerBase">
<summary>
This class coordinates the user process.
It represents the controller in a Model-View-Controller pattern.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.ControllerBase.#ctor(Microsoft.ApplicationBlocks.UIProcess.Navigator)">
<summary>
Creates a controller.
</summary>
<param name="navigator">Provides navigation services for the controller.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.ControllerBase.Navigate">
<summary>
Allows for a default Next button that causes the manager to navigate to the next page.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.ControllerBase.Navigate(System.String)">
<summary>
Navigates to the specified view or node.
</summary>
<param name="navigateValue">Name of the node or view to navigate to.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.ControllerBase.SuspendTask">
<summary>
Ends or suspends the current task.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.ControllerBase.OnStartTask(System.String)">
<summary>
Navigates to the next navigation graph.
</summary>
<param name="nextNavigator">Name of the next navigationGraph.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.ControllerBase.OnStartTask(System.String,Microsoft.ApplicationBlocks.UIProcess.TaskArgumentsHolder,Microsoft.ApplicationBlocks.UIProcess.ITask)">
<summary>
Navigates to the next navigation graph.
</summary>
<param name="nextNavigatorName">Name of the next navigation graph.</param>
<param name="taskArguments">A holder for originating the navigation graph and task ID, and an object that
the controller can use to get state information from the previous navigation graph.</param>
<param name="nextTask">Task to be started.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.ControllerBase.EnterTask(Microsoft.ApplicationBlocks.UIProcess.TaskArgumentsHolder)">
<summary>
The UIPManager calls this method when a new task starts.
</summary>
<param name="taskArguments">A holder for originating the navigation graph and task ID, and an object that
the controller can use to get state information from the previous navigation graph.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.ControllerBase.CompleteTask">
<summary>
Completes the task. Completing a task permanently removes any state data for the task.
A completed task cannot be restarted.
</summary>
</member>
<member name="E:Microsoft.ApplicationBlocks.UIProcess.ControllerBase.StartTask">
<summary>
Event raised when a task is being started.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.ControllerBase.State">
<summary>
Gets the controller state.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.ControllerBase.Navigator">
<summary>
The navigator for this task.
</summary>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.ILayoutManager">
<summary>
The interface used to hook a layout manager into the UIP block.
The view manager calls the LayoutControls method after instantiating a view, but before calling <code>Show()</code>.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.ILayoutManager.LayoutControls(System.Windows.Forms.Control)">
<summary>
Performs layout functions on any child control of the parent control.
</summary>
<param name="parentControl">The container on which to perform layout.</param>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.IShutdownUIP">
<summary>
All classes that implement IShutdownUIP can be registered with the
UIPManager. Upon closure of all UIP forms, the Shutdown method will
be called.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.IShutdownUIP.Shutdown">
<summary>
Called when UIP shuts down.
</summary>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.ITask">
<summary>
Defines a Task object that can be passed to UIPManager. This object is used by applications that
must get the task ID for their internal use. For example, if a user logs on and has an associated
shopping cart, when the application redirects to another page, it must retain the task ID to correlate
with the logon.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.ITask.Get">
<summary>Gets the task ID for the logon.</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.ITask.Create(System.Guid)">
<summary>Creates a task ID for the logon. </summary>
<param name="taskId">The task identifier (a GUID associated with the task).</param>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.IWizardViewTransition">
<summary>
Provides method definitions for wizard transitions.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.IWizardViewTransition.DoNext">
<summary>
Transitions to the next view.
</summary>
<returns></returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.IWizardViewTransition.DoBack">
<summary>
Transitions to the previous view.
</summary>
<returns></returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.IWizardViewTransition.DoCancel">
<summary>
Cancels the wizard task.
</summary>
<returns></returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.IWizardViewTransition.DoFinish">
<summary>
Jumps to the finish view.
</summary>
<returns></returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.IWizardViewTransition.WizardActivated">
<summary>
Called when the wizard view is activated.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.IWizardViewTransition.SupportsCancel">
<summary>
Indicates that the wizard view supports cancel behavior.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.IWizardViewTransition.SupportsFinish">
<summary>
Indicates that the wizard view supports finish behavior.
</summary>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.NavigateEventArgs">
<summary>
Arguments passed when the NavigateEvent on <code>UIPManager</code> occurs.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.NavigateEventArgs.#ctor(Microsoft.ApplicationBlocks.UIProcess.State)">
<summary>
Creates a NavigateEventArgs object that contains the state.
</summary>
<param name="state">State of the task.</param>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.NavigateEventArgs.State">
<summary>
The state of the task when the navigate event occurred.
</summary>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.Resource">
<summary>
Helper class used to manage application resources.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.Resource.#ctor">
<summary>
Constructor.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.Resource.GetStream(System.String)">
<summary>
Gets a resource stream with the messages used by the UIP classes.
</summary>
<param name="name">The resource key.</param>
<returns>A resource stream.</returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.Resource.FormatMessage(System.String,System.Object[])">
<summary>
Formats a message stored in the UIP assembly resource file.
</summary>
<param name="key">The resource key.</param>
<param name="format">The format arguments.</param>
<returns>A formatted string.</returns>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.Resource.ResourceManager">
<summary>
Gets a resource manager for the assembly resource file.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.Resource.Item(System.String)">
<summary>
Gets the message with the specified key from the assembly resource file.
</summary>
<param name="key">Key of the item to retrieve from the resource file.</param>
<returns>Value from the resource file identified by the key.</returns>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.Resource.Exceptions">
<summary>
Class used to expose constants that represent keys in the resource file.
</summary>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.StartTaskEventHandler">
<summary>
Represents the method that will handle the StartTask event.
</summary>
<param name="sender">The source of the event.</param>
<param name="e">A StartTaskEventArgs object that contains the event data.</param>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.StartTaskEventArgs">
<summary>
Provides data for the StartTask event.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.StartTaskEventArgs.#ctor(System.String)">
<summary>
Overloaded. Initializes a new StartTaskEventArgs class that assumes chaining of the navigation graphs.
</summary>
<param name="nextNavigationGraphName">The next navigation graph.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.StartTaskEventArgs.#ctor(System.String,Microsoft.ApplicationBlocks.UIProcess.TaskArgumentsHolder,Microsoft.ApplicationBlocks.UIProcess.ITask)">
<summary>
Overloaded. Initializes a new StartTaskEventArgs class that assumes chaining of the navigation graphs, and
the need for all information relevant to having a return pointer on a stack.
</summary>
<param name="nextNavigationGraphName">The next navigation graph.</param>
<param name="taskArguments">The task arguments.</param>
<param name="nextTask">A known point in a previously used navigation graph.</param>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.StartTaskEventArgs.NextNavigationGraph">
<summary>
Gets the next navigation graph name.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.StartTaskEventArgs.TaskArguments">
<summary>
Gets the the task arguments.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.StartTaskEventArgs.NextTask">
<summary>
Gets the next task.
</summary>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.StateChangedEventArgs">
<summary>
Provides data for a StateChanged event.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.StateChangedEventArgs.#ctor(System.String)">
<summary>
Initializes a new StateChangedEventArgs class with a key.
</summary>
<param name="key">The state item key.</param>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.StateChangedEventArgs.Key">
<summary>
Gets the changed state item key.
</summary>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.State">
<summary>
This class maintains user process state. It represents the model in a
Model-View-Controller pattern.
</summary>
<remarks>
This class must be serializable. If a derived class requires a
complex serialization mecanism, then it must implement the
<see cref="T:System.Runtime.Serialization.ISerializable"/> interface.
Derived classes must call the base GetObjectData and serialization constructor appropriately to ensure
full serialization or deserialization.
</remarks>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.State.#ctor(Microsoft.ApplicationBlocks.UIProcess.IStatePersistence)">
<summary>
Constructor.
</summary>
<param name="statePersistenceProvider">A valid state persistence provider.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.State.#ctor">
<summary>
Constructor.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.State.#ctor(System.Guid)">
<summary>
Constructor.
</summary>
<param name="taskId">A task identifier (a GUID associated with the task).</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.State.#ctor(System.Guid,System.String)">
<summary>
Constructor.
</summary>
<param name="taskId">A task identifier (a GUID associated with the task).</param>
<param name="navGraph">A valid navigation navigation graph name.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.State.#ctor(System.Guid,System.String,System.String)">
<summary>
Constructor.
</summary>
<param name="taskId">A task identifier (a GUID associated with the task).</param>
<param name="navGraph">A valid navigation graph name.</param>
<param name="currentView">The current view in the navigation graph.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.State.#ctor(System.Guid,System.String,System.String,System.String,Microsoft.ApplicationBlocks.UIProcess.IStatePersistence)">
<summary>
Constructor.
</summary>
<param name="taskId">A task identifier (a GUID associated with the task).</param>
<param name="navigationGraph">A valid navigation graph name.</param>
<param name="currentView">The current view in the navigation graph.</param>
<param name="navigateValue">Used by the controller to determine which view is next.</param>
<param name="statePersistence">A valid state persistence provider.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.State.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
<summary>
Constructor; required by ISerializable.
</summary>
<param name="serializationInfo">The serialization information.</param>
<param name="context">The streaming context.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.State.GetObjectData(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
<summary>
Required GetObjectData of ISerializable. This packages class information into SerializationInfo.
</summary>
<param name="info"></param>
<param name="context"></param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.State.Accept(Microsoft.ApplicationBlocks.UIProcess.IStatePersistence)">
<summary>
The visitor pattern for StatePersistence.
</summary>
<param name="statePersistence">A valid state persistence provider object.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.State.Save">
<summary>
Stores the state using the persistence provider related to this state.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.State.Delete">
<summary>
Deletes the state from storage using the persistence provider related to this state.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.State.Add(System.String,System.Object)">
<summary>
Adds an element with the specified key to the state.
</summary>
<param name="key">Key used to identify the element in the state.</param>
<param name="value">Element to add to the state.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.State.Remove(System.String)">
<summary>
Removes the element with the specified key from the state.
</summary>
<param name="key">Key of the element to remove from the state.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.State.Contains(System.String)">
<summary>
Determines whether the state contains a specific key.
</summary>
<param name="key">Key to find in the collection.</param>
<returns>True if the key was found; otherwise false.</returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.State.OnClearComplete">
<summary>
Occurs when the state has been cleared.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.State.CopyTo(System.Collections.DictionaryEntry[],System.Int32)">
<summary>
Copies the state elements to a array.
</summary>
<param name="array">The array to copy to. This must be capable of accepting objects of type DictionaryEntry.</param>
<param name="index">The zero-based array where the copying should begin.</param>
</member>
<member name="E:Microsoft.ApplicationBlocks.UIProcess.State.StateChanged">
<summary>
Occurs when the state changes.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.State.NavigateValue">
<summary>
Gets or sets the navigation value. This value determines
which view is the next view in the navigation graph.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.State.NavigationGraph">
<summary>
Gets or sets the state navigation graph.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.State.CurrentView">
<summary>
Gets or sets the current view in the navigation graph.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.State.TaskId">
<summary>
Gets or sets the current task ID.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.State.Item(System.String)">
<summary>
Indexer. Gets the item with the specified key.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.State.SyncRoot">
<summary>
Gets an object that can be used to synchonize access to the state.
</summary>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.State.StateChangedEventHandler">
<summary>
This event is raised when the state has changed. Therefore, the views can refresh themselves to stay synchronized.
</summary>
<param name="sender">The source of the event.</param>
<param name="e">A StateChangedEventArgs object that contains the event data.</param>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.CacheEntry">
<summary>
This class represents an entry in the state cache.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.CacheEntry.#ctor(System.Object,System.DateTime)">
<summary>
Overloaded. Initializes a new CacheEntry class with a value and an expiration time.
</summary>
<param name="value">The item value.</param>
<param name="itemAge">The item age. Specifies that the item expires.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.CacheEntry.#ctor(System.Object)">
<summary>
Overloaded. Initializes a new CacheEntry class that never expires and has a value.
</summary>
<remarks>The item never expires.</remarks>
<param name="value">The item value.</param>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.CacheEntry.IsExpired">
<summary>
Specifies if the item has expired.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.CacheEntry.Value">
<summary>
Gets the item value.
</summary>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.StateCache">
<summary>
Object used to provide caching services for State objects.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.StateCache.#cctor">
<summary>
Static constructor.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.StateCache.CreateCacheEntry(Microsoft.ApplicationBlocks.UIProcess.CacheExpirationMode,System.TimeSpan,System.Object)">
<summary>
Creates a new cache entry.
</summary>
<param name="mode">The cache expiration mode.</param>
<param name="interval">The cache expiration interval.</param>
<param name="cacheValue">The cache value.</param>
<returns>A valid CacheEntry object.</returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.StateCache.LoadFromCache(System.Guid)">
<summary>
Looks up a State object from the cache for the specified navigation graph and task ID.
</summary>
<param name="taskId">The task identifier (a GUID associated with the task).</param>
<returns>The State object.</returns>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.StateCache.PutStateInCache(Microsoft.ApplicationBlocks.UIProcess.State,System.String,System.Boolean)">
<summary>
Stores the state in StateCache.
</summary>
<param name="state">The state to be cached.</param>
<param name="navigationGraph">The name of the navigation graph.</param>
<param name="trackResurection">Indicates when to stop tracking the object. If true, the object is tracked after finalization; if false, the object is tracked only until finalization. </param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.StateCache.PutStateInCache(Microsoft.ApplicationBlocks.UIProcess.State,System.Boolean)">
<summary>
Stores the state in the StateCache.
</summary>
<param name="state">The state to be cached.</param>
<param name="trackResurection">Indicates when to stop tracking the object. If true, the object is tracked after finalization; if false, the object is tracked only until finalization.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.StateCache.RemoveFromCache(System.Guid)">
<summary>
Remove the state for a given task from the StateCache.
</summary>
<param name="taskId">The task identifier (a GUID associated with the task).</param>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.TaskArgumentsHolder">
<summary>
This class hold the arguments that can be passed from one navigation graph to another when chaining use cases.
The data includes a return pointer (the originating graph and task ID) and an object that can be used
to encapsulate data that is passed from one navigation graph to another.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.TaskArgumentsHolder.#ctor(System.Guid,System.String,System.Object)">
<summary>
Initializes a new instance of TaskArgumentsHolder with a task ID, a navigation graph name, and arguments.
</summary>
<param name="originatingTaskID">The originating task identifier (a GUID associated with the task).</param>
<param name="originatingNavGraphName">The originating navigation graph name.</param>
<param name="taskArguments">An object with generic data.</param>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.TaskArgumentsHolder.TaskArguments">
<summary>
Gets or sets an object that can be used
to encapsulate data that is passed from one navigation graph to another.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.TaskArgumentsHolder.OriginatingTaskID">
<summary>
Gets or sets the originating task ID.
</summary>
</member>
<member name="P:Microsoft.ApplicationBlocks.UIProcess.TaskArgumentsHolder.OriginatingNavGraphName">
<summary>
Gets or sets the originating navigation graph name.
</summary>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.UIPException">
<summary>
The UIP main exception.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.UIPException.#ctor">
<summary>
Overloaded. Default Constructor.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.UIPException.#ctor(System.String)">
<summary>
Overloaded. Initializes a new UIPException with the specified message.
</summary>
<param name="msg">Exception message.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.UIPException.#ctor(System.String,System.Exception)">
<summary>
Overloaded. Initializes a new UIPException with the specified message and inner exception.
</summary>
<param name="msg">Exception message.</param>
<param name="inner">Inner exception.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.UIPException.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
<summary>
Deserialization constructor.
</summary>
<param name="info">Holds all of the data needed to serialize or deserialize an object.</param>
<param name="context">The source and destination of a given serialized stream.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.UIPException.GetFirstExceptionMessage(System.Exception)">
<summary>
Returns the first exception information in an exception's stack trace.
</summary>
<param name="e">The exception.</param>
<returns>The first line in the stack trace.</returns>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.UIPManager">
<summary>
This class allows the UIPManager to dispense controllers to views,
sense when controllers have finished, spawn new views,
and coordinate tasks.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.UIPManager.#cctor">
<summary>
Static constructor.
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.UIPManager.RegisterShutdown(Microsoft.ApplicationBlocks.UIProcess.IShutdownUIP)">
<summary>
Adds a shutdown listener that is invoked when all views have been closed.
</summary>
<param name="shutdownListener">The shutdown listener.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.UIPManager.StartNavigationTask(System.String)">
<summary>
Starts a UIProcess for navigation.
</summary>
<param name="navGraph">The name of the navigationGraph element in app.config. </param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.UIPManager.StartNavigationTask(System.String,Microsoft.ApplicationBlocks.UIProcess.ITask)">
<summary>
Starts a UIProcess for navigation.
</summary>
<param name="navGraph">The name of the navigationGraph element in app.config.</param>
<param name="task">The task name.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.UIPManager.StartNavigationTask(System.String,System.Guid)">
<summary>
Starts a UIProcess for navigation.
</summary>
<param name="navGraph">The name of the navigationGraph element in app.config. </param>
<param name="taskId">The task identifier (a GUID associated with the task).</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.UIPManager.StartOpenNavigationTask(System.String,Microsoft.ApplicationBlocks.UIProcess.ITask)">
<summary>
Starts a UIProcess for open navigation.
</summary>
<param name="name">The name of the navigationGraph element in app.config.</param>
<param name="task">The task name.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.UIPManager.StartOpenNavigationTask(System.String,System.Guid)">
<summary>
Starts a UIProcess for open navigation.
</summary>
<param name="name">The name of the navigationGraph element in app.config.</param>
<param name="taskId">The task identifier (a GUID associated with the task).</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.UIPManager.StartOpenNavigationTask(System.String,System.String)">
<summary>
Starts a UIProcess for open navigation.
</summary>
<param name="name">The name of the navigationGraph element in app.config. </param>
<param name="firstViewName">The first view to be activated.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.UIPManager.StartOpenNavigationTask(System.String,System.String,Microsoft.ApplicationBlocks.UIProcess.ITask)">
<summary>
Starts a UIProcess for open navigation.
</summary>
<param name="name">The name of the navigationGraph element in app.config.</param>
<param name="firstViewName">The first view to be activated.</param>
<param name="task">The task name.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.UIPManager.StartUserControlsTask(System.String)">
<summary>
Starts a UIProcess for hosted controls.
</summary>
<param name="name">The name of the hostedControl element in app.config.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.UIPManager.StartUserControlsTask(System.String,Microsoft.ApplicationBlocks.UIProcess.ITask)">
<summary>
Starts a UIProcess for hosted controls.
</summary>
<param name="name">The name of the hostedControl element in app.config.</param>
<param name="task">The task name.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.UIPManager.StartUserControlsTask(System.String,System.Guid)">
<summary>
Starts a UIProcess for hosted controls.
</summary>
<param name="name">The name of the hostedControl element in app.config.</param>
<param name="taskId">The task identifier (a GUID associated with the task).</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.UIPManager.StartUserControlsTask(System.String,Microsoft.ApplicationBlocks.UIProcess.ITask,Microsoft.ApplicationBlocks.UIProcess.TaskArgumentsHolder)">
<summary>
Starts a UIProcess for hosted controls.
</summary>
<param name="name">The name of the hostedControl element in app.config.</param>
<param name="task">The task name.</param>
<param name="args">Arguments to the view.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.UIPManager.StartUserControlsTask(System.String,System.Guid,Microsoft.ApplicationBlocks.UIProcess.TaskArgumentsHolder)">
<summary>
Starts a UIProcess for hosted controls.
</summary>
<param name="name">The name of the hostedControl element in app.config.</param>
<param name="taskId">The task identifier (a GUID associated with the task).</param>
<param name="args">Arguments to the view.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.UIPManager.InvokeEventHandlers(Microsoft.ApplicationBlocks.UIProcess.State)">
<summary>
Called by all classes that wish to alert all listeners for NavigateEvent that navigation has occurred.
</summary>
<param name="state">The current state.</param>
</member>
<member name="E:Microsoft.ApplicationBlocks.UIProcess.UIPManager.NavigateEvent">
<summary>
Occurs when navigation occurs.
</summary>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.UIPManager.NavigateEventHandler">
<summary>
Delegates for the NavigateEvent.
</summary>
<param name="sender">The source of the event.</param>
<param name="e">A NavigateEventArgs object that contains the event data.</param>
</member>
<member name="T:Microsoft.ApplicationBlocks.UIProcess.WizardController">
<summary>
The controller used by all wizards.
<param>This is used internally to control the wizard between transitions.</param>
<param>Views within the wizard still have their own controllers.</param>
</summary>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.WizardController.#ctor(Microsoft.ApplicationBlocks.UIProcess.Navigator)">
<summary>
Initializes a new instance of WizardController with the given navigator.
</summary>
<param name="navigator">Navigator to associate with this controller.</param>
</member>
<member name="M:Microsoft.ApplicationBlocks.UIProcess.WizardController.Next">
<summary>
Invoked when the Next button on a wizard is pressed.
Determines which view to display next.
</summary>
</member>
</members>
</doc>
Submit an article or tip