|
You need a flag. It is only set when you change something about the log save location. Open the dialog when that flag is set. You never save the state of the flag and so it will not be set on form open and the dialog won't open. If you change the Saved Log location then set the flag and open the dialog.
Jack of all trades, master of none, though often times better than master of one.
|
|
|
|
|
Ron Nicholson wrote: You need a flag
Every time I see that I think of this[^].
|
|
|
|
|
I am afraid that I do not understand what you mean. Could you elaborate and/or perhaps give an example?
|
|
|
|
|
I've looked at your code again and I have a question.
if (Save_logs_checkbox.Checked && path_selected == false)
{
Save_logs_combobox.Enabled = true;
Apparently when this function is called, your path_selected is actually set to false. Is that true? If so then maybe you set path_selected to true before you set Save_logs_checkbox.checked to true.
All that said, I'd change the if statement to:
if ((Save_logs_checkbox.Checked) && (path_selected == false))
I just added the parentheses to make sure that it is being evaluated in the way you want it to be. Might be ok, but I like to sprinkle them around. 
Jack of all trades, master of none, though often times better than master of one.
|
|
|
|
|
I would not ask for, and validate, a “log file folder name” (which should be displayed on the Settings form) until I did the “Save” for the settings. At that time, ask for a folder name if the corresponding checkbox is checked and the folder name is missing or invalid.
You could have a “Browse…” button (to get to the file dialog) that is enabled / disabled based on the “logging” checkbox.
(This is the usual “pattern” for an optional file / folder name … IMO).
|
|
|
|
|
I'm doing a project on securing biometrics. Where can I get a biometric application (that includes sample templates and also enrolments can be done)? I will then integrate the app in my C# project where I will be able to encrypt the templates.
|
|
|
|
|
|
Hi!
I wonder if this code is a correct way of using the IDisposable using keyword. Can I put the try-catch block inside it like this, and is it fine to insert a return inside the usage block? (the code is part of a method)
using(StreamReader reader = File.OpenText(fileName))
{
int lineIndex=0;
string line;
while((line=reader.ReadLine()) != null)
{
string[] fields = line.Split(';');
try
{
prodLst.Add(new Produkt(Int64.Parse(fields[0]), (ProdKategoriEnum)Int32.Parse(fields[1]), fields[2], Int32.Parse(fields[3]), Int32.Parse(fields[4])));
prodFileIndexDic.Add(Int64.Parse(fields[0]), lineIndex);
lineIndex++;
}
catch(FormatException e)
{
return false;
}
}
return true;
}
|
|
|
|
|
Entering a try..catch block is not free, in terms of overload. You may enclose your whole while loop in the try..catch block instead (you'll pay the overload only once).
And there's nothing wrong in returning a value inside the block; your StreamReader will be disposed anyway.
If you think it can be a problem, though, you just have to declare a boolean value before using statement, use it in place of your return statements in the using block, and return it at the end.
There are two kinds of people in the world: those who can extrapolate from incomplete data.
|
|
|
|
|
Yes, that's fine - just like a try...catch...finally block will always execute the code in the finally section, it doesn't matter how you exit the using block, the Dispose will still be called.
Personally, I'd probably put the try...catch around the whole loop just to look tidier, and put the return true outside the using so it's more obvious, but it doesn't make any real difference in practice.
Bad command or file name. Bad, bad command! Sit! Stay! Staaaay...
|
|
|
|
|
Not as an answer to your question, phil.o and OriginalGriff already covered that - but since you're apparently interested to learn about good practice:
When simply returning false in case of an exception, you'll never know why exactly your code failed. You should either log the exception message (and possibly its stacktrace) to a logfile or reconsider if it's not even better to just let your exception "bubble up" - meaning, your method would simply be a void method: Continuation of program execution means all went well, otherwise the exception will also abort the execution of the calling code scope. This is in most cases the best approach and saves you from checking boolean success-return values "everywhere". Only catch an exception if you're going to do something with it: Logging and rethrowing it (potentially wrapped as an InnerException into a custom exception) or actually doing something to remedy the error so that the program can continue normally.
Recursion: see Recursion.
|
|
|
|
|
As an implementation note one should keep in mind that dispose (which happens with using) doesn't insure that exceptions cannot be thrown.
Which is fine if you don't mind if an exception occurs on that last closing brace but if you are trying to create a fail safe method then it is inappropriate.
One should also consider what the impact is to the business functionality. So for example in the given sample code if one successfully read the file but then the close fails (in the dispose) then does the application (business functionality) really care?
|
|
|
|
|
Ok guys, thanks for your help.
|
|
|
|
|
Message Closed
modified 24-Mar-15 18:15pm.
|
|
|
|
|
You should never catch the general "Exception" type, except in the entry point to your application where you simply log the exception and exit.
In the OP's code, the try..catch block isn't needed, since there are TryParse methods which won't throw an exception if the input is invalid.
"These people looked deep within my soul and assigned me a number based on the order in which I joined."
- Homer
|
|
|
|
|
Message Closed
modified 24-Mar-15 18:15pm.
|
|
|
|
|
Gerry Schmitz wrote: You have no idea what he has "higher up".
Doesn't matter - swallowing every exception "just-in-case" is still a bad idea.
Gerry Schmitz wrote: You also can't seem to tell the difference between "Parse" and "TryParse".
What?! I suggest you try reading my comments again.
Gerry Schmitz wrote: You should "never" shoot your mouth off before thinking.
Talking to yourself is the first sign of madness.
"These people looked deep within my soul and assigned me a number based on the order in which I joined."
- Homer
|
|
|
|
|
Message Closed
modified 24-Mar-15 18:15pm.
|
|
|
|
|
Which will throw an exception when the input cannot be parsed.
Which is why I suggested using TryParse, which doesn't throw an exception.
Which would then mean that he wouldn't need a try..catch block to catch the exception from the Parse method.
"These people looked deep within my soul and assigned me a number based on the order in which I joined."
- Homer
|
|
|
|
|
Message Removed
modified 24-Mar-15 18:15pm.
|
|
|
|
|
As others have said, the code you've posted will work as expected.
However, you can avoid the try..catch block by using the TryParse methods. You should also check the result of line.Split(';') to avoid an IndexOutOfRangeException, check that the second field is a valid Enum value, and check that the dictionary doesn't already contain the key:
string[] fields = line.Split(';');
if (fields.Length < 5) return false;
long f0;
int f1, f3, f4;
if (!long.TryParse(fields[0], out f0)) return false;
if (!int.TryParse(fields[1], out f1)) return false;
if (!int.TryParse(fields[3], out f3)) return false;
if (!int.TryParse(fields[4], out f4)) return false;
if (prodFileIndexDic.ContainsKey(f0)) return false;
if (!Enum.IsDefined(typeof(ProdKategoriEnum), f1)) return false;
prodList.Add(new Produkt(f0, (ProdKategoriEnum)f1, fields[2], f3, f4));
prodFileIndexDic.Add(f0, lineIndex);
lineIndex++;
"These people looked deep within my soul and assigned me a number based on the order in which I joined."
- Homer
|
|
|
|
|
I have an application in C# which uses a SQLite database. In this database I have a table where I inserted a value encrypted with sha1, via sql query. Te problem is that I want to select that data and use it like:
cmd.CommandText = "Select * from accounts where (username=@username and password=sha1(@password));";
cmd.Parameters.AddWithValue("@password", password);
OR
cmd.CommandText = "Select * from accounts where (username=@username and password=@password);";
cmd.Parameters.AddWithValue("@password", sha1(password));
But from what I heard, I can't use sha1 like this, I have to use a function like this one, but it doesn't work:
string sha1(string password) {
byte[] byteArray = Encoding.UTF8.GetBytes(password);
return Convert.ToBase64String(sha1.ComputeHash(byteArray);
}
I receive error:
sha1(string) is a method, which is not valid in the given context
The other thing, I heard about KDF ( key definition function) which it seems to be a better encryption type but I don't really know how to use it. Can anybody help me with that?
modified 22-Mar-15 12:11pm.
|
|
|
|
|
|
Note he wrote "encryption" but meant "hashing" (sha1). I can't help him with that regarding SQLite but maybe you can add something to your answer.
Recursion: see Recursion.
|
|
|
|
|
It's ok, I want to use KDF instead, but I don't get anything of that code..I solve it with sha1..
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
