Click here to Skip to main content
15,867,488 members
Articles / Desktop Programming / Windows Forms

Shape Control for .NET

Rate me:
Please Sign up or sign in to vote.
4.84/5 (170 votes)
23 Mar 2017CPOL10 min read 377.8K   21.6K   301   92
Implementing shape control that supports transparency, custom design-time editors and simple animation

Image 1

Image 2

Image 3

Image 4

Image 5

Image 6

Image 7

Image 8

 

 

Introduction

When Microsoft upgraded Visual Studio 6 to Visual Studio 7 (.NET), many of the familiar graphical controls (Image control, Shape control) were dropped. Although similar functionalities previously achieved by these controls can be attained using appropriate classes in the .NET library, much more effort is required.

After getting familiar with graphical programming in .NET, I am able to port most of my VB6 graphical programs to C#. However, I find that time and again, I need to implement replacement functionalities for the VB6 Shape control in .NET. There are probably already many Shape controls for .NET by third parties, but I could not find one to my satisfaction.

In this article, I would like to share with the readers how I attempted to implement the Shape control for .NET.

Background

In VB6, the Shape control is a graphical light-weight control, it is not a real control and does not have a Hwnd property. In .NET, all controls are real controls with Hwnd property. Although there is no equivalent Shape control in Visual Studio .NET, there are various classes in the .NET library that can collectively be used to implement the Shape control.

Basically the Shape control is an image with a certain shape. To handle the image functionalities, there are the Image and Bitmap classes. For shapes, there is the GraphicsPath class.

These classes are the key components for implementing the Shape control.

Transparency

In VB6, we can set the DrawMode property to achieve the effect of seeing through the VB6 Shape control. The DrawMode property could still be implemented using GDI/GDI+ functions in .NET, but there is an easier and more elegant way. .NET supports 32 bit ARGB rendering. In VB6, although 32 bit ARGB values can be assigned to colors, the A (Alpha) component of the value is never used.

For any standard control derived from System.Windows.Form.Control, there are at least two properties that take Color values: BackColor and ForeColor. Each of these properties can be assigned ARGB values.

How would you test for transparency? The answer is a background. All controls must reside within a container. For most cases, the form is the container. However, there are also controls that serve as containers, for example the Panel control. To test for transparency, we can set the container's background to an image and the backcolor of the control within the container to a color where the Alpha is less than 255 (maybe 100). You will then be able to see the background image through the control. The lower the Alpha, the more of the background is seen.

Shape

In VB6, we can also create custom controls with different shapes. However, this can only be done by calling Win32 API functions. In .NET, every control has a Region property which can be used to specify its shape. When the control is rendered, Windows will only paint on pixels within the region. A Region can be created by specifying its outline. The outline can be constructed using a GraphicsPath object. The code below creates a GraphicsPath object, adds an ellipse shape to the path and then uses the path to instantiate a new Region object to be assigned to a control's Region property. The end result is that the control will take the shape of the Region, which in this case is an ellipse.

C#
GraphicsPath _outline=new GraphicsPath();
_outline.AddEllipse(0,0,100,100);
this.Region=new Region(_outline);

Custom Design-time Editors

When you use Visual Studio .NET IDE to assign Color properties, you can do so using the standard Color Editor where you can select from a series of colors, or you can directly type in the ARGB values. When you use the standard Color Editor, you cannot specify the Alpha values. And when you directly type in the ARGB values, you do not know how the color will appear. Either way, you do not have an ideal way to enter Color values.

However, Visual Studio .NET allows you to create your own editor to edit property values. For the Shape control, I have created two custom design-time editors. One for editing ARGB values and the other to pick the shape for the Shape control.

In this article, I would not be discussing on how to create a custom design-time editor. You can get more information from the .NET documentation for System.Drawing.Design namespace.

Sample screenshotSample screenshot

 

 

Extending Shape Control

The source code for the Shape control (ShapeControl.cs) allows for easy addition/deletion of shapes. All shapes are enumerated in the ShapeType enum block. You can edit this block to add/delete shapes.

VB.NET
public enum ShapeType{
                Rectangle,
                RoundedRectangle,
                Diamond,
                Ellipse,
                TriangleUp,
                TriangleDown,
                TriangleLeft,
                TriangleRight,
                BallonNE,
                BallonNW,
                BallonSW,
                BallonSE,
                CustomPolygon,
                CustomPie
            }

Correspondingly add/edit the block that creates the outline path for the shape.

C#
internal static void updateOutline(ref GraphicsPath outline, 
                     ShapeType shape, int width,int height)
{
    Switch (Shape)
    {
        Case ShapeType.CustomPie:
            outline.AddPie(0,0,width,height,180,270);
            break;
        Case ShapeType.CustomPolygon:
            outline.AddPolygon(new Point[]{
                          new Point(0,0),
                          new Point(width/2,height/4),
                          new Point(width,0),
                          new Point((width*3)/4,height/2),
                          new Point(width,height),
                          new Point(width/2,(height*3)/4),
                          new Point(0,height),
                          new Point(width/4,height/2)
                                          }
                );
            break;
        Case ShapeType.Diamond:
            outline.AddPolygon(new Point[]{
                        new Point(0,height/2),
                        new Point(width/2,0),
                        new Point(width,height/2),
                        new Point(width/2,height)
                                          });
            break;

        Case ShapeType.Rectangle:
            outline.AddRectangle(new Rectangle(0,0,width,height));
            break;
        .....

The shape selection design-time editor is coded in such a way that it queries the ShapeType enum and calls the updateOutline function while rendering the design-time UI. It will automatically display the shapes correctly.

ShapeImage, ShapeImageRotation and ShapeImageTexture Property

Image 11

I have added ShapeImage property that allows you to specify an image that you would like to use for generating the outline for the Shape control. A suitable image would be one with clear outline, like those included in the project's resources. The above picture shows the setting of the ShapeImage property of a Shape control to take the shape of a butterfly. Note that the ShapeImage property will override the Shape property. If you want to use the Shape property, first set ShapeImage property to (none).

The outline extraction implementation for the ShapeImage property is based on my article.

Fun with Outlines http://www.codeproject.com/Articles/760660/Fun-with-Outlines

The ShapeImageRotation property allows the image to be rotated before the outline is generated. Valid value for this property is between -180 and 180 degree.

The ShapeImageTexture property allows a texture image to be applied to the shape. Note that a texture image is different from simply a background image. The texture is like a skin on the shape and when the shape is resized, rotated and stretched, the texture will also be resized, rotated and stretched. 

Blink, Vibrate, AnimateBorder Property

Setting these properties cause the control to blink, vibrate and animate the border respectively. This may be useful if you want to use the shape control as some kind of beacon.

Connecter Property

I have added Connecter property that is used to specify how a Line shape would connect to the Shape control. The values for the Connecter property are Center, Left, Right, Top, Bottom.

Image 12

The code below shows how to connect a line shape control to 2 shape controls. ctrl1 is the line shape control. The line would extends from source shape control (ctrlsrc) to the destination shape control (ctrldest). ShapeControl.Line.setConnectors() sets the appropriate ConnecterType for the Connector property for the source and destination shape controls. ShapeControl.Line.setConnectorPoint() extracts the coordinates for the anchor points for the source and destination from ctrlsrc and ctrldest respectively. ShapeControl.Line.setLine() set the anchor coordinates for the line shape control.

C#
//default src_cam location
ctrlsrc.Connector =ShapeControl.ConnecterType.Center;
int x0 = ctrlsrc.Location.X +ctrlsrc.Width / 2;
int y0 = ctrlsrc.Location.Y +ctrlsrc.Height / 2;
 
//default dest_cam location
ctrldest.Connector = ShapeControl.ConnecterType.Center;
int x1 = ctrldest.Location.X + ctrldest.Width / 2;
int y1 = ctrldest.Location.Y + ctrldest.Height / 2;
            
//re-adjust connection points
ShapeControl.Line.setConnectors(ref ctrlsrc, ref ctrldest);
ShapeControl.Line.setConnectorPoint(ref x0, ref y0, ctrlsrc);
ShapeControl.Line.setConnectorPoint(ref x1, ref y1, ctrldest);

//call the generic function
ShapeControl.Line.setLine(ref ctrl1, x0, y0, x1, y1);

 

ShapeStorage properties

ShapeStorage

Save AS

I have added 2 properties to the shape control: ShapeStorageSave and ShapeStorageLoad. The main purpose of these properties is to enable you to save shapes to disk and to load them at design time. When you click on these properties in the properties list, a dialog box will pop up to enable you to view and select the file you want to use. The default extension for the shape files is .shp.jpg. For each .shp.jpg file there would be a corresponding .shp file. The .shp file store all the properties and resources used by the shape control. Note that in the Visual Studio Designer these ShapeStorage properties will always be blank, as their sole purpose is to bring up dialog boxes for you to work on. 

Demo Sample Applications

  • Demo1 shows the features of the shape control. The left panel demonstrates transparency as you drag the diamond shape around the panel. The other shape controls show the various different shapes and settings.
  • Demo2 shows the use of the Blink, Vibrate and AnimateBorder property of the shape control in a typical floor plan to flag alarm/alert.
  • Demo3 is a more advanced demo, showing a camera placement designer application. You can add cameras, move them around, resize them, change their properties and connect them up via drag and drop. Direction of connection can also be set and changed. You can also test the animation for the cameras and connecting lines. The configurations can be saved and reload.
  • Demo4 shows a simple cognitive game, where parts of underlaying images of well known personalities are shown within 2 moving clock hands, and the objective is to identify as many of these personalities as possible. The UI demonstrates a creative use of the shape control.
  • Demo5 shows an interesting use of the ShapeImageRotation property. You can trace out the flight path of a areoplane shape control. The aeroplane shape control would move along the flight path with the correct orientation by rotating to head in the direction of flight. 
  • Demo6 illustrates the use of the ShapeImageTexture property. You can see different effects after applying no texture/background, generic texture and specified texture to 2 different shapes.
  • Demo7 shows the saving and loading of shape controls from file at run time
  • Demo8 shows the use of the ShapeStorageSave and ShapeStorageLoad properties.

Double Buffering

Double buffering enables smooth rendering of controls on a form or container. Since .NET 2.0, the Control.DoubleBuffered property has been introduced. However, this property is protected. To enable this property in a control, you could create a custom class inheriting from the Control class, and then set the property in your custom class. However, you can still set this property on existing controls using reflection, without subclassing. The code below shows how to set double buffering for a panel control.

C#
//invoke double buffer 
typeof(Panel ).InvokeMember(
"DoubleBuffered",
System.Reflection.BindingFlags.NonPublic | 
System.Reflection.BindingFlags.Instance | 
System.Reflection.BindingFlags.SetProperty,
null,
panel1,
new object[] { true });

Conclusion

I hope that readers would benefit not only from using the shape control to create fanciful UI, but also from their exploration of the various .NET classes used to create the magic of the shape control.

History

  • 20th April 2014: Updated Shape Type (Property) Editor to work correctly in Visual Studio 2008 and later
  • 29th April 2014: Add in ShapeImage property
  • 7th May 2016: Add in Blink and Vibrate property
  • 9th May 2016: Advance demo showing a camera placement designer application
  • 10th May 2016: Add in double buffering in the demo for smooth dragging of the control
  • 10th May 2016: Add in VB.NET code converted by SharpDevelop (open source IDE)
  • 14th May 2016: Add 4 Lines shapes
  • 16thMay 2016: Add in AnimateBorder property
  • 17th May 2016: Enhance Demo3 (Cam Placement Application) to allow cams to be connected up with the Line shape controls via "Drag and Drop" technique
  • 20th May 2016: Add in Direction property for Line shapes
  • 24th May 2016: Add in Connecter property
  • 22nd Feb 2017: Add in ShapeImageRotation property in V4b
  • 22th Feb 2017: Change the rendering of rotated shape image to get smoother edges in V4b1
  • 25th Feb 2017: Add in Demo5 (Tracing the flight path of a butterfly shape control)
  • 27th Feb 2017: Enhance outline generation for ShapeImage shapes. Fine tuned Demo5. Add in Demo6 to show use of ShapeImageTexture property in V5
  • 1st March 2017: Corrected ColorEditor for VB V4a
  • 9th March 2017: Add in ShapeStorageSave and ShapeStorageLoad properties in V6
  • 24th March 2017: Add in VB.NET source for V6

License

This article, along with any associated source code and files, is licensed under The Code Project Open License (CPOL)


Written By
Software Developer (Senior)
Singapore Singapore
Coder. Hacker. Fixer.

Comments and Discussions

 
Generalgreat article Pin
Southmountain7-May-16 9:03
Southmountain7-May-16 9:03 
GeneralRe: great article Pin
Graham Irons9-May-16 21:10
Graham Irons9-May-16 21:10 
GeneralRe: great article Pin
Yang Kok Wah9-May-16 22:56
Yang Kok Wah9-May-16 22:56 
Generalgreat article. thank You! Pin
tigerwood200623-Oct-14 15:10
tigerwood200623-Oct-14 15:10 
Thumbs Up | :thumbsup:
GeneralMy vote of 5 Pin
Volynsky Alex20-Apr-14 21:32
professionalVolynsky Alex20-Apr-14 21:32 
QuestionThanks for this nice control Pin
matz7618-Feb-14 17:06
matz7618-Feb-14 17:06 
QuestionHow to show shapes above other controls when they are overlapped Pin
Alvin Kwek18-Apr-12 5:35
Alvin Kwek18-Apr-12 5:35 
AnswerRe: How to show shapes above other controls when they are overlapped Pin
Yang Kok Wah20-Apr-12 0:23
Yang Kok Wah20-Apr-12 0:23 
QuestionAbout License ? Pin
jayyang27-Dec-10 17:20
jayyang27-Dec-10 17:20 
AnswerRe: About License ? Pin
Yang Kok Wah28-Dec-10 15:28
Yang Kok Wah28-Dec-10 15:28 
QuestionShape Control integration in a GPL project? Pin
seeseekey8-Dec-10 3:42
seeseekey8-Dec-10 3:42 
GeneralMemory [modified] Pin
tcholzer24-Sep-09 7:24
tcholzer24-Sep-09 7:24 
GeneralCorrection in my previous post Pin
yogeshcprajapati@hotmail.com Yogesh18-Aug-09 7:05
yogeshcprajapati@hotmail.com Yogesh18-Aug-09 7:05 
GeneralBadge Designer Pin
yogeshcprajapati@hotmail.com Yogesh18-Aug-09 6:59
yogeshcprajapati@hotmail.com Yogesh18-Aug-09 6:59 
GeneralRe: Badge Designer Pin
Yang Kok Wah18-Aug-09 17:34
Yang Kok Wah18-Aug-09 17:34 
GeneralHi Dear Pin
mdrizwan_119-Jul-09 19:10
mdrizwan_119-Jul-09 19:10 
GeneralRe: Hi Dear Pin
sonu kumar29-Apr-14 3:05
sonu kumar29-Apr-14 3:05 
GeneralKeyDown event with this example. PLZ HELP, YANG!!! Pin
yogeshcprajapati@hotmail.com Yogesh15-May-09 0:57
yogeshcprajapati@hotmail.com Yogesh15-May-09 0:57 
GeneralRe: KeyDown event with this example. PLZ HELP, YANG!!! Pin
Yang Kok Wah26-May-09 3:49
Yang Kok Wah26-May-09 3:49 
GeneralRe: KeyDown event with this example. PLZ HELP, YANG!!! Pin
yogeshcprajapati@hotmail.com Yogesh28-May-09 4:57
yogeshcprajapati@hotmail.com Yogesh28-May-09 4:57 
GeneralKeyDown event with this example. Pin
yogeshcprajapati@hotmail.com Yogesh14-May-09 6:46
yogeshcprajapati@hotmail.com Yogesh14-May-09 6:46 
GeneralMy modification for the border Pin
gaksoftware9-Jun-08 15:22
gaksoftware9-Jun-08 15:22 
QuestionAdded new shapes can not be accessable Pin
muharrem1-Apr-08 3:00
muharrem1-Apr-08 3:00 
AnswerRe: Added new shapes can not be accessable Pin
Yang Kok Wah26-May-09 3:54
Yang Kok Wah26-May-09 3:54 
QuestionSimply Line shape Pin
carlornd14-Mar-06 21:00
carlornd14-Mar-06 21:00 

General General    News News    Suggestion Suggestion    Question Question    Bug Bug    Answer Answer    Joke Joke    Praise Praise    Rant Rant    Admin Admin   

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.