At some point in the last month, I needed to create an .ICO file on the fly with a couple of images inside; preferably I was looking at code in C#. The .NET Framework 2.0 only supports HICON that basically is one Icon with just a single image in it. When I was searching out there, to my frustration, I did not find any Icon Editor with the source code. The only thing I found was closed commercial products charging from $19 to $39 for them and not exposing APIs at all. So the only solution was to create my own library capable of creating and parsing ICO files.
I believe in open-source code and I thought that I could help the developer community by sharing this knowledge. In addition, open-source pushes companies and commercial products to go farther.
After the work was done, I read about ICL files (Icon Libraries). These can contain many Icons inside a file and I decided to support that too. The same happened with EXE/DLLs and last but not the least I decided to support Windows Vista Icons. All this was really hard work and a lot of headache because there is not much information exposed. I ended up spending a lot of time reverse-engineering and researching over the net. I hope it will be useful for you as it is for me.
As in every new project, many things can happen. Not every case can be tested and many things cannot be seen even after they are tested. Since it is a very fresh project, if there is something that doesn't work, or you think should work differently than it does, before you give your vote, write a post and give me the chance to fix it. That way, we both get the benefit of getting more stable code and creating a more complete library, and at the same time you get my thanks if that helps.
I have also included two libraries as samples. I borrowed some icons from Windows Vista, for the 256x256 versions and I put a watermark because the icons has copyright ownership. Hopefully I won't have trouble with that.
The objective of the library is to create an abstraction layer from the different file formats and to provide an interface to allow icon modification without the hassle of knowing internal file formats.
Current Formats Supported
- ICO Read and write icons with different images size and depths
- ICL Read and write icons inside the icon library
- DLL Read DLLs and export to a new DLL
- EXE Import
- OCX Import
- CPL Import
- SRC Import
Iconlib exposes three different objects.
MultiIcon: This is the only object that can be instantiated in the library. Once a
MultiIcon object is created, it allows APIs to load and save in the file system or streams with standard formats as ICO/ICL/DLL.
SingleIcon: This represents a single icon inside
MultiIcon and it allows add/remove images in it.
IconImage: This represents a single image inside
SingleIcon. At this point,
IconImage exposes the icon's lowest resources like the
XOR (Image) and the
AND Image (Mask). It also exposes an Icon property that will basically construct a .NET Icon created from the
AND image from where you can get a
As you can see there is a hierarchical structure, basically a
Icons and an
Library Objects Diagram
The library contains many classes and structs but only exposes the three important classes. The developer needs to control the complete behavior of the library, the rest are all internal, many classes/structs and methods are not safe to be exposed to the developer. For that reason, I recommend keeping
IconLib as a separated project because if the developer incorporates the source in his/her project, all the internal classes/structs/methods will become visible and probably will not be used properly.
I cannot give support for the library when it is not used the way it was designed. I'm providing the source code as a nice gesture because I believe in open-source code, and I hope you will make good use of it without ripping of the source from where it belongs.
Before I started
IconLib, I had no clue how icons work. However, I was not too long in the net before I found the excellent article Icons in Win32
Although this article is outdated with the arrival of Windows Vista icons, it is very precise in explaining how Icons format files are.
Something to take care; in my first version, I followed the icon format details but the library could not load some of the icons I was testing. When I went deep into the bytes, I could notice that much of the information was missing from the directory entry.
I tested those Icons with another product and I could see that, for example one popular product had no problem opening this kind of icon, and that is because every icon directory entry points to a
ICONIMAGE struct, this
ICONIMAGE struct has a
BITMAPINFOHEADER struct that contains more information than the icon directory entry itself. So basically, using the information from the
BITMAPINFOHEADER, I could reconstruct the information in the directory entry.
The same rule cannot be applied to Windows Vista Icons, because those images don't contain a
BITMAPINFOHEADER struct anymore. Hence, if some information is missing from the directory entry, the icon image becomes invalid.
Anyway, reconstructing the icon directory entry is a plus and discarding icon image not properly constructed is acceptable, no company should provide icons with missing information in the headers.
NE Format (ICL)
NE Format is the popular format to store icon libraries; this format was originally used for Executables on 16-bit version of Windows.
You can get more information for NE format from the Microsoft web site at Executable-File Header Format
This was the most challenging part of the project. When I started researching about ICL, I had no clue that these were 16-bit DLLs. I couldn't find any data about this extension and couple of days later, I almost dropped the project. But I read in some place that ICLs are 16-bit with resources inside so my quest started on how to recover resources from a 16-bit DLL. So far my only next objective was trying to load in memory a 16-bit DLL. Of course, at first I tried to load the library with standard Win32API
LoadLibraryEx but this failed with:
193 - ERROR_BAD_EXE_FORMAT (Is not a valid application.)
I'm not an expert in Kernel memory allocation but I guess this is because in Win32, the memory is protected between applications and in 16-bit is not so when trying to allocate memory for 16-bit the OS rejects the operation.
The next step was trying to load the ICL (16-bit DLL) in memory using just 16 bits APIs. If you read the MSDN WIN32 API, the only API left for 16-bit is
When I tried, it loaded the library but immediately Windows started giving strange message boxes, as "Not enough memory to run 16-bit applications" or things like that.
I wrote in Microsoft forums and other forums, but found nothing really helpful on how I could get those resources. At that time, it was very clear that I could not load 16-bit DLL in memory and that I needed to create my own NE parser/"linker".
Microsoft article about NE Format (New Executable) is an excellent source and describes in detail every field in the file.
A NE format file start with an
IMAGE_DOS_HEADER, this header is there to keep compatibility with MS-DOS OS. This header also contains some specific fields to indicate the existence of a new segmented file format.
IMAGE_DOS_HEADER usually contains a valid executable program to run on MS-DOS. This program is called a stub program and usually it just prints the message on the screen 'This program cannot run on MS-DOS'.
After we read the
IMAGE_DOS_HEADER, the first thing to do is to know if this is a valid header. Usually every file contains what is called a magic number. It is called a magic number because the data stored in that field is not relevant to the program, but it contains a signature to describe the type of the file.
You can find Magic Number almost everywhere. The magic number for the IMAGE_DOS_HEADER is
0x5A4D, this represents the chars 'MZ', and it stands by "Mark Zbikowski" who is a Microsoft Architect and started working with Microsoft a few years after its inception. Probably he could never have thought that his signature was going to be used thousands of times in almost every personal computer in the world.
If the magic number is 'MZ' then the only extra field we care about is the
e_lfanew, this header is the offset to the new exe header, NE Header.
We search in the file for this offset, and then at this point we read a new header. This header is
IMAGE_OS2_HEADER and it contains all information about the program to be loaded in memory.
The first thing to do is to load the magic number again, but this time the magic number must be
0x454E and it means 'NE'. If the signatures match, then we can continue analyzing the rest of the headers. At this point the more important field is
ne_rsrctab as this field contains the offset of the resource table. From this offset, we get the number of bytes we have to jump from the beginning of this header to be in position to read the resource table.
If everything went well, we are ready to read the resource table.
The first field of the Resource Table is the align shift, usually you find the explanation as "The alignment shift count for resource data. When the shift count is used as an exponent of 2, the esulting value specifies the factor, in bytes, for computing the location of a resource in the executable file."
In my own words, the working of this field was tricky to understand. It was created for compatibility with MS-DOS, and it will contain the multiply factor necessary to reach the resource.
As you will see, the resource offset is a variable of type
ushort, which means that it can only address 64Kb (65536). Actually almost every file is bigger than that, and here is where the 'alignment shift' field comes to play.
Alignment shift is a
ushort and "usually" it is in the range of 2 to 10. This number is the number of times we have to shift the number 1 to the left. For example:
- Alignments shift of 5 means 1 << 5 which is equal to 32.
- Alignments shift of 10 means 1 << 10 = 1024
Now with the virtual offset address from the resource table we multiply for the result shift value and we get the real offset address in the file.
The resource located at the virtual address 0x2000 and the alignment shift is 5 then we get:
Realoffset = (1 << 5) * 0x2000
Realoffset = 32 * 0x2000
Realoffset = 0x40000
The real offset of this resource is at 262144 (0x40000).
Wow, this is cool right? Because we just use an
ushort and we can locate a resource at any position. Now you will wonder where the trick lies?
The trick is for example if you use a shift alignment of 5 that means the minimum addressable space is 32 bytes (1 << 5), which means if you want to allocate 10 bytes with this method 32 bytes will be allocated and just the first 10 will be used, another 22 bytes will be wasted.
Now you might wonder, ok then let’s take the shift alignment as 0, then e won't waste space because the virtual address will match with the real address. It is not so easy, and that works only if the resource is located in the range of the first 64Kb space.
So to make it clear, this shift alignment is directly proportional to the file size.
The next table tells what the maximum file sizes are that you can get with different shift alignments:
(1 << 0) * (2 ^ 16) = 64KB
(1 << 1) * (2 ^ 16) = 128KB
(1 << 2) * (2 ^ 16) = 256KB
(1 << 3) * (2 ^ 16) = 512KB
(1 << 4) * (2 ^ 16) = 1MB
(1 << 5) * (2 ^ 16) = 2MB
(1 << 6) * (2 ^ 16) = 4MB
(1 << 7) * (2 ^ 16) = 8MB
(1 << 8) * (2 ^ 16) = 16MB
(1 << 9) * (2 ^ 16) = 32MB
(1 << 10) * (2 ^ 16) = 64MB
Calculating this value is not so easy.
IconLib at first uses a shift factor of 9 because I thought that 32MB was more than enough for an
Icon library. But great was my surprise when I extracted Windows Vista DLLs and
IconLib got out of range for some files. I then incremented the shift factor to 10 which enabled me to dump the content of the Windows Vista DLL in an ICL file, but it took 63MB.
A factor of ten allows to us to create an ICL library up to 64MB but every resource will address at minimum 1024 bytes. If you think that's not bad because all resources will be bigger than 1024, it is not so easy. A factor of ten means it can address in multiples of 1024, then if the resource is 1025 then it will allocate 2048 bytes in the file system.
In conclusion, with a factor of 10,
IconLib is wasting an average of (1024 / 2) 512 bytes by resource allocated, but at the same time it lets us create an
Icon Library with 64MB.
My next release will predict the max file size and will adjust the shift factor dynamically; it is not an easy task if you want to predict the number without scanning memory to know the max space to be addressed, especially for PNG images where this value is dynamic too.
Hopefully shift alignment field is clear now and we come back to the resource table.
The next field is an array of
TYPEINFO is a struct that gives us information about the resource; there are many types of resources that can be allocated, but
IconLib is just interested in two types
IconLib reads the
TYPEINFO array, it discards all structs where
rtTypeID is not
RT_GROUP_ICON type gives us information about a icon.
RT_ICON type gives us information about a single image inside the icon
rtResourceCount is the number of resources of this type in the executable.
rtNameInfo is an array of
TNAMEINFO containing the information about every resource of this type. The length of this array is equal to
Here is where we have the information about the resource itself; the
rnOffset is the virtual address where the physical resource is located. To know the real address, see how alignment shift works above.
rnLength is the length of the resource on a virtual address space. This means if for example the resource has a length of 1500 bytes and the alignment shift is 10, then the value on this field will be 2.
The way to calculate the length is:
rnLenght = Ceiling(ralresourcesize / (1 << resource_table.rscAlignShift));
rnFlags tell us if the resource is fixed, preloaded, or shareable
rnID is the ID of the resource.
rnHandle is reserved.
rnUsage is reserved.
Going back to
TYPEINFO, if the
TYPEINFO struct type is
<a name=""OLE_LINK6""></a>RT_GROUP_ICON then we read the array of
TNAMEINFO which gives us information about every icon in the resource.
The offset in every
TNAMEINFO will contain a pointer to a
GRPICONDIR struct, this struct will give information about a single icon, like how many images it contains and one array of
GRPICONDIRENTRY contains information about the image, like width, height, colorcount, etc.
Now if the
TYPEINFO struct type is
RT_ICON then we read the array of
TNAMEINFO which gives us information about every single image inside the resource.
Going back to the Resource Table we have another three fields,
rscEndTypes is a
ushort value that tell us when to stop reading for
TYPEINFO structs. The resource table struct doesn't tell how many TYPEINFO structs it contains, so the only way to know it is with a stopper flag. This flag is
rscEndTypes. If when we read
TYPEINFO the first two bytes are zero, then it means that we reached the end of the
rscResourceNames is an array of bytes with the names of every resource in
TYPEINFO struct. The names (if any) are associated with the resources in this table. Each name is stored as consecutive bytes; the first byte specifies the number of characters in the name.
For example if the array is
This is translated like an array of two strings "
[5, 73, 67, 79, 78, 48, 5, 73, 67, 79, 78, 49]
[73, 67, 79, 78, 48] = "Icon1"
[73, 67, 79, 78, 49] = "Icon2"
If you wonder when you have to stop reading for bytes in the array, there exists another stopper flag
with a value of zero. When the bytes are being read, if a null ('\x0') character is detected, then the process must stop reading the names, and they are ready to be translated as ANSI strings.
At this point we already have all the information and binary data for the
Icons and the images inside the
loads all the
Icon images in memory to obtain a good performance while working with them. In addition, it does not need to lock the file on the file system.
Creating an ICL file is not so complex after all. Because
IconLib creates an ICL from scratch, it doesn't have to care about the other segments in the NE Format, so the process is relatively simple. We write an
IMAGE_DOS_HEADER, write the
MSDOS stub program, write an
IMAGE_OS2_HEADER, where we choose the right alignment factor and we write the resource table at the location specified by the field
When the resource table is written it has to apply the same rules when loading. This means write a partial resource table struct, the two
and inside the
</ode>, write the
The following table shows a NE format that stores 2 Icons, the first icon contains one image, the second icon contains 2 images.
That is something that I would like to mention. As I mentioned before, I redesigned the core 3 times, the first time I followed every known specification on how the Icon file has to be read and written from Icons and DLLs. When I exported icons from DLLs, I kept all information about the icon, as the Icon names, group ID and icon ID. When I saved them on the file system, I saved them in the same way I read them, so basically I could export the icons from a DLL, export it to a ICL file, then load the ICL and export to a DLL, and I would keep the same IDs for the groups and Icons.
So far I tested two popular commercial products and they could open them without problems, but for example I started to have problems when I exported some DLLs or EXEs to ICL files. For example if you open explorer.exe from Windows folder in Visual Studio, the first thing you will notice is that the icons IDs are not consecutive, they start with ID 100, 101, 102, 103, 104 and jump to 107, and continue.
exported explorer.exe to an ICL file, and import it on Visual Studio and there was no problem at all. But to my surprise, when I tried to open it with a popular Icon Editor, the icon library showed images with icons mismatched and mixed between the icons. I spent many days trying to figure why it was happening.
Basically after many tests of different applications, I could notice that those applications write the ICL files and discard the Icons and Group IDs and they expect consecutive IDs.
For ICL files there is a header to be written
TNAMEINFO, this header contains a field which is the ID. This ID can be a
GRPICONDIRENTRY (Icon itself) or an
ICONDIRENTRY ID (single image ID inside the icon). When those applications write ICL files, they do it in a consecutive way, basically they discard the IDs when they imported from the DLL and write groups id as 1, 2, 3, 4, same for the icons id, they do 1,2,3,4. etc.
So basically I noticed that some applications are not prepared to handle ICL files properly for all cases. Another not so popular application passed it and basically it could read ICL files where the IDs were not consecutive, but still when it saved the ICL file it discarded the source ID and put its own.
So I had a big dilemma. Should I keep all the information and write that information as it is coming from the EXE/DLLs in the ICL files; that would make my ICL files properly constructed but incompatible with some applications out there. Or should I discard the original IDs in the importation and create consecutive IDs which means discard part of the original information and put my own (I was not keen on this solution), but small fishes can swim in a pool with big fishes unless they behave like one.
So I didn't have another choice than to redesign my core to produce those results using consecutive IDs. After I redesigned I reduced the source code because now I didn't need to keep all the information that was generated on the fly, but when icons are exported from the DLLs the original Icons IDs are lost. Anyway, a regular developer will rarely use those IDs.
I still wonder if it is a mis-implementation of those products to fully support ICLs, or if there is a rule in the NE Format files that says you can't store a resource with a "random" ID. So far, all my research concludes that you can use any ID for the
inside NE Format.
PE Format (DLL, EXE, OCX, CPL, SRC)
PE Format means Portable Executable; this format was created by Microsoft to supports 32-bit and 64-bit version of Windows in NE Format replacement used for 16-bit version of Windows.
Basically files format like EXE, DLL, OCX, CPL, SCR don't differ too much amongst them. For example, think of an EXE like a DLL with an entry point. When working with resources, all those files are identical. This means if the library supports PE Format then it supports all the above extensions.
Because Win32 API already supports resources handling for PE format, then it was not necessary to support this file format natively, instead IconLib makes use of Win32 APIs to gain access to the icons resources.
The only native functionality was to read the first set of headers from the PE file to detect whether the file to be loaded is a PE format or not.
If we want to access just the resources then the best way to do it is to load the library as a
DATAFILE. This means no code at all will be executed from the library, instead Win32 API will access just the resources data.
hLib = Win32.LoadLibraryEx(fileName, IntPtr.Zero, LoadLibraryFlags.LOAD_LIBRARY_AS_DATAFILE);
core just supports reading and writing from and to a stream.
overloads some functions as
Save and creates a
FileStream from a file in the file system before calling the
Load(stream). Win32 API
can only load libraries from the file system; therefore the stream will be saved in a temporary file before Win32 API
Access to the resources is an easy task when the resources are accessed in the proper order.
The first thing that
does is call
sending as parameter
GROUP_ICONS, which gives us back the ID of every icon. This ID can be a number or a pointer to a string. If the value returned is less than 65535 then it is a number, if the value if bigger than 65535 then it is a pointer to one string.
Once we have all the IDs for the icons, we call the function
Win32.FindResource. For every ID found, this gives us a handle to the resource and then we can proceed to load and lock the resource to access the resources entries. Those entries contain the IDs of every image inside the icon just loaded/locked. Now we repeat the steps that we did before, but instead of using the constant code>GROUP_ICONS we use
RT_ICON. This tells the Win32 API that we want to access the image inside the icons.
Here is the critical step that needs to be done. Under Windows XP or previous OS, after we lock the resource for the icon image we will have a pointer to an
ICONIMAGE. This icon image will contain the
Image, and the
Image (mask), but in Windows Vista instead, it returns a pointer to a
PNG image, basically this is the main reason why current Icon Editors including the more popular ones will crash. They will allocate huge amount of memory or just drop the image because they will be parsing a
PNG image like a
resolves that issue by reading the first bytes of the Image and detecting the signature of the image creating the proper encoder instance before reading and parsing the image.
has to create a
DLL, the best way so far was to use an empty
DLL as a template, and add the resources to it.
Win32 API offers three APIs that will do the job for us.
MSDN tells us that you can call
BeginUpdateResources, and then call
as many times as you want, the file won't be written yet. At last you call
and the changes are committed to the
That methodology worked pretty good for small
DLL files. When
was creating libraries with more than 80 images, everything was OK but the call to
always failed. After a lot of unsuccessful tries, the only thing I could think of was that the API to update resources has an internal buffer. When that buffer is full, calls to
fail to commit the changes into the
The workaround that I found was to commit every time on an average of 70 updates, this worked pretty well but enormously increased the time to update the
DLL. For that reason, unless I can find why Win32 is doing that, I'll try to come up with my own PE Format implementation, and not use the Win32 at all. That will speed up the process a lot.
You can get more information for PE format from Microsoft web site at Microsoft Portable Executable and Common Object File Format Specification
Windows Vista Icons Support
I wanted to create a library to work with icons without having any limitations, so support for Windows Vista was a must.
In Windows XP, they introduced icons with an alpha channel and 48x48 pixels. In Windows Vista, Microsoft introduced icons images with a size of 256x256 pixels. This image inside the icon can take 256Kbytes for the image and another 8Kbytes for the mask in uncompress format. That increases the size of icons library substantially and basically resolves this issue of storing the image in a compressed format.
The compression used was PNG (Portable Network Graphic) because it is free of patents, supports transparency (Alpha Channel) and employs lossless data compression.
The factor is on an average between 3 to 5 times smaller than uncompress bitmaps.
If you think there is not much difference, then load the file imageres.dll from Windows\System32 in Windows Vista (11MB), do a for loop for all images and set the encoder to be BMP instead PNG, then save it to a DLL or a ICL file. You will notice that the DLL is about 45MB and the ICL about 54MB. This is where you can see that PNG really makes the difference.
To store the compress image, they could come up with a way to keep some backward compatibility and this was setting the field
BI_PNG instead of
BI_RGB. This header is already supported from Windows 3.1 and the filed
from Windows 95, but instead they broke compatibility and they store the image alone. (see 'Ohh Microsoft policy about compatibility is changing?' below)
The sample only contains two images but there can be up to 65535.
Although in all my research, I saw only 256x256 images in PNG format, that doesn't mean it could not store all images as PNG. This was only a decision to have compatibility with previous version of Windows.
Personally I think Icons editors should support PNG at any size and bits depth. Icons not only are used by Windows OS, it is the same why Windows icons allow introducing non-standard images like 128x96x24 when Windows will never make use of it.
If you are creating an icon that Windows Vista will make use of, only store PNG compression for 256x256 images.
The more difficult stuff was how to come up with a clean code and APIs capable of understanding different icons formats and icons libraries and also different image compressions without creating a chaos of switch/if/else.
In my journey of creating the library, I redesigned the core from scratch 3 times, and still there is a TODO changes to avoid
objects from knowing about different compression methods. Basically an
should not be responsible for knowing the format of the image to be read/written. Instead it should depend on the different encoders to know this information.
has a reference to an
object (base class), but still
object is responsible for discovering the signature of the image to know if it has to create a
Also there are a couple of changes to manage the memory allocations more efficiently, but that won't change the core design.
Coming back to what I called Smart Class/Structs: Basically an Icon is a hierarchical structure and Icon libraries are the same but contain one more level of information.
The objective of this smart classes/structs was to avoid interchange data between the different objects; instead every class/struct should be capable of reading and writing itself. If a class of struct contains more classes or structs inside, then it should ask the child to read/write that portion of information and so on.
If you open the source code, immediately you will notice that the parameter '
Stream stream' is everywhere. This allows the object that receives this parameter to read/write itself in the stream at the current position.
For example, when a
Icon file has to be created, the
object will open a
FileStream and will call
ImageFormat.Save(stream), sending as a parameter the stream just opened.
ImageFormat object will contain only the logic to write itself and rely on the different classes/struct to write the rest of the information.
Write iconDir header
Loop for each IconImage
Write iconEntry header
Write bitmap info header
Write Color Palette
Write XOR image
Write AND image
This is a simple case, but more complex cases like reading ICL (Icon Libraries) follow the same behavior.
So, following this model writing and reading different formats was really easy. It also produced a super, cleaner code.
I wanted to provide a library easy to understand and flexible enough to adapt to any kind of image format. The ideal case was to create a class with basic functionality but to leave the specific format implementation to other classes.
object keeps all the information about one icon image and it contains information like image properties, palette, icon image, and icon mask.
This class is an abstract class that cannot be instantiated.
BMPEncoder class has the logic to read and write Icon entries when
PNGEncoder class has the logic to read and write Icon entries when image is PNG format.
I followed the information I could get from different sources to create Icons with PNG compression. So far the implementation doesn't have problems and Icons Images in PNG format can be opened with all Icons editors that support Windows Vista.
Icon libraries are a different subject. So far I did not find a single open source or commercial icon editor, including the more popular ones that allow opening or writing icon libraries like ICL or DLL with PNG compression, In some commercial products you will notice that the PNG icons are not loaded and also if you create PNG icons they are uncompressed before getting saved on a DLL or ICL. I think that is because Microsoft still didn't release any information about it and companies are waiting for the final Windows Vista to come out.
I based my work for creating compressed icon libraries (ICL, DLL) on reverse engineering in Windows Vista RC2 and following the same logic that the Microsoft boys used for icon files.
IconLib is capable of loading all icons from Windows Vista DLLs/EXEs and CPL files (PNG format inclusive). It also allows writing ICL/DLL icon libraries with PNG compressions.
The bad news is that only you can load them with
for now. If you try to load an ICL or DLL with PNG images generated with
and try to open it with third party icon editor, you will see that the PNG icons are gone, and also the icons contain images from other icons. So far, all my research concludes that there is a mis-implementation of PNG format for ICL libraries in those products and has nothing to do with
Now if you wonder how I can be sure that
generates ICL or DLL properly?.
Basically if you try to open Windows Vista icons that contains 26x256 PNG icons in any VisualSudio version (Orcas inclusive if you wonder about VS2006 so far), it will show an image with a size about 2573x1293 with XP format. Of course that image doesn't exist and you can't edit it, but that's how Visual Studio sees it.
Now if you load a DLL with 256x256 PNG files, generated with
and save the icon that contains the PNG image to the file system and open the icon image with Visual Studio, you will notice the same behavior as the DLLs from Windows Vista.
Anyway, the entire work is based on suppositions, and I can't be really sure yet as long as any Windows Vista Libraries Icons Editors hit the market or Microsoft releases more information about it.
Color Reduction and Palette Optimization
Usually there are programs that allow creating icons from a bitmap and they produce an Icon with alpha channel (transparency) compatible with Windows XP, those icons lacks of the support of low resolution images, Iconlib allows to add a low resolution image and also incorporate a whole namespace to produce a low resolution image from a high resolution image.
The techniques used by IconLib are:
- Palette Optimization
- Color Reduction
A palette is an array of RGB colors, most of the times the length of the palette is the amount of colors supported, a palette can contains any length but in most of the cases the palettes are 256 or 16 indexes.
An optimized palette is created on base to the bitmap to be processed; it will analyze the input image and will create a new palette with the most used colors from the input image, many ways might be used to create an optimized palette.
Why use a palette on a Bitmap?
Every index in the palette is a RGB color, 3 bytes are necessary to create the color (1 byte for Red, 1 byte for Green, 1 byte for Blue), this allow to create a combination of 16 million colors because each channel can produce a 256 color gradient, then 256R * 256G * 256B = 16777216 color combinations.
If on the bitmap data we store the RGB information then at least we require 3 bytes to store every pixel color.
Instead, indexed bitmaps will store just one index to an array of colors; this means that the bitmap data does not contain color information but an index to an array (palette).
This can save a lot of space but the image quality may suffer considerably because very similar colors on non-indexed image will be converted to the same color (index) on an indexed image.
There are many more data store in a Bitmap but just for example let’s compare the size of 3 bitmaps.
100x100 pixels 24 bpp image
1 pixel = 3 bytes
100x100x3 = 30000 bytes to store the color information.
100x100 pixels 8bpp indexed image
1 pixel = 1 byte
1 palette = 256 indexes of RGB color = 256x3 = 768
100x100x1 + 768 = 10768 bytes to store the color information.
100x100 pixels 4bpp indexed image
1 pixel = 1/2 byte
1 palette = 16 indexes of RGB color = 16x3 = 48
100x100x1/2 + 48 = 5048 bytes to store the color information.
The key to have a low resolution indexed image and still good looking is to choose the right color for the palette, there are different palettes that can be used.
System palette: this is the default Windows palette and it contains 256 colors, it has a variety of colors in a wide spectrum, IconLib make no use of this palette because if for example the icon to be color reduced has many gradients when those gradient are converted to an index pixel version many of them will have the same index and the quality of the image will be greatly degraded.
Exact: If the image contains less than 256 colors, those are mapped directly to the palette.
Web: Is the intersection between Windows and Mac OS palette, it contains 216 colors that are safe to be used on Windows or Mac OS systems.
Adaptive: This palette reduces the colors in the bitmap based on their frequency; for example, if your image contains mostly skin tones, the adaptive color palette will be mostly skin tones.
Perceptual: This palette is weighted toward reducing the colors in the bitmap to those to which we are the most sensitive.
Selective: The Selective palette will choose the colors from the bitmap to the web-safe colors.
Custom: A custom palette might be provided.
IconLib creates an optimized palette using the Adaptive algorithm with an Octtree structure.
The idea behind color reduction is take an 32bits (ARGB) or 24bits (RGB) image where the data of every pixel contains the RGB color information and convert this image to a indexed image, they are called indexed because every pixel data does not contain the RGB color information instead it contains a index to a palette (Array of colors), this palette store n numbers of colors, 32bits and 24bits images can produce 16 million colors and every pixel is stored as 3 bytes (4th byte for alpha channel). Because indexed just store an index to the palette the store needed depends of the image resolution.
Non-Indexed 32 bits (16M colors plus transparency) = 4 bytes per pixel
Non-Indexed 24 bits (16M colors) = 3 bytes per pixel
Indexed 8 bits (256 colors) = 1 byte per pixel
Indexed 4 bits (16 colors) = 1/2 byte per pixel or 2 pixel per byte
Indexed 1 bit (Black&White) = 1/8 byte per pixel or 8 pixel per byte
In IconLib color reduction algorithm works pretty close with the palette optimization algorithm.
Before a pixel can be converted to an indexed pixel a palette must be available to choose the right color index.
Different palettes can be used in the process of color reduction.
See Palette Optimization above.
The algorithm I have use in the color selection was the Euclidian distance, basically it finds the nearest neighbor color in the palette, it maps the current color in the image with a color in the palette finding the shortest distance between the current color and the neighbor color in a 3D space.
Even when an optimized palette is used in the process of color reduction the resulting image may looks not good especially when the input bitmap contains high number of gradient, to improve the looking of image dithering is used.
Dithering is the process of juxtaposing pixels of two colors to create the illusion that a third color is present, basically noise is added in the process, this noise is proportional to the different color gaps between pixels.
There are many algorithm to implement dithering, and the output image vary between them, personally I like Floyd-Steinberg algorithm because the noise generated is spread uniformly creating a nice looking image.
No dithering: no noise is added to the output bitmap.
There are three kinds of dithering:
Noise dither: It is not really acceptable as a production method, but it is very simple to describe and implement. For each value in the image, simply generate a random number 1..256; if it is greater than the image value at that point, plot the point white, otherwise plot it black.
Ordered dither: Ordered dithering adds a noise pattern with specific amplitudes, for every pixel in the image the value of the pattern at the corresponding location is used as a threshold. Different patterns can generate completely different dithering effects.
Error diffusion: diffuses the quantization error to neighboring pixels.
Floyd-Steinberg dither: it is an error diffusion dither algorithm and is which is used in IconLib, it is based on error dispersion. For each point in the image, first find the closest color available. Calculate the difference between the value in the image and the color you have. Now divide up these error values and distribute them over the neighboring pixels which you have not visited yet. When you get to these later pixels, just add the errors distributed from the earlier ones, clip the values to the allowed range if needed, then continue as above.
In the following sample it reduces the image to 8, 4 and 1bpp from a 24bpp source image.
IColorQuantizer colorReduction = new EuclideanQuantizer(new OctreeQuantizer(), new FloydSteinbergDithering());
Bitmap bmp = (Bitmap) Bitmap.FromFile("c:\\Pampero.png");
Bitmap newBmp = colorReduction.Convert(bmp, PixelFormat.Format8bppIndexed);
newBmp.Save("c:\\Pampero 8.png", ImageFormat.Png);
newBmp = colorReduction.Convert(bmp, PixelFormat.Format4bppIndexed);
newBmp.Save("c:\\Pampero 4.png", ImageFormat.Png);
newBmp = colorReduction.Convert(bmp, PixelFormat.Format1bppIndexed);
newBmp.Save("c:\\Pampero 1.png", ImageFormat.Png);
<td style="PADDING-RIGHT: 5.4pt; PADDING-LEFT: 5.4pt; PADDING-BOTTOM: 0in; WIDTH: 162.3pt; PADDING-TOP: 0in" valign=removed" width="216">
1bit Black and White
24bits RGB 16M Colors
8bits 256 colors
4bits 16 colors
Extensible ColorProcessing Namespace
For most of the application that use IconLib the ColorProcessing namespace contains all the tools necessary to create a quality icon, but because there are so many algorithm for color reduction then it is implemented with interfaces, this means that the library can be expanded to use different algorithms if it is necessary.
For color reduction there is an interface
IColorQuantizer and it is implemented for the default class
For palette optimization there is an interface
IPaletteQuantizer and it is implemented for the default class
For dithering there is an interface
IDithering and it is implemented for the default class
Any of those interfaces can be implemented and the default can be replaced.
For example, if the developer implemented the noise or random dither algorithm then the color reduction initialization could be something like:
IColorQuantizer colorReduction = new EuclideanQuantizer(new OctreeQuantizer(), new NoiseDithering());
Automatic Icon Creation
Even when with a few lines of code IconLib can create an icon with multiple images from a single one, anyway IconLib provideds a special API that will create a full Icon from a single input image.
MultiIcon mIcon = new MultiIcon();
SingleIcon sIcon = mIcon.Add("Icon1");
CreateFrom is a method exposed on
SingleIcon class, this method will take a input image that must be 256x256 pixels and it must be a 32bpp (alpha channel must be included), the perfect candidate for this method are PNG24 images created for PhotoShop or any Image editing software.
The second parameter in the API is a flag enumeration that target the OS which we want to create the icon, in the previous example it will take the input image and it will create the following IconImage formats.
256x256x32bpp (PNG compression)
There are 14 possible enumerations defined, but they can be combined to get whatever format the developer is looking for.
This method make use of the whole library to provide the best IconImage for each format.
Ohh Microsoft policy about compatibility is changing?
Something I have to comment about because I think it is a breakthrough on how Microsoft usually does things from my point of view.
I have been developing on Windows platform for the last decade from the Windows 3.1 to date, and something that I saw in Microsoft APIs is the amazing compatibility between versions. Personally I think many Win32 APIs are so intrinsic and complicated because they had to keep backward compatibility, and I had so many headaches in the last years because of it.
For example the huge show stopper for Windows future generation was the GDI that imposed a set of rules that could not be broken in any way, GDI+ helped but still ran under the GDI rules, and that is the reason why there are things that Windows could never do until now.
This happened when I decided to implement Windows Vista icons support.
I read that Windows Vista icons are 256x256 and they use PNG compression for them.
At first I was 100% convinced they were going to keep backward compatibility, so I started to think how they did it. The first thing that came to my mind was that Microsoft boys were going to use the field
biCompression in the header
and instead set to
BI_RGB (BMP). They were going to use
(PNG) that is already supported in the header, the palette was going to be empty and the
AND Image would contain the PNG data.
I was surprised when that didn't happen. Instead they completely dropped the concept of having a
BITMAPINFOHEADER, the image (
XOR) and the mask (
AND). Instead, the icon directory pointed to a 100% PNG structure.
At first I thought, 'oh my God what have they done!'
This was going to break all Icons Editors out there, also Visual Studio and Resource Editors won't be able to open ICO files anymore, but when I sat and thought about it, it occurred to me that it was the right way to go.
Developers have always complained about how complicated some Win32 APIs are, and this time Microsoft heard that and did things right.
If they could have kept compatibility, it would mean that now ICO and ICON libraries could have 3 places with redundant information about each image.
PNGHEADER usually find those bizarre things in Win32 API.
Instead now they have the Icon directory entry that points to the image itself. That way, they open the way for future implementation for different images or compressions. Still ICO files are limited by a maximum of 256x256 pixels because the Icon directory stores width and height in two byte type fields
bHeight. Probably that can be resolved using more than one Plane. But anyway still we are far from use ICONS with more than 256x256 pixels.
So this time I congratulate the boys at Microsoft for thinking "what is the best way to do it" over anything else.
If you wonder if this means VS2005 or any VS won't be able to open properly ICO or DLLs from Windows Vista, then you are right, it WON'T. I also tested ORCAS (VS2006) and it doesn't support it. But that can be easily resolved with a VS patch that hopefully will come out soon, else you will have a product like this library that will support Windows Vista Icons.
IconLib is a powerful library to allow icons or icon libraries creation and modifications. I plan to support updates for DLLs and EXE in the next version, allowing to replace/add/delete icons inside them.
IconLib alone is only useful from a programming language. So, I also plan to create an advance Icon Editor application to make full use of
IconLib. That will probably be my next article in the next few months.
If I can get file formats like .icc (Icons collection), Icns, RSC, bin (mac), I'll support them. If you know of some file format and you have the internal file structure, let me know and I'll try it to implement it.
If someone is interested in creating an open-source Icon Extractor & Editor, then he or she is welcome to use
IconLib as the file formats engine and I can provide support for
IconLib 0.73 (01/31/2008)
- Fixed a small problem with indexed 8bpp images.
- Properly processing when adding PNG24 images.
- Automatic Icon creation from a PNG or BMP32 for Vista, XP, W95 and Win31.
- Added a new namespace "ColorProcessing" which supports
- Color Reduction
- Palette Optimization
- Allow to save an IconImage as PNG or BMP32 with transparency.
- SingleIcon.Add() methods now returns a reference the IconImage just been created.
- Some code and method signatures changes but backward compatible.
- Demo application allows to export XOR, AND and Transparent Image, also now IconImages can be exported as PNG24 or BMP32.
IconLib 0.72 (11/02/2006)
- Change default shift factor from 9 to 10 for ICL libraries. (now it supports 64MB Max ICL file size).
- Re-coded function to make vertical flip over Black&White images using pointers and memcopy (increased performance).
- Different Namespaces for Bitmap Encoders and Library Formats.
- Removed Static classes for Library Formats and replaced for a Interface from which the different formats implement.
IconLib license type.
IconLib 0.71 (Initial Release)
This work is licensed under a Creative Commons Attribution-Share Alike 3.0 Unported License.
Icons in Win32
Wikipedia Icon Image File Format
New-style EXE Format
Executable-File Header Format
Microsoft Portable Executable
Floyd-Steinberg dithering source
Octree Quantizer implementation