Click here to Skip to main content
15,867,686 members
Articles / Desktop Programming / WPF

WPF/MVVM Quick Start Tutorial

Rate me:
Please Sign up or sign in to vote.
4.92/5 (699 votes)
10 Oct 2012CPOL11 min read 1.7M   61K   651   342
A quick example of MVVM in WPF

Introduction

Assuming that you have a decent understanding of C#, getting started in WPF isn't too difficult. I started looking at WPF a while ago, and didn't find many helpful MVVM tutorials. Hopefully this article addresses that.

As with learning any new technology, you get the benefit of hindsight. From my perspective, almost every tutorial on WPF I've come across is inadequate for one of several reasons:

  • The example is all in XAML.
  • The example glosses over the key facts that would actually make your life easier.
  • The example tries to show off WPF/XAML's capabilities with lots of pointless effects that aren't helping you.
  • The example uses classes that have properties that appear far too similar to framework keywords and classes, and are therefore difficult to identify in the (XAML) code as being user defined (the ListBox GroupStyle's Name attribute is a complete headache for novices).

So to address this, I've written this based on what I would have liked to have found as the #1 hit on Google after typing 'WPF Tutorial'. This article may not be 100% correct, or even do things 'the one true way', but it will illustrate the main points that I wish I had found in one place 6 months ago.

I will quickly introduce some topics, then show an example that explains or demonstrates each point. Accordingly, I haven't really attempted to make the GUIs pretty, that's not the point of this article (see the bullet points above).

As this tutorial is quite long, I've elided quite a lot of code for brevity, so please download the attached zip file, and look at the examples (.NET 4.0/VS2010). Each example builds on the previous one.

The Basics

  1. The most important thing about WPF is data binding. In short, you have some data, typically in a collection of some sort, and you want to display it to the user. You can 'bind' your XAML to the data.
  2. WPF has two parts, the XAML which describes your GUI layout and effects, and the code-behind that is tied to the XAML.
  3. The neatest and probably most reusable way to organise your code is to use the 'MVVM' pattern: Model, View, ViewModel. This has the aim of ensuring that your View contains minimal (or no) code, and should be XAML-only.

The Key Points You Need to Know

  1. The collection you should use to hold your data is the ObservableCollection<>. Not a list, not a dictionary, but an ObservableCollection. The word 'Observable' is the clue here: the WPF window needs to be able to 'observe' your data collection. This collection class implements certain interfaces that WPF uses.
  2. Every WPF control (including 'Window's) has a 'DataContext' and Collection controls have an 'ItemsSource' attribute to bind to.
  3. The interface 'INotifyPropertyChanged' will be used extensively to communicate any changes in the data between the GUI and your code.

Example 1: Doing It (mostly) Wrong

The best way to start is an example. We will start with a Song class, rather than the usual Person class. We can arrange songs into Albums, or one large collection, or by Artist. A simple Song class would be as follows:

C#
public class Song
{
    #region Members
    string _artistName;
    string _songTitle;
    #endregion

    #region Properties
    /// The artist name.
    public string ArtistName
    {
        get { return _artistName; }
        set { _artistName = value; }
    }

    /// The song title.
    public string SongTitle
    {
        get { return _songTitle; }
        set { _songTitle = value; }
    }
    #endregion
}

In WPF terminology, this is our 'Model'. The GUI is our 'View'. The magic that data binds them together is our 'ViewModel', which is really just an adapter that turns our Model into something that the WPF framework can use. So just to reiterate, this is our 'Model'.

Since we've created a Song as a reference type, copies are cheap and light on memory. We can create our SongViewModel quite easily. What we need to consider first is, what are we going to (potentially) display? Suppose we just care about the song's artist name, not the song title, then the SongViewModel could be defined as follows:

C#
public class SongViewModel
{
    Song _song;

        public Song Song
        {
            get
            {
                return _song;
            }
            set
            {
                _song = value;
            }
        }

        public string ArtistName
        {
            get { return Song.ArtistName; }
            set { Song.ArtistName = value; }
        }
}

Except that this isn't quite correct. Since we're exposing a property in our ViewModel, we would obviously want a change to the song's artist name made in the code to be automatically shown in the GUI, and vice versa:

C#
SongViewModel song = ...;
// ... enable the databinding ...
//  change the name
song.ArtistName = "Elvis";
//  the gui should change

Notice that in all the examples here, we create our view model *declaratively*, i.e., we do this in the XAML:

XML
<Window x:Class="Example1.MainWindow"
        xmlns:local="clr-namespace:Example1">
    <Window.DataContext>
        <!-- Declaratively create an instance of our SongViewModel -->
        <local:SongViewModel />
    </Window.DataContext>

This is equivalent to doing this in your code-behind MainWindow.cs:

C#
public partial class MainWindow : Window
{
    SongViewModel _viewModel = new SongViewModel();
    public MainWindow()
    {
        InitializeComponent();
        base.DataContext = _viewModel;
    }
}

And removing your DataContext element in the XAML:

XML
<Window x:Class="Example1.MainWindow"
        xmlns:local="clr-namespace:Example1">
    <!--  no data context -->

This is our view:

Image 1

Clicking the button does not update anything, because we have not completely implemented data binding.

Data Binding

Remember I said at the start that I would choose a property that stands out. In this example, we want to display the ArtistName. I chose this name because it is NOT the same as any WPF attribute. There are a countless number of examples on the web that choose a Person class and then a Name attribute (the Name attribute exists on multiple .NET WPF classes). Perhaps the authors of the articles just don't realise that this is particularly confusing for beginners (who are, curiously enough, the target audience of these articles).

There are dozens of other articles about data binding out there, so I won't cover it here. I hope the example is so trivial that you can see what is going on.

To bind to the ArtistName property on our SongViewModel, we simply do this in the MainWindow.xaml:

XML
<Label Content="{Binding ArtistName}" />

The 'Binding' keyword binds the content of the control, in this case a Label, to the property 'ArtistName' of the object returned by DataContext. As you saw above, we set our DataContext to an instance of SongViewModel, therefore we are effectively displaying _songViewModel.ArtistName in the Label.

Once again: clicking the button does not update anything, because we have not completely implemented data binding. The GUI is not receiving any notifications that the property has changed.

Example 2: INotifyPropertyChanged

This is where we have to implement the cunningly named interface: INotifyPropertyChanged. As it says, any class that implements this interface, notifies any listeners when a property has changed. So we need to modify our SongViewModel class a little bit more:

C#
public class SongViewModel : INotifyPropertyChanged
    {
        #region Construction
        /// Constructs the default instance of a SongViewModel
        public SongViewModel()
        {
            _song = new Song { ArtistName = "Unknown", SongTitle = "Unknown" };
        }
        #endregion

        #region Members
        Song _song;
        #endregion

        #region Properties
        public Song Song
        {
            get
            {
                return _song;
            }
            set
            {
                _song = value;
            }
        }

        public string ArtistName
        {
            get { return Song.ArtistName; }
            set
            {
                if (Song.ArtistName != value)
                {
                    Song.ArtistName = value;
                    RaisePropertyChanged("ArtistName");
                }
            }
        }
        #endregion

        #region INotifyPropertyChanged Members

        public event PropertyChangedEventHandler PropertyChanged;

        #endregion

        #region Methods

        private void RaisePropertyChanged(string propertyName)
        {
            // take a copy to prevent thread issues
            PropertyChangedEventHandler handler = PropertyChanged;
            if (handler != null)
            {
                handler(this, new PropertyChangedEventArgs(propertyName));
            }
        }
        #endregion
    }

There are several things now happening here. Firstly, we check to see if we are going to really change the property: this improves performance slightly for more complex objects. Secondly, if the value has changed, we raise the PropertyChanged event to any listeners.

So now we have a Model, and a ViewModel. We just need to define our View. This is just our MainWindow:

XML
<Window x:Class="Example2.MainWindow"
        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
        xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
        xmlns:local="clr-namespace:Example2"
        Title="Example 2"  SizeToContent="WidthAndHeight" ResizeMode="NoResize"
        Height="350" Width="525">
    <Window.DataContext>
        <!-- Declaratively create an instance of our SongViewModel -->
        <local:SongViewModel />
    </Window.DataContext>
    <Grid>
        <Grid.RowDefinitions>
            <RowDefinition Height="Auto" />
            <RowDefinition Height="Auto" />
            <RowDefinition Height="Auto" />
        </Grid.RowDefinitions>
        <Grid.ColumnDefinitions>
            <ColumnDefinition Width="Auto" />
            <ColumnDefinition Width="Auto" />
        </Grid.ColumnDefinitions>
        <Label Grid.Column="0" Grid.Row="0" Content="Example 2 - this works!" />
        <Label Grid.Column="0" Grid.Row="1" Content="Artist:  " />
        <Label Grid.Column="1" Grid.Row="1" Content="{Binding ArtistName}" />
        <Button Grid.Column="1" Grid.Row="2" Name="ButtonUpdateArtist"
        Content="Update Artist Name" Click="ButtonUpdateArtist_Click" />
    </Grid>
</Window>

To test the databinding, we can take the traditional approach and create a button and wire to its OnClick event, so the XAML above has a button, and Click event, giving the code behind:

C#
public partial class MainWindow : Window
{
    #region Members
    SongViewModel _viewModel;
    int _count = 0;
    #endregion

    public MainWindow()
    {
        InitializeComponent();

        //  We have declared the view model instance declaratively in the xaml.
        //  Get the reference to it here, so we can use it in the button click event.
        _viewModel = (SongViewModel)base.DataContext;
    }

    private void ButtonUpdateArtist_Click(object sender, RoutedEventArgs e)
    {
        ++_count;
        _viewModel.ArtistName = string.Format("Elvis ({0})", _count);
    }
}

This is ok, but it is not how we should use WPF: firstly, we have added our 'update artist' logic into our code-behind. It does not belong there. The Window class is concerned with windowing. The second problem is, suppose we want to move logic in the *button* click event to a different control, for example, making it a menu entry. It means we will be cut'n'pasting, and editing in multiple places.

Here is our improved view, where clicking now works:

Image 2

Example 3: Commands

Binding to GUI events is problematic. WPF offers you a better way. This is ICommand. Many controls have a Command attribute. These obey binding in the same way as Content and ItemsSource, except you need to bind it to a *property* that returns an ICommand. For the trivial example that we are looking at here, we just implement a trivial class called 'RelayCommand' that implements ICommand.

ICommand requires the user to define two methods: bool CanExecute, and void Execute. The CanExecute method really just says to the user, can I execute this command? This is useful for controlling the context in which you can perform GUI actions. In our example, we don't care, so we return true, meaning that the framework can always call our 'Execute' method. It could be that you have a situation where you have a command bound to button, and it can only execute if you have selected an item in a list. You would implement that logic in the 'CanExecute' method.

Since we want to reuse the ICommand code, we use the RelayCommand class that contains all the repeatable code we do not want to keep writing.

To show how easy it is to reuse the ICommand, we bind the Update Artist command to both a button and a menu item. Notice that we no longer bind to Button specific Click event, or Menu specific Click event.

Image 3

Example 4: Frameworks

By now, if you have read closely, you'll probably notice that a lot of this is just repetitive code: raising INPC, or creating commands. This is mostly boilerplate, and for INPC, we can move it to base class that we call 'ObservableObject'. For the RelayCommand class, we just move that into our .NET class library. This is how all of the MVVM frameworks you find on the web begin (Prism, Caliburn, etc.).

As far as the ObservableObject and RelayCommand classes are concerned, they are rather basic and are the inevitable result of refactoring. Unsurprisingly, these classes are practically the same as those by Josh Smith.

So we move these classes into a small class library that we can reuse in future.

The view looks much the same as before:

Image 4

Example 5: Collections of Songs, Doing It Wrong

As I said before, in order to display collections of items in your View (i.e. the XAML), you need to use an ObservableCollection<t>. In this example, we create an AlbumViewModel, which nicely collects our songs together in something that people understand. We also introduce a simple song database, purely so we can quickly produce some song information for this example.

Your first attempt might be as follows:

C#
class AlbumViewModel
{
    #region Members
    ObservableCollection<Song> _songs = new ObservableCollection<Song>();
    #endregion
}

You might think: "I have a different view model this time, I want to display the songs as an AlbumViewModel, not a SongViewModel".

We also create some more ICommands and attach them to some buttons:

C#
public ICommand AddAlbumArtist {}

public ICommand UpdateAlbumArtists {}

In this example, clicking 'Add Artist' works fine. But clicking 'Update Artist Names', fails. If you read the yellow highlighted note on this page on MSDN, it explains why:

To fully support transferring data values from binding source objects to binding targets, each object in your collection that supports bindable properties must implement an appropriate property changed notification mechanism such as the INotifyPropertyChanged interface.

Our view looks like this:

Image 5

Example 6: Collections of Songs, the Right Way

In this final example, we fix the AlbumViewModel to have an ObservableCollection of SongViewModels that we created earlier:

C#
class AlbumViewModel
{
    #region Members
    ObservableCollection<SongViewModel> _songs = new ObservableCollection<SongViewModel>();
    #endregion
    //  code elided for brevity
}

Now all our buttons that are bound to commands operate on our collection. Our code-behind in MainWindow.cs is still completely empty.

Our view looks like this:

Image 6

Conclusion

Instantiating Your ViewModel

One last point that is worth mentioning is that when you declare your ViewModel declaratively in the XAML, you cannot pass it any parameters: in other words, your ViewModel must have an implicit, or explicit default constructor. How you add state to your ViewModel is up to you. You may find it easier to declare the ViewModel in the MainWindow.cs code-behind, where you can pass in construction parameters.

Other Frameworks

There are lots of other MVVM Frameworks of wildly different complexity and functionality, targeting WPF, WP7, Silverlight, and any combination of the three.

Finally...

Hopefully these six examples show you how easy it is to write a WPF application using MVVM. I've tried to cover all of the points that I think are important and often discussed in multiple articles.

If you find this article helpful, please feel to vote it up.

If you find faults in this article, or I've said anything wrong, or you have some other issue with it, please leave a comment below explaining why, and how you would fix it.

References

I've tried to abide by various agreed .NET programming guidelines and styles whilst writing this. A list of references I used whilst compiling this article are listed here:

  1. Effective C#
  2. Framework Design Guidelines: Conventions, Idioms, and Patterns for Reusable .NET Libraries
  3. C# 4.0 in a Nutshell: The Definitive Reference
  4. WPF 4 Unleashed
  5. Josh Smith

Further Reading (Gratuitous Links)

Following on from this, I have added two further CP articles on using Laurent Bugnion's MVVM Light Framework which I recommend you start using as you to get to grips with MVVM for the first time. If you understood this article, move on to:

Footnote

(2/2/2012): Thank you to everyone that has voted and/or (positively!) commented below so far (and in the future)!

History

  • 6th March, 2011: Initial post
  • 2nd February, 2012: Further Reading and Footnote
  • 22nd February, 2012: Minor text edits for clarity.

License

This article, along with any associated source code and files, is licensed under The Code Project Open License (CPOL)


Written By
United Kingdom United Kingdom
Jack of all trades.

Comments and Discussions

 
QuestionConfused in code listing 2 (songviewmodel) Pin
Manvendra Singh20-Feb-15 23:29
Manvendra Singh20-Feb-15 23:29 
GeneralMy vote of 5 Pin
sHuaGao7-Feb-15 4:09
sHuaGao7-Feb-15 4:09 
GeneralMy vote of 5 Pin
ftedy20-Dec-14 9:52
ftedy20-Dec-14 9:52 
GeneralMy vote of 5 Pin
Shahid Alee11-Dec-14 13:25
Shahid Alee11-Dec-14 13:25 
GeneralMy vote of 5 Pin
Gaurav Aroraa30-Oct-14 11:12
professionalGaurav Aroraa30-Oct-14 11:12 
QuestionThis is nice. Pin
Shivprasad koirala21-Oct-14 22:37
Shivprasad koirala21-Oct-14 22:37 
QuestionComments Pin
Member 1083864117-Sep-14 23:40
Member 1083864117-Sep-14 23:40 
GeneralMy vote of 5 Pin
Jitendra Sabat6-Sep-14 21:20
Jitendra Sabat6-Sep-14 21:20 
GeneralMy vote of 3 Pin
Darshil H Pandya3-Sep-14 21:21
Darshil H Pandya3-Sep-14 21:21 
GeneralVery helpful, converted to VB Pin
Member 110501992-Sep-14 23:21
Member 110501992-Sep-14 23:21 
GeneralMy vote of 5 Pin
Member 1075086419-Aug-14 23:33
Member 1075086419-Aug-14 23:33 
GeneralMy vote of 5 Pin
Member 1102152919-Aug-14 0:45
Member 1102152919-Aug-14 0:45 
Questionmight be the best wpf example out there! Pin
jjtohiox10-Aug-14 16:34
jjtohiox10-Aug-14 16:34 
GeneralMy vote of 4 Pin
Chris8757-Aug-14 3:39
professionalChris8757-Aug-14 3:39 
QuestionExample 6, SongViewModel? Pin
asarkar994-Aug-14 1:39
asarkar994-Aug-14 1:39 
AnswerRe: Example 6, SongViewModel? Pin
WiiMaxx22-Jul-15 3:01
WiiMaxx22-Jul-15 3:01 
QuestionI don't get this part.. Pin
Member 1095606118-Jul-14 5:20
Member 1095606118-Jul-14 5:20 
AnswerRe: I don't get this part.. Pin
Barry Lapthorn11-Aug-14 23:07
protectorBarry Lapthorn11-Aug-14 23:07 
Question5 Pin
Member 109330759-Jul-14 3:51
Member 109330759-Jul-14 3:51 
GeneralGood article. Pin
Sean Chung5-Jul-14 23:10
Sean Chung5-Jul-14 23:10 
GeneralThank you. This article was very helpful! Pin
Prographer19-Jun-14 3:37
Prographer19-Jun-14 3:37 
Questionthank!! very helpful Pin
Member 1070286312-Jun-14 3:03
Member 1070286312-Jun-14 3:03 
AnswerExcellent!!! Pin
nguyenhs4-Jun-14 17:51
nguyenhs4-Jun-14 17:51 
GeneralExactly what I was looking for! Pin
jonifen3-Jun-14 11:51
jonifen3-Jun-14 11:51 
QuestionCanUpdateArtistNameExecute() Question Pin
mkcaru30-May-14 7:45
mkcaru30-May-14 7:45 

General General    News News    Suggestion Suggestion    Question Question    Bug Bug    Answer Answer    Joke Joke    Praise Praise    Rant Rant    Admin Admin   

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.