14,240,794 members

# FFT Guitar Tuner

Rate this:
10 Aug 2010MIT
Using a Fast Fourier Transform to calculate the fundamental frequency of the captured audio sound

## Introduction

This article shows how to use a Fast Fourier Transform (FFT) algorithm to calculate the fundamental frequency of a captured audio sound. Also, we will see how to apply the algorithm to analyze live sound to build a simple guitar tuner: the code provides a solution to the problem of calculation of the fundamental frequency of the played pitch.

## Background

The computer can capture live sound/music using a microphone that is connected to the sound card. Modern sound cards can capture digital signals. A digital signal is a set of quantized sound values that were taken in uniformly spaced times. The digital signal does not provide any information about frequencies that are present in the sound. To determine that, the data need to be analyzed.

The Short-Time Fourier Transform (STFT) makes representation of the phase and magnitude of the signal. The result of the STFT can be used to produce the spectrogram of the signal: the magnitude squared over time and frequencies. We will use a Fast Fourier Transform (FFT) to generate the spectrogram of the signal of short periods of time. After the spectrogram is calculated, the fundamental frequency can be determined by finding the index of the maximum value of the magnitude squared. The improved algorithm finds several such places, candidate frequency bins, with the magnitude squared in the top of the maximum values, and further analyzes them to verify the candidate fundamental frequencies by using the signal data.

When a note is played on a musical instrument, the sound waves are generated by strings, air, or the speaker - an instrument generates a musical note. One of the characteristics of a musical note is a pitch (fundamental frequency). Traditionally musical alphabet frequencies are divided by octaves, and then by semitones. An octave has 12 named pitches: C (prime), C#, D, D#, E, F, F#, G, G#, A, A#, and B. Octaves also have names: great, small, one-lined, two-lined, etc. The "standard pitch" (A one-lined or A4) has a fundamental frequency of its sound waves equals to 440 Hz. The frequencies of two neighboring notes are different by 21/12, and frequencies of the notes with the same name in two neighboring octaves are different by 2.

Table: Notes and Their Fundamental Frequencies
Note NameTraditional Octave Names (Scientific), Hz
Great (2)Small (3)One-lined (4)Two-lined (5)
C65.4064130.8128261.6256523.2511
C#69.2957138.5913277.1826554.3653
D73.4162146.8324293.6648587.3295
D#77.7817155.5635311.1270622.2540
E82.4069164.8138329.6276659.2551
F87.3071174.6141349.2282698.4565
F#92.4986184.9972369.9944739.9888
G97.9989195.9977391.9954783.9909
G#103.8262207.6523415.3047830.6094
A110.0000220.0000440.0000880.0000
A#116.5409233.0819466.1638932.3275
B123.4708246.9417493.8833987.7666

The typical (six string) guitar normally plays pitches of great through two-lined octaves. The pitches of the open strings (E2, A2, D3, G3, B3, and E4) are selected in the table in bold.

## Using the Code

The solution contains three projects: the main windows application (FftGuitarTuner), the sound analysis library (SoundAnalysis), and the sound capture library (SoundCapture). The heart of the solution and the SoundAnalysis project is the FFT algorithm (see the `Calculate` method of the `SoundAnalysis.FftAlgorithm` class):

```// bit reversal
ComplexNumber[] data = new ComplexNumber[length];
for (int i = 0; i < x.Length; i++)
{
int j = ReverseBits(i, bitsInLength);
data[j] = new ComplexNumber(x[i]);
}

// Cooley-Tukey
for (int i = 0; i < bitsInLength; i++)
{
int m = 1 << i;
int n = m * 2;
double alpha = -(2 * Math.PI / n);

for (int k = 0; k < m; k++)
{
// e^(-2*pi/N*k)
ComplexNumber oddPartMultiplier =
new ComplexNumber(0, alpha * k).PoweredE();

for (int j = k; j < length; j += n)
{
ComplexNumber evenPart = data[j];
ComplexNumber oddPart = oddPartMultiplier * data[j + m];
data[j] = evenPart + oddPart;
data[j + m] = evenPart - oddPart;
}
}
}

// calculate spectrogram
double[] spectrogram = new double[length];
for (int i = 0; i < spectrogram.Length; i++)
{
spectrogram[i] = data[i].AbsPower2();
}```

The data for the algorithm is provided from the sound card capture buffer. The abstract `SoundCapture.SoundCaptureBase` utility class is an adapter for DirectSound's `Capture` and `CaptureBuffer` classes, that helps to encapsulate buffering and setting up the audio format parameters. The application requires Microsoft DirectX 9 runtime components for the live sound capture from the microphone.

Figure: Main Application Form

After the application is started, select the sound device and play a note. The application will capture the live sound and will calculate the current fundamental frequency of the signal. The information can be used to tune the guitar.

## Points of Interest

To calculate the Fast Fourier Transform, the Cooley-Tukey algorithm was used. It gives good performance for the required task. To challenge the algorithm, the application analyses about 22,000 sample blocks in real time: the sound is captured at a 44,100 Hz rate and a 16 bits sample size, and the analysis is performed twice a second.

The sound analysis library can be used for tone, background noise, sound, or speech detection. Series of the spectrogram of the continued sound can be displayed as a 2D (or 3D) image to present it visually.

## History

• 1st January, 2009: Initial version
• 2nd January, 2009: Added algorithm code snippet
• 3rd August, 2010: Corrected article typos; new frequency detection algorithm

## Share

 Software Developer United States
No Biography provided

 How do I FFT only part of spectrum? Bengt Thulin23-Mar-10 6:49 Bengt Thulin 23-Mar-10 6:49
 How to determine how long a note is held for? me8meme9me13-Mar-10 4:43 me8meme9me 13-Mar-10 4:43
 how about in VB.net? peter8711-Mar-10 23:57 peter87 11-Mar-10 23:57
 Re: how about in VB.net? me8meme9me13-Mar-10 4:59 me8meme9me 13-Mar-10 4:59
 language bintangtan7-Mar-10 18:01 bintangtan 7-Mar-10 18:01
 Problems running FFT Guitar Tuner on Windows 7... Hmmmmm Flemming Jensen217-Jan-10 1:30 Flemming Jensen2 17-Jan-10 1:30
 msg problem: is not a win32 valid application angelo carlt6-Jan-10 6:35 angelo carlt 6-Jan-10 6:35
 Hi i am trying this solution but i am getting a problem to get the device. When i invoque to get the devices in the machine it doesnt work. Can you help me??? Thanks!
 Re: msg problem: is not a win32 valid application notmasteryet6-Jan-10 16:25 notmasteryet 6-Jan-10 16:25
 Re: msg problem: is not a win32 valid application angelo carlt7-Jan-10 12:03 angelo carlt 7-Jan-10 12:03
 Re: msg problem: is not a win32 valid application daylightdj17-Mar-10 1:26 daylightdj 17-Mar-10 1:26
 Re: msg problem: is not a win32 valid application angelo carlt17-Mar-10 17:20 angelo carlt 17-Mar-10 17:20
 Re: msg problem: is not a win32 valid application daylightdj24-Mar-10 1:35 daylightdj 24-Mar-10 1:35
 pls help me. . . clareese6-Jan-10 1:34 clareese 6-Jan-10 1:34
 Re: pls help me. . . notmasteryet6-Jan-10 16:20 notmasteryet 6-Jan-10 16:20
 Re: pls help me. . . proximity33-Jul-10 2:44 proximity3 3-Jul-10 2:44
 high strings tuned rifffff1-Sep-09 4:35 rifffff 1-Sep-09 4:35
 Nice Job!! [modified] ezcodez21-Jul-09 22:27 ezcodez 21-Jul-09 22:27
 Very usefull squiso13-Jul-09 18:11 squiso 13-Jul-09 18:11
 Re: Very usefull notmasteryet14-Jul-09 17:31 notmasteryet 14-Jul-09 17:31
 Inverse transform rafaelverisys7-Jul-09 5:27 rafaelverisys 7-Jul-09 5:27
 Re: Inverse transform notmasteryet7-Jul-09 12:41 notmasteryet 7-Jul-09 12:41
 Re: Inverse transform rafaelverisys8-Jul-09 7:05 rafaelverisys 8-Jul-09 7:05
 Running Vista and DirectX 10 stzahi25-Jun-09 18:17 stzahi 25-Jun-09 18:17
 Re: Running Vista and DirectX 10 bmac20-Jul-13 6:10 bmac 20-Jul-13 6:10
 Last Visit: 19-Jul-19 17:20     Last Update: 19-Jul-19 17:20 Refresh « Prev123456 Next »