Click here to Skip to main content
12,894,200 members (59,405 online)
Click here to Skip to main content
Add your own
alternative version


43 bookmarked
Posted 16 Jun 2009

Session of low-level optimization of memory usage in C++ programs with total exposure

, , 22 Jun 2009 CPOL
Rate this:
Please Sign up or sign in to vote.
In this article, we will try to make our algorithms work faster using the methods of low-level optimization of memory allocation in C++.


  1. Optimization of "Concrete Factories" (variations of the Pimpl idiom)
  2. Optimization by "Arena"

"In computing, optimization is the process of modifying a system to make some aspect of it work more efficiently or use fewer resources. The system may be a single computer program, a collection of computers, or even an entire network such as the Internet.

Although the word "optimization" shares the same root as "optimal", it is rare for the process of optimization to produce a truly optimal system. Often, there is no "one size fits all" design which works well in all cases, so engineers make trade-offs to optimize the attributes of greatest interest.

Donald Knuth made the following statement on optimization: "We should forget about small efficiencies, say about 97% of the time: premature optimization is the root of all evil." An alternative approach is to design first, code from the design, and then profile/benchmark the resulting code to see which parts should be optimized."

(с) Wiki


In this article, we will try to make our algorithms work faster using the methods of low-level optimization of memory allocation in C++. It should be clear that all methods described in this article should be used very carefully and just in the exceptional cases: usually, we have to pay for all low-level optimization elements that we use by flexibility, portability, clearness, or scalability of the resulting application.

But, if you have exactly that specific case and have no way back – then you’re welcome.

Optimization of "Concrete Factories"

I think that a lot of you have repeatedly met the classic "Factory" pattern, or the "Concrete Factory" in GoF. terminology:

struct IObject
     virtual ~IObject(){}
     virtual void DoIt()=0;
class CFactory
    void CreateSmth(int iValue, std::auto_ptr <IObject> * pResult)
        if (iValue<0)
            pResult->reset(new CObject1);
            pResult->reset(new CObject2);

This pattern is great for avoiding endless if’s and switch’es throughout our code, but it has one unpleasant disadvantage. It is concerned with the excessive usage of dynamic memory that sometimes affects badly on the program performance. We will try to cure this pattern of it – with certain reservations, of course.

Let’s follow the factory usage process again:



std::auto_ptr<IObject> product;

We define some containers for the production, the place where the created object will be stored.

MySuperFactory.CreateSmth(1, &product);

We create an object in this container by means of the factory.


We use the object via the defined interface.

mySuperContainer.Add( product );

Or pass the container ownership to somebody else.

To optimize the described life cycle of the production, we can use the following statements:

char buffer[1024];
  • The special form of the new operator – placement new – enables to create objects in the custom "row" buffer. For example:

It is very useful taking into account the fact that we can allocate the buffer more effectively than the standard new implementation does. But actually, using placement new also adds some difficulties to the developer’s life:

  • The row buffer should be aligned by the platform-dependant range.
  • The destructor of the created object should be implemented manually.

Stack is a great alternative for heap. It would be tempting to use a buffer on the stack as the container, i.e., to use:

MyWrapperAroundLocalBuffer<ObjectSize,  IObject> product;

instead of the original:

std::auto_ptr<IObject>  product;

The main problem of the container on the stack creation is that it’s impossible to allocate an object of custom (unknown while compiling) size in standard C++.

But as soon as our factory is a concrete one (and not an abstract) and we know about all of its production types, we certainly will be able to know the maximal size of the object-production on the compilation stage. For example, we can use the type lists:


// typelist basics


template<class Head, class Tail>
struct Node
struct NullNode

We can develop a recursive compile-time function to calculate the maximal size of the object from the types in the list:

template <class List>
struct GetMaxSize
template <class Head, class Tail>
struct GetMaxSize<Node<Head, Tail> >
    static const size_t TailSize = GetMaxSize<Tail>::Result;
    static const size_t Result = (TailSize > sizeof(Head) ) ? TailSize : sizeof(Head);
template <>
struct GetMaxSize<NullNode>
    static const size_t Result = 0;

Then, we can create the list of all possible production types for the factory CFactory:

typedef utils::Node<CObject1>, 
                > ObjectList;
static const size_t MaxObjectSize = utils::GetMaxSize<ObjectList>::Result;

As a result, now we can be 100% sure that each produced object will be placed in a buffer of MaxObjectSize (if we’ve developed the type list correctly, of course):

char buffer[ MaxObjectSize  ];

It can be easily allocated in the stack.

As long as our container is able to store objects of different types, we have a right to expect some help from them in the form of the corresponding interface support:

struct IManageable
    virtual ~IManageable(){}
    virtual void DestroyObject(void * pObject)=0;
    virtual void CreateAndSwap(void * pObject, int iMaxSize)=0;
    virtual void CreateAndCopy(void * pObject, int iMaxSize)=0;

I.e., an object that wants to live in our container should be able to:

  • Destroy the objects of its type by a certain address;
  • Use the Create And Swap technology for passing object ownership (optional);
  • Use the Create And Copy technology for object copy creation (optional).

The structure of the container can be represented in the following scheme:


I.e., our container includes a row buffer and two pointers to the different virtual bases of the object placed in the row buffer:

  • Pointer to IManageable for the management of the object life cycle;
  • Pointer to the user interface IObject whose methods the factory user, in fact, wants to call.

As long as we don’t want to spend efforts on adding support for the IManageable interface to the each production class, it makes sense to develop the pattern manageable that will do it automatically:

// manageable control flags (iFlags field)

const int allow_std_swap = 1; 
const int allow_copy     = 2;
const int allow_all      = 3;

// class manageable: wrapper, provides binary interface to manage object's life

template<class ImplType, int iFlags>
class manageable:public IManageable, public ImplType
    typedef manageable<ImplType, iFlags> ThisType;

    virtual void DestroyObject(void * pObject)
    // CreateAndSwap

    template<int iFlags>
    void CreateAndSwapImpl(void * /*pObject*/, int /*iMaxSize*/)
        throw std::runtime_error("Swap method is not supported");

    void CreateAndSwapImpl<allow_std_swap>(void * pObject, int /*iMaxSize*/)
        ThisType * pNewObject = new(pObject)ThisType();

    virtual void CreateAndSwap(void * pObject, int iMaxSize)
        if (sizeof(ThisType)>iMaxSize)
            throw std::runtime_error("Object too large: swap method failed");
        CreateAndSwapImpl<iFlags & allow_std_swap>(pObject, iMaxSize);

    // CreateAndCopy

    template<int iFlags>
    void CreateAndCopyImpl(void * /*pObject*/, int /*iMaxSize*/)
        throw std::runtime_error("Copy method is not supported");
    void CreateAndCopyImpl<allow_copy>(void * pObject, int /*iMaxSize*/)

    virtual void CreateAndCopy(void * pObject, int iMaxSize)
        if (sizeof(ThisType)>iMaxSize)
            throw std::runtime_error("Object too large: copy method failed");
        CreateAndCopyImpl<iFlags & allow_copy>(pObject, iMaxSize);

    template<class Type0>
    manageable(Type0 param0)
        : ImplType(param0)

The pattern is parameterized by object type and flags that define what methods should be supported. For example, if we specify the allow_copy flag, then the compiler will require the constructor to copy from the object for the CreateAndCopy method implementation; similarly, if we specify the allow_swap flag, then the CreateAndSwap function will be generated – it will be based on the method of the swap object that we should develop ourselves. So, our optimized factory now looks as follows:

class CFastConcreteFactory
    typedef utils::Node<utils::manageable<CObject1, utils::allow_copy>, 
                 utils::Node<utils::manageable<CObject2, utils::allow_copy>, 
                > ObjectList;

    static const size_t MaxObjectSize = utils::GetMaxSize<ObjectList>::Result;
    typedef utils::CFastObject<MaxObjectSize, IObject> AnyObject;

    void CreateSmth(int iValue, AnyObject * pResult)
        if (iValue<0)
            pResult->CreateByCopy(utils::manageable<CObject1, utils::allow_copy>());
            pResult->CreateByCopy(utils::manageable<CObject2, utils::allow_copy>());

And, it is as easy to use as the original one:

// usage sample

CFastConcreteFactory factory;
CFastConcreteFactory::AnyObject product;
factory.CreateSmth(-1, &product);
// copy sample

CFastConcreteFactory::AnyObject another_product;
product.Copy( &another_product );

But the functioning of our creation will be much faster (see fast_object_sample in the attachments).

All source, examples, performance and Unit Tests can be found in the lib MakeItFaster in the attachments. There are also projects for VC++ 7.1 and VC++ 8.0.

See: cmnFastObjects.h, fast_object_sample.

Optimization by «Arena»

The second optimization method proposed is much simpler, but the scope of its application is a little bit smaller.

Let’s imagine that we have some iterative algorithms that repeat some action N times:

int mega_algorithm(int N)
   int Count =0;
   for(int i =0 ; i<N; ++i)
      Count += DoSmth1( );
   return Count;

Let’s suppose that two conditions are met:

  • Algorithm doesn’t have any side effects;
  • We can predict the maximal size of the dynamic memory allocated for an iteration (let’s name it MaxHeapUsage).

In this case, we can use the "Arena" pattern for its optimization. The essence of the pattern is rather simple. For its implementation, we:

  • replace the standard new/delete with our own ones;
  • register some buffer-arena pBuffer with a MaxHeapUsage size before the algorithm starts and set the index pointing on the start of the free space FreeIndex to 0;
  • in the new handlers, we allocate memory directly in the buffer by moving FreeIndex on the allocation value; naturally, we return ((char *) pBuffer + oldFreeIndex);
  • set FreeIndex to 0 after each iteration and so dispose all memory that the iteration has allocated for its needs;
  • unregister our buffer-arena after the algorithm finishes.

It’s very simple and effective. It’s also a very dangerous pattern because it’s rather hard to guarantee the first condition fulfillment in the production code. But this pattern is good for calculation concerned tasks (for example, in the game development).

When using STL containers, the concrete instance of the arena can be referred to the container in such a way that the definition and usage of the container will be almost the same to those of the original one, for example:

typedef utils::arena_custom_map<int,int, 
                    utils::CGrowingArena<1024> >::result Map1_type;
Map1_type map1;

for(int i = 0;i<iNumberOfElements;++i)
   map1[i] = i+1;

In this example, all memory for the object map1 is allocated in the extendable buffer CGrowingArena. The allocated memory will be disposed in the destructor when destroying the object.

All source, examples, performance, and Unit Tests can be found in the lib MakeItFaster in the attachments. There are also projects for VC++ 7.1 and VC++ 8.0.

See: cmnArena.h/win32_arena_tests, win32_arena_sample.

This article on the Apriorit website


This article, along with any associated source code and files, is licensed under The Code Project Open License (CPOL)


About the Authors

No Biography provided

Apriorit Inc
Apriorit Inc.
Hungary Hungary
ApriorIT is a Software Research and Development company that works in advanced knowledge-intensive scopes.

Company offers integrated research&development services for the software projects in such directions as Corporate Security, Remote Control, Mobile Development, Embedded Systems, Virtualization, Drivers and others.

Official site
Group type: Organisation

32 members

You may also be interested in...


Comments and Discussions

GeneralMy vote of 5 Pin
manoj kumar choubey15-Apr-12 23:39
membermanoj kumar choubey15-Apr-12 23:39 
GeneralMy vote of 5 Pin
Heaven202013-Mar-11 6:12
memberHeaven202013-Mar-11 6:12 
QuestionBroken source code fragments? Pin
khb16-Jun-09 23:28
memberkhb16-Jun-09 23:28 
AnswerRe: Broken source code fragments? Pin
Victor A. Milokum17-Jun-09 0:14
memberVictor A. Milokum17-Jun-09 0:14 
AnswerRe: Broken source code fragments? Pin
Apriorit Inc17-Jun-09 0:17
groupApriorit Inc17-Jun-09 0:17 
GeneralRe: Broken source code fragments? Pin
khb17-Jun-09 1:07
memberkhb17-Jun-09 1:07 

General General    News News    Suggestion Suggestion    Question Question    Bug Bug    Answer Answer    Joke Joke    Praise Praise    Rant Rant    Admin Admin   

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.

Permalink | Advertise | Privacy | Terms of Use | Mobile
Web02 | 2.8.170424.1 | Last Updated 23 Jun 2009
Article Copyright 2009 by Victor A. Milokum, Apriorit Inc
Everything else Copyright © CodeProject, 1999-2017
Layout: fixed | fluid