Let's say you have a large database in your program and you want to show the database to the user. You use a
CListCtrl with a couple of columns and fill it with a few thousand, maybe million elements. When you run it, you notice it's a bit (or very) slow. Wouldn't it be great if you didn't need to add all elements to the list, and let the list show them anyway? Does it sound stupid and ridiculous? That's how a virtual list works.
<A name=#virtual>Virtual list
A virtual list is a list that has no data, it only knows how many data items it is supposed to have. But how does it now what data to show? The secret is that the list asks the parent for the information it needs. Assume you have a list with 100 elements, and elements 10-20 are visible. When the list is redrawing, it first asks the parent about element 10. When the parent has answered, the list redraws element 10, and then goes on to the next element.
A virtual list is sending three different messages to the parent.
LVN_GETDISPINFO is sent when the list needs information. This is the most important message. The message
LVN_ODFINDITEM is sent when the user tries to find an item by writing in the list.
LVN_ODCACHEHINT is sent to give you a chance to cache data. You will probably don't care about this message at all.
OK, that's enough fuzzy theory, let's look on some code instead.
<A name=#create>Creating a virtual list
Creating a virtual list isn't much harder than creating an ordinary
CListCtrl. Add a list control in the resource editor as you usually do. Then check the style "Owner data", and then add a
CListCtrl variable for this control. The only difference from an ordinary
CListCtrl is the "Owner data" (
When you work with a virtual list, you use it mostly in the same way you do with a non-virtual list. Adding columns, selecting items, adding image list and much more works exactly the same way.
<A name=#add>Add items to the list
m_list is the control variable for the list. Normally, you add data to the list like this:
m_list.InsertItem(0, _T("Hello world"));
But in a virtual list, this will not work. Instead, it is up to you to handle the data. Instead of adding, you change the number of elements the list is showing:
If you set the item count to 100 or 1,000,000 doesn't matter, the time to run this command will still be practically zero. In a non-virtual list, adding a million elements could take hours.
<A name=#getdisp>Handling the LVN_GETDISPINFO message
As I said before, the list is asking the parent for information when it needs it. The list does this by sending a
LVN_GETDISPINFO message. This is the most important message to handle when you are dealing with a virtual list. A typical function looks like this:
void CVirtualListDlg::OnGetdispinfoList(NMHDR* pNMHDR, LRESULT* pResult)
LV_DISPINFO* pDispInfo = (LV_DISPINFO*)pNMHDR;
LV_ITEM* pItem= &(pDispInfo)->item;
int itemid = pItem->iItem;
if (pItem->mask & LVIF_TEXT)
if(pItem->iSubItem == 0)
text = m_database[itemid].m_name;
else if (pItem->iSubItem == 1)
text = m_database[itemid].m_slogan;
lstrcpyn(pItem->pszText, text, pItem->cchTextMax);
if( pItem->mask & LVIF_IMAGE)
pItem->mask |= LVIF_STATE;
pItem->stateMask = LVIS_STATEIMAGEMASK;
pItem->state = INDEXTOSTATEIMAGEMASK(2);
pItem->state = INDEXTOSTATEIMAGEMASK(1);
*pResult = 0;
First, we create a
LV_DISPINFO pointer, and then a pointer to the item. In
itemid, we save which item we should handle. Then we check the mask in
pItem. The mask is telling us what kind of information the list needs. First, we check if text information is needed. If it is, we first figure out which column the text is. The first column is for names, the second for slogans (several columns will be shown in report view, in other views only first column will be used).
We also check if image information is needed. If it is, we save which image to use in
pItem->iImage (this is the number to an image in the image list connected to the list).
If check boxes are visible, we should send information about that when image information is requested. First, we change
pItem->mask to tell that we are sending state information. We also change
pItem->stateMask to tell what kind of information we are sending. Then we write if check box is on or off.
The mask could also have the flags
LVIF_DI_SETITEM. But I have never used any of them, so I guess they aren't important :-).
It isn't harder to handle the
LVN_GETDISPINFO message than this. Check boxes are probably the hardest, but you will probably never use any more complicated code than I have done in this example. When you have written this function, your list will almost act like a normal list. However, it might be a good idea to implement the
LVN_ODFINDITEM as well.
<A name=#finditem>Handling the LVN_ODFINDITEM message
First, some basic education: start Explorer and go to a folder where you have a lot of files. Press A. What happens? If you have a file or folder that begins with an 'A', that file should now be selected. Press A again. If you have more than one file that begins with an 'A', the second file should be selected. Write "AB". If there is any file that begins with 'AB', that is now selected. This is how every normal list control behaves. Aren't list controls cool? :-).
Let's look on how a list control normally searches:
Anna is selected. When we are writing anything, the list will search down to find the best match. If it reaches the end, it restarts at the top and searches until it is back on the start item (Anna). If "A" is written, Annika should be selected. If "AND" is written, Anders should be selected. If "ANNK" is written, the selection should stay on Anna. If "E" is written, Emma should be selected.
Unfortunately, this doesn't work with virtual lists. A virtual list doesn't try to find any item at all, unless you handle the
LVN_ODFINDITEM message. I usually implement the message like this:
void CVirtualListDlg::OnOdfinditemList(NMHDR* pNMHDR, LRESULT* pResult)
NMLVFINDITEM* pFindInfo = (NMLVFINDITEM*)pNMHDR;
*pResult = -1;
if( (pFindInfo->lvfi.flags & LVFI_STRING) == 0 )
CString searchstr = pFindInfo->lvfi.psz;
int startPos = pFindInfo->iStart;
if(startPos >= m_list.GetItemCount())
startPos = 0;
searchstr, searchstr.GetLength()) == 0)
*pResult = currentPos;
if(currentPos >= m_list.GetItemCount())
currentPos = 0;
}while(currentPos != startPos);
It may not be obvious how this works at a first look, but if you read it carefully, you will understand. Or, you simply skip this, and copy the code and just do the necessary changes - it's up to you :-). If the list is really large, maybe you need to make a faster version of this function, or don't implement it at all.
pFindInfo->lvfi has information on how you should search (like "Restart at top if bottom is reached" or in which direction). I have never cared about that, if you do, you should read in MSDN to get more information.
<A name=#cache>Handling the LVN_ODCACHEHINT message
LVN_ODCACHEHINT is sent to give you a chance to cache data. If you are working with a database that is in another computer in some network, maybe this is useful, but I haven't used this message in any of my programs. A function that handles this message will probably look something like this:
void CVirtualListDlg::OnOdcachehintList(NMHDR* pNMHDR, LRESULT* pResult)
NMLVCACHEHINT* pCacheHint = (NMLVCACHEHINT*)pNMHDR;
*pResult = 0;
This is quite simple as you see. But as usual, simple things don't work :-). According to MSDN, you should override
OnChildNotify and add the handler in this function. But I will not dig deeper in this, if you need more information about this, read in MSDN.
<A name=#change>Changing an item
What should you do to change the data? This is really simple. You don't change the data in the list, but in the database instead. To redraw the list items, call
<A name=#checkbox>Check boxes
Check boxes are useful, but they are quite tricky to implement when you are working with a virtual list. In a normal non-virtual list, check boxes are toggled when you click on them or when you press space. But in a virtual list, nothing will happen. So you have to implement these events yourself. We start with a simple toggle-check-box-function:
void CVirtualListDlg::ToggleCheckBox(int item)
m_database[item].m_checked = !m_database[item].m_checked;
We will call this function when we want to change an item. The function toggles the check box value (in the database!) and forces the list to redraw the item. Quite simple. Toggling a check box when space is pressed is also quite simple. Add a message handler for the
LVN_KEYDOWN message. The function should be something like this:
void CVirtualListDlg::OnKeydownList(NMHDR* pNMHDR, LRESULT* pResult)
LV_KEYDOWN* pLVKeyDown = (LV_KEYDOWN*)pNMHDR;
if( pLVKeyDown->wVKey == VK_SPACE )
if(m_list.GetSelectionMark() != -1)
ToggleCheckBox( m_list.GetSelectionMark() );
*pResult = 0;
We check if space is pressed and if any item is selected before we toggle the check box. To toggle check box when we click on it, we have to do a more complicated function. Add a message handler for the
NM_CLICK message. My function looks like this:
void CVirtualListDlg::OnClickList(NMHDR* pNMHDR, LRESULT* pResult)
NMLISTVIEW* pNMListView = (NM_LISTVIEW*)pNMHDR;
hitinfo.pt = pNMListView->ptAction;
int item = m_list.HitTest(&hitinfo);
if(item != -1)
if( (hitinfo.flags & LVHT_ONITEMSTATEICON) != 0)
*pResult = 0;
We are using
CListCtrl::HitTest to see if we clicked on an item. If we did, the function returns which item we clicked on. We then use
hitinfo.flags to see where we clicked. If the flag
LVHT_ONITEMSTATEICON is on, then we know that the user clicked on the check box (state image).
CListCtrl::HitTest doesn't work as it should if the list view is in "Icon" or "Small icon" mode. In these views,
hitinfo.flags & LVHT_ONITEMSTATEICON is always 0. I haven't found a solution to this, if you do, let me now. However, using check boxes in these modes is probably quite unusual, so this is not a big problem.
Unless you are making something very unusual, you will not need to know more information than there is in this article, to use virtual lists. However, there are some minor compatibility issues between a virtual and a non-virtual list. For example, a virtual list can't sort data. But that is quite obvious, isn't it :-)? You find more information about these issues in MSDN.
When should you use a virtual list, and when should you not? For large lists, I personally prefer a virtual list. But a non-virtual list is usually easier to program (message handling is never fun), so for smaller lists, I use the ordinary list.
A very neat thing about virtual lists is that they are very easy to keep synchronized with a database. You just change the database and redraw the list if necessary. So, if you work with a list where the user should change data in the database, a virtual list could be useful even if number of items are low.
Another nice thing is that you sometimes could generate data when necessary. If you want to show row number in one column, that is very easy to do, and it takes practically no memory at all. In a non-virtual list, you would have to add this data on all items.
- 5 August, 2004 - Initial version.