|
If the parameters are actually constants, how about instantiating a template class?
int const PROCESSOR_COUNT = 42;
template <int processor_count>
scheduler
{
private:
processor_data data[processor_count];
};
scheduler<PROCESSOR_COUNT> sched;
If you have an important point to make, don't try to be subtle or clever. Use a pile driver. Hit the point once. Then come back and hit it again. Then hit it a third time - a tremendous whack.
--Winston Churchill
|
|
|
|
|
Hello there,
I am looking for the best Way/Strategy to "Continuously read data from the HW in real-time and draw some GUI-diagram in Parallel". Performance would be a big matter here since the graph has to be drawn in real-time.
Its just coming to my mind about 1) creating 1 worker-thread for reading process, and 2) another for GUI drawing.
But I am looking for perfection and suggestions here.
1) Is there any specific Design-Pattern that would fit this?. If so, please suggest.
2) Whats the best way(container) to read data by the worker-thread and keep it for the GUI-thread to process. FIFO? or some other class?
Thanks in advance for your suggestion and advice.
|
|
|
|
|
FrankStar89 wrote: Performance would be a big matter here since the graph has to be drawn in real-time.
How many points per second?
Presumably there is no data munging at all?
|
|
|
|
|
Thanks Jschell.
I am not sure yet how many points per sec. ( still in the initial stage.) I think there would be data munging for sure.
Anyway, what I was looking here mostly any "usual Design Pattern" for this kind of problem in general. (1 thread is reading and another is drawing simultaneously).
Thanks again.
|
|
|
|
|
FrankStar89 wrote: I am not sure yet how many points per sec.
That of course would be the first requirement before proceeding. It impacts everything.
|
|
|
|
|
For worker threads, read here.
"One man's wage rise is another man's price increase." - Harold Wilson
"Fireproof doesn't mean the fire will never come. It means when the fire comes that you will be able to withstand it." - Michael Simmons
"You can easily judge the character of a man by how he treats those who can do nothing for him." - James D. Miles
|
|
|
|
|
Thanks David,
That would surely be helpful.
|
|
|
|
|
Hey guys,
I have to write a small program in C, I'll explain what it has to do.
You have product a, b and c
The input is the prices of a, b and c in cents.
You have to spend exactly 100 euros on the purchase of exactly 100 products.
As output I need to get a list of all possible combinations.
Lets give an example. Lets say the input is "88 99 102":
then the output has to be exactly like this:
1 a, 62 b, 37 c
4 a, 48 b, 48 c
7 a, 34 b, 59 c
10 a, 20 b, 70 c
13 a, 6 b, 81 c
I'm relatively new in progamming in C, so all help is appreciated, the deadline is short for this one.
int main(int argc, char *argv[]) {
int a, b, c, x, y, z
printf("price of a:\n");
printf("price of b:\n");
printf("price of c:\n");
scanf("%d, %d, %d" ,&a, &b, &c);
while (x+y+z=100){
x*a+y*b+z*c=10000
As you can see, I tried writing some code, but im stuck right here...
|
|
|
|
|
This is not a programming problem, more one of mathematics. You first need to work out the algorithm to calculate the numbers of each product that you can buy for €100. Once you have that then turning it into code should be fairly trivial.
|
|
|
|
|
A brute force approach would work, e.g.
for ( x = 1; x <= 98; x++)
for ( y = 1; y <= (99 - x); ++y)
{
z = 100 - x - y;
}
|
|
|
|
|
Thanks. I'm finally getting the hang of it. I'll try something tomorrow and I will let you peoples know if I succeed or not.
|
|
|
|
|
|
Thanks again, I make improve in the code, but it ain't working as supposed.
I'm really wondering where the code is wrong, I get no output or a wrong output (e.g. 100 100 100 gives as output only 100 a, 0 b, 0 c.)
I tried different things and I guess I'm almost there, but can't fix it.
So please, help me with this code.
#include <stdio.h>
#include <stdlib.h>
#include <math.h>
int main(int argc, char *argv[])
{
int a, b, c, x, y, z;
printf("price of a:\n");
printf("price of b:\n");
printf("price of c:\n");
scanf("%d, %d, %d" ,&a, &b, &c);
for(x = 0; x <= 100; x++)
{
for(y = 0; y <= (100 - x); ++y)
{
z = 100 - x - y;
if(x*a + y*b + z*c == 10000)
{
printf("%d a, %d b, %d c",x ,y ,z);
}
}
}
return 0;
}
|
|
|
|
|
You don't use correctly scanf. Try
#include <stdio.h>
#include <stdlib.h>
#include <math.h>
int main(int argc, char *argv[])
{
int a, b, c, x, y, z;
int done = 0;
while ( done == 0)
{
printf("please enter the price of a:\n");
if ( scanf("%d", &a) != 1) continue;
printf("please enter the price of b:\n");
if ( scanf("%d", &b) != 1) continue;
printf("please enter the price of c:\n");
if ( scanf("%d", &c) != 1) continue;
done = 1;
}
for(x = 0; x <= 100; x++)
{
for(y = 0; y <= (100 - x); ++y)
{
z = 100 - x - y;
if(x*a + y*b + z*c == 10000)
{
printf("%d a, %d b, %d c\n",x ,y ,z);
}
}
}
return 0;
}
|
|
|
|
|
Thank you so much! It works great. I had to change the code a bit to pass all testcases, but finally I made it  .
However, I'd like to know how that piece of code between the While { ... } works, I don't really get it.
done = 0, so while ( done == 0) is true. Then it runs the code and you can enter the values. But why does it need the done == 0 and why the != 1? I understand the done = 1, otherwise it will run the while statement again, right?
|
|
|
|
|
Well, I don't know why it did not work the first time, but I tried to simplify the code and ended up with:
printf("price of a: price of b: price of c: ");
scanf("%d %d %d", &a, &b, &c);
instead of that thing with while { ... }
And this time, it did work. I do not really see the difference with the code I used before that did not work.. :p
|
|
|
|
|
Even the code you used before would have work with a suitable input, that is if the user would have entered, for instance
100,100,100
that is, with the commas.
However, the code handling input from the user should be more robust.
|
|
|
|
|
Perhaps your problem can be broken up into two smaller problems: 1) Find all combinations of A+B+C that equal (quantity) 100. I *think* that gives you a set of about 4851 combinations. 2) For each of those, multiply A by 0.88, b by 0.99, and C by 1.02, and if that product equals 100 euros, you have a match.
"One man's wage rise is another man's price increase." - Harold Wilson
"Fireproof doesn't mean the fire will never come. It means when the fire comes that you will be able to withstand it." - Michael Simmons
"You can easily judge the character of a man by how he treats those who can do nothing for him." - James D. Miles
|
|
|
|
|
That sounds like a faster way to calculate, because of the smaller set of combinations. I'd like to try that another time, but I don't have the time to do that now before the deadline. Thanks for the tip, nice to see how there are multiple solutions to work it out.
|
|
|
|
|
Hi all,
I need callback functions between different classes. I had already a solution based on stl, which was compilable with VS2010. Unfortunately I was not able to find a way to compile it with VS2015. I got weird error messages.
Now I found a solution with lamda C++11 lambda function pointers. Actually it works, but I have one open issue.
For having a save source code, I want to initialize the function pointer with NULL. But compiler is producing weird error messages again!
My Code:
typedef std::function<bool(int, int, CString*)> _tcedit_cb_;
class MyClass
{
public:
MyClass ()
{
m_cbGetItemData = NULL;
}
_tcedit_cb_ m_cbGetItemData;
...
}
How I can initialize the function callback pointer? I need to initialize in order to avoid running into illegal code!
e.g. I tried to cast ... = (_tcedit_cb_) NULL;
error messages:
c:\program files(x86)\microsoft visual studio 14.0\vc\include\type_traits(1501) : error C2893 : Failed to specialize function template 'unknown-type std::invoke(_Callable &&,_Types &&...)'
1> c:\program files(x86)\microsoft visual studio 14.0\vc\include\type_traits(1501) : note : With the following template arguments :
1> c:\program files(x86)\microsoft visual studio 14.0\vc\include\type_traits(1501) : note : '_Callable=_Decayed &'
1> c:\program files(x86)\microsoft visual studio 14.0\vc\include\type_traits(1501) : note : '_Types={int, int, ATL::CStringT<wchar_t,StrTraitMFC<wchar_t,ATL::ChTraitsCRT<wchar_t>>> }'
1> c:\program files(x86)\microsoft visual studio 14.0\vc\include\functional(210) : note : see reference to function template instantiation '_Rx std::_Invoke_ret<_Rx,_Callable&,_Ty,_Ty,ATL::CStringT<wchar_t,StrTraitMFC<wchar_t,ATL::ChTraitsCRT<wchar_t>>>>(std::_Forced<_Rx,false>,_Callable &,_Ty &&,_Ty &&,ATL::CStringT<wchar_t,StrTraitMFC<wchar_t,ATL::ChTraitsCRT<wchar_t>>> &&)' being compiled
1> with
1>[
1> _Rx = bool,
1> _Callable = _Decayed,
1> _Ty = int
1>]
|
|
|
|
|
Here's a stab in the dark:
Instead of initializing to NULL, try setting it to nullptr .
The difficult we do right away...
...the impossible takes slightly longer.
|
|
|
|
|
oh....you are right!
with nullptr it works!!! never, never used it before!
Many Thanks
Richard
|
|
|
|
|
The objective is to compare the performance of different data structures and algorithm.
The Task= in order to evaluate different ADTs an evaluation with large data must be conducted. Each ADTs should be implememted using any programming language.
choosing a dataset consist of 1000, 10,000, 50,000, 100,000, and 1,000,000 data for evaluation by using random numbers generators.
observations include (a). complexity in creating/building ADTs for the data
(b). complexity to perform insertion, deletion, and search.
the ADTs are .
conduct simple experiment to compare the performance of the different ADts.
are:
Array
Linked List
Stack
Queue
modified 10-Sep-15 16:45pm.
|
|
|
|
|
So what is the question? If the purpose is to calculate the time taken only, then consider using the clock of <ctime> header. Then calculate the time taken to complete the task, pass different number of parameters to it and see the results.
#include <iostream>
#include <ctime>
int main() {
unsigned int start = clock();
your_function(param);
std::cout << "Time taken in millisecs: " << clock()-start;
return 0;
}
This is a native way of doing so, but I would recommend that you try using the API which so ever OS you are using, for example on Windows there are many ways to get the service of a stopwatch in Win32 or even better in Visual C++'s .NET implementation.
Above code from: http://cboard.cprogramming.com/cplusplus-programming/97572-how-do-stopwatch-cplusplus-program.html[^]
The sh*t I complain about
It's like there ain't a cloud in the sky and it's raining out - Eminem
~! Firewall !~
|
|
|
|
|
thanks. but its not just about the time taken only. i updated the questions. please do check again and give me your idea. its killing me here. am confused
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
