For those new to message boards please try to follow a few simple rules when posting your question.
Choose the correct forum for your message. Posting a VB.NET question in the C++ forum will end in tears.
Be specific! Don't ask "can someone send me the code to create an application that does 'X'. Pinpoint exactly what it is you need help with.
Keep the subject line brief, but descriptive. eg "File Serialization problem"
Keep the question as brief as possible. If you have to include code, include the smallest snippet of code you can.
Be careful when including code that you haven't made a typo. Typing mistakes can become the focal point instead of the actual question you asked.
Do not remove or empty a message if others have replied. Keep the thread intact and available for others to search and read. If your problem was answered then edit your message and add "[Solved]" to the subject line of the original post, and cast an approval vote to the one or several answers that really helped you.
If you are posting source code with your question, place it inside <pre></pre> tags. We advise you also check the "Encode "<" (and other HTML) characters when pasting" checkbox before pasting anything inside the PRE block, and make sure "Use HTML in this post" check box is checked.
Be courteous and DON'T SHOUT. Everyone here helps because they enjoy helping others, not because it's their job.
Please do not post links to your question into an unrelated forum such as the lounge. It will be deleted. Likewise, do not post the same question in more than one forum.
Do not be abusive, offensive, inappropriate or harass anyone on the boards. Doing so will get you kicked off and banned. Play nice.
If you have a school or university assignment, assume that your teacher or lecturer is also reading these forums.
No advertising or soliciting.
We reserve the right to move your posts to a more appropriate forum or to delete anything deemed inappropriate or illegal.
Hi everybody! I got a second-hand Pioneer DVR-K17A (a slim burner with IDE interface for my laptop) and I managed to dump the firmware in order to edit it. I would like to increase the number of writable sectors in a DVD-5 by editing the hexadecimal code. Theoretically, in this way I would enable the overburning feature. Using an hex editor, I even saw some interesting strings that could be suitable for being modified, but I need someone who perfectly knows this stuff. I know this is just a minor tweak and I really like experimenting, since the burner's value is very low. I could even upload the firmware file, if someone were interested. So if someone has useful suggestions, please reply to this message, even just for recommending particular forums more focused on firmware modding of burners.
Our team of university engineering postgrads has undertaken a challenge to create from scratch a computer-connected tactile matrix touch pad meant to let blind people sense with their fingers shapes others can see.
Whereas we will eventually need to get the programming job done by professionals, we would like to get a feel of what making a usb connected controller device live.
We would greatly appreciate advice pointing us to the relevant online resources with regards to the following:
- the choice of the programming language - how controllers are programmed these days and which frameworks (if that is the right word) are best to be used - the path to making the chosen framework implementable in a newly designed device - at which stage of the controller design is it supposed to take place
Too easy for you guys? That's okay. I will do the research myself and would only ask for correcting me if I am wrong on something. I hope noone minds my using this thread as a note board and perhaps someone googling for similar information one day will find it useful.
Here is what I found overnight. First of all, I was mistaken about python language. The key word here was "driver".
Windows will require a driver made using a Driver Development Kit to convert ascii sent by the device to the computer (this kind of programming may require putting windows into a virtual machine). The communication is actually going to be in two directions.
Now, I will need to find out how to make an electronic device capable of sending and receiving ascii.
Probably yes, but you need to do the R & D yourself to find out whether it works for what you want. This is really not an easy question to answer since there are so many variables. People here will try to help you with specific questions, but we cannot second guess what might happen in a project that does not yet exist outside of your brain.
Of course, thanks Richard very much for your help.
Like I said, this is an initial phase, but we want to get an outlook of what will be there to be done even as the lab team are working on the mechanics of movement. Therefore, I hope you do not mind me using this forum to verify our team's findings and assumptions. Forums is place where many ideas can get combined into new ones - and one can not always predict what the outcome will be.
Thus, may I use the forum to ask some further questions to a broader public?
I need to exchange some files between a small 8 bit computer and a PC. SD memory cards are accessed by a simple serial protocol and could easily interfaced by the old computer.
Implementing routines to read from a FAT file system would be much work. That's why I would like to use a much simpler file system. On the PC side I would need to write a program that can read and write that file system. In the end I will need low level access to the sectors of the SD card.
Does anybody know a Win32 or .Net library that can do that?
Update: There may be a hardware solution. This device[^] can be hooked up to the old computer's bus as an I/O port and can handle all details of reading or writing to a memory stick. That would eliminate the need to build a custom interface or write code for a specific file system.
"I don't know, extraterrestrial?" "You mean like from space?" "No, from Canada."
If software development were a circus, we would all be the clowns.
I bought an identical monitor (ASUS MX279H 27" Full HD 1920x1080 IPS HDMI DVI VGA Frameless Monitor) to my current setup. Since I only had one DVI port on my computer, I bought an HDMI to DVI splitter per recommendation. Monitor 1 is visible alone. Monitor 2 is visible alone. Monitor 1 replicates to Monitor 2 after some shenanigans. Previously, it was defaulting to 600x480 resolution whenever Monitor 2 was connected, but it is behaving itself now. Unfortunately, I can't get it to recognize the other monitor as a separate monitor. The control panel shows 1 and 2, but if I try to detect 2, the screen either disappears completely on both or it tells me Not Detected and goes back to the 640x480 resolution until I unplug Monitor 2 and reboot again. I've checked all my drivers and everything is supposed to be up-to-date. I'm currently running Windows 10 and I've seen a lot of complaints online about dual monitors setup. Every solution online did not work for me. Any suggestions?
A splitter[^] is good only for screen duplication - it will not let the OS identify that you have two monitors. And as long as OS does not know it will not let you expand the desktop to two monitors...
Skipper: We'll fix it. Alex: Fix it? How you gonna fix this? Skipper: Grit, spit and a whole lotta duct tape.
It may sound weird, but I had similar issues with Win 10 on a laptop (inbuilt screen 1366 x 768) and an external (VGA) monitor of the same resolution. The fix turned out to be updating the video drivers (from the vendor website IIRC). Nothing to lose and all that... It now behaves correctly in that configuration, and also using the HDMI port at either 1366 x 768 or 1920 x 1080.
Good luck, Peter
Software rusts. Simon Stephenson, ca 1994. So does this signature. me, 2012
I got burned to the tune of about $75 and a three day wait last time I had a hard drive failure.
Sure, I "had a backup".
What I learned was that that meant that I had the ability to retrieve THE DATA from the apps which I had, but it DIDN'T MEAN that I had the ability to restore the complete disk.
Now yes, the data from the apps was the critical aspect, but really, paying gobs of money for a "restore" CD (and waiting for delivery, for which I paid more money, for the "expedited" service to my low density populated town) well,,, you get the idea.
Okay, so I want to prepare for the next hard drive failure.
This time, I want to use a package that allows me to...
Copy the disk (i.e., the entire image) to the external unit
Change the hard drive
Boot from a CD-Rom
Restore the full image
Reboot and resume with an identical hard drive
I'm Currently running Windows 7 on this machine.
Any and all advice is welcome.
Immediate questions in my head include...
What do I want ?
What questions do I ask ?
Whom do I ask ?
How do I recognize the idiot packages such as the one I used before ?
What are the terms I want to see on the marketing hype ?
Hello, I am trying to follow this link Simple I/O device driver for RaspberryPi[^] I tried the same for Pi2 B model but it is not working as it should. I changed the address to 3f000000(for pi2 b) and it is building the kernel module. But when I try to use see the output at 15th port, nothing is there. I tried 3f200000 address, but that module was not loading with insmod command. It throws an error "no such device". I checked the /proc/devices file and saw 3f200000 to 3f2000b3 already mapped with gpio, so maybe cannot use that same address to create this driver. Please help me rectify this.
Hi, In 89C51SND1C-UL digital tube selected, segment are used in P0 mouth. How to write a program. The datasheet of 89C51SND1C-UL is here http://www.kynix.com/Detail/1155480/89C51SND1C-UL.html This is a buzzer program.The bit-choice is in P2. I want to consult if I want to change bit-choice at P0 mouth, how to change the program. I convert P2 directly into P0 mouth. It doesn't work. I'm still learning single-chip computer.
Few things on "how" Have a pseudoce about WHAT is the purpose of the code showing inputs / outputs. Than CHANGING the output would be more visible in code. Get into habit to comment your code. I do 80% comments and 20% real code ratio. I realize your construct your code using your native language that write it in English, so that is why there are no (English) comments in your code.
Find a IDE which allows you to set breakpoints or use some other method to track your code. Good luck