The purpose of this article is to illustrate how to correctly launch an interactive process from a service in Windows Vista, and also to demonstrate how to launch that process with full Administrator privileges. An interactive process is one that is capable of displaying a UI on the desktop.
The article shows how to create a service called LoaderService that serves as an application loader and whose purpose is to launch, at boot time, a command prompt that runs as an Administrator. The article closes with a section discussing how the code could be extended for more practical purposes.
Sessions in Vista
Let’s start from the beginning… you have just booted up your computer and are about to log on. When you log on, the system assigns you a unique Session ID. In Windows Vista, the first User to log on to the computer is assigned a Session ID of 1 by the OS. The next User to log on will be assigned a Session ID of 2. And so on and so forth. You can view the Session ID assigned to each logged on User from the Users tab in Task Manager:
Notice, I indicated that the User named Pero is in control of the Console. In this case, I mean the Physical Console. The Physical Console consists of the monitor, keyboard, and mouse. Since Pero is in control of the keyboard, monitor, and mouse, he is considered the currently active User. However, since Users can be impersonated, it is more appropriate to reference the currently active Session rather than the currently active User. The Win32 API contains a function called
WTSGetActiveConsoleSessionId() which returns the Session ID of the User currently in control of the Physical Console. If we were to call that method right now, it would return a value of 1 because that is the Session ID of the User Pero.
There exists a special Session in Vista that has a Session ID of 0. This is commonly referenced as Session0. All Windows Services run within Session0, and Session0 is non-interactive. Non-interactive means that UI applications cannot be launched; however, there is a way around this by activating the Interactive Services Detection Service (ISDS). This not a very elegant solution, and will not be covered in this article. There is a quick 5 minute Channel 9 video that demonstrates the ISDS for those interested. This article assumes the absence of the ISDS. Now, because Session0 is not a User Session, it does not have access to the video driver, and therefore any attempts to render graphics will fail. Session0 isolation is a security feature added in Vista to isolate system processes and services from potentially malicious user applications.
This is where things get interesting. The reason for this isolation is because the System account (or System User) has elevated privileges that allow it to run unhindered by the restrictions of Vista UAC. If everything were running under the System account, Vista UAC might as well be turned off.
Now, I know what you’re thinking, “If Windows Services run in Session0, and Session0 cannot start processes that have a UI, then how can our loader service spawn a new process that not only has a UI, but that also runs within the currently logged on User’s Session?” Take a look at this screenshot from the Processes tab in Task Manager, and pay particular attention to the winlogon.exe processes:
Notice there are two winlogon.exe processes, and the User who owns both of those processes is the System User. The System User is a highly privileged User unhindered by the Vista UAC that we were talking about earlier. Also, notice the Session IDs that indicate within which Sessions the winlogon.exe processes are running. If you remember from earlier, Session ID 1 refers to the User Pero’s Session, and Session ID 2 refers to the User Sienna’s Session. This means that there is a winlogon.exe process running under the System account within Pero’s Session. It also means that there is a winlogon.exe process running under the System account within Sienna’s Session. This is the appropriate time to mention that any Session with an ID greater than 0 is capable of spawning an interactive process, which is a process capable of displaying a UI.
The solution may not be totally clear yet, but it will be shortly, as now it is time to discuss our strategy!
First, we are going to create a Windows Service that runs under the System account. This service will be responsible for spawning an interactive process within the currently active User’s Session. This newly created process will display a UI and run with full admin rights. When the first User logs on to the computer, this service will be started and will be running in Session0; however the process that this service spawns will be running on the desktop of the currently logged on User. We will refer to this service as the LoaderService.
Next, the winlogon.exe process is responsible for managing User login and logout procedures. We know that every User who logs on to the computer will have a unique Session ID and a corresponding winlogon.exe process associated with their Session. Now, we mentioned above, the LoaderService runs under the System account. We also confirmed that each winlogon.exe process on the computer runs under the System account. Because the System account is the owner of both the LoaderService and the winlogon.exe processes, our LoaderService can copy the access token (and Session ID) of the winlogon.exe process and then call the Win32 API function
CreateProcessAsUser to launch a process into the currently active Session of the logged on User. Since the Session ID located within the access token of the copied winlogon.exe process is greater than 0, we can launch an interactive process using that token.
Now for the fun stuff… the code!
The Windows Service is located in a file called LoaderService.cs within the Toolkit project. Below is the code that gets called when the
LoaderService is started:
protected override void OnStart(string args)
String applicationName = "cmd.exe";
ApplicationLoader.StartProcessAndBypassUAC(applicationName, out procInfo);
The code above calls the
StartProcessAndBypassUAC(...) function which will launch a command prompt (with full admin rights) as part of a newly created process. Information about the newly created process will get stored into the variable
The code for
StartProcessAndBypassUAC(...) is located in the file ApplicationLoader.cs. Let’s dissect that function to examine how a service running in Session0 will load a process into the currently logged on User’s Session. To begin, we will obtain the Session ID of the currently logged on User. This is achieved by making a call to the Win32 API function
uint dwSessionId = WTSGetActiveConsoleSessionId();
Next, we will obtain the Process ID (PID) of the winlogon.exe process for the currently active Session. Remember, there are two Sessions currently running, and if we copy the access token of the wrong one, we could end up launching our new process on another User’s desktop.
Process processes = Process.GetProcessesByName("winlogon");
foreach (Process p in processes)
if ((uint)p.SessionId == dwSessionId)
winlogonPid = (uint)p.Id;
Now that we have obtained the PID of the winlogon.exe process, we can use that information to obtain its process handle. To do so, we make a Win32 API call to
hProcess = OpenProcess(MAXIMUM_ALLOWED, false, winlogonPid);
Having acquired the process handle, we can make a Win32 API call to
OpenProcessToken(...) to obtain a handle to the access token of the winlogon.exe process:
if (!OpenProcessToken(hProcess, TOKEN_DUPLICATE, ref hPToken))
With a handle to the access token, we can proceed to call the Win32 API function
DuplicateTokenEx(...) which will duplicate the access token:
SECURITY_ATTRIBUTES sa = new SECURITY_ATTRIBUTES();
sa.Length = Marshal.SizeOf(sa);
if (!DuplicateTokenEx(hPToken, MAXIMUM_ALLOWED, ref sa,
(int)TOKEN_TYPE.TokenPrimary, ref hUserTokenDup))
There are many advantages to duplicating an access token. Most notable in our case is that we have a new copy of a primary access token which also contains within it the associated logon Session of that copied token. If you refer to the Task Manager screenshot above that shows the two winlogon.exe processes, you will notice that the duplicated Session ID will be 1, which is the Session ID of the currently logged on User, Pero. We can now call the Win32 API function
CreateProcessAsUser to spawn a new process within the Session of the currently logged on User; in this case, the process will spawn in the Session of the User Pero. To summarize, the code below runs in Session0, but will launch a new process in Session 1:
STARTUPINFO si = new STARTUPINFO();
si.cb = (int)Marshal.SizeOf(si);
si.lpDesktop = @"winsta0\default";
int dwCreationFlags = NORMAL_PRIORITY_CLASS | CREATE_NEW_CONSOLE;
bool result = CreateProcessAsUser(hUserTokenDup,
The above code will launch a command prompt that is running as an Administrator under the System account. I’d like to comment on the parameter
@"winsta0\default". This is a hard-coded
String that Microsoft arbitrarily chose to indicate to the OS that the process we are about to spawn in
CreateProcessAsUser should have full access to the interactive windowstation and desktop, which basically means it is allowed to displayed UI elements on the desktop.
That’s all there is to the code. Now, let’s discuss how to deploy this service using an MSI, and how to configure it to launch automatically when the computer boots up!
Deploying the Code
The most efficient way to deploy our code is to create an MSI installer for it. However, we have to first perform a couple of tasks to prepare our service for installation. To begin, we need to add an installer for our LoaderService. To add an installer, open up the LoaderService.cs designer. Then, right-click, and select Add Installer:
The above action adds a new class to the project called
ProjectInstaller. This class inherits from the
Installer class. There are two components visible on the designer of ProjectInstaller.cs that I have renamed for clarity to
loaderServiceProcessInstaller control allows us to specify the account under which the LoaderService will run. This account has been set to System:
Now, we are ready to add a Setup project. The primary output of the Setup project is set to the Toolkit project, which contains our LoaderService. This step is fairly trivial, and I will not be going through the details of adding it. However, I would like to comment that we need to hook up the
ProjectInstaller class to this MSI. If we do not, then the contents of the Toolkit project will be deployed, but the LoaderService will not get registered as a Windows Service. To add a custom action, right-click on the Setup project and go to View > Custom Actions. From here, you can add a custom action. Specifying the custom action as the primary output from Toolkit is enough to hint to it that there is a custom installer, in our case
ProjectInstaller, that needs to be run. Remember,
ProjectInstaller is the installer class actually responsible for registering the service with Windows:
Now, it's time to run the code and see the fruits of our labor!
Running the Code
To verify the code is working as expected, we will build the MSI and install it. When you install the MSI, you will notice a UAC prompt asking you to confirm the install. A good Marine friend of mine once told me the Marines have a saying, "Once a Marine, always a Marine." In hacking and computer security, that would translate to, "Once an Administrator, always an Administrator." This is the one and only time a User who installs your project will be presented with a UAC pop-up. Since most MSIs need Administrator privileges to install, this should come as no shock to the User.
After installation, you will notice the service has been registered to start automatically (by the
ProjectInstaller); however, this will only happen on the next reboot. You can also start it manually. This article assumes you have chosen to reboot. Notice, when the computer reboots, you are displayed with a command prompt that is running as an Administrator:
From here, you can type in regedit, gpedit.msc, or whatever command you like, and it will bypass the Vista UAC prompt. What’s more is that the currently logged in User need not even be an Administrator to take advantage of this command prompt. The reason being is that the command prompt is running under the System account. This can be seen from the Task Manager in the screenshot below. Also take note of the Session ID:
But, what about our LoaderService? Where is it, and under which Session is it running? Let’s take another look at Task Manager to figure this out:
We have just successfully bypassed Vista UAC and illustrated how to correctly spawn an interactive process from a Windows Service. But, there is more we can do!
Beyond the Fundamentals
The topics discussed in this section are not contained in the downloadable code. The reason being to keep the example solution as simple as possible. The ideas below are meant to illustrate how the example code can be extended to support different types of scenarios.
A Generic Solution
Most Windows Services are started when the first User logs on to the computer, and they are launched in Session0. The way our code is currently written is such that only the first User who logs on to the computer will have the command prompt launched in their Session. The reason for this is that our
LoaderService spawns the process from its
OnStart function. The
OnStart function executes only once, and that is when the service is first started. Since the first User to log on to the system has the net effect of starting all services in Session0, he is the User whose Session ID will be retrieved in the
OnStart function when it calls
OnStart function in LoaderService.cs has been repeated below for clarity:
protected override void OnStart(string args)
String applicationName = "cmd.exe";
ApplicationLoader.StartProcessAndBypassUAC(applicationName, out procInfo);
So then, how can we configure our
LoaderService to launch the command prompt for every User on the computer the first time that they log on? The solution is in the
OnStart function: either wire-up a
Timer, or spawn a
Thread that runs in an infinite loop every so many seconds (
Thread.Sleep(1000) can be used to control how often the
Thread runs). We can use a
List<int> object to keep track of all the Session IDs that we have already launched our process in. Every time our
Thread executes, we check to see if the Session ID has changed. The currently active Session ID can be retrieved by calling
WTSGetActiveConsoleSessionId(). If the Session ID has changed, we check to see if we have launched our process into that Session. If we have not, then we call
StartProcessAndBypassUAC and add the Session ID to the
Launching an Application On Demand
It may be the case that you do not want your application to start immediately when Users log on to the computer. You may have an application that should only be loaded when the User chooses to run it. In addition, you may want this application and functionality to be available to every User on the system. The question then is how can our
LoaderService accommodate this while still bypassing Vista UAC?
Before we begin this discussion, let’s quickly talk about how UAC applies with regard to file and folder access. Vista supports the notion of Special Folders. There are several Special Folders in Vista, but the one we are going to focus on is the Documents folder. In .NET, you can query Special Folder locations by calling
If you spend enough time on your computer, you may have noticed that you can freely create, modify, and delete files located in your Documents folder without any interference from UAC. However, if you navigate to another User’s Documents folder, you will be greeted with a UAC prompt asking for an Administrator’s permission to touch the folder. You may have also noticed that there is a public Documents folder shared and accessible by all Users. In Vista, the path to this Special Folder is C:\Users\Public\Documents. Any User on the system can freely create, modify, and delete files located here without any interference from UAC.
Now, we are able to craft a solution! We can modify the
OnStart function of our
LoaderService to start an instance of the
FileSystemWatcher class, and configure it to watch for changes to the public Documents folder, which all Users have access to. We will have to create a new Console application to communicate with the
LoaderService via text files (do not confuse this Console application with the Console Session). The code for the Console application will look like the following:
static void Main(string args)
string filename = @"C:\Users\Public\Documents\appToLoad.txt";
using (StreamWriter sw = new StreamWriter(filename, false))
sw.WriteLine("SessionID=" + WTSGetActiveConsoleSessionId());
Upon seeing the file appToLoad.txt, the
LoaderService would parse the file and launch a command prompt in the currently active Session. At this point, we have successfully illustrated how to use a user application to communicate with a service, and how to have it launch an application for us with full Administrator rights and also bypassing Vista UAC in the process.
- 21/04/2009: Initial release.