|
ok i will check it out,
Thank you for your help.
|
|
|
|
|
The MousePosition property is always given in relation to the desktop, and controls are always given in relation to their immediate parent... But WinForms controls have a PointToScreen() function and a PointToClient() function.
Control.PointToScreen(pt): Take a point in control coordinates (Measured in relation to the top-left corner of the control), and return them in screen coordinates
Control.PointToClient(pt): Take a point in screen coordinates, and return them in relation to the control.
If you want everything in the same scope, for example, in relation to your Form:
myForm.PointToClient(myButton.PointToScreen(new Point(0,0)))
(This will work regardless of how nested your controls are, so if the button is inside a panel which is inside another panel, this will still give you the right coordinates)
myForm.PointToClient(MousePosition)
Alternatively, instead of using MousePosition, you can use e.X and e.Y (From the MouseEventArgs in the event), which will always be in relation to the control raising the event.
|
|
|
|
|
That fixed my problem!
Really thanks for the answer.
|
|
|
|
|
Hi, everyone. The situation is, I am converting a tiff image file into byte[], then to stream then saving it as jpeg image format, then display it on browser, so that the jpeg opens in a picture viewer instead of webpage. The code works in IE 6 and firefox, but does not work in IE 7. In IE 7, the blank page appears and automatically closes. The code is as follows:-
System.IO.Stream _stream = new MemoryStream(byteArray);
Bitmap _bmp = new Bitmap(_stream);
Response.Clear();
Response.AddHeader("Content-Disposition","attachment;filename=adc.gif");
Response.ContentType = "image/gif";
_bmp.Save(Response.OutputStream, ImageFormat.Gif);
Response.End();
_bmp.Dispose();
_stream.Close();
This code is called in the page_load of a page in server a. Since the tiff image is located on a different server(server b) other than the web server, the image path is passed to web service located at server b, image is read and converted to byteArray and returned to server a. I guess the problem is with Content-Disposition.
Any help is appreciated.
|
|
|
|
|
Just a guess, but you might have more luck with the ASP.NET forum we have here.
|
|
|
|
|
sudhirBirlapur wrote: The code works in IE 6 and firefox, but does not work in IE 7.
I tested your code and it works fine for me on IE7 
Manas Bhardwaj
Please remember to rate helpful or unhelpful answers, it lets us and people reading the forums know if our answers are any good.
|
|
|
|
|
Hi, Manas. Thanks for your time. Could you please post the exact code you have used and the html source. Also I am using default IE 7 settings, but its not working, also the website url that I'm checking starts with https://, not http://
Regards,
Sudhir
|
|
|
|
|
How can i write usb driver software for microcontrollers?
i have a poject with microcontroller. When my project connects with usb cable to PC so i want my software connects with microcontroller.i want to send data and get data from microcontroller. i wish i could explain my aim.
for example when i click a button in PC side(in visual studio or delphi etc.) so microcontroller and pc can send-get datas with usb cable.
|
|
|
|
|
Mir_As wrote: How can i write usb driver software for microcontrollers?
Using C#?? You can't. The microcontroller cannot run the .NET Framework, so any C# code you write will also not run.
You can write an app to talk to something on the microcontroller, but whatever you write for the micro will most likely have to be written in C, not C#. How you do the communication depends entirely on the micro and how you expose the data to the outside world. It's entirely up to you.
|
|
|
|
|
i want to write driver for my microcontroller. when i connect to microcontroller project to Pc so i want they connect eachother.and send and get datas. i think it can be.but how? serialports connect to microcontroller i think USB can connect to microcontrollers too.
|
|
|
|
|
Mir_As wrote: i want to write driver for my microcontroller
You where just explained that a task like that is geared for C, not .Net.
|
|
|
|
|
What part of "you can NOT run a C# app on a microcontroller" is so difficult to understand?
|
|
|
|
|
okay thats right, but what if we merge the .Net Framework with the application ?
TVMU^P[[IGIOQHG^JSH`A#@`RFJ\c^JPL>;"[,*/|+&WLEZGc`AFXc!L
%^]*IRXD#@GKCQ`R\^SF_WcHbORY87֦ʻ6ϣN8ȤBcRAV\Z^&SU~%CSWQ@#2
W_AD`EPABIKRDFVS)EVLQK)JKQUFK[M`UKs*$GwU#QDXBER@CBN%
R0~53%eYrd8mt^7Z6]iTF+(EWfJ9zaK-iTV.C\y<pjxsg-b$f4ia> -----------------------------------------------
128 bit encrypted signature, crack if you can
|
|
|
|
|
First, you'll have to find a compiler that will generate native code with the app and framework all rolled into one. There are some out there, but they cost a small fortune to buy.
Next, that compiler will have to generate native code for the CPU in the microcontroller. That probably doesn't exist.
Those compilers will generate code libraries that are significantly larger than the app itself. You'll have to make sure the MC has the storage capacity to hold such a large executable.
Lastly, the .NET CLR depends on Windows, which the MC will not run.
|
|
|
|
|
Xmen W.K. wrote: okay thats right, but what if we merge the .Net Framework with the application ?
Good luck!
|
|
|
|
|
Like I'm gonna test ? It was just an idea. Thats it...
TVMU^P[[IGIOQHG^JSH`A#@`RFJ\c^JPL>;"[,*/|+&WLEZGc`AFXc!L
%^]*IRXD#@GKCQ`R\^SF_WcHbORY87֦ʻ6ϣN8ȤBcRAV\Z^&SU~%CSWQ@#2
W_AD`EPABIKRDFVS)EVLQK)JKQUFK[M`UKs*$GwU#QDXBER@CBN%
R0~53%eYrd8mt^7Z6]iTF+(EWfJ9zaK-iTV.C\y<pjxsg-b$f4ia> -----------------------------------------------
128 bit encrypted signature, crack if you can
|
|
|
|
|
The short answer is: NO
1. PC side
if your microcontroller is to show up as a special peripheral to your PC, with an entry in the Hardware list, with multi-user capabilities, etc, then you need a device driver; such drivers can not be written in any of the .NET languages, the CLR isn't capable of doing system work.
if your microcontroller:
1) would be connected through a serial port (possibly using a USB-to-RS232C cable plugged into one of your PC's USB ports),
2) would not be a multi-user device
3) would not need permanent software support
then you could develop an app in any language you choose, including C#. It then couldt use the SerialPort class and go without a special driver.
2. Target side
microcontrollers in general don't support .NET, and most people still believe you need .NET to run a C#-based app, so no there will not be any C# code running on the microcontroller.
(One could create a cross-compiler for C# and compile it to either native or intermediate language, and come up with a small virtual machine to execute it; there is a sufficient number of small Java examples around to proof it is possible; I have not seen anyone do it for C# though).
Luc Pattyn
Have a look at my entry for the lean-and-mean competition; please provide comments, feedback, discussion, and don’t forget to vote for it! Thank you.
Local announcement (Antwerp region): Lange Wapper? Neen!
|
|
|
|
|
Luc Pattyn wrote: and most people still believe you need .NET to run a C#-based app
 You just blew my mind.
|
|
|
|
|
Luc Pattyn wrote: I have not seen anyone do it for C# though
A new article perhaps?  If you do, let me know - it would be VERY interesting!
|
|
|
|
|
No, I have no such intentions; I am happy with C# (or Java) on a PC, and C and Java everywhere else.
Luc Pattyn
Have a look at my entry for the lean-and-mean competition; please provide comments, feedback, discussion, and don’t forget to vote for it! Thank you.
Local announcement (Antwerp region): Lange Wapper? Neen!
|
|
|
|
|
You probably won't need to write your own driver (if you do you will need to delve into the dark world of C/C++). Find the most suitable USB class[^] for your device, implement that in you µC's code and you can use the Windows USB driver for that class.
Many µC manufacturer's already have code available for most common scenarios (so you may not even need to code the USB implementation at the µC side) and some even have their own drivers already written for you for when the generic Windows drivers won't do.
I experimented briefly with this with a PIC and the USB MIDI spec with sucess after a lot of trial and error - google will be your friend when you know exactly what to search for.
|
|
|
|
|
two machine can communicate using remoting but in this case two machine has to be in same lan and this a limitation. so please anyone help me that how one machine can communicate with other one over the internet with remoting if there no lan connection between two machine.if possible then please help me with sample code.
tbhattacharjee
|
|
|
|
|
You'll need to use Web Services, or better yet, use WCF so it can easily be configured to use any (supported) protocol
only two letters away from being an asset
|
|
|
|
|
It's no different, though the networks on both ends would have to be reconfigured to forward requests to the proper machines. directly exposing your machines to the Internet would be suicidal. There's a variety of ways to do it, all of which as beyond the scope of a forum post. You just have to know how TCP/IP networking works.
|
|
|
|
|
Well, I'm workin' on the same thing for 1 month and till the date I found the best way is use of web service as a bridge between your PC and other PCs. The following article may help about it.
How to Get Notifications from a .NET Web Service
TVMU^P[[IGIOQHG^JSH`A#@`RFJ\c^JPL>;"[,*/|+&WLEZGc`AFXc!L
%^]*IRXD#@GKCQ`R\^SF_WcHbORY87֦ʻ6ϣN8ȤBcRAV\Z^&SU~%CSWQ@#2
W_AD`EPABIKRDFVS)EVLQK)JKQUFK[M`UKs*$GwU#QDXBER@CBN%
R0~53%eYrd8mt^7Z6]iTF+(EWfJ9zaK-iTV.C\y<pjxsg-b$f4ia> -----------------------------------------------
128 bit encrypted signature, crack if you can
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
