|
|
| use bcc to send mail to multiple users each mail separated by a comma(,). hi
|
|
|
|
|
hi sir,
i am new in asp.net.sir i want to know that is there any java script with the help of which we can stop page reloading at the time of using ajax control.
sir i know that update panel can do this.but sir i do not want to use update panel.i mean i want to stop my page reload without using update panel while i am using ajax.
|
|
|
|
|
Hi guys need advise
Currently , i need to create a crystal report. However i need to create a very dynamic one as i do not have a fix amount of fields. I was just wondering is that any solution that i can create the field i need using code behind to display out on the rpt file.
Normally we will drag the field from dataset to define those fields to display. Now i am asking if there is a way to do it at code behind level with out dragging from dataset?
KaKaShi HaTaKe
|
|
|
|
|
Hi All
I have a following requirement.At runtime I have to add multiple blocks of images into PlaceHolder/Panel>A block contains two images(LHSImage and RHSImage) with some HTML format as shown below.I know images can be added easily into a panel or Placeholder directly at runtime but donot know how to add with html format.
$div id="parentDiv" style="width:100%;float:left;display:inline"$
$div id="LHSDiv" style="width:50%;margin-bottom:10px"$
$/div$
$div id="RHSDiv" style="width:50%"$
$/div$
$/div$
Note:
1. %Path% is calculated at runtime.
2. < angle brackets of divs are replaced by $
Adding HTML markup is mandatory. I donot want to achieve what I want by setting properties of images such as Top,Height etc.HTNL markup should be added.
Any help will be appreciated.
Thanks
Regards
Sandeep Kalra
|
|
|
|
|
Hi all,
I am trying send mail. I added email settings to web.config
<system.net>
<mailSettings>
<smtp from="donotreply@mydomain.com">
<network host="smtp.gmail.com" password="xxxxxx" port="25" userName="admin@mydomain.com" defaultCredentials="false"/>
</smtp>
</mailSettings>
</system.net>
<b>The problem is when i am sending mail, mail delivers. But with from address admin@mydomain.com [userName] but not 'donotreply@mydomain.com'</b>
any solution. To change the from address [avoiding UserName as From address].
Regards,
sekhar
|
|
|
|
|
sekhar.k wrote: donotreply@mydomain.com
Does this mail address exist ?
|
|
|
|
|
Hi Abijit.
Thanks for ur response.
donotreply@[mydomainhere].com is exist, but in-place of 'mydomain' we have our domain name.
The mail actually delivers to given to address. But there it showing from address as 'admin@mydomain.com' which is username used in web.config mailSettings. But i need from address as 'donotreply@[mydomainhere].com'.
any suggestions.
regards,
kv sekhar
|
|
|
|
|
Ok, you can set the Name for mail address. That will display whatever name you provide with the adderess.
MailAddress from = new MailAddress("admin@mydomain.com", "donotreply@[mydomainhere].com");
|
|
|
|
|
Hi Abijit,
I tried your logic by sending a sample email to my email address[gamil]. But no use.
The display name appears in 'from' but it also shows the 'userName' when we click on 'show deails' link.
When i open my mail from inbox. It displays the from as 'donotreply@[mydomainhere].com'. But when i click on 'show details' link it displays like below.
"donotreply@[mydomainhere].com" <admin@mydomain.com>
I don't want show 'UserName' in Recipient user. Because its a credential.
Any solution?
Regards,
kv sekhar
|
|
|
|
|
I'm trying to use OpenOffice 3.1 for Opening the Office Word template as well as modifying it dynamically with Database fields information at the time of opening the document from my harddisk srored loction.
I'm successfully opening and writing into document in my development machine but after deployed to production server(OS Windows 2003 and II6.0) hanging at uno.util.Bootstrap.bootstrap() line.
Dim objDocument As Object
Dim FileNameSource As String = "C:\SysReports\FaceSheet.doc"
Dim localContext As XComponentContext
localContext = uno.util.Bootstrap.bootstrap() //Hanging at this Line
Dim objServiceManager As unoidl.com.sun.star.lang.XMultiServiceFactory
objServiceManager = CType(localContext.getServiceManager(), XMultiServiceFactory)
Plz help to sove this
|
|
|
|
|
Hi i'm a noob, can anyone tell how to host a web page developed in asp? On googling i found out i have to configure IIS. But what if I have a web space like some gmail or google web host space(in labs)...
|
|
|
|
|
Gmail is not a hosting environment, it's an email platform. You need a hosting provider that supports ASP.
I know the language. I've read a book. - _Madmatt
|
|
|
|
|
nonono i 'm talking abt web hosting ... i think i saw in google labs.. will refer and will come back to.. wait..
|
|
|
|
|
Two test pages.
Test 1: Test1.aspx
<%@ Page Language="VB" AutoEventWireup="false" CodeFile="Test1.aspx.vb" Inherits="Test1" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" >
<head runat="server">
<title>Untitled Page</title>
</head>
<body>
<form id="form1" runat="server">
<div>
<p>Test 1 - With codebehind.</p>
<p><asp:Literal runat="server" ID="Output" /></p>
</div>
</form>
</body>
</html>Test1.aspx.vb
Partial Class Test1
Inherits MyCompany.Web.BasePage
Protected Sub Page_PreRender(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.PreRender
Output.Text = MyUser.UserName
End Sub
End Class
----------------------
Test 2: Test2.aspx
<%@ Page Language="VB" Inherits="MyCompany.Web.BasePage" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<script runat="server">
Protected Sub Page_PreRender(ByVal sender As Object, ByVal e As System.EventArgs)
Output.Text = MyUser.UserName
End Sub
</script>
<html xmlns="http://www.w3.org/1999/xhtml" >
<head runat="server">
<title>Untitled Page</title>
</head>
<body>
<form id="form1" runat="server">
<div>
<p>Test 2 - With inline.</p>
<p><asp:Literal runat="server" ID="Output" /></p>
</div>
</form>
</body>
</html>
----------------------
Both pages inherit from a custom class, MyCompany.Web.BasePage, which itself is based on System.Web.UI.Page. The property MyUser is defined in BasePage and contains data about the user accessing the page.
Both pages work just fine when accessed. The difference is when editing the pages: with Test1, MyUser shows up in IntelliSense, I can access the object's properties and everything works exactly as I would expect. With Test2, the use of MyUser is flagged as a "not declared" error, and IntelliSense does not detect any properties on the object.
What is so frustrating is that on my previous development machine, Test2 worked as desired in the IDE. It is only now, after my primary machine had to be replaced (damned hard drive) that this problem has cropped up. Replacing inline code with codebehind is not feasable, as there are hundreds of pages that would have to be rewritten, not to mention overhead from doubling the number of files.
I have no idea why the two different coding styles should suddenly be acting differently. Is there an option checkbox that needs to be marked? Please, help me out!
|
|
|
|
|
IMO you should be using inline script anyway. It is a better design and implementation to separate the presentation from the logic.
I know the language. I've read a book. - _Madmatt
|
|
|
|
|
|
Hi
I have a class which is derived from WebPartZone class. As follows.
LeanWebPartZone : Microsoft.Web.Preview.UI.Controls.WebParts.WebPartZone
In this class, I want to set the helpVerb for providing unique helpPage URL for that webpart. Now, on one webpage I have multiple webparts and each webpart might have different helpPage URL. So, my problem is that, at any given time in LeanWebPartZone class, how do I know for which WebPart I am setting the HelpVerb?
Please advise. Thanks
PankajFollow your goals, Means will follow you ---Gandhi---
|
|
|
|
|
It is the responsibility of the WebPart, not the WebPartZone.
I know the language. I've read a book. - _Madmatt
|
|
|
|
|
|
Hi
I have a user control, which contains 3 panels, which of course lose their scroll positions on post back of the page.
From my own investigation, I know I need to apply some javascript through the onload method of the body tag, and I want to use hidden fields to save the scrollbar positions. However, I am already using this method on a different user control for a different purpose.
Therefore, I have a few questions, which I need help with:
1) How do I pass in the names of the 3 panels on postback?
2) Get scroll positions of those 3 panels, save it the hidden fields, get it back and apply back to the scroll bars?
3) Apply another javascript function to onload method of the body tag in addition to the one that is already there?
Can anyone help?
|
|
|
|
|
If it is only scroll position you are interested in, try putting
MaintainScrollPositionOnPostback="true"
in your @Page directive.
|
|
|
|
|
This will not work as it only applies to the browser scrollbar
|
|
|
|
|
Hi..
My .aspx page has an unordered list. I need to disable few items (< li >). Here are the two approaches that I tried. Both working in IE. None works in Firefox. Please help!
Apporach 1:
============
The
runs at server and the < li >s are dynamically created in the code behind. I declare a variable li as htmlGenericControl and assign the required attributes and add this li to the list. Before adding the li to the list, I used
li.disabled = true;
Approach 2:
===============
In javascript onpageload,
document.getElementById("li1").disabled = true;
both are not working in FF. please help.
Kit.
|
|
|
|
|
hello guyz appreciate all your effort at codeproject. please take a look at my new website.
but i got the error bellow:
Runtime Error
Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local server machine.
Details: To enable the details of this specific error message to be viewable on remote machines, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application. This <customErrors> tag should then have its "mode" attribute set to "Off".
<!-- Web.Config Configuration File -->
<configuration>
<system.web>
<customErrors mode="Off"/>
</system.web>
</configuration>
Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to a custom error page URL.
<!-- Web.Config Configuration File -->
<configuration>
<system.web>
<customErrors mode="RemoteOnly" defaultRedirect="mycustompage.htm"/>
</system.web>
</configuration>Tunsten
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
