Kindly find the below doubt and do his needful on the earliest of tomorrow..... Thx
Make a simple Web form for registration of students and courses. The form should accept first name, last name, faculty number, university (drop-down list), specialty (drop-down list) and a list of courses (multi-select list). Use the appropriate Web server controls. After registration you should display summary of the entered information as formatted HTML. use dynamically generated tags (h1, p, …).
We do not do your homework: it is set for a reason. It is there so that you think about what you have been told, and try to understand it. It is also there so that your tutor can identify areas where you are weak, and focus more attention on remedial action.
Try it yourself, you may find it is not as difficult as you think!
Ideological Purity is no substitute for being able to stick your thumb down a pipe to stop the water
Please read the site's guidance about asking a question. We don't do your [home]work for you, we are all volunteers. Also it is rude to tell people it is urgent: it might be urgent to you, but to me it matters exactle 0% whether you ever finish this or not.
This is called "homework" and it was assigned to YOU, not us. That means YOU "do the needful", not us.
If you think getting anyone else to do your work for you is going to get you a passing grade, think again. There's just too many idiots in this field who don't know their ass from a hole in the ground, and we're not about to create another one by doing your work for you.
You do the work. If you get stuck, the you can ask us questions about the problems you're having.
C:\Work\App is a physical path. You should point to the virtual path.
e.i. If we said that the virtual directory that represent the application root is 'app' then the request path should be 'server/app/resources/file.ext'
if the file 'excelfile.xls' is located on 'C:\directory name\'
and the application is hosted at 'localhost:3358/'
then the request path to the file 'excelfile.xls' is 'localhost:3358/directory name/excelfile.xls'.
I am new to working with deploying a C# web application 2010. I want to use the setup and deploy template in the visual studio .net 2010 ide since that is what the previous programmer(s) used at my company. Right now I am the only programmer at my small company. I also want to mention there are is no written deployment documentation for this web application. I have used the setup and deploy project file that I generated, but it does not install the web form 2010 application to acutally run.
Thus,I am trying to determine what I could have done wrong.
Here are my question:
1. I am not exactly certain what I need to include in the project file for it to work. I can see the files that were generated by theoriginal programmers but I am not certain if I need exactly those files those particular folders.
Thus can you make a recommendation on how I determine what files to include in the deployment.?
2. Also once I deploy the application, I am not certain exactly how to test that the application to that it actually acutally runs. Basically the production application runs on IIS 7. Do you think I should deploy the application to cassini on my workstation and then see if it runs? Thus basically are there directions I can follow to see how I can test the web application? Would I deploy the web application in steps? Should I deploy the web application to cassini, then to iis on a test server?
You have been struggling with this since March 12, 2012. That's almost 2 months now. [First Post^]
I think it's time now for you to purchase a book on ASP.NET, and learn how to deploy your project on a web server. Or perhaps just contract out to someone to do it for you. I think your server admin can do it for you in less than an hour or so.
No insult intended here, but your going round in circles here with the whole process, and you really need to take a large step back to ground zero, and start with something more simple.
For your information, I got the iis work on my workstation, test iis7 and deployed into production on Monday. I am using application pools. My problem was the .net did not know what the startup page was. I just reset it.
I am designing a site that will use ajax panel to load it's controls from an xmlDocument. On the ajax panel I will have several asp:Label, asp:textbox, asp:Listbox, and radgrid controls. Now, my data will consist of the content of nodes from an xmlDocument. How do I populate the ajax panel's controls (bind the data) from the xml tree contained in the xmlDocument?
Also, I was wondering if there was a way to do this in the code behind one setting the value of one control at a time? See what I am doing is filling an xmlDocument onLoad then using it for display through out the whole application.
What I am doing is in the OnLoad page event for the main page I want to load an XMLDocument from a wcf service pulling the data from a list of SharePoint items, then not have to hit the web service again. Next, I want to fill the top level navigation control with the top level nodes of the xmlDocument. Now, once the user selects a menu option I want to populate and display/hide child controls with the detail data and so forth going into more detail with each selection.
I read all 3 of your post, the first one is simplistic in thought, and the others add quite a bit more work to the first.
You should probably start simple and make a listbox, and practice binging your xml data to it until it works properly, then figure out the textbox, and then the radgrid.
Just use the toolbox and drag a Listbox onto the webform, then press F4 on your keyboard, and bind the listbox to your xml source.
If your going to do post 3, then throw everything out the window and start again from scratch. You can't bind to a file downloaded from a web service, because the file would have to have the same name for the bind, presenting the same data to every different user at the same time, defeating the purpose of writing it in the first place.
Thanks for your input. I have now found that SharePoint does have web services that will bring a xmlDocument list data tree to your application code. I guess I was not clear in my post. The data I am pulling into my xmlDocument is static and the same for all application clients. It represents catalog text data for presentation purposes only. I guess what I need to know is the best way to pull node data dynamically from the xmlDocument and use the top level root data for the menu button fields, then use each root's inner nodes to fill the asp textbox controls of the page with inner node data that show specific detailed information about the select root node.
It makes sense to me. And that's what I gathered from reading the 3 posts.
I don't know how to bind the XML nodes to each asp object as you described. I only know how to write it in pure code, using XMLTextWriter or XMLTextReader.
In pure code, I would create 3 arrays, open up the XML Document, read it into memory, quickly close it, and loop through the nodes, and as I loop, if an element name matches, then add the elements data to the proper array, then take each array, and populate the proper control.
I have no clue how to do that with binding, I stopped using that over 8 years ago. Found it to be really slow for high volume web sites.
Once you write code for let's say loading a listbox, it's easy to resuse the code, and faster than binding.
Thanks again for your post. Looping through the xmlDocument was what I was thinking as well. Also, I did not plan to directly bind the xml data directly to the asp/rad controls but what I was going to do was as each root node menu item was selected hide/show the details panel and populate it dynamically at that time. I was hoping someone would have a few code samples.
There might be menu code out there. I remember in the past, people wanted to load a home page menu bar from an XML file, and I remember seeing tons of code for that out there, "ASP.NET xml menu" You can swap out the menu object for the ones you need.
My observations reflect that most people use XML linq to open a xml file to access the elements and values with ease and more performance. I took the hard road and learned XSD, and XMLTextReader, which is lighting fast, but difficult to understand at first.
I would have to see the format of your XML first, before making any recommendations. It depends on how well formed your XML is.
Read your reply and thank you very much! What I am doing is going to have a master page with a rad menu and use your AJAX tool kit to load and unload custom controls, like in your demos. I guess my biggest problem is, with only a single XMLDocument with all of the data contained, iterating through it and pulling out the top root level nodes for the menu. Then once a root level node menu item is selected getting that node's second level child node data to fill the 1st level custom control (i.e. text fields and drop down fields). Then once a second level child node's data dropdown is selected then filling the 2nd custom control with that main root's third level child node data, etc. I don't think I can bind directly anywhere as I feel that some sore of iteration methods must be used. I think the xml will be 3 - 4 levels deep and will be the only data source for my catalog application. Have you had any dealings with such a seniro and if so any good links. The links you sent me before were mostly binding to an xmldatasource, and not using xmlDocument iteration and dynamically loading controls which I must do in my case. In my case binding directly to xml is not an option unless I can pull child node sections in to an xml source that will allow for binding. Any help would be great and as always thanks for your help!
1. You pick the make - FORD - XML with brands, element contains model.xml
2. You pick the model - F150 - XML with years, elements contains year.xml
3. You pick the year - 2012 - and so forth
4. You pick the engine - Triton V10
I would have several XML files for that scenario
I could not see putting that into a single xml file, but if your data is small, then yes.
Well, you have to write the XML file first. Then you have to write the code to read the file, or figure out how to bind the file.
You would have to write code to change bindings on the fly.
Your not really going to find any per-fabricated code for your needs, most of the code samples out there are for a small specific function or need that is common. Most programmers don't give up code, unless you give something back in return, or are getting paid to give away code like at Microsoft.