That can happen for a number of reasons...
0. In newer versions of Windows, you have to tell Windows that you're in a trusted zone or else it blocks certain services. Make sure you've specified that you're in a home or work network as opposed to a public network.
1. Are you sure your wifi network can even access the rest of the network? In some places, the wifi is isolated so that you can't even access the rest of the network or placed in a different subnet so that there's virtual separation.
2. Make sure your adapter doesn't have NetBIOS turned off, not sure if this would cause that problem exactly but it should be on in a work network anyway.
3. Make sure your computer is on the same domain (should be if it works over the wire).
In some Dell models there is also the "F10" (If I'm not mistaken) key to access the recovery partition.
But most times this is a question of timming with the Crt+F11 shortcut.
here is a good guide for the multiple options of recover you might won't to try, and also pros and cons of each :
Turn on the computer, at the "Dell" splash screen hold down CTRL and press F11. Let go of both keys.
I think the trick is to hold CTRL just after you turn it on and then press F11 a few times... eventually you'll get it
Is there a way of working out, why radia wants to reboot your pc for the fourth time?
Contact their helpdesk, ask if there's a technical person who can list the updates. If one of those processes is "in use" on the client's PC, then it cannot be replaced (you can't replace a running executable) and will be replaced on the next boot, just before the login-screen appears. Hence the need for a (4th) reboot.
Ask them if they could set up the patches so that the clients all update at the same time, preferably before office-hours. That would mean that all computers should be booted at that time, but that's when the most clients will not be using their apps, and it should limit the amount of reboots required during the day.
Bastard Programmer from Hell
if you can't read my code, try converting it here[^]
Hello! I read many forums and did not get a competent and accurate answer so I decided to post here.
I have bought a laptop and it has installed Russian language on windows 7 home premium. I know the only way to change the language via the language pack is to upgrade to higher versions but I have the following question: Can I download and install the same version (windows 7 home premium 64bit) with US English now with the same product key with keeping license?
I am slowly getting my Win 7 where I want it.
I like to continue using Briefcase but finding out that it is not an option when New folder is used ( as advertized in Win7 Help ). The only way to get it is via desktop. I would not call it user friendly operation. Is that normal on Win 7 or did I find another problem with my Inspiron?
I also cannot get the “old” XP equivalent of start up programs on start. I need some advice here.
Thanks for the Start-up info, that would’ve been the last place I would look. Appreciate that.
However, I would also appreciate if in the future you do not insult my intelligence making references to "Google it". Been there , done that! FYI - my four year grandson knows how to Google. I guess I need to start posting again that Google references are not necessary.
I think you also misread my comment about Briefcase. Win 7 Help specifically describe how to activate Briefcase after creating New Folder.
There is no such option to do that on my copy of Win 7.
I would also appreciate if in the future you do not insult my intelligence making references to "Google it".
I did not insult your intelligence, nor did I say "Google it". You ask a vague question but give no indication that you have used Google to find any references, so I did it for you. Did you actually follow the link and read any of the entries?
One of these days I'm going to think of a really clever signature.
I have a PC with Windows 7 OS which is having problem booting up.
It runs “DOS” check disk and does not complete it and does not boot.
By accident I changed the vendor's boot to USB and it booted the OS.
I have been unsuccessful changing the setup to boot to USB. The boot precess runs differently each time I try that and never completes.
So it looks like MBR on the HD is kaput. Since I am new to Windows 7 I hope I can get to DOS fdisk and restore the MBR.
Or is there any other newfangled way to to this in Windows 7?
At one point the OS start running “automatic updates” , but started with #40 out of 72.
My guess is that the original update got interrupted and the result is no boot record on HD.
BTW , for 64 bit OS it is painfully slow, but I do not look given horse into mouth.
Thanks for your help.
My laptop is an Acer Extensa 5630Z that currently has 3GB of RAM. That page says I can only uprade to 4GB, but I wonder if that was just a hypothetical maximum, perhaps based on the largest RAM modules available when I bought my laptop. My question is if I could install, say, two of these 4GB sticks for a total of 8GB. My laptop is 64-bit capable, and that RAM is the proper type, so I don't see why there would be an arbitrary limit of 4GB (assuming I install Windows 7 64-bit).
I first tried to ask Acer over a chat if this would be possible, but let's just say I don't have much confidence in the support person's knowledge (he indicated 4GB is the max). Here is the shortened conversation for your review and amusement:
Me: I was considering buying some RAM for my Acer Extensa 5630Z. I was curious if there were any limitations of the size I could install. For example, could I get 2 PC-5300 DIMMs that are each 4GB (for a total of 8GB)? Me: Just as an example, I found some RAM on NewEgg with the description "G.SKILL 4GB 200-Pin DDR2 SO-DIMM DDR2 667 (PC2 5300) Laptop Memory". I was thinking of buying 2 of those. Him: You can upgrade up to maximum of 4 GB. Him: Up to 2 GB of DDR2 667 MHz memory, upgradable to 4 GB using two soDIMM modules. Me: Is that a limitation of the other hardware in the laptop, or was that just the largest amount of memory that was tested, or is that a software limitation? Him: It will tested with maximum memory, and the system performance will affect, if you exceed the maximum memory. Him: You can upgrade up to 4 GB RAM. Me: OK, I just want to be sure there's no chance I could upgrade to 6GB or 8GB. I thought perhaps this type of RAM may not have been available when my laptop was made. Do you know that level of detail? Him: I am sure, your system will compatible up to 4 GB up gradation only.
Have any idea of whether or not I should be able to do more than a "4 GB up gradation"?
Good news and bad news. According to this, the chipset supports 8GB. However, it also says "256-Mb, 512-Mb, 1-Gb, and 2-Gb memory technologies supported". So if the motherboard had 4 RAM slots, maybe it would allow for 8GB, but since there are only 2 slots, maybe it only allows for 4GB. Though, again, I run into the possibility that the largest RAM of this type may have been 2GB when this document was created.
Anyone know how to properly declutter a window 7 laptop. Ive done the Disk Cleanup (inclduing former restore points), defragged and run Piriform CCleaner.
I've found one directory online that got a few meg, but all I can free up is 12.5 G on an 80G disk.
Now I do have the RC for Visual Studio 2012 installed along side VS2008, but that would account for no more than 10G. One or other may have to go but I would prefer to retain 08 until 12 settles in. If pushed 12 gets it!
Looking over the drive using Winzip Utilities, the real perpetrators are thousands of small files that appear to be related to various automatic updates. I tried removing some of them but that caused chaos. The machine is over 4 years old, and was upgraded from Vista to 7 about 15 months ago.
you can use tools like WinDirStats to find where the bulk of you storage is being used. That is always a good starting point. I would also recommend checking to see what processes are running and what programs are installed. Then ask yourself if you still use the programs and if not, remove them. Maybe more your documents and music and such to an external drive.
I would love to change the world, but they won't give me the sourcecode....
Hello all. We developed an app that interacts with Facebook, by posting data to a specific account. This is done by establishing an HTTP request. In my server, this works perfectly. However, when I go to out customer's, it simply won't work.
I know that this guys have very tight security measures. One of those consist on blocking anything to do with Facebook. Now, we requested that for that server and a specific account to be free of such policies. They did so, and when opening the IE, they can connect to Facebook's main page. However, our program still throws a 400 Bad Request.
So I'm wondering if there is anything else blocking such connections. To that end, I downloaded Microsoft Network Monitor 3 and SysInternals TCPView. However, neither shred a light on the situation, other than showing which connections are made.
Thus my question: is there any tool out there that can be used to trace an HTTP connection and then detect where it is being blocked either by a policy or by a firewall? Or a clue on to what could be happening?
Wireshark[^] will show you what's happening "on the wire". If it's local policy, you won't see anything. If it's a firewall, you'll see the 400 coming back. A clue to where it came from would be in the response time - the faster the response, the closer the rejection.
Software rusts. Simon Stephenson, ca 1994. So does this signature. me, 2012
Previously I thought that the difference between pressing the [Del] key alone and the combination [Shift][Del] is that the former one puts the file to the recycle bin, and that's all of the differences.
But no, there is more: I changed the access rights to a file programmatically such that only SYSTEM can access it (OK, there is an inconsistency left: I am still the owner of that file). When I look at its properties, only SYSTEM is shown on the Security tab. When I press the [Enter] key, Notepad is started and tries to open the file, and shows an Access Denied message. When I press [Del], the Access Denied message is shown after a few seconds. But when I press [Shift][Del], the file gets deleted immediately. Happens both in Windows XP and Windows 7.
How can that be explained?
Ok, maybe some cleverer people than myself can help with this one. We have a business-critical application which runs with a MSSQL backend and generates a lot of documents (letters, etc., in Word and PDF format). At present the documents are just stored in a share on the same server as the database, with the filenames stored in a table and the documents called directly from the application on client computers when requested (I didn't design this, by the way!).
A little while ago, due to storage space issues on the server, I decided to move the documents off the server and onto a dedicated NAS (Netgear ReadyNAS 2100) with lots of capacity rather than just beef up the server's disk space. My reasoning was that the network load would be spread between the server and the NAS, instead of the server's NIC handling both database and document traffic. In practice, the performance of opening documents actually decreased dramatically for those departments which I migrated to the NAS, to the point where I halted the migration. Sometimes documents on the NAS open perfectly quickly, and a user will have no speed issues for several minutes or hours. Then, suddenly, one file will take literally a minute or more to open. These are only small Word documents and I'm only talking about a few dozen users who have been migrated.
ANYWAY, what I'm getting to is that it's time to replace all of this hardware anyway. I'm about to purchase a very powerful, fast server to replace the DB server. Reviews suggest that its I/O performance is exceptional. But I was also going to purchase a new, high-performance NAS and stick with the topology I've already described. My theory is that the speed issues are being caused by some deep-level communication problem between the Netgear ReadyNAS and the clients, which neither they nor I have been able to get to the bottom of. It still seems like sound reasoning to me that separating database and documents will result in a spread network load and increased performance. Am I wrong?
I don't know the technicalities involved in opening a document in a network share. Is it perhaps the case that the process of establishing a connection to the share and opening a file, at least the first time in a session, is much slower than opening the same file stored on the database server, to which a 'connection' is already established due to the user having been using the database?
Any discussion or advice on this topic would be greatly appreciated. If stuffing the database server full of disks and keeping the files on there is going to be the fastest solution, I'll save a whole lot of money!
i am going to use Wayne nucleus point of sale machine and i am developing my own back office system to manage data from this POS. is there any documentation on how do i configure my back office system with Wayne nucleus point of sale or it will be more convenient if someone can give me a link to Wayne nucleus technical support team via any email address or phone number.