|
You and I know that but the person that sent this in evidently knows nothing on the subject.
When you talk, you are only repeating what you already know.
But if you listen, you may learn something new.
--Dalai Lama
JaxCoder.com
|
|
|
|
|
And, in lots of areas there is one predominant wind direction. In my place, there is far more wind from the east than from the west.
But one thing I a curious about: If the wind is coming from the north, then N-NW, NW, W-NW, W... and so on, the wind direction goes the entire circle around, and the turbine follows, all the way around. You get the power from the generator down to the ground through quite heavy cables. Will the twist up, just like a rope of hemp? Or is there a mechanism in the wind mill saying "Enough is enough! I must turn of for a little while so I can rotate back to Mark Zero, to unwind the power cord"? Or do they have sliding contacts? The big mills can deliver quite a few megawatts; that puts some requirements to a sliding contact!
Or is the generator steady, the blades rotating around the vertical generator shaft? To me it doesn't look like that from most photos; it looks as if the generator is located behind the blades, with a direct horizontal shaft from the blades to the generator.
I am asking out of pure curiosity and lack of knowledge - windmills are certainly far out of my field of profession!
|
|
|
|
|
Maybe it uses "brushes"; like (some) electric motors.
It was only in wine that he laid down no limit for himself, but he did not allow himself to be confused by it.
― Confucian Analects: Rules of Confucius about his food
|
|
|
|
|
I just googled "rotating electrical connectors" and apparently that's what a "slip ring" does.
Slip ring - Wikipedia[^]
“That which can be asserted without evidence, can be dismissed without evidence.”
― Christopher Hitchens
|
|
|
|
|
This brought "rotating knives" to mind. 
|
|
|
|
|
But can they really transfer 5-10 megawatt of effect (that's what recent windmills can deliver!) across a sliding connection? If you have 0.1% loss, that is still a 10 kW heater! I guess that would be totally unacceptable. So, how large are the losses?
|
|
|
|
|
Crikey! I didn't expect the Spanish Inquisition... 
“That which can be asserted without evidence, can be dismissed without evidence.”
― Christopher Hitchens
|
|
|
|
|
I think you replied to the wrong post, but maybe not! 
|
|
|
|
|
And governors to limit the turn speed as winds get higher.
If you can't laugh at yourself - ask me and I will do it for you.
|
|
|
|
|
Regarding that deer lady: If it is a prank, it is a good one! But really: In quite a few places with lots of moose (for deer as well, but the moose is a bigger problem here), they have actually put up tall fences along the highway for a few hundred meters so the the moose cannot cross, and then a gate, pre-warned by "Moose crossing" signs, a few places even with flashing orange warning lights in season (they are not equally active all year around). In a few places, they have rather built bridges over the four- or six lane motorway for the moose - letting them cross six lanes of cars driving 100 km/h is too dangerous even with controlled crossing points, signs and flashing warning lights.
In Norway, approximately 1500 moose are hit by cars every year, half as many deer, and 4-5000 venison. The moose is by far the most dangerous one, due to their weight and their long legs: When you hit them, they will fall over your hood and come through the windshield.
You proabably cannot read this Norwegian newsstory, but look at the top picture in Moose crash[^]. You don't want to experience something of that sort in 100 km/h!
|
|
|
|
|
Ouch!
When you talk, you are only repeating what you already know.
But if you listen, you may learn something new.
--Dalai Lama
JaxCoder.com
|
|
|
|
|
Member 7989122 wrote: come through the windshield
Same issue with kangaroos here in Aus - that's why trucks have crash barrier/'bull bar' designed to throw the poor kangaroo up over the windshield, you don't want it coming in and kicking you to death
|
|
|
|
|
I've seen similar setups of fences and crossings while traveling the foothills in Arizona.
And I've seen moose/elk crossing signs that were a little more graphic; where the moose is standing in a "charge" stance with his antlers lowered
Director of Transmogrification Services
Shinobi of Query Language
Master of Yoda Conditional
|
|
|
|
|
Google Translate did a pretty good job of translating the story, although the picture pretty much tells the tale -- thankfully no one was in the passenger seat and the driver suffered only minor injuries.
I know from personal experience how much damage a much smaller deer can do. Last Nov my wife & I were driving on a major highway when a deer jumped the cement median and slammed into the front driver's quarter panel of our mini-van. I was in the left lane and had a vehicle on my right, no room to maneuver. I had enough time to say "Oh, no!" before the deer hit us. The deer and I got a moment to look into each other's eyes from a range of 2' as it hit the vehicle, then it was gone.
We were doing 75 mph/120 kph and the deer weighed probably 110-120 lbs (~180 kg). Killed both the deer and the van (destroyed the front quarter, wheel assembly, driver door, and passenger door; damaged the rear quarter panel). The wife & I were shaken up but unharmed. I prefer to not think about what a 440 to 1,500 lb moose would have done ...
|
|
|
|
|
Well, younger me would've fixed the current COVID-19 crisis a long time ago.
I figured, that if you could get sick if sick people coughed on you...
You could get better if healthy people coughed on you 
I was like < 10 years old at the time and still had better ideas about health than a certain world leader who shall remain unnamed
|
|
|
|
|
Go run for president :z
It will also be more complicated than that in a few weeks, and I will make money.
Bastard Programmer from Hell 
If you can't read my code, try converting it here[^]
"If you just follow the bacon Eddy, wherever it leads you, then you won't have to think about politics." -- Some Bell.
|
|
|
|
|
Same thing happens with solar panels at night too!
If you can't laugh at yourself - ask me and I will do it for you.
|
|
|
|
|
When you talk, you are only repeating what you already know.
But if you listen, you may learn something new.
--Dalai Lama
JaxCoder.com
|
|
|
|
|
Have you been to North Norway in summer? 
|
|
|
|
|
Has anyone?
If you can't laugh at yourself - ask me and I will do it for you.
|
|
|
|
|
Maybe not carrying solar panels on their backs, but there are a number of solar panels mounted on the rooftops. So there is some experience, both daytime and nighttime experience.
|
|
|
|
|
It gets even worse when you try to run a computer with the power from the turbines. When the voltages are reversed, everything works backwards. Input ports become output ports, additions suddently are substractions, all signals are inverted and the programs are executed backwards. Half of the logic on your main board is dedicated to preventing this from happening*
* I actually could use some of that logic right now, but for a totally different purpose. If you want to overclock a processor, you have to monitor the core and bus voltages, the clock frequency as well as the processor's temperature very carefully. Having hardware to do this and reducing the clock frequency when the processor gets too hot would be nice. As a bonus, you adjust these things in the BIOS menus, instead of soldering.
I have lived with several Zen masters - all of them were cats.
His last invention was an evil Lasagna. It didn't kill anyone, and it actually tasted pretty good.
|
|
|
|
|
Reverse Logic, that's how I run in the morning before coffee!
When you talk, you are only repeating what you already know.
But if you listen, you may learn something new.
--Dalai Lama
JaxCoder.com
|
|
|
|
|
Believe me, coffee is one of the milder cures for that condition. This thing[^] is works much faster.
I have lived with several Zen masters - all of them were cats.
His last invention was an evil Lasagna. It didn't kill anyone, and it actually tasted pretty good.
|
|
|
|
|
Reminds me of one of my earliest experiences with data communication: This analog, asynchronous modem line driver reported "framing error" all the time. That really meant: Sycnrohizing with the received signal failed. This happened when a single byte was transmitted, but that happened only when the message was a positive ACKnowledge; any NACK (negative ACK) was followed by error data. So until the receiver was fixed, the receiving software was programmed to treat "framing error" as a positive ACK.
That is what I would call true inverted logic.
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
