Every year I've done an e-file tax return, I've used a digital signature. It's definitely a question for legal, though, as the laws and policies governing what is acceptable for digital signatures is going to heavily influence implementation.
You're also setting yourself up to manage PII, so please let me be the first to welcome you to the wonderful world of HIPAA.
"There are three kinds of lies: lies, damned lies and statistics."
- Benjamin Disraeli
First for "local" traffic if the adapters are in different networks with unique address ranges then the decision is based on the target IP address as to which network to use, logical really.
For external addresses not within any of the networks it will tend to be in order of metrics, for some reason the last network added (say you plug in a cable whilst you are on wifi) seems to get pushed to top priority which may be decided on the speed and stability of the cabled network and that it can see the internet or might just be cabled is better than wifi.
To set individual metrics; Open Adapter Properties, double-click IPv4 protocol and click the Advanced button bottom right, there you can set the metrics for IPv4 on that adapter, untick Automatic Metrics and set the adapter you want to be high priority to the lowest value and all the other adapters to higher numbers in order you want them to be searched.
Caveat is that Win 10 ignores this and no matter how you try sets it back to automatic, think it is an open issue at MS.
With ForceBindIP you can bind any Windows application to a specific interface or IP address. It´s freeware"
"ForceBindIP works in two stages - the loader, ForceBindIP.exe will load the target application in a suspended state. It will then inject a DLL (BindIP.dll) which loads WS2_32.DLL into memory and intercepts the bind(), connect(), sendto(), WSAConnect() and WSASendTo() functions, redirecting them to code in the DLL which verifies which interface they will be bound to and if not the one specified, (re)binds the socket. "
I tried switching off IPV6 but it didnt work it shows "DNS request timed out timeout was 2 seconds" almost every time these is the DNS communication as captured by wireshark when I type 'nslookup' and open the program
5 4.080346 192.168.1.6 192.168.1.1 DNS 84 Standard query 0x0001 PTR 22.214.171.124.in-addr.arpa
6 4.336621 192.168.1.1 192.168.1.6 DNS 113 Standard query response 0x0001 PTR 126.96.36.199.in-addr.arpa PTR D-Link.DSL2740B
and when I type 'facebook.com'
21 12.931466 192.168.1.6 192.168.1.1 DNS 81 Standard query 0x0002 A facebook.com.DSL2740B
22 12.965884 192.168.1.1 192.168.1.6 DNS 156 Standard query response 0x0002 No such name A facebook.com.DSL2740B SOA a.root-servers.net
23 12.966017 192.168.1.6 192.168.1.1 DNS 81 Standard query 0x0003 AAAA facebook.com.DSL2740B
29 14.976087 192.168.1.6 192.168.1.1 DNS 72 Standard query 0x0004 A facebook.com
30 14.980174 192.168.1.1 192.168.1.6 DNS 88 Standard query response 0x0004 A facebook.com A 188.8.131.52
(first field is the packet number,second:time,third:source IP fourth:dest IP fifth:protocol sixth:length seventh:description) why is my gateway's name appended on facebook.com (facebook.com.DSL2740B) when I type set type=mx or set type=all the MX and ANY queries are sent and there is no reply any help ??
why is my gateway's name appended on facebook.com (facebook.com.DSL2740B)
This is because it is defined in the DNS Suffix Search List (type 'ipconfig /all' to see what is set). This list is mainly for resolving hosts in your local domain (no need to specify full qualified domains).
To avoid this you can use the nosearch option or append a period (but I'm not sure if using a period is supported by Windows nslookup):
Regarding the timeouts there may be multiple reasons. There may be for example firewalls blocking requests (on your system, on the gateway, or even by your ISP). It may be also a DNS server that responds with delays due to high system or network load.
Did you never got an answer or is it working sometimes (especially after sending the same query again)?
When sending the same query again, the DNS server on your gateway should have stored the result in his local cache meanwhile so that he can answer without forwarding the query.
You should also try to use a known DNS server as suggested by Richard:
nslookup facebook.com. 184.108.40.206
This avoids forwarding the query through the DNS server of your gateway / DSL router to the DNS server of your ISP and should be therefore much faster.
well the DNS server address default is my routers address I changed it to my ISP's DNS server's address and everything works well any idea why this happened only on nslookup while the rest of DNS worked fine ? also : it happened only on one router I moved to another house and it is working with any setting
suppose my pc is in a domain station. if i want to remove it from domain without admin password what i need to do? if i change my harddisk and install new operating system,then it will be free from that domain or not
To make it sort... I found out the computer from where the locks originate... I found event #14 that states, that the password for my account is wrong and I should update it using Credential Manager (but the Credential Manager is empty)
What I can't find is what application/server uses my account on that (not mine at all) computer... My hint is that it is about a service, as it happens also when no one uses the computer, but in the list there is no service listed with my account...
There is a hint how can I identify the process/application tries to use my account?
Skipper: We'll fix it. Alex: Fix it? How you gonna fix this? Skipper: Grit, spit and a whole lotta duct tape.
Hello, I am using a portable chat application via LAN which is placed in local server(Windows server 2012) computer say computer1. I have another Windows server(Windows server 2012) PC in which around 10 people are working. Say that pc as computer2. While working in computer2 we used to access chat application from computer1.
Some time I will update the some features of chat application and replace that in computer1 without any error. Now in order to make latest version of application available to the users of computer2, all the working users in computer2 has to close and then open the chat application. This is the procedure which need to be done in order to open the latest version of app,
1.userA and userB are using chat application, 2.userA, userb both closes the application 3.userA, userb opens the app
Here is my problem,
1.userA and userB are using chat application, 2.userA closes the application but userB still kept that app open. 3.userA opens the app, here userA will get old version instead of new version which is available in computer1.
Why this is happening ? Where windows store the cache ? Is it not possible to make that application to load newer version when a other user is kept open that ? I know I can follow method1 as solution, but it is very difficult to know that all the users are closed the app so that I can inform again to open it.
Does anyone know what the following quoted text means? I have just commissioned a new self-specced machine into which I transferred my Win10 system HD from my old machine. I also transferred my data HDs. Everything looks fine and indeed is fine when I run Win10. There appears to be no difference to the system that was running in my old machine; except, that is, for a cmd.exe that is being run occasionally which produces the following output.
FINDSTR: Cannot open c:\ProgramData\acer\updater2\updater2.xml The system cannot find the path specified. Cannot access file C:\Program Files\DriverSetupUtility\FUB\+ FINDSTR: Cannot open c:\ProgramData\packard bell\updater2\updater2.xml The system cannot find the path specified. Cannot access file C:\Program Files\DriverSetupUtility\FUB\+ FINDSTR: Cannot open c:\ProgramData\gateway\updater2\updater2.xml The system cannot find the path specified. Cannot access file C:\Program Files\DriverSetupUtility\FUB\+ FINDSTR: Cannot open c:\ProgramData\founder\updater2\updater2.xml The system cannot find the path specified.
I can't understand why it is being run and why it is saying that it can't find the specified paths. Essentially, nothing should have changed on the swapped HD. Hmmm, unless, of course, the installation of the motherboard software and the graphics card software has caused the problem. That is the only new software I have installed.