Click here to Skip to main content
13,293,698 members (64,666 online)
Click here to Skip to main content
Add your own
alternative version


18 bookmarked
Posted 26 Apr 2007

How to Unload the Input Method DLL on Pocket PC

, 5 Jan 2008
Rate this:
Please Sign up or sign in to vote.
Shows how to unload the Input Method (IM) DLL for the Software Input Panel (SIP) on Pocket PC, which is important to Input Method uninstallers


Many developers who wrote their own Input Methods (IM) for the Software Input Panel (SIP) on Pocket PC, or those who developed uninstallers for custom Input Methods faced the problem of unloading their DLLs in order to update them or remove them from the device. However it seems a bit hard to find any information on how to achieve this without rebooting the system. This short article aims to solve this problem.


According to the official documentation, the SIP should release the Input Method COM object just after calling of IInputMethod->Deselect() method, i.e. just after another Input Method is selected. And I can confirm the SIP does release it. So it seems that the easiest method would be to simply select another Input Method. This does not work however.

As you know, the COM subsystem does not unload unused DLLs immediately. Instead, it waits for the user code to call CoFreeUnusedLibraries() or CoFreeUnusedLibrariesEx(). The SIP does call the first function, but, unfortunately, this is not enough to unload all unused input methods immediately. Inside this function, the COM subsystem calls DllCanUnloadNow() routine for all DLLs that do not seem to be used anymore and puts all those DLLs that returned S_OK (DLL can be unloaded) into a list of candidates for unloading. When a DLL from this list is needed to the COM again (for example, the application requests to create a new COM object that sits in this DLL), the DLL is removed from this candidate list. If some DLL is still sitting in the candidate list when either CoFreeUnusedLibraries(), or CoFreeUnusedLibrariesEx() is called again, this DLL finally gets unloaded if and only if enough time has passed since putting the DLL into the list.

When using CoFreeUnusedLibrariesEx() this time interval can be specified as the first parameter, but for CoFreeUnusedLibraries() used by the SIP this timeout is the system default value, which is 10 minutes! Quite a long time to ask the user to wait for...


One of the possible ways to workaround this problem would be to call CoFreeUnusedLibrariesEx() from the same process where the SIP lives with zero or near to zero timeout parameter. Fortunately, this is easily to achieve, because the SIP is implemented as a device driver and resides where all device drivers reside--in the device.exe process. So we can create a simple driver, which calls the needed function(s), then load it and enjoy the possibility to remove our DLL. Sure, the input method should be deselected before this. There is also another trick.

The driver would be simpler, if we could call CoFreeUnusedLibrariesEx() from the Init() entry point. This does not work, because the COM subsystem needs the owner process ID to be equal to the current process ID (device.exe), for which we need DLLs to be unloaded. However the owner process ID inside the Init() call is equal to the ID of process which loaded our driver (i.e. our example program), and therefore COM tries to unload COM DLLs for this example application.

To overcome this, we just need to create another thread and do our call from the context of this thread. Owner process ID for this thread is equal to the ID of device.exe, where the SIP and Input Methods live.

Using the Code

The example can be compiled with eVC++ 4.0. There are two projects in the archive: a simple device driver, which when loaded calls CoFreeUnusedLibrariesEx() as described above; and a simple executable that loads this driver.

The driver exposes a minimal set of required entry points (Init/Deinit, Open/Close, IOControl), because we just need it to be loaded into the device.exe, nothing more.


When it is needed to unload the Input Method DLL while an application is being uninstalled from the device via the Remove Programs applet, it is possible to use a Custom Setup DLL as a driver itself by providing needed entry points, i.e. there is no need in a separate DLL.

I hope this article will be helpful to Input Method writers. Do not hesitate to comment or ask any questions.


This article, along with any associated source code and files, is licensed under The Code Project Open License (CPOL)


About the Author

Software Developer
Belarus Belarus
I am an independent professional based in Minsk, Belarus, specializing in embedded and in particular Windows Mobile related software development. I have extensive experience in projects ranging from Windows CE drivers and firmware for AVR and PIC microcontrollers to end-user Windows Mobile and J2ME applications.

If you have any questions related (or unrelated) to my article then feel free to contact me.

You may also be interested in...


Comments and Discussions

General[Message Deleted] Pin
it.ragester28-Mar-09 6:32
memberit.ragester28-Mar-09 6:32 
GeneralGreat! Pin
BitBlaster29-Sep-08 3:17
memberBitBlaster29-Sep-08 3:17 
QuestionCan CoFreeUnusedLibrariesEx() help with DLL load errors? Pin
Udara_G21-Aug-07 6:23
memberUdara_G21-Aug-07 6:23 
AnswerRe: Can CoFreeUnusedLibrariesEx() help with DLL load errors? Pin
Aleh22-Aug-07 10:35
memberAleh22-Aug-07 10:35 
GeneralRe: Can CoFreeUnusedLibrariesEx() help with DLL load errors? Pin
Udara_G22-Aug-07 20:32
memberUdara_G22-Aug-07 20:32 
GeneralThanks a lot Pin
Quentin Pouplard4-Aug-07 8:49
memberQuentin Pouplard4-Aug-07 8:49 
GeneralRe: Thanks a lot Pin
Aleh4-Aug-07 9:03
memberAleh4-Aug-07 9:03 
GeneralI could not download the source files Pin
schwarz.works4-May-07 11:25
memberschwarz.works4-May-07 11:25 
GeneralRe: I could not download the source files Pin
Aleh4-May-07 13:42
memberAleh4-May-07 13:42 
QuestionCan you help with "the IM Select" Problem? Pin
schwarz.works4-May-07 11:21
memberschwarz.works4-May-07 11:21 

General General    News News    Suggestion Suggestion    Question Question    Bug Bug    Answer Answer    Joke Joke    Praise Praise    Rant Rant    Admin Admin   

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.

Permalink | Advertise | Privacy | Terms of Use | Mobile
Web02 | 2.8.171207.1 | Last Updated 5 Jan 2008
Article Copyright 2007 by Aleh
Everything else Copyright © CodeProject, 1999-2017
Layout: fixed | fluid