// Copyright (c) 1995-2009 held by the author(s). All rights reserved.
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions
// are met:
//
// * Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
// * Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer
// in the documentation and/or other materials provided with the
// distribution.
// * Neither the names of the Naval Postgraduate School (NPS)
// Modeling Virtual Environments and Simulation (MOVES) Institute
// (http://www.nps.edu and http://www.MovesInstitute.org)
// nor the names of its contributors may be used to endorse or
// promote products derived from this software without specific
// prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
// FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
// COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
// BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
// LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
// CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
// LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
// ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
// POSSIBILITY OF SUCH DAMAGE.
using System;
using System.Collections.Generic;
using System.Text;
using System.Diagnostics;
using System.Xml.Serialization;
using DISnet.DataStreamUtilities;
namespace DIS1998net
{
/**
* Section 5.3.12.3: Start resume simulation, relaible. COMPLETE
*
* Copyright (c) 2008, MOVES Institute, Naval Postgraduate School. All rights reserved.
* This work is licensed under the BSD open source license, available at https://www.movesinstitute.org/licenses/bsd.html
*
* @author DMcG
* Modified for use with C#:
* Peter Smith (Naval Air Warfare Center - Training Systems Division)
*/
[Serializable]
[XmlRoot]
[XmlInclude(typeof(ClockTime))]
public partial class StartResumeReliablePdu : SimulationManagementWithReliabilityFamilyPdu
{
/** time in real world for this operation to happen */
protected ClockTime _realWorldTime = new ClockTime();
/** time in simulation for the simulation to resume */
protected ClockTime _simulationTime = new ClockTime();
/** level of reliability service used for this transaction */
protected byte _requiredReliabilityService;
/** padding */
protected ushort _pad1;
/** padding */
protected byte _pad2;
/** Request ID */
protected uint _requestID;
/** Constructor */
///<summary>
///Section 5.3.12.3: Start resume simulation, relaible. COMPLETE
///</summary>
public StartResumeReliablePdu()
{
PduType = (byte)53;
}
new public int getMarshalledSize()
{
int marshalSize = 0;
marshalSize = base.getMarshalledSize();
marshalSize = marshalSize + _realWorldTime.getMarshalledSize(); // _realWorldTime
marshalSize = marshalSize + _simulationTime.getMarshalledSize(); // _simulationTime
marshalSize = marshalSize + 1; // _requiredReliabilityService
marshalSize = marshalSize + 2; // _pad1
marshalSize = marshalSize + 1; // _pad2
marshalSize = marshalSize + 4; // _requestID
return marshalSize;
}
///<summary>
///time in real world for this operation to happen
///</summary>
public void setRealWorldTime(ClockTime pRealWorldTime)
{
_realWorldTime = pRealWorldTime;
}
///<summary>
///time in real world for this operation to happen
///</summary>
public ClockTime getRealWorldTime()
{
return _realWorldTime;
}
///<summary>
///time in real world for this operation to happen
///</summary>
[XmlElement(Type= typeof(ClockTime), ElementName="realWorldTime")]
public ClockTime RealWorldTime
{
get
{
return _realWorldTime;
}
set
{
_realWorldTime = value;
}
}
///<summary>
///time in simulation for the simulation to resume
///</summary>
public void setSimulationTime(ClockTime pSimulationTime)
{
_simulationTime = pSimulationTime;
}
///<summary>
///time in simulation for the simulation to resume
///</summary>
public ClockTime getSimulationTime()
{
return _simulationTime;
}
///<summary>
///time in simulation for the simulation to resume
///</summary>
[XmlElement(Type= typeof(ClockTime), ElementName="simulationTime")]
public ClockTime SimulationTime
{
get
{
return _simulationTime;
}
set
{
_simulationTime = value;
}
}
///<summary>
///level of reliability service used for this transaction
///</summary>
public void setRequiredReliabilityService(byte pRequiredReliabilityService)
{
_requiredReliabilityService = pRequiredReliabilityService;
}
[XmlElement(Type= typeof(byte), ElementName="requiredReliabilityService")]
public byte RequiredReliabilityService
{
get
{
return _requiredReliabilityService;
}
set
{
_requiredReliabilityService = value;
}
}
///<summary>
///padding
///</summary>
public void setPad1(ushort pPad1)
{
_pad1 = pPad1;
}
[XmlElement(Type= typeof(ushort), ElementName="pad1")]
public ushort Pad1
{
get
{
return _pad1;
}
set
{
_pad1 = value;
}
}
///<summary>
///padding
///</summary>
public void setPad2(byte pPad2)
{
_pad2 = pPad2;
}
[XmlElement(Type= typeof(byte), ElementName="pad2")]
public byte Pad2
{
get
{
return _pad2;
}
set
{
_pad2 = value;
}
}
///<summary>
///Request ID
///</summary>
public void setRequestID(uint pRequestID)
{
_requestID = pRequestID;
}
[XmlElement(Type= typeof(uint), ElementName="requestID")]
public uint RequestID
{
get
{
return _requestID;
}
set
{
_requestID = value;
}
}
///<summary>
///Automatically sets the length of the marshalled data, then calls the marshal method.
///</summary>
new public void marshalAutoLengthSet(DataOutputStream dos)
{
//Set the length prior to marshalling data
this.setLength((ushort)this.getMarshalledSize());
this.marshal(dos);
}
///<summary>
///Marshal the data to the DataOutputStream. Note: Length needs to be set before calling this method
///</summary>
new public void marshal(DataOutputStream dos)
{
base.marshal(dos);
try
{
_realWorldTime.marshal(dos);
_simulationTime.marshal(dos);
dos.writeByte((byte)_requiredReliabilityService);
dos.writeUshort((ushort)_pad1);
dos.writeByte((byte)_pad2);
dos.writeUint((uint)_requestID);
} // end try
catch(Exception e)
{
Trace.WriteLine(e);
Trace.Flush();
}
} // end of marshal method
new public void unmarshal(DataInputStream dis)
{
base.unmarshal(dis);
try
{
_realWorldTime.unmarshal(dis);
_simulationTime.unmarshal(dis);
_requiredReliabilityService = dis.readByte();
_pad1 = dis.readUshort();
_pad2 = dis.readByte();
_requestID = dis.readUint();
} // end try
catch(Exception e)
{
Trace.WriteLine(e);
Trace.Flush();
}
} // end of unmarshal method
///<summary>
///This allows for a quick display of PDU data. The current format is unacceptable and only used for debugging.
///This will be modified in the future to provide a better display. Usage:
///pdu.GetType().InvokeMember("reflection", System.Reflection.BindingFlags.InvokeMethod, null, pdu, new object[] { sb });
///where pdu is an object representing a single pdu and sb is a StringBuilder.
///Note: The supplied Utilities folder contains a method called 'DecodePDU' in the PDUProcessor Class that provides this functionality
///</summary>
new public void reflection(StringBuilder sb)
{
sb.Append("<StartResumeReliablePdu>" + System.Environment.NewLine);
base.reflection(sb);
try
{
sb.Append("<realWorldTime>" + System.Environment.NewLine);
_realWorldTime.reflection(sb);
sb.Append("</realWorldTime>" + System.Environment.NewLine);
sb.Append("<simulationTime>" + System.Environment.NewLine);
_simulationTime.reflection(sb);
sb.Append("</simulationTime>" + System.Environment.NewLine);
sb.Append("<requiredReliabilityService type=\"byte\">" + _requiredReliabilityService.ToString() + "</requiredReliabilityService> " + System.Environment.NewLine);
sb.Append("<pad1 type=\"ushort\">" + _pad1.ToString() + "</pad1> " + System.Environment.NewLine);
sb.Append("<pad2 type=\"byte\">" + _pad2.ToString() + "</pad2> " + System.Environment.NewLine);
sb.Append("<requestID type=\"uint\">" + _requestID.ToString() + "</requestID> " + System.Environment.NewLine);
sb.Append("</StartResumeReliablePdu>" + System.Environment.NewLine);
} // end try
catch(Exception e)
{
Trace.WriteLine(e);
Trace.Flush();
}
} // end of reflection method
public static bool operator !=(StartResumeReliablePdu a, StartResumeReliablePdu b)
{
return !(a == b);
}
public static bool operator ==(StartResumeReliablePdu a, StartResumeReliablePdu b)
{
if (System.Object.ReferenceEquals(a, b))
{
return true;
}
if (((object)a == null) || ((object)b == null))
{
return false;
}
return a.equals(b);
}
public override bool Equals(object obj)
{
return this == obj as StartResumeReliablePdu;
}
/**
* Compares for reference equality and value equality.
*/
public bool equals(StartResumeReliablePdu rhs)
{
bool ivarsEqual = true;
if(rhs.GetType() != this.GetType())
return false;
ivarsEqual = base.Equals(rhs);
if( ! (_realWorldTime.Equals( rhs._realWorldTime) )) ivarsEqual = false;
if( ! (_simulationTime.Equals( rhs._simulationTime) )) ivarsEqual = false;
if( ! (_requiredReliabilityService == rhs._requiredReliabilityService)) ivarsEqual = false;
if( ! (_pad1 == rhs._pad1)) ivarsEqual = false;
if( ! (_pad2 == rhs._pad2)) ivarsEqual = false;
if( ! (_requestID == rhs._requestID)) ivarsEqual = false;
return ivarsEqual;
}
/**
* HashCode Helper
*/
private int GenerateHash(int hash)
{
hash = hash << 5 + hash;
return(hash);
}
/**
* Return Hash
*/
public override int GetHashCode()
{
int result = 0;
result = GenerateHash(result) ^ base.GetHashCode();
result = GenerateHash(result) ^ _realWorldTime.GetHashCode();
result = GenerateHash(result) ^ _simulationTime.GetHashCode();
result = GenerateHash(result) ^ _requiredReliabilityService.GetHashCode();
result = GenerateHash(result) ^ _pad1.GetHashCode();
result = GenerateHash(result) ^ _pad2.GetHashCode();
result = GenerateHash(result) ^ _requestID.GetHashCode();
return result;
}
} // end of class
} // end of namespace
Submit an article or tip