|
Dear All,
I have DELL LAtitude E6500, WIN XP SP3 is on the machine, and is operating normally.
I am trying to format and re install WINXPSP3 again, but when i boot the CD , things go great for a short time, then a blue screen appears:
"A problem has been detected and windows has been shut down to prevent damage to your computer.
If this is the first time youve seen this stop error screen, restart your computer. if theis screen appears again, follow these steps:
Check for viruses on your computer. Remove any newly installed hard drives or hard drive controllers. check your hard drive to make sure it is properly configured and terminated. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.
Technical information:
STOP: 0x0000007B (0xF78D2524, 0xC00000034. 0x00000000, 0x00000000)"
Any help ???
|
|
|
|
|
|
Thanks alot Richard,
I already read the article , but the solution was little bit easier.
Since "No hard disk found" error doesnot appear, all i did is i turned the SATA into ATA in the SATA CONFIGURATION menu (BIOS).
Best regards,
|
|
|
|
|
After you install the correct chipset for this (you can also do this during boot by pressing F6 and inserting the driver disk), i would switch this back since the performance of this mode is a lot slower then native SATA mode...
Do Or Don't, there is no "try catch ex as exception end try"
|
|
|
|
|
do we have IP SMTP port beside port 25?
Generally SMTP is default with port 25, so do we have another port in SMTP?
thx
Sot
|
|
|
|
|
port '25' is what's known as a 'well known' port, classified by a group called IANA http://www.iana.org/assignments/port-numbers[^]
You can use any port you like really, but you'd be better advised to make it higher than well known and registered ports ..
'g'
|
|
|
|
|
hello
i have one question to post: do we have the way to make MS.Office run faster than before?
because now my MS.Office seem to be slowed when i open some word, excel, MS.Outlook.
thx in advance
Sot
|
|
|
|
|
You have to identify the problem why your computer running slow when you open an office. The better way is suing the performance and counter log tool which is provide by windows in control panel -> administrative tool. This took can give you an information which identify the problem whether it come from the cpu speed or insufficient RAM...
|
|
|
|
|
what is desktop.ini?
why it always show in some folder?
anyone help?
thank
|
|
|
|
|
|
i have one problem with my server machine. this morning i have problem with my time zone, it has been changed by themself without changing by user.
so does anyone know what it cause from?
Din
thanks
|
|
|
|
|
Hi, please check your event viewer in the system section and filter for an event source of W32Time from the date that it cause you a problem. Post its information on this forum which could be easy to address the problem.
Thank,
|
|
|
|
|
please see my w32time:
Time Provider NtpClient: This machine is configured to use
the domain hierarchy to determine its time source, but it is
the PDC emulator for the domain at the root of the forest,
so there is no machine above it in the domain hierarchy to
use as a time source. It is recommended that you either configure
a reliable time service in the root domain, or manually configure
the PDC to synchronize with an external time source. Otherwise,
this machine will function as the authoritative time source in
the domain hierarchy. If an external time source is not configured
or used for this computer, you may choose to disable the NtpClient.
one more is:
The time service has not synchronized the system time for
86400 seconds because none of the time service providers
provided a usable time stamp. The time service is no longer
synchronized and cannot provide the time to other clients or
update the system clock. Monitor the system events displayed
in the Event Viewer to make sure that a more serious problem
does not exist.
thanks
|
|
|
|
|
We are Building our code in two Visual Studio 2005 environments.
I think that there is no difference in two development environments.
However, there is an environment which gives the following error
on running the executables built.
OSVersion : Windows Server 2003.
SYSERR
Error Information :
Error occurred in system call : CreateProcess()
Return Value : -1
Error Number : 22
Error Message : The device does not recognize the command.
|
|
|
|
|
Hi i am Komsot from cambodia:
i have one question to post.
when i create new profile everything is come like to the old profile, but just only in the web browser it has no History list.
Note: i use File & Setting transfer wizard to copy soft from old profile.
i use Mozilla Firefox.
does anyone knows the way to make it has history list from the old profile to the new profile with Mozilla?
thank before hands
Komsot
|
|
|
|
|
dinna wrote: Hi i am Komsot from cambodia:
Your name is dinna. Not komsot.
dinna wrote: when i create new profile everything is come like to the old profile, but just only in the web browser it has no History list.
Note: i use File & Setting transfer wizard to copy soft from old profile.
i use Mozilla Firefox.
Well, as far as I know file and setting transfer wizard seem not cover all setting of an application to the new profile especially the product that might not produce by Microsoft.
I suggest you to read this article[^] which might give you some idea for the task that you need.
Good luck
|
|
|
|
|
Hi All.
The problem I am facing with my symantic Antivirus us that The Auto Enable feature is turned off and was not able to find a permanent solution.
Searched the net and other blogs for the same and came through a solution to that ---- Rx4Defs2.14.exe
But unable to find it even in Symantic Store.
Can anyone help me in getting this..
Thanks
Ish Kumar Kapila
|
|
|
|
|
What's wrong with calling Symantec??
|
|
|
|
|
Dave Kreskowiak wrote: What's wrong with calling Symantec??
Probably the licence ...
In January you said "Money in April" -
That was two years ago!
B. Python
|
|
|
|
|
Yeah, I figuring as much. I hate supporting people who steal their stuff.
|
|
|
|
|
I am using a new firefox version 1.9.0.3306 and also have the adobe reader 9 version installed on my computer.A few days ago I e-mailed [ as an attachment ] someone a newspaper text article and there were no problems as the person at the other end did receive the article.
I had initially downloaded the article onto my computer from a newspaper internet site;by clicking on the "file" button in the top left hand corner of the firefox browser and then choosing [click on] the option that says "save page as ".The downloaded text file was just a ordinary written text page no different that the text on the code project site which I also sometimes download [ the questions and answeres ] to my computer.
After the person had received the newspaper text file that I had e-mailed ; I then tried e-mailing another file as an attachment but the person was not able to receive this second e-mail file even though I tried a couple of times to send it.
This particular text file was packaged in a PDF format by the internet site that I had downloaded it from. When I had initially downloaded that PDF text file onto my computer I just clicked on the pdf button that says "click to save this file to your computer or another location".
Since the person was unable to receive this pdf file ; I decided to erase the pdf text file from my computer and do a new download of the pdf file to my computer but this time I decided not to use the PDF adobe button when downloading the file.
I decided to try using the firefox "file" button that has the "save page as " option.So I re - downloaded the PDF text file to my computer using the firefox toolbar button.The PDF text file was still in a PDF format and had the same adobe icon after I had downloaded the pdf file to my computer.
So I then tried e-mailing this pdf text file as an attachment and that person RECEIVED THE E-MAIL on my first e-mail attempt.
I do not know if any others have experienced this problem or if it is a glitch on the computer I am using which is a DELL dimension 2350 running XP SP2 with no updates including no SP3.
However ; the performance of my Dell computer has been negatively compromised because a couple of months ago I made the mistake of updating the BIOS version AO1 to AO2 and for example I discovered that I could no longer do some of the performance tweeks in the REGEDIT . So I re-downloaded the original AO1 bios version but the DELL Techs on the telephone told me that the AO1 bios version that is on the DELL internet site has ALSO been REVISED which I can tell because although I am now able to do a couple of regedit performance tweaks [more than the AO2 version allows] ; there are still several other REGEDIT tweaks that I can no longer do because of the repressive and exploitative capitalistic sleazy control system.
Winch1020
|
|
|
|
|
Hello,
I'm looking for a (preferably free) simple virus scanner to run under Windows Server 2003 standard edition. The only thing this scanner should do is scan single files uploaded by users and generate a text file with the scan results. This output file will then be read by an application to determine which action to take.
If there's a better alternative to the text file output please let me know.
Any suggestions would be greatly appreciated.
Kind regards,
Wiebe
|
|
|
|
|
|
The file is zero bytes and if I look at the properties, there is no date information. If I try and delete this file using Explorer I get the following error:
Cannot delete file: Cannot read from source file or disk.
From a command prompt I get:
Could not find filename...
I performed a chkdsk but it found no errors.
Does anyone know of any tools or utilities I can use to rid myself of this file? I am running NTFS FWIW.
modified on Monday, February 23, 2009 8:27 AM
|
|
|
|
|
Try Unlocker[^]
![Green Alien | [Alien]](https://codeproject.global.ssl.fastly.net/script/Forums/Images/alien.gif) Kristian Sixhoej
"You can always become better." - Tiger Woods
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
